8.3.5 Configuring trap server properties
Use the nnmtrapconfig.ovpl script to configure trap server properties (nnmtrapserver.properties).
You must use the nnmtrapconfig.ovpl script to edit the nnmtrapserver.properties file. You must not edit this file directly.
The trap server properties are set to the following default values.
Trap server property |
Default value |
|---|---|
com.hp.ov.nms.trapd.udpPort |
162 |
com.hp.ov.nms.trapd.trapInterface |
All interfaces |
com.hp.ov.nms.trapd.recvSocketBufSize |
53,248 kilobytes |
com.hp.ov.nms.trapd.pipeline.qSize |
50,000 traps |
com.hp.ov.nms.trapd.blocking |
true |
com.hp.ov.nms.trapd.blockTrapRate |
50 traps/second |
com.hp.nms.trapd.unblockTrapRate |
50 traps/second |
com.hp.ov.nms.trapd.overallBlockTrapRate |
150 traps/second |
com.hp.nms.trapd.overallUnblockTrapRate |
150 traps/second |
com.hp.ov.nms.trapd.analysis.minTrapCount |
100 traps |
com.hp.ov.nms.trapd.database.fileSize |
100 megabytes |
com.hp.ov.nms.trapd.database.fileCount |
5 files |
com.hp.ov.nms.trapd.database.qSize |
300,000 traps |
com.hp.ov.nms.trapd.discohint.cacheSize |
5,000 entries |
com.hp.ov.nms.trapd.discohint.cacheEntryTimeout |
3,600 millisecond |
For details, see the nnmtrapconfig.ovpl Reference Page.