N.10 Changes in 10-00
- Organization of this subsection
(1) Changes in the manuals 3021-3-001-10, 3021-3-002-10, and 3021-3-003-10
-
Support for the following OSs was added:
-
Microsoft(R) Windows(R) 7 Enterprise
-
Microsoft(R) Windows(R) 7 Professional
-
Microsoft(R) Windows(R) 7 Ultimate
-
Microsoft(R) Windows Server(R) 2003, Datacenter Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Datacenter Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Enterprise Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Standard Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Datacenter x64 Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
-
Microsoft(R) Windows Server(R) 2008 Datacenter
-
Microsoft(R) Windows Server(R) 2008 R2 Datacenter
-
Microsoft(R) Windows Server(R) 2008 R2 Enterprise
-
Microsoft(R) Windows Server(R) 2008 R2 Standard
-
AIX V7.1
-
Red Hat(R) Enterprise Linux(R) 6 (AMD/Intel 64)
-
Red Hat(R) Enterprise Linux(R) 6 (x86)
-
-
The following OSs are no longer supported:
-
AIX 5L V5.3
-
HP-UX 11i V2 (IPF)
-
Solaris 9 (SPARC)
-
-
A description of language type settings was added.
-
jp1hosts2 information can now be used as JP1-specific hosts information
-
JP1/Base can now use IPv6 addresses to communicate.
-
Users with JP1/Base administrator privileges can now use JP1/Base.
-
The event log trapping function now supports event types added in Windows Vista and Windows Server 2008.
-
Log file traps can now monitor log files in SEQ3 and UPD format.
-
Log file traps can now be started using a log-file trap startup definition file.
-
The description of log files that cannot be monitored by a log file trap now includes files in which log information is always recorded at the beginning.
-
Log file traps in HP-UX, Solaris, and AIX can now monitor log information output in UTF-8 encoding.
-
The definitions in the log-file trap startup definition file can now be collected and distributed by the event service.
-
Users can now select whether to monitor the starting and stopping of monitored hosts when using the health check function to monitor a remote host. Accordingly, the following changes were made:
-
The STOP_CHECK parameter was added to the health check definition file.
-
The auto-forward-off flag was added to the options parameter of the event server settings file.
The occurrence conditions for JP1 event 0000474A were also added.
-
Descriptions of the IP address used in an environment with multiple LAN connections were added and changed.
-
A cautionary note was added regarding setting the installation folder when installing JP1/Base in an x64 environment.
-
A description of the default location and permission settings of the JP1/Base installation folder was added.
-
JP1_ITSLM_Admin and Cosminexus_vMNG_Admin were added as default permissions for JP1users in the description of the user management function.
-
To enhance password security, a way to change the password save method was added.
-
A description of how to update the common definition information was added.
-
A cautionary note about registering JP1/Base services with cluster software was added.
-
Descriptions of situations where communication settings need to be changed, and the definition files to use to make those changes have been added and changed.
-
Changes were made to the communication protocol settings file specified when executing the jbssetcnf command.
-
A cautionary note about stopping the event service was added.
-
A procedure for temporarily changing the linked directory server was added.
-
The tasks required when changing the IP of a computer running JP1/Base were changed.
-
A command for checking the status of the log-file trap management service (daemon) was added.
-
A procedure for suppressing the messages output when you execute the jbs_start.cluster command was added.
-
The return values of the following commands were amended:
jbsadduser, jbschgpasswd, jbslistuser, jevexport, jevlogreload
-
The -s option was added to the jevdef_distrib command, allowing for distribution of the definition information in the log-file trap startup definition file.
-
The -s option was added to the jevdef_get command, allowing definition information to be collected from the log-file trap startup definition file. The -r option was also added to allow definition information to be collected for specific hosts.
-
The -x option was added to the jevlogstart command, allowing the output source host name for log data to be set in the JP1_SOURCEHOST extended attribute when converting log entries to JP1 events. Also, the specification of the -s option was made case sensitive.
-
Errors in the format of the jbs_setup_cluster (Windows only) command were corrected.
-
Cautionary notes were added for the following commands:
jbsrt_distrib command, jevexport command
-
The description of the -r option of the jevlogstart command was changed.
-
A cautionary note about specifying batch file names that contain spaces in parameters of the start sequence definition file was added.
-
The instruction not to insert a space or any other characters in front of a parameter name at the start of a line now mentions hash marks (#) (code 0x23).
-
A cautionary note was added regarding the client-bind parameter of the event server settings file, about situations where multiple addresses are specified.
-
A cautionary note has been added about log types in Windows Vista and Windows Server 2008.
-
The log-file trap startup definition file has been added as a distribution definition file.
-
The description of the @action-definition-file-name parameter in the section about distribution definition files was changed.
-
The format of the directory server linkage definition file (Windows only) was amended.
-
The following JP1 events were added:
00003A25, 00003A26, 00003A27, 00003A28, 00003A29, 00003A2A, 00003A30, 00003A31, 00003A32, 00004724, 00004725, 0000474C, 0000474D
-
The PP name of JP1 event 00003A71 is now different depending on whether a remote monitoring event log trap or a JP1/Base event log trap generated the event.
-
The PP name of JP1 events whose ID is the value specified in the ACTDEF parameter of the action definition file is now different depending on whether a remote monitoring log file trap or a JP1/Base log file trap generated the event.
-
The format of the ACTDEF parameter in the action definition file for log file trapping was amended.
-
There is now more information to be collected when troubleshooting errors.
-
The jbs_setup_cluster (Windows only) can now not be executed while JP1/Base is running.
-
Data is now output to additional log files during installation.
-
Remote monitoring logs were added to log file traps and event log traps.
-
The file name of the trace log for the jbs_killall.cluster command was changed.
-
The number of jbscomd_api.exe processes was amended.
-
jelallog was added to the list of UNIX processes.
-
The direction in which jp1bscom data passes through the firewall was added.
-
A note about V5 compatibility in Windows Server 2008 was added to the cautionary notes regarding JP1/SES events.
-
The procedure for outputting data to operations logs was changed.
-
Messages were added, changed, and deleted.
-
Compatible compilers were added, changed, and deleted.
(2) Changes in the manuals 3021-3-301(E), 3021-3-302(E), and 3021-3-303(E)
-
Support for the following OSs was added:
-
Microsoft(R) Windows(R) 7 Enterprise
-
Microsoft(R) Windows(R) 7 Professional
-
Microsoft(R) Windows(R) 7 Ultimate
-
Microsoft(R) Windows Server(R) 2003, Datacenter Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Datacenter Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Enterprise Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Standard Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Datacenter x64 Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
-
Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
-
Microsoft(R) Windows Server(R) 2008 Datacenter
-
Microsoft(R) Windows Server(R) 2008 R2 Datacenter
-
Microsoft(R) Windows Server(R) 2008 R2 Enterprise
-
Microsoft(R) Windows Server(R) 2008 R2 Standard
-
AIX V7.1
-
Red Hat(R) Enterprise Linux(R) 6 (AMD/Intel 64)
-
Red Hat(R) Enterprise Linux(R) 6 (x86)
-
-
The following OSs are no longer supported:
-
AIX 5L V5.3
-
HP-UX 11i V2 (IPF)
-
Solaris 9 (SPARC)
-
-
A description of language type settings was added.
-
jp1hosts2 information can now be used as JP1-specific hosts information
-
JP1/Base can now use IPv6 addresses to communicate.
-
Users with JP1/Base administrator privileges can now use JP1/Base.
-
The event log trapping function now supports event types added in Windows Vista and Windows Server 2008.
-
Log file traps can now monitor log files in SEQ3 and UPD format.
-
Log file traps can now be started using a log-file trap startup definition file.
-
The description of log files that cannot be monitored by a log file trap now includes files in which log information is always recorded at the beginning.
-
Log file traps in HP-UX, Solaris, and AIX can now monitor log information output in UTF-8 encoding.
-
The definitions in the log-file trap startup definition file can now be collected and distributed by the event service.
-
Users can now select whether to monitor the starting and stopping of monitored hosts when using the health check function to monitor a remote host. Accordingly, the following changes were made:
-
The STOP_CHECK parameter was added to the health check definition file.
-
The auto-forward-off flag was added to the options parameter of the event server settings file.
The occurrence conditions for JP1 event 0000474A were also added.
-
-
Descriptions of the IP address used in an environment with multiple LAN connections were added and changed.
-
A cautionary note was added regarding setting the installation folder when installing JP1/Base in an x64 environment.
-
A description of the default location and permission settings of the JP1/Base installation folder was added.
-
JP1_ITSLM_Admin and Cosminexus_vMNG_Admin were added as default permissions for JP1users in the description of the user management function.
-
To enhance password security, a way to change the password save method was added.
-
A description of how to update the common definition information was added.
-
A cautionary note about registering JP1/Base services with cluster software was added.
-
Descriptions of situations where communication settings need to be changed, and the definition files to use to make those changes have been added and changed.
-
Changes were made to the communication protocol settings file specified when executing the jbssetcnf command.
-
A cautionary note about stopping the event service was added.
-
A procedure for temporarily changing the linked directory server was added.
-
The tasks required when changing the IP of a computer running JP1/Base were changed.
-
A command for checking the status of the log-file trap management service (daemon) was added.
-
A procedure for suppressing the messages output when you execute the jbs_start.cluster command was added.
-
The return values of the following commands were amended:
jbsadduser, jbschgpasswd, jbslistuser, jevexport, jevlogreload
-
The -s option was added to the jevdef_distrib command, allowing for distribution of the definition information in the log-file trap startup definition file.
-
The -s option was added to the jevdef_get command, allowing definition information to be collected from the log-file trap startup definition file. The -r option was also added to allow definition information to be collected for specific hosts.
-
The -x option was added to the jevlogstart command, allowing the output source host name for log data to be set in the JP1_SOURCEHOST extended attribute when converting log entries to JP1 events. Also, the specification of the -s option was made case sensitive.
-
Errors in the format of the jbs_setup_cluster (Windows only) command were corrected.
-
Cautionary notes were added for the following commands:
jbsrt_distrib command, jevexport command
-
The description of the -r option of the jevlogstart command was changed.
-
A cautionary note about specifying batch file names that contain spaces in parameters of the start sequence definition file was added.
-
The instruction not to insert a space or any other characters in front of a parameter name at the start of a line now mentions hash marks (#) (code 0x23).
-
A cautionary note was added regarding the client-bind parameter of the event server settings file, about situations where multiple addresses are specified.
-
A cautionary note has been added about log types in Windows Vista and Windows Server 2008.
-
The log-file trap startup definition file has been added as a distribution definition file.
-
The description of the @action-definition-file-name parameter in the section about distribution definition files was changed.
-
The format of the directory server linkage definition file (Windows only) was amended.
-
The following JP1 events were added:
00003A25, 00003A26, 00003A27, 00003A28, 00003A29, 00003A2A, 00003A30, 00003A31, 00003A32, 00004724, 00004725, 0000474C, 0000474D
-
The PP name of JP1 event 00003A71 is now different depending on whether a remote monitoring event log trap or a JP1/Base event log trap generated the event.
-
The PP name of JP1 events whose ID is the value specified in the ACTDEF parameter of the action definition file is now different depending on whether a remote monitoring log file trap or a JP1/Base log file trap generated the event.
-
The format of the ACTDEF parameter in the action definition file for log file trapping was amended.
-
There is now more information to be collected when troubleshooting errors.
-
The jbs_setup_cluster (Windows only) can now not be executed while JP1/Base is running.
-
Data is now output to additional log files during installation.
-
Remote monitoring logs were added to log file traps and event log traps.
-
The file name of the trace log for the jbs_killall.cluster command was changed.
-
The number of jbscomd_api.exe processes was amended.
-
jelallog was added to the list of UNIX processes.
-
The direction in which jp1bscom data passes through the firewall was added.
-
A note about V5 compatibility in Windows Server 2008 was added to the cautionary notes regarding JP1/SES events.
-
The procedure for outputting data to operations logs was changed.
-
Messages were added, changed, and deleted.
-
Compatible compilers were added, changed, and deleted.