2.3.2 When JP1/Base is used as agent

(a) Necessary tasks in JP1/Base

You must first terminate JP1/Base on the manager or agent whose IP address has been changed, and then restart it.

(b) Necessary tasks related to the IM database

When a manager's IP address is changed, you must first terminate the IM database, and then restart it.

(a) IP address that was set using a status change condition for the monitoring object

If an IP address that was set in the Status-Change Condition Settings window or the Common Condition Detailed Settings window needs to be changed, you must change the IP address specification in each setting window.

After setting the IP address, restart the system. For details, see 2.3.2(3) How to restart the system if you change the IP address of the manager or JP1/Base.

(b) Using IM Configuration Management

If you are using IM Configuration Management, start IM Configuration Management - View before collecting host information.

(c) IP address of the host where Intelligent Integrated Management Base runs

After you change the IP address of the host on which the Intelligent Integrated Management Base runs, you need to restart JP1/IM - Manager. In addition, if you are using a plug-in customized by the user, handle the situation according to the specification of the plug-in. For details about how to start JP1/IM - Manager, see 3.1 Starting JP1/IM - Manager.

Note that after you change the IP address of the host serving as the IM management node, you do not have to do anything.