7.1.1 Configuration information SID
A configuration information SID represents system configuration information.
There are different classes to configuration information SIDs, some of which are specific to each product while others are used commonly across products. The following table describes the reserved words for the class names used by the individual configuration information SIDs.
No. |
Applicable product |
Class name#1 |
Description |
Name to be specified#2 |
---|---|---|---|---|
1 |
Common |
_HOST_ |
Indicates a host. |
The name of the host |
2 |
JP1/AJS3 |
_JP1AJS-M_ |
Indicates JP1/AJS3 - Manager. |
The name of the host running JP1/AJS3 - Manager |
3 |
_JP1AJS-A_ |
Indicates JP1/AJS3 - Agent. |
The name of the host running JP1/AJS3 - Agent |
|
4 |
_JP1AJSMGR_ |
Indicates JP1/AJS3 - Manager. |
None |
|
5 |
_JP1AJSAGT_ |
Indicates JP1/AJS3 - Agent. |
None |
|
6 |
_JP1AJSSCHE_ |
Indicates the scheduler service of JP1/AJS3. |
None |
|
7 |
_JP1ROOTJOBNET_ |
Indicates a root jobnet. |
The name of the root jobnet |
|
8 |
_JP1ROOTJOBNETDUMMY_ |
Indicates that the preceding node or succeeding node is unknown in link information of a jobnet. |
UNKNOWN |
|
9 |
JP1/AJS3 JP1/IM |
_JP1SCHE_ |
Indicates a scheduler service. |
The name of the scheduler service |
10 |
_JP1JOBG_ |
Indicates a job group. |
The name of the job group |
|
11 |
JP1/PFM |
_JP1PFM-M_ |
Indicates JP1/PFM - Manager. |
The name of the host running JP1/PFM - Manager |
12 |
_JP1PFM-A_ |
Indicates the service ID of JP1/PFM - Agent or JP1/PFM - RM. |
Service ID |
|
13 |
_JP1PFM-AHOST_ |
Indicates the name of the host on which JP1/PFM - Agent or JP1/PFM - RM runs, or the name of a managed host of JP1/PFM - RM. |
The name of the host on which JP1/PFM - Agent or JP1/PFM - RM runs, or the name of a managed host of JP1/PFM - RM |
|
14 |
_JP1PFMMGR_ |
Indicates JP1/PFM - Manager. |
None |
|
15 |
_JP1PFMBASE_ |
Indicates JP1/PFM-Base. |
None |
|
16 |
_JP1AGENTSERVICE_ |
Indicates the service of JP1/PFM - Agent or JP1/PFM - RM. |
None |
|
17 |
JP1/IM JP1/Base |
_JP1IM_ |
Indicates that the host is the JP1/IM integrated manager. |
The name of the host running the JP1/IM integrated manager |
18 |
_JP1IMBASEMGR_ |
Indicates that the host is an IM base or relay manager. |
The name of the host running the IM base or relay manager |
|
19 |
_JP1IMRM_ |
Indicates that the host is a remotely monitored host. |
The name of the remotely monitored host |
|
20 |
_JP1IMMGR_ |
Indicates JP1/IM - Manager. |
None |
|
21 |
_JP1BASE_ |
Indicates that the host runs JP1/Base. |
The name of the host running JP1/Base |
|
22 |
_JP1BASEAGT_ |
Indicates JP1/Base. |
None |
|
23 |
_JP1BASETRAP_ |
Indicates a log file trap or event log trap. |
None |
|
24 |
JP1/IM |
_ROOT_ |
Indicates the root name of the system. |
The root name of the system |
25 |
_SYSTEM_ |
Indicates a system. |
The name of the system |
|
26 |
_CATEGORY_ |
Indicates a category. |
The name of the category |
|
27 |
_SUBCATEGORY_ |
Indicates a subcategory. |
The name of the subcategory |
|
28 |
_OBJECT_ |
Indicates a management object |
The name of the management object |
|
29 |
JP1/NNMi |
_JP1NNMI-M_ |
Indicates JP1/NNMi. |
The name of the host running JP1/NNMi. |
30 |
_JP1NNMI-A_ |
Indicates a node detected by JP1/NNMi. |
The name of the node detected by JP1/NNMi |
|
31 |
_JP1NNMiMGR_ |
Indicates JP1/NNMi. |
None |
|
32 |
_NNMINODE_ |
Indicates a node detected by JP1/NNMi. |
None |
|
33 |
JP1/OA JP1/NNMi JP1/SSO |
_NETWORKDEVICE_ |
Indicates a network device. |
Host name, IP switch name, or FC switch name |
34 |
JP1/OA |
_JP1OA |
Indicates JP1/OA. |
The name of the host running JP1/OA. |
35 |
_JP1OA-A |
Indicates a monitoring target of JP1/OA. |
The name of the monitoring target of JP1/OA |
|
36 |
_JP1OAMGR_ |
Indicates JP1/OA. |
None |
|
37 |
_CONSUMER_ |
Indicates a monitoring target (consumer). |
The name of the consumer |
|
38 |
_CONTAINERCLUSTER_ |
Indicates a monitoring target (container cluster). |
The name of the container environment cluster |
|
39 |
_CONTAINERNODE_ |
Indicates a monitoring target (container node). |
The name of the container environment node |
|
40 |
_SERVERCLUSTER_ |
Indicates a monitoring target (cluster). |
The name of the cluster |
|
41 |
_HYPERVISOR_ |
Indicates a monitoring target (hypervisor). |
The name of the hypervisor |
|
42 |
_VM_ |
Indicates a monitoring target (virtual machine). |
The name of the virtual machine |
|
43 |
_STORAGE_ |
Indicates a monitoring target (storage system). |
The name of the storage system |
|
44 |
_STORAGEVOLUME_ |
Indicates a monitoring target (volume). |
The name of the volume |
|
45 |
JP1/SSO |
_JP1SSO-M_ |
Indicates that the SID is related to an SSO manager. |
The name of the host running JP1/SSO |
46 |
_JP1SSO-A_ |
Indicates that the SID is related to an SSO agent. |
The name of the SSO agent host |
|
47 |
_JP1SSOMGR_ |
Indicates an SSO manager. |
None |
|
48 |
_JP1SSOAGT_ |
Indicates an SSO agent. |
None |
- #1
-
Each class name is 1 to 255 characters long.
- #2
-
Each name must be 0 to 255 characters long, with the exception of the name specified for the object root node class, which must be 1 to 255 characters long.
The configuration information SID has, in addition to the value corresponding to the applicable class, additional information assigned to it in the form of a value specified for value. The following figure shows what the additional information looks like.
|
The following table describes the additional information items specified in the configuration information SID.
No. |
Applicable product |
Variable name |
Description |
---|---|---|---|
1 |
Common |
component |
The component name. It is the component value of the __configurationGet method. This information is specified in all configuration information SIDs. |
2 |
jp1ResourceGroup |
Specify a JP1 resource group name from 1 to 64 characters. The permitted characters are half-width alphanumeric characters and the following half-width symbols: !#$%&'()*-.@\^_`{}~ This variable can be omitted. |
|
3 |
category |
Specify a category from 1 to 255 characters. The permitted characters are half-width alphanumeric characters. For the acceptable values, see Table 4-2 Category IDs that the category variable can accept. This variable can be omitted. |
|
4 |
subCategory |
Specify the abbreviated name of a product from 1 to 255 characters. The permitted characters are characters other than control characters. For JP1 products, this information is represented by a string starting with JP1/. This variable can be omitted. |
|
5 |
visible |
Specify whether to show the component in the Operating status area.
Specify true. |
|
6 |
label |
Specify the display name of a component that is shown in the tree from 1 to 255 characters. The permitted characters are characters other than control characters. For JP1 products, this information is represented by a string starting with JP1/. This variable can be omitted. |
|
7 |
methods |
A list of plug-in functions that can work with the component through the plug-in. This information allows the function to be executed regardless of which product the plug-in belongs to. In order for this to work, it is important that you do not register a product-specific function. Make sure that the name of the function you register starts with an underscore (_). The information for the client to identify whether the plug-in function can work with the node. Considering the scalability of the user plug-in, use return immediately without a plug-in that corresponds to a node causing an error if a method that is not found in methods is invoked. |
|
8 |
property |
Specify property information of each components in object format. The number of elements you can specify ranges from 0 to 100. Property names can accept characters from 1 to 64 characters, other than control characters. Property values can accept characters from 1 to 255 characters, other than control characters. This variable can be omitted.
|
|
9 |
jp1im_TrendData_labels |
When referencing trend data, specifies the label name and label Value associated with SID in object format. The number of elements that can be specified is 0 to 100. You can specify a property name that is from 1 to 255 control characters. The property Value can be from 1 to 2,595 non-control characters. This variable can be omitted. Example of specification: "jp1im_TrendData_labels":{"instance":"host1:9001"} |
|
10 |
JP1/AJS |
jobExecAgentList |
Execution agent name information |
11 |
JP1/PFM |
productId |
Product ID of JP1/PFM - Agent or JP1/PFM - RM |
12 |
dataModelVersion |
Data model version of JP1/PFM - Agent or JP1/PFM - RM |
|
13 |
wcHostName |
Host name of JP1/PFM - Web Console |
|
14 |
portNumber |
Port number of JP1/PFM - Web Console |
|
15 |
protocol |
https communication setting |