H.3 Connectivity with version 10 products
This section describes the limitations when JP1/IM - View 13-00 is connected to a JP1/IM - Manager 10-00 to 10-50, when a JP1/IM - Manager 13-00 is connected to a JP1/IM - View 10-00 to 10-50, when a JP1/IM - Manager (Intelligent Integrated Management Base) 13-00 is connected to JP1/Base,JP1/AJS,JP1/PFM or other JP1 devices, such as versions 10-00 to 10-50, and when a JP1/IM - Agent 13-00 is connected to JP1/IM - Manager 10-00 to 10-50.
- Organization of this subsection
(1) Restrictions placed when JP1/IM - View 13--00 is connected to JP1/IM - Manager 10-00 to 10-50 (common to all components)
JP1/IM - Manager version |
Restrictions# |
---|---|
1 to 3 |
|
10-00 |
Y |
10-10 |
Y |
10-50 |
Y |
Legend: Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Encrypted communication cannot be established with JP1/IM - Manager. |
2 |
Connection cannot be established with JP1/IM - Manager in a different language environment. |
3 |
Operation log data cannot be output. |
(2) Restrictions placed when JP1/IM - View 13--00 is connected to JP1/IM - Manager 10-00 to 10-50 (when using the Central Console)
JP1/IM - Manager version |
Restrictions# |
||
---|---|---|---|
1 to 3 |
4 to 8 |
9 to 22 |
|
10-00 |
Y |
Y |
Y |
10-10 |
-- |
Y |
Y |
10-50 |
-- |
-- |
Y |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Repeated event conditions cannot be defined. |
2 |
Repeated events for which monitoring is suppressed by repeated event monitoring suppression cannot be displayed in consolidated format. |
3 |
Single sign-on cannot be used to connect to JP1/Navigation Platform. |
4 |
The range of automated-action suppression and the issuance of the event to notify that suppression will continue cannot be specified. |
5 |
Additional severity changing definitions cannot be registered, or severity changing definitions cannot be defined in the Severity Change Definition Settings window. |
6 |
View filters cannot be used on the Severe Events page. |
7 |
Events cannot be highlighted on the Severe Events page. |
8 |
The range of events to be collected at login cannot be set. |
9 |
Display message change settings cannot be specified. |
10 |
Program-specific extended attributes cannot be displayed in the events list in the Event Console window. |
11 |
Program-specific extended attributes cannot be specified in event conditions in the following definitions:
|
12 |
Program-specific extended attributes cannot be specified as item names in event conditions in the following definitions (program-specific extended attributes can be specified as attribute names):
|
13 |
The Suppressed event ID field and the Read Suppressed Event ID From Selected Event button are not displayed in the following windows:
|
14 |
Performance reports of event-source hosts cannot be displayed because the Display Performance menu and the Display Performance button are not displayed in the following pages and windows:
|
15 |
The event attribute values to be inherited by automated actions cannot be Base64 encoded or URL encoded. |
16 |
The JP1/AJS - Web Console monitor window cannot be displayed from the event guide by using single sign-on. |
17 |
You cannot set more than 1,025 repeated event conditions. |
18 |
You cannot set more than 1,025 condition groups in the common exclusion-conditions in extended mode. |
19 |
You cannot specify the status (enabled, disabled) of automated action definitions. |
20 |
When automated action definitions are applied, you cannot inherit the suppression status and the status of satisfied conditions of the AND-joined conditions unless the action definition is edited. |
21 |
You cannot specify items for Target for exclusion in the Common Exclusion-Condition Settings (Extended) window. |
22 |
You cannot inherit arbitrary event attributes and character strings in incident manual-registration to JP1/Service Support from JP1/IM - View. |
(3) Restrictions placed when JP1/IM - View 13-00 is connected to JP1/IM - Manager 10-00 to 10-50 (when using the Central Scope)
JP1/IM - Manager version |
Restrictions# |
---|---|
1 to 5 |
|
10-00 |
Y |
10-10 |
Y |
10-50 |
-- |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Margins of monitoring node icon and monitoring node name cannot be hidden. |
2 |
Transmission factor cannot be set for monitoring node icons. |
3 |
Status colors of monitoring node and monitoring node name cannot be changed. |
4 |
Moving of monitoring node icon cannot be suppressed in the Monitoring Tree and Visual Monitoring windows. |
5 |
Timing of the flashing alarm lamp cannot be changed. |
(4) Restrictions placed when JP1/IM - View 13-00 is connected to JP1/IM - Manager 10-00 to 10-50 (when using IM Configuration Management)
JP1/IM - Manager version |
Restrictions# |
|
---|---|---|
1 to 2 |
3 to 9 |
|
10-00 |
Y |
Y |
10-10 |
-- |
Y |
10-50 |
-- |
Y |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Virtualization management information about KVM or HCSM cannot be set or displayed. |
2 |
Information about a host that holds virtualization management information about KVM or HCSM cannot be edited or deleted. In addition, Unknown is displayed as the host type. |
3 |
Event IDs and log file trap names cannot be set in the event log trap action definitions and remote-monitoring event log trap action definitions. |
4 |
No notification that agent settings for log file trap information might have been changed is sent while the Display/Edit Profiles window is being used. |
5 |
The enable/disable setting for starting processes automatically when the log file trap service is started cannot be changed in the Display/Edit Profiles window. |
6 |
Log file trap information for non-cluster operation cannot be applied by file transmission in the Display/Edit Profiles window. |
7 |
Host information cannot be collected unless the remote monitoring of the host whose host information is to be collected is stopped. |
8 |
In the Remote Monitoring Settings window, SSH connections cannot be set up for individual hosts. |
9 |
You cannot set more than 1,025 hosts in a single business or monitoring group. |
(5) Restrictions placed when JP1/IM - Manager 13-00 is connected to JP1/IM - View 10-00 to 10-50 (common to all components)
JP1/IM - View version |
Restrictions# |
---|---|
1 to 2 |
|
10-00 |
Y |
10-10 |
Y |
10-50 |
Y |
Legend: Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Encrypted communication cannot be established with JP1/IM - View. |
2 |
Connection cannot be established from JP1/IM - View in a different language environment. |
(6) Restrictions placed when JP1/IM - View 10-00 to 10-50 is connected to JP1/IM - Manager 13-00 (when using the Central Console)
JP1/IM - View version |
Restrictions# |
||
---|---|---|---|
1 to 3 |
4 to 8 |
9 to 18 |
|
10-00 |
Y |
Y |
Y |
10-10 |
-- |
Y |
Y |
10-50 |
-- |
-- |
Y |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Repeated event conditions cannot be defined. |
2 |
Repeated events for which monitoring is suppressed by repeated event monitoring suppression cannot be displayed in consolidated format. |
3 |
Single sign-on cannot be used to connect to JP1/Navigation Platform. |
4 |
The range of automated-action suppression and the issuance of the event to notify that suppression will continue cannot be specified. |
5 |
Additional severity changing definitions cannot be registered, or severity changing definitions cannot be defined in the Severity Change Definition Settings window. |
6 |
View filters cannot be used on the Severe Events page. |
7 |
Events cannot be highlighted on the Severe Events page. |
8 |
The range of events to be collected at login cannot be set. |
9 |
Display message change settings cannot be specified and the messages after change cannot be displayed. |
10 |
Program-specific extended attributes cannot be displayed in the events list in the Event Console window. |
11 |
Program-specific extended attributes cannot be specified in event conditions in the following definitions:
|
12 |
Program-specific extended attributes cannot be specified as item names in event conditions in the following definitions (program-specific extended attributes can be specified as attribute names):
|
13 |
The Suppressed event ID field and the Read Suppressed Event ID From Selected Event button are not displayed in the following windows:
|
14 |
Performance reports of event-source hosts cannot be displayed because the Display Performance menu and the Display Performance button are not displayed in the following pages and windows:
|
15 |
The JP1/AJS - Web Console monitor window cannot be displayed from the event guide by using single sign-on. |
16 |
The Action Parameter Definitions window cannot be displayed if you are using an action definition file where DESC_VERSION is 4. |
17 |
If automated actions are set to be excluded in the common exclusion-conditions in extended mode, the following operations cannot be done:
|
18 |
You cannot inherit arbitrary event attributes and character strings in incident manual-registration to JP1/Service Support from JP1/IM - View. |
(7) Restrictions placed when JP1/IM - View 10-00 to 10-50 is connected to JP1/IM - Manager 13-00 (when using the Central Scope)
JP1/IM - View version |
Restrictions# |
---|---|
1 to 5 |
|
10-00 |
Y |
10-10 |
Y |
10-50 |
-- |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Margins of monitoring node icon and monitoring node name cannot be hidden. |
2 |
Transmission factor cannot be set for monitoring node icons. |
3 |
Status colors of monitoring node and monitoring node name cannot be changed. |
4 |
Moving of monitoring node icon cannot be suppressed in the Monitoring Tree and Visual Monitoring windows. |
5 |
Timing of the flashing alarm lamp cannot be changed. |
(8) Restrictions placed when JP1/IM - View 10-00 to 10-50 is connected to JP1/IM - Manager 13-00 (when using IM Configuration Management)
JP1/IM - View version |
Restrictions# |
|
---|---|---|
1 to 2 |
3 to 9 |
|
10-00 |
Y |
Y |
10-10 |
-- |
Y |
10-50 |
-- |
Y |
Legend: Y: Applicable --: Not applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Virtualization management information about KVM or HCSM cannot be set or displayed. |
2 |
Information about a host that holds virtualization management information about KVM or HCSM cannot be edited or deleted. In addition, Unknown is displayed as the host type. |
3 |
No notification that agent settings for log file trap information might have been changed is sent while the Display/Edit Profiles window is being used. |
4 |
The enable/disable setting for starting processes automatically when the log file trap service is started cannot be changed in the Display/Edit Profiles window. |
5 |
Log file trap information for non-cluster operation cannot be applied by file transmission in the Display/Edit Profiles window. |
6 |
Host information cannot be collected unless the remote monitoring of the host whose host information is to be collected is stopped. |
7 |
In the Remote Monitoring Settings window, SSH connections cannot be set up for individual hosts. |
8 |
When an agent configuration is applied by using the differential distribution method, the confirmation dialog box displays KNAN20440-Q, not KNAN20441-Q (the agent configuration is applied by the differential distribution method). |
9 |
You cannot set more than 1,025 hosts in a single business or monitoring group. |
(9) Restrictions placed when JP1/IM - Manager (Intelligent Integrated Management Base) 13-00 is connected to JP1 products whose version is 10-00 to 10-50
JP1/IM - View version |
Restrictions#2 |
|
---|---|---|
1 |
2 |
|
JP1/Base |
-- |
-- |
JP1/AJS#1 |
Y |
-- |
JP1/AJS3-Web Console |
-- |
Y |
JP1/PFM |
-- |
-- |
JP1/PFM - Web Console |
-- |
-- |
Legend: Y: Applicable --: Not applicable
#1: When linking with this version of JP1/AJS, you also have to download the adapter command from the Support Page.
#2: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
Only the functionality provided by versions earlier than JP1/AJS 10-00 to 10-50 is available. |
2 |
A connection cannot be established. |
(10) Restrictions when JP1/IM - Agent 13-00 is cnnected to JP1/IM - Manager 10-00 to 10-50
JP1/IM - Agent 13-00 does not support connecting to a JP1/IM - Manager 10-00 to 10-50.