Preface

This manual describes the messages output by JP1/Integrated Management 3 - Manager, JP1/Integrated Management 3 - View and JP1/Integrated Management 3 - Agent. In this manual, JP1/Integrated Management 3 - Manager, JP1/Integrated Management 3 - View and JP1/Integrated Management 3 - Agent are generically referred to as JP1/Integrated Management or JP1/IM. In addition, in this manual, read JP1/Integrated Management - Manager, JP1/Integrated Management - View and JP1/Integrated Management - Agent as JP1/Integrated Management 3 - Manager, JP1/Integrated Management 3 - View and JP1/Integrated Management 3 - Agent, respectively.

Organization of this preface

Intended readers
Organization of this manual
Manual suite
Conventions: Fonts and symbols
Conventions: Installation folders for the Windows version of JP1/IM and JP1/Base
Conventions: Meaning of "Administrator permissions" in this manual
Conventions: Version numbers
Online manuals
Output destinations of Integrated trace log file

■ Intended readers

This manual is intended for users who want to investigate the information reported by JP1/IM messages and who want to know how to handle errors. More specifically, it is intended for:

System administrators and system operators who manage and operate JP1/IM to provide centralized monitoring of events that occur in a system.
System administrators and system operators who manage and operate JP1/IM to provide centralized monitoring of the status of the system management infrastructure associated with events that occur in the system.
Those who have knowledge of operating systems and applications

To Page Top

■ Organization of this manual

This manual is organized into the following chapters:

1. Message Overview: Chapter 1 provides an overview of the messages output by JP1/IM - Manager and JP1/IM - View, including their format and output destinations.
2. List of Messages: Chapter 2 describes the messages output by JP1/Integrated Management - Manager and JP1/Integrated Management - View.

To Page Top

■ Manual suite

JP1/IM manuals provide necessary information according to the phase in the system life cycle (the phases include planning/design, configuration, and operation). Read the manual appropriate for the purpose.

The following figure explains which phases the JP1/IM manuals provide information for.

[Figure]

To Page Top

■ Conventions: Fonts and symbols

The following table explains the text formatting conventions used in this manual:

Text formatting	Convention
Bold	Bold characters indicate text in a window, other than the window title. Such text includes menus, menu options, buttons, radio box options, or explanatory labels. For example: From the File menu, choose Open. Click the Cancel button. In the Enter name entry box, type your name.
Italic	Italic characters indicate a placeholder for some actual text to be provided by the user or system. For example: Write the command as follows: `copy` `source-file` `target-file` The following message appears: `A` `file` `was` `not` `found.` `(file` `=` `file-name)` Italic characters are also used for emphasis. For example: Do not delete the configuration file.
`Monospace`	Monospace characters indicate text that the user enters without change, or text (such as messages) output by the system. For example: At the prompt, enter `dir`. Use the `send` command to send mail. The following message is displayed: `The` `password` `is` `incorrect.`

Text formatting

Convention

Bold

Bold characters indicate text in a window, other than the window title. Such text includes menus, menu options, buttons, radio box options, or explanatory labels. For example:

From the File menu, choose Open.
Click the Cancel button.
In the Enter name entry box, type your name.

Italic

Italic characters indicate a placeholder for some actual text to be provided by the user or system. For example:

Write the command as follows:

copy source-file target-file
The following message appears:

A file was not found. (file = file-name)

Italic characters are also used for emphasis. For example:

Do not delete the configuration file.

Monospace

Monospace characters indicate text that the user enters without change, or text (such as messages) output by the system. For example:

At the prompt, enter dir.
Use the send command to send mail.
The following message is displayed:

The password is incorrect.

The following table explains the symbols used in this manual:

Symbol	Convention
`\|`	In syntax explanations, a vertical bar separates multiple items, and has the meaning of OR. For example: `A\|B\|C` means `A`, or `B`, or `C`.
`{` `}`	In syntax explanations, curly brackets indicate that only one of the enclosed items is to be selected. For example: `{A\|B\|C}` means only one of `A`, or `B`, or `C`.
`[` `]`	In syntax explanations, square brackets indicate that the enclosed item or items are optional. For example: `[A]` means that you can specify `A` or nothing. `[B\|C]` means that you can specify `B`, or `C`, or nothing.
`...`	In coding, an ellipsis (`...`) indicates that one or more lines of coding have been omitted. In syntax explanations, an ellipsis indicates that the immediately preceding item can be repeated as many times as necessary. For example: `A,` `B,` `B,` `...` means that, after you specify `A,` `B,` you can specify B as many times as necessary.
`()`	Parentheses indicate the range of items to which the vertical bar (`\|`) or ellipsis (`...`) is applicable.

To Page Top

■ Conventions: Installation folders for the Windows version of JP1/IM and JP1/Base

In this manual, the installation folders for the Windows version of JP1/IM and JP1/Base for Windows are indicated as follows:

Product name	Writing convention for installation folder	Default installation folder^#
JP1/IM - View	`View-path`	`system-drive:\Program Files\Hitachi\JP1CoView`
JP1/IM - Manager	`Manager-path`	`system-drive:\Program Files\Hitachi\JP1IMM`
	`Console-path`	`system-drive:\Program Files\Hitachi\JP1Cons`
	`Scope-path`	`system-drive:\Program Files\Hitachi\JP1Scope`
JP1/IM - Agent	`Agent-path`	`system-drive:\Program Files\Hitachi\JP1IMA`
JP1/Base	`Base-path`	`system-drive:\Program Files\Hitachi\JP1Base`

#: Represents the installation folder when the product is installed in the default location. The location represented by system-drive:\Program Files is determined at the time of installation by an OS environment variable, and might differ depending on the environment.

To Page Top

■ Conventions: Meaning of "Administrator permissions" in this manual

In this manual, Administrator permissions refers to the Administrator permissions for the local PC. Provided that the user has Administrator permissions for the local PC, operations are the same whether they are performed with a local user account, a domain user account, or in an Active Directory environment.

To Page Top

■ Conventions: Version numbers

The version numbers of Hitachi program products are usually written as two sets of two digits each, separated by a hyphen. For example:

Version 1.00 (or 1.0) is written as 01-00.
Version 2.05 is written as 02-05.
Version 2.50 (or 2.5) is written as 02-50.
Version 12.25 is written as 12-25.

The version number might be shown on the spine of a manual as Ver. 2.00, but the same version number would be written in the program as 02-00.

To Page Top

■ Online manuals

JP1/IM comes with an HTML manual that you can read in a web browser.

The HTML manual has the same contents as this manual.

To view the HTML manual:

In JP1/IM - View, choose Help and then Help Contents.
In Integrated Operation Viewer Window, choose Help and then Online manual.

Note:

If you use the Start menu, the HTML manual may be displayed in an existing browser window, depending on the related setting in the OS.

To Page Top

■ Output destinations of Integrated trace log file

Starting with JP1/IM 12-10, all 32-bit Java processes for JP1/IM have been changed to 64-bit Java processes. Therefore, the integrated trace log output destination output by the Java process function of each function of JP1 / IM is changed.

The following is the destination of the integrated trace log for each JP1/IM function from version 12-10 or later. If you are using the log file trap function, you must change the settings as you change the destination.

Output destinations of Integrated trace log file (32 bit): system-drive\Program Files(x86)\Hitachi\HNTRLib2\spool

IM database
Central Scope Service
Process management
Command execution
Automatic action
Installation and Setup

Output destinations of Integrated trace log file (64 bit): system-drive\Program Files\Hitachi\HNTRLib2\spool

Event base service
Central Console viewer
Central Scope viewer
Event Genaration Service
IM Configuration Management
IM Configuration Management viewer
Intelligent Integrated Management Base

To Page Top