2.22 Messages from KEOS50000 to KEOS59999 : Messages

KEOS50000-E

The command argument syntax is invalid. (command argument = aa....aa)

aa....aa: Invalid argument

Description: The syntax of the command argument is invalid.
(S): Terminates processing.
(O): Check, and if necessary, revise the command argument.

KEOS50001-E

The environment is invalid. (reason = aa....aa)

aa....aa: Reason

Description: The environment is invalid.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the reason, and then re-execute the processing.

KEOS50002-E

Authentication failed. (user = aa....aa)

aa....aa: User ID used during the authentication failure

Description: The authentication by HCSC-Manager has failed.
(S): Terminates processing.
(O): Check the login user ID and password used to log in to HCSC-Manager.

KEOS50003-E

Authentication failed. (Cosminexus Manager name = aa....aa, host = bb....bb, port = cc....cc, user = dd....dd, details = ee....ee)

aa....aa: Manager name at connection destination

bb....bb: Host name or IP address of connection destination

cc....cc: Port number of connection destination

dd....dd: User ID used during authentication failure

ee....ee: Detailed information

Description: The authentication by the remote management function of Manager failed.
(S): Terminates processing.
(O): Check the login user ID and password used to log in to the Manager's remote management function. If necessary, use the cscpasswd command to change the user ID and password.

KEOS50004-E

The connection failed. (Cosminexus Manager name = aa....aa, host = bb....bb, port = cc....cc, user = dd....dd, details = ee....ee)

aa....aa: Manager name at connection destination

bb....bb: Host name or IP address of connection destination

cc....cc: Port number of connection destination

dd....dd: User ID used during authentication failure

ee....ee: Detailed information

Description: An attempt to connect to the remote management function of Manager failed.
(S): Terminates processing.
(O): Make sure that the Manager's remote management function is started with the target-host-name-or-IP-address:target-port-number.

KEOS50005-E

The format of the object name is invalid. (Cosminexus Manager name = aa....aa, object name = bb....bb, details = cc....cc)

aa....aa: Manager name

bb....bb: Object name

cc....cc: Detailed information

Description: The format of the object name is invalid.
(S): Terminates processing.
(O): Check the value of the target argument (format) in the cscutil command.

KEOS50006-E

The object was not found. (Cosminexus Manager name = aa....aa, object name = bb....bb, details = cc....cc)

aa....aa: Manager name

bb....bb: Object name

cc....cc: Detailed information

Description: The object was not found.
(S): Terminates processing.
(O): Check the value of the target argument (contents) in the cscutil command, and check and if necessary, revise the HCSC server environment.

KEOS50007-E

An exception occurred during the operation. (Cosminexus Manager name = aa....aa, object name = bb....bb, operation = cc....cc, details = dd....dd)

aa....aa: Manager name

bb....bb: Object name

cc....cc: Operation

dd....dd: Detailed information

Description: An error occurred during operations.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the detailed information and then re-execute the processing. If the message ID included in the detail message is at a warning level, the processing may have been completed. If the error cannot be corrected based on the detailed message, check the Management Server's integrated message log information, and the J2EE server's message log information to correct the error.

KEOS50008-E

A communication error occurred. (Cosminexus Manager name = aa....aa, details = bb....bb)

aa....aa: Manager name

bb....bb: Detailed information

Description: A communication error occurred.
(S): Terminates processing.
(O): Check, and if necessary, revise the network, and then re-execute the processing.

KEOS50009-E

File access failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to access the file failed.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the detailed information and then re-execute the processing.

KEOS50010-E

An attempt to read an XML file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to read a repository or user definition failed.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the detailed information and then re-execute the processing.

KEOS50011-E

An attempt to write an XML file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to write to a repository or user definition failed.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the detailed information and then re-execute the processing.

KEOS50012-E

The information was not found. (id = aa....aa)

aa....aa: Distinguished name

Description: The information corresponding to the distinguished name specified from the repository or user definition was not found.
(S): Terminates processing.
(O): Check, and if necessary, revise the command argument or argument definition based on the displayed distinguished name, and then re-execute the processing.

KEOS50013-E

An error occurred while importing the repository.

Description

An error occurred while a repository was being imported.

(S)

Terminates processing.

(O)

Check, and if necessary, revise the path specified as repository route so that it is not too long.

Terminate all processing that is performed by commands and in windows. Check the exception log information and eliminate the cause of the error. After that, contact the system administrator.

KEOS50014-E

The environment is invalid.

Description

The environment is invalid.

(S)

Stops the processing.

(O)

Possible causes and actions are as follows:

The environment variable COSMINEXUS_HOME was not found

Install Cosminexus using the normal method and revise the environment variable.
The command was executed by a user without the administrator permission

A user with administrator permission must execute the command.

KEOS50015-E

An operation was not found. (Cosminexus Manager name = aa....aa, object name = bb....bb, operation = cc....cc, details = dd....dd)

aa....aa: Manager name

bb....bb: Object name

cc....cc: Operation

dd....dd: Detailed information

Description: The operation was not found.
(S): Terminates processing.
(O): Check the value (contents) of the operation argument in the cscutil command.

KEOS50016-E

An attempt to acquire a lock resource has failed. The lock resource is being used.

Description: The lock resource is being used in another process.
(S): Terminates processing.
(O): Re-execute the processing after the process using the locked resource is terminated.

KEOS50017-E

The specified ZIP file name is invalid. (file name = aa....aa)

aa....aa: ZIP file name

Description: The specified ZIP file name is invalid.
(S): Terminates processing.
(O): Check the values specified in the -import and -export options.

KEOS50018-E

The component status is invalid. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc, expected status = dd....dd, current status = ee....ee)

aa....aa: HCSC server name

bb....bb: Component type

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Component name

dd....dd: Expected status of component

ee....ee: Current status of component

deployed: Deployed
active: Started
inactive: Stopped
deleted: Un-deployed

Description: The component status is invalid.
(S): Terminates processing.
(O): Correct the component status and then re-execute the processing.

KEOS50019-I

Communication with the HCSC-Server, for component deployment, will now start. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The component will be allocated.
(S): Resumes processing.

KEOS50020-I

Component distribution to HCSC-Server has ended.

Description: The component is allocated.
(S): Resumes processing.

KEOS50021-I

Communication with the HCSC-Server, for component deletion, will now start. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Type of component to be deleted

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of component to be deleted

Description: The component will be deleted.
(S): Resumes processing.

KEOS50022-I

Communication with the HCSC-Server and component deletion have ended.

Description: The component is deleted.
(S): Resumes processing.

KEOS50023-I

Checking of the component status has started. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc, component status = dd....dd)

aa....aa: HCSC server name

bb....bb: Component type

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Component name

dd....dd: Expected status

deployed: Deployed
active: Started
inactive: Stopped
deleted: Un-deployed

Description: The status of the specified component will be checked.
(S): Resumes processing.

KEOS50024-I

Checking of the component status ended.

Description: The status of the specified component is checked.
(S): Resumes processing.

KEOS50025-W

Linkage unsetup has already been performed. (name of HCSC-Server at linkage source = aa....aa, name of cluster at linkage destination = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: The linkage setup has already been removed.
(S): Terminates processing.
(O): Check the specified HCSC server name and cluster name. Also check whether or not the linkage setup has terminated successfully.

KEOS50026-E

An error occurred while checking defined values in the property file. (key name = aa....aa, value = bb....bb, error type = cc....cc)

aa....aa: Key name

bb....bb: Specified value

cc....cc: Error type

NO_KEY: A required property is not specified.
BAD_KEY: An invalid key has been specified.
INVALID_VALUE: The key value is invalid.

Description: An error occurred while the values defined in the property file were being validated.
(S): Terminates processing.
(O): Check the specifications, and then re-execute the processing.

KEOS50027-E

The version of the repository is invalid. (details = aa....aa)

aa....aa: Detailed information

Description

The version of the repository is invalid.

(S)

Cancels processing.

(O)

If a repository is specified in the argument, confirm that the repository is correct.

If the Service Platform version is upgraded by overwrite installation, the repository information remains in the older version, and therefore, update the repository. For details about how to update the repository, see the description related to migration from an earlier version in Service Platform Setup and Operation Guide.

If the above description is not applicable, use the HCSC-Manager environment backup file, execute the cscenvrestore command, and restore the environment. For details about the cscenvrestore command, in Service Platform Reference Guide.

KEOS50028-I

The program will now confirm that the HCSC-Server is set up. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The program checks whether the HCSC server has been set up.
(S): Resumes processing.

KEOS50029-I

The program has confirmed that the HCSC-Server is set up.

Description: The program confirms that the HCSC server has been set up.
(S): Resumes processing.

KEOS50030-I

Communication with the HCSC-Server, to acquire the HCSC-Server status, will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: A communication with the HCSC server to obtain the HCSC server status will start.
(S): Resumes processing.

KEOS50031-I

Communication with the HCSC-Server and acquisition of the HCSC-Server information are complete.

Description: A communication is performed with the HCSC server and the obtaining of the HCSC server information is completed.
(S): Resumes processing.

KEOS50032-E

The component is already deployed in connected system. (component name = aa....aa, HCSC-Server name = bb....bb)

aa....aa: Component name

bb....bb: HCSC server name

Description: The specified component is already allocated in the connected system.
(S): Terminates processing.
(O): Cancels the linkage setup or remove the component, and then re-execute the processing.

KEOS50033-E

The ZIP file format is invalid. (details = aa....aa)

aa....aa: specified Zip file name

Description: The specified ZIP file is invalid.
(S): Cancels processing.
(O): Specify the correct HCSC-Manager environment backup file.

KEOS50034-E

The cluster was not found in the repository. (cluster name = aa....aa)

aa....aa: Name of the missing cluster

Description: The cluster was not found in the repository.
(S): Terminates processing.
(O): Make sure that the specified cluster name is correct. Additionally, make sure that the setup command ends successfully.

KEOS50035-I

The program is checking the HCSC-Server status. (HCSC-Server name = aa....aa, status = bb....bb)

aa....aa: HCSC server name

bb....bb: Expected status

active: Started
inactive: Stopped
starting: Starting
startfailed: Start error
stopping: Stopping
stopfailed: Stop error

Description: The status of the HCSC server will be checked.
(S): Resumes processing.

KEOS50036-I

The HCSC-Server status has been checked.

Description: The status of the HCSC server is checked.
(S): Resumes processing.

KEOS50037-E

The HCSC-Server status is invalid. (HCSC-Server name = aa....aa, expected status = bb....bb, current status = cc....cc)

aa....aa: HCSC server name

bb....bb: Expected status

cc....cc: Current HCSC server status

active: Started
inactive: Stopped
starting: Starting
startfailed: Start error
stopping: Stopping
stopfailed: Stop error

Description: The status of the HCSC server is invalid.
(S): Terminates processing.
(O): Correct the HCSC server's status.

KEOS50038-I

Unsetup of the HCSC-Server will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The HCSC server setup will be removed.
(S): Resumes processing.

KEOS50039-I

Unsetup of the HCSC-Server was successful.

Description: The HCSC server setup was removed successfully.
(S): Resumes processing.

KEOS50040-I

Logging in to HCSC-Manager will now start.

Description: The login processing to HCSC-Manager starts.
(S): Resumes processing.

KEOS50041-I

The user has logged in to HCSC-Manager.

Description: The user has logged in to HCSC-Manager.
(S): Terminates processing.

KEOS50042-E

An HCSC-Server was not found in the repository. (HCSC-Server name = aa....aa)

aa....aa: Name of the missing HCSC server

Description: The HCSC server was not found in the repository.
(S): Terminates processing.
(O): Make sure that the specified HCSC server name is correct. Also make sure that the setup command has terminated normally.

KEOS50043-I

Setup of the HCSC-Server will now start. (cluster name = aa....aa, HCSC-Server name = bb....bb, initial setup = cc....cc)

aa....aa: Cluster name

bb....bb: HCSC server name

cc....cc: Flag for determining initial setup

true: Initial setup
false: Additional setup

Description: The HCSC server will be set up.
(S): Resumes processing.

KEOS50044-I

Setup of the HCSC-Server was successful.

Description: The setup of the HCSC server is complete.
(S): Resumes processing.

KEOS50045-I

Loading of the system configuration definition file will now start.

Description: The repository will be read.
(S): Resumes processing.

KEOS50046-I

Loading of the system configuration definition file was successful.

Description: The reading of the repository is complete.
(S): Resumes processing.

KEOS50047-E

The system configuration definition file was not found.

Description: The system configuration definition file was not found.
(S): Terminates processing.
(O): Check to see whether the setup command has terminated normally.

KEOS50048-I

An inter-process lock will now be executed. (type = aa....aa)

aa....aa: Lock type

EXCLUSIVE: Exclusive lock
SHARED: Shared lock

Description: An inter-process lock will be executed.
(S): Resumes processing.

KEOS50049-I

The inter-process lock was successful.

Description: The inter-process lock was executed normally.
(S): Resumes processing.

KEOS50050-I

The inter-process lock was released.

Description: The inter-process lock will be released.
(S): Resumes processing.

KEOS50051-I

The inter-process lock was successfully released.

Description: The release of the inter-process lock completed normally.
(S): Resumes processing.

KEOS50052-I

The repository will now be backed up.

Description: The repository will be backed up.
(S): Resumes processing.

KEOS50053-I

The repository was successfully backed up.

Description: The repository backup is complete.
(S): Resumes processing.

KEOS50054-I

Writing of repository information will now start.

Description: The writing of the repository will be executed.
(S): Resumes processing.

KEOS50055-I

Writing of repository information was successful.

Description: The writing of the repository is complete.
(S): Resumes processing.

KEOS50056-E

File backup failed.

Description

An attempt to back up the file failed.

(S)

The processing will end.

(O)

When the cscsvunsetup command is executed

Check the cause of the error, and then take action. After this, specify the -ignore option, and then re-execute the command.
When a command other than cscsvunsetup command is executed

Check the cause of the error, and then take action. After this, re-execute the command.

KEOS50057-I

Communication with the HCSC-Server, to acquire component information, will now start. (HCSC-Server name = aa....aa, component type = bb....bb)

aa....aa: HCSC server name

bb....bb: Type of component for acquiring the information

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

Description: The communication will be performed with the HCSC server to obtain the component information.
(S): Resumes processing.

KEOS50058-I

Communication with the HCSC-Server and acquisition of component information are complete.

Description: A communication is performed with the HCSC server, and the obtaining of the component information is completed.
(S): Resumes processing.

KEOS50059-E

The component was not found in the repository information. (cluster name = aa....aa, component name = bb....bb)

aa....aa: Cluster name

bb....bb: Component name

Description: The component information cannot be obtained from the repository information.
(S): Terminates processing.
(O): Check the cluster name and component name, and then re-execute the processing.

KEOS50062-I

User information will now be changed. (target = aa....aa)

aa....aa: Target

HCSC-Manager: HCSC-Manager
Cosminexus Manager: Management-Server
HCSC-Server: HCSC server

Description: The user information will be changed.
(S): Resumes processing.

KEOS50063-I

User information has been changed. (target = aa....aa)

aa....aa: Target

HCSC-Manager: HCSC-Manager
Cosminexus Manager: Management-Server
HCSC-Server: HCSC server

Description: The user information is changed.
(S): Resumes processing.

KEOS50064-I

Component information will now be acquired from the repository. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The component information will be obtained from the repository information.
(S): Resumes processing.

KEOS50065-I

Component information has been acquired from the repository.

Description: The component information was obtained from the repository information.
(S): Resumes processing.

KEOS50066-E

The component was not found in the repository. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The component information cannot be obtained from the repository information.
(S): Terminates processing.
(O): Check the HCSC server name and component name, and then re-execute the processing.

KEOS50067-E

Failed in the file output of the response from the process re-executed. (output directory = aa....aa, output file name = bb....bb, output encoding = cc....cc)

aa....aa: Output destination directory

bb....bb: Output file name

cc....cc: Output encoding

Description: The file output of the response message from the re-executed process instance failed.
(S): Terminates output processing.
(O): Make sure that the specified directory and encoding are correct.

KEOS50068-I

A response telegram from the re-executed process instance does not exist. (business process definition name = aa....aa, process instance ID = bb....bb)

aa....aa: Business process definition name

bb....bb: Process instance ID

Description: The response message from the re-executed process instance does not exist.
(S): Resumes re-execution processing.

KEOS50069-I

A response telegram from the re-executed process instance was output normally. (output directory = aa....aa, output file name = bb....bb, output encoding = cc....cc)

aa....aa: Output destination directory

bb....bb: Output file name

cc....cc: Output encoding

Description: The response message from the re-executed process instance was output to a file.
(S): Resumes re-execution processing.

KEOS50070-I

Communication with the HCSC-Server, to set up linkage, will now start. (HCSC-Server name = aa....aa, connect cluster name = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: A communication is performed with the HCSC server and the setup process for linking the HCSC servers is executed.
(S): Resumes processing.

KEOS50071-I

Communication with the HCSC-Server and setup of linkage between HCSC-Servers ended normally.

Description: A communication is performed with the HCSC server and the setup process for linking the HCSC servers ended normally.
(S): Resumes processing.

KEOS50072-I

SOAP Fault information has been acquired. (business process definition name = aa....aa, process instance ID = bb....bb, FaultCode = cc....cc, FaultString = dd....dd, FaultActor = ee....ee)

aa....aa: Business process definition name

bb....bb: Process instance ID

cc....cc: Fault code

dd....dd: Fault string

ee....ee: Fault generator

Description: A SOAP Fault occurred during re-execution and the details are obtained.
(S): Resumes re-execution processing.

KEOS50073-E

An error occurred while the service information was being read.

Description: An error occurred while the service information was being read.
(S): Terminates processing.
(O): Examine the cause of the error in the message log, and take appropriate action. Then re-execute the command.

KEOS50074-I

Communication with the HCSC-Server, for unsetup of the linked inter-HCSC-Server, will now start. (name of HCSC-Server at linkage source = aa....aa, name of cluster at linkage destination = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: A communication is performed with the HCSC server and the setup of the linked HCSC servers will be removed.
(S): Resumes processing.

KEOS50075-I

Communication with the HCSC-Server and unsetup of linkage between HCSC-Servers ended normally.

Description: A communication is performed with the HCSC server and the unsetup of the linked HCSC servers ended normally.
(S): Resumes processing.

KEOS50076-E

Repository information cannot be accessed.

Description: The repository information cannot be accessed.
(S): Cancels processing.
(O): Make sure that the path to the repository root is correct. Also, make sure that that HCSC server has been set up.

KEOS50077-E

The specified zip file is invalid. (file name = aa....aa)

aa....aa: ZIP file name

Description: The specified ZIP file is invalid.
(S): Cancels processing.
(O): Make sure that the specified ZIP file exists, that it is a file, and that it can be read. Then re-execute the processing.

KEOS50079-I

User information will now be backed up.

Description: The backup of the user information will start.
(S): Resumes processing.

KEOS50080-I

The backup of user information is complete.

Description: The backup of the user information is complete.
(S): Resumes processing.

KEOS50081-I

Writing of user information will now start.

Description: The writing of the user information will start.
(S): Resumes processing.

KEOS50082-I

Writing of user information is complete.

Description: The writing of the user information is complete.
(S): Resumes processing.

KEOS50083-I

A connection with Cosminexus Manager will now be established. (host to be connected = aa....aa:bb....bb)

aa....aa: IP address of the host to be connected

bb....bb: Port number of the host to be connected

Description: A connection will be established with Manager.
(S): Resumes processing.

KEOS50084-I

A connection with Cosminexus Manager has been established.

Description: A connection is established with Manager.
(S): Resumes processing.

KEOS50085-I

Repository information will now be loaded from the zip file. (file name = aa....aa)

aa....aa: ZIP file name

Description: The repository information will be read from the ZIP file.
(S): Resumes processing.

KEOS50086-I

Loading of repository information from the zip file is complete.

Description: The reading of the repository information from the ZIP file completed normally.
(S): Resumes processing.

KEOS50087-I

Account check is started. (user = aa....aa)

aa....aa: Login user ID

Description: The account authentication will start.
(S): Resumes processing.

KEOS50088-I

Account check was finished normally.

Description: The account authentication was successful.
(S): Resumes processing.

KEOS50089-I

The user is logging out from HCSC-Manager. (user = aa....aa)

aa....aa: Logout user ID

Description: The processing for logging out from HCSC-Manager will start.
(S): Resumes processing.

KEOS50090-I

The user has logged out from HCSC-Manager.

Description: The processing for logging out from HCSC-Manager is complete.
(S): Resumes processing.

KEOS50091-E

The specified user information was not found. (type = aa....aa, name = bb....bb)

aa....aa: type

Cosminexus Manager: Manager information
HCSC-Server: HCSC server information

bb....bb: Name of information that was not found

Description: The specified name was not found in the user information.
(S): Cancels processing.
(O): Check if the specified name is correct. If the specified name is correct, make sure that the HCSC server has been set up successfully.

KEOS50092-E

The linkage information cannot be added because it is within the same cluster. (name of HCSC-Server at linkage source = aa....aa, name of cluster at linkage destination = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: The linkage information cannot be added because it is within the same cluster.
(S): Cancels processing.
(O): Check if the specified name is correct.

KEOS50093-I

The program is checking whether the cluster is set up. (cluster name = aa....aa)

aa....aa: Cluster name

Description: The program will check whether the cluster has been set up.
(S): Resumes processing.

KEOS50094-I

The program is checking whether cluster has been set up.

Description: The program has checked whether the cluster has been set up.
(S): Resumes processing.

KEOS50095-E

A cluster does not exist in the repository. (cluster name = aa....aa)

aa....aa: Cluster name

Description: A cluster does not exist in the repository.
(S): Cancels processing.
(O): Check if the specified name is correct. If the specified name is correct, make sure that the HCSC server has been set up successfully.

KEOS50096-E

A connection timeout occurred. (Cosminexus Manager name = aa....aa, host = bb....bb, port = cc....cc, user = dd....dd, details = ee....ee)

aa....aa: Manager name at connection destination

bb....bb: Host name or IP address of connection destination

cc....cc: Port number of connection destination

dd....dd: User ID

ee....ee: Detailed information

Description: A connection timeout occurred.
(S): Cancels processing.
(O): Check, and if necessary, revise the network, and then re-execute the processing.

KEOS50097-E

A read timeout occurred. (Cosminexus Manager name = aa....aa, details = bb....bb)

aa....aa: Manager name at connection destination

bb....bb: Detailed information

Description: A read timeout occurred.
(S): Cancels processing.
(O): Check, and if necessary, revise the network and communication timeout definition ([cscmng.properties]cscmng.manager.manager's-distinguished-name.timeout), and then re-execute the processing.

KEOS50098-E

A component name is duplicated. (component name = aa....aa, cluster name = bb....bb, cluster name = cc....cc)

aa....aa: Component name

bb....bb: Cluster name

cc....cc: Cluster name

Description: A component is duplicated.
(S): Cancels processing.
(O): Delete the duplicate component. Alternatively, cancel the linkage service setup.

KEOS50099-I

The status of the specified linkage information will now be checked. (HCSC-Server name = aa....aa, name of the cluster at the connection destination = bb....bb, status = cc....cc)

aa....aa: HCSC server name

bb....bb: Name of the cluster at the linkage destination

cc....cc: Expected status

CONNECT: Connected
ONLINE: Link started
OFFLINE: Link stopped
ONLINE_WAIT: Waiting for response to link start request
OFFLINE_WAIT: Waiting for response to link termination request
IO_ERROR: Waiting for termination response in the event of link start error
SERVICE_STOP: Link blocked
DISCONNECT: Disconnected

Description: The status of the specified linkage information will be checked.
(S): Resumes processing.

KEOS50100-I

The status of the specified linkage information has been checked.

Description: The status of the specified linkage information is checked.
(S): Resumes processing.

KEOS50101-E

The linkage information status is invalid. (HCSC-Server name = aa....aa, name of the connection destination cluster = bb....bb, expected status = cc....cc, current status = dd....dd)

aa....aa: HCSC server name

bb....bb: Name of the cluster at the linkage destination

cc....cc: Expected status of the linkage information

dd....dd: Current status of the linkage information

CONNECT: Connected
ONLINE: Link started
OFFLINE: Link stopped
ONLINE_WAIT: Waiting for response to link start request
OFFLINE_WAIT: Waiting for response to link termination request
IO_ERROR: Waiting for termination response in the event of link start error
SERVICE_STOP: Link blocked
DISCONNECT: Disconnected

Description: The linkage information status is invalid.
(S): Terminates processing.
(O): Correct the linkage information to the matching status, and then re-execute the processing.

KEOS50102-E

The setup information is invalid.

Description: The setup information is invalid.
(S): Terminates processing.
(O): Check, whether or not the setup, unsetup, deployment, or deletion command that was executed immediately before, has been terminated normally.

KEOS50103-E

An error occurred during loading of setup information. (details = aa....aa)

aa....aa: Error details

Description: An error occurred while the setup information was being loaded.
(S): Terminates processing.
(O): Check the detailed error information, take an appropriate action, and then re-execute the processing.

KEOS50104-E

An error occurred during updating of setup information. (details = aa....aa)

aa....aa: Error details

Description: An error occurred while the setup information was being updated.
(S): Terminates processing.
(O): There may be inconsistencies between the setup information and execution environment. Terminate all HCSC-Manager processing, and then contact the customer engineer.

KEOS50105-I

Setup information will now be backed up.

Description: The setup information will be backed up.
(S): Resumes processing.

KEOS50106-I

The backup of setup information is complete.

Description: The backup of the setup information is complete.
(S): Resumes processing.

KEOS50107-I

Writing of setup information will now start.

Description: The writing of the repository information will be executed.
(S): Resumes processing.

KEOS50108-I

Writing of setup information is complete.

Description: The writing of the repository information is complete.
(S): Resumes processing.

KEOS50109-E

A cluster does not exist in the setup information. (cluster name = aa....aa)

aa....aa: Cluster name

Description: A cluster was not found in the setup information.
(S): Terminates processing.
(O): Check if the specified name is correct. If the specified name is correct, make sure that the HCSC server has been set up successfully.

KEOS50110-E

An HCSC-Server does not exist in the setup information. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: An HCSC server was not found in the setup information.
(S): Terminates processing.
(O): Check if the specified name is correct. If the specified name is correct, make sure that the HCSC server has been set up successfully.

KEOS50111-E

The repository did not exist when the repository import operation was executed.

Description: The repository did not exist for executing the import operation.
(S): Terminates processing.
(O): Perform setup, create a repository, and then execute the processing.

KEOS50112-I

User information will now be loaded.

Description: The user information will be read.
(S): Resumes processing.

KEOS50113-I

Loading of user information is complete.

Description: The reading of the user definition is complete.
(S): Resumes processing.

KEOS50114-E

Backup failed during import of the repository. (details = aa....aa)

aa....aa: Error details

Description

A backup attempt failed during the import of the repository.

(S)

Terminates processing.

(O)

Check the cause of the error and take an appropriate action. Then re-execute the command. Possible error causes:

There is no directory permission.
The directory hierarchies are too deep.

KEOS50115-E

An error occurred during checking of the HCSC-Server configuration definition file. (file name = aa....aa)

aa....aa: HCSC server configuration definition file name

Description: An error occurred while the HCSC server configuration definition file was being validated.
(S): Terminates processing.
(O): Check the KEOS52142-E message and take an appropriate action.

KEOS50116-I

Communication with the HCSC-Server, to set the HCSC-Server runtime definition, will now start. (HCSC-Server name = aa....aa, HCSC-Server runtime definition file name = bb....bb)

aa....aa: HCSC server name

bb....bb: HCSC server runtime definition file name

Description: The setup of the HCSC server runtime definition will start.
(S): Resumes processing.

KEOS50117-I

Setup of the runtime definition has ended. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The setup of the HCSC server runtime definition will end.
(S): Resumes processing.

KEOS50118-I

Communication with the HCSC-Server, to acquire the HCSC-Server runtime definition, will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The processing to obtain the HCSC server runtime definition will start.
(S): Resumes processing.

KEOS50119-I

Acquisition of the runtime definition has ended. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The processing to obtain the HCSC server runtime definition will end.
(S): Resumes processing.

KEOS50120-E

Repository information was not found. (details = aa....aa)

aa....aa: Information that was not found

Description: The repository information was not found.
(S): Terminates processing.
(O): Check if the specified ZIP file is correct, and then re-execute the processing.

KEOS50121-W

Linkage setup is incomplete. aa....aa->bb....bb:cc....cc, dd....dd->ee....ee:ff....ff)

aa....aa: Name of the cluster at the linkage source

bb....bb: Name of the cluster at the linkage destination

cc....cc: Linkage status

connected: Connected
disconnected: Not connected

dd....dd: Name of the cluster at the linkage source

ee....ee: Name of the cluster at the linkage destination

ff....ff: Linkage status

connected: Connected
disconnected: Not connected

Description: The linkage setup is incomplete.
(S): Resumes processing.
(O): Perform linkage setup so that it becomes unique between the clusters or cancel the linkage setup.

KEOS50122-W

Setup of linkage from aa....aa to bb....bb is incomplete. (info = cc....cc)

aa....aa: Name of the cluster at the linkage source

bb....bb: Name of the cluster at the linkage destination

cc....cc: Linkage information

HCSC server name: Output in the 'linkage information, ...' format. The linkage information is as follows:

connected: Connected

disconnected: Not connected

Description: The linkage setup is incomplete.
(S): Resumes processing.
(O): Perform linkage setup so that it becomes unique between the clusters or cancel the linkage setup.

KEOS50123-W

Component deployment information is inconsistent regarding the cluster. (component name = aa....aa, cluster = bb....bb info = cc....cc)

aa....aa: Component name

bb....bb: Cluster name

cc....cc: Deployment status

HCSC server name: Output in the 'deployment information, ...' format. The deployment information is as follows:

deployed: Deployed

deleted: Un-deployed

Description: The component allocation information does not match for the clusters.
(S): Resumes processing.
(O): Deploy components so that the component deployment information becomes unique within the cluster, or remove the components.

KEOS50124-E

The loaded system configuration definition information is invalid. (details = aa....aa)

aa....aa: Detailed information

Description: The system configuration definition information that was read is incorrect.
(S): Terminates processing.
(O): Check if the system configuration definition information is correct, and then re-execute the processing.

KEOS50125-E

An error occurred during writing of setup information.

Description: An error occurred during the writing of the setup information.
(S): Terminates processing.
(O): Terminate all processing that is performed by commands and in windows. Check the exception log information and eliminate the cause of the error. After that, contact the system administrator.

KEOS50126-I

Communication with the HCSC-Server, to acquire linkage information, will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: A communication will be performed with the HCSC server to obtain the linkage information.
(S): Resumes processing.

KEOS50127-I

Communication with the HCSC-Server and acquisition of component information are complete.

Description: A communication is performed with the HCSC server and the obtaining of the component information is completed.
(S): Resumes processing.

KEOS50128-E

An attempt to close a connection has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to close a connection failed.
(S): Resumes processing.
(O): Check the detailed information.

KEOS50129-I

Connection close is started.

Description: The connection will be closed.
(S): Resumes processing.

KEOS50130-I

Connection close was finished normally.

Description: The connection is closed.
(S): Resumes processing.

KEOS50131-E

Cannot delete backup information. (type = aa....aa)

aa....aa: Type that could not be deleted

passwd: Password management information
setup: Setup information
repository: Repository information
import: Temporary information for importing the repository

Description: The file could not be deleted.
(S): Resumes processing.
(O): Make sure that the user has read, write, and delete permissions for the HCSC-Manager installation directory and all of its subdirectories.

KEOS50132-E

The value specified for cscmng.properties is invalid. (key = aa....aa, value = bb....bb, reason = cc....cc)

aa....aa: Definition

bb....bb: Value

cc....cc: Reason

not exist: Does not exist
not directory: Not a directory
cannot read: No read permission
cannot write: No write permission

Description

The value specified in cscmng.properties is invalid.

(S)

Terminates processing.

(O)

Check the specifications for the definition.

Also, check whether the directory access permissions are given correctly.

KEOS50133-E

The file exists in the backup directory. (type = aa....aa)

aa....aa: Type that could not be deleted

repository: Repository information
import: Temporary information for importing the repository

Description

The file exists in the backup directory.

(S)

The processing will end.

(O)

Check that the command executed immediately before has terminated successfully.

Also, check for troubleshooting, and restore the file. For details about troubleshooting, see in Service Platform Setup and Operation Guide.

KEOS50134-I

The deletion of user information backed up is started.

Description: The backed up user information will be deleted.
(S): Resumes processing.

KEOS50135-I

The deletion of user information backed up was finished normally.

Description: The backed up user information is deleted.
(S): Resumes processing.

KEOS50136-I

The deletion of repository backed up is started.

Description: The backed up repository information will be deleted.
(S): Resumes processing.

KEOS50137-I

The deletion of repository backed up was finished normally.

Description: The backed up repository information is deleted.
(S): Resumes processing.

KEOS50138-I

The deletion of setup information backed up is started.

Description: The backed up setup information will be deleted.
(S): Resumes processing.

KEOS50139-I

The deletion of setup information backed up was finished normally.

Description: The backed up setup information is deleted.
(S): Resumes processing.

KEOS50140-W

An error occurred in deletion backed up information. (type = aa....aa)

aa....aa: Type that could not be deleted

repository: Repository information
import: Temporary information for importing the repository

Description: An attempt to delete the backup information failed.
(S): The processing continues.
(O): Check if the user has the read, write, and delete permissions for COSMINEXUS_HOME-installation-directory/ CSC and all of its subdirectories. After that, contact the system administrator.

KEOS50141-W

The cluster at the linkage destination does not exist. (HCSC-Server name = aa....aa cluster name = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at linkage destination

Description: The cluster at the linkage destination does not exist.
(S): Resumes processing.
(O): Delete the linkage information using the linkage unsetup command.

KEOS50142-W

An added reception type differs between the HCSC-Server instances in the cluster. (cluster name = aa....aa, details = bb....bb)

aa....aa: Cluster name

bb....bb: Detailed information

HCSC-server-name:reception-type=ON: The reception type is set up
HCSC-server-name:reception-type=OFF: The reception type is not set up

Description

The reception information in the cluster is inconsistent.

(S)

Resumes processing.

(O)

The reception information in the cluster is inconsistent.

Execute the HCSC server setup or unsetup command to obtain consistent acceptance types.

KEOS50143-W

A reception type differs between the HCSC-Server instances in the cluster. (cluster name = aa....aa reception type = bb....bb, details = cc....cc)

aa....aa: Cluster name

bb....bb: Reception type

reception-ejb: EJB reception
reception-jms: JMS reception
reception-soap: SOAP reception
reception-dbq: DBQ reception

cc....cc: Detailed information

HCSC-server-name:Setup-value

Description

The contents of the reception information in the cluster are inconsistent.

(S)

Resumes processing.

(O)

The reception information in the cluster is inconsistent.

Execute the HCSC server setup or unsetup command to obtain consistent acceptance types.

KEOS50144-I

The ZIP import will now start.

Description: The import of the ZIP file will start.
(S): Resumes processing.

KEOS50145-I

The ZIP import was successful.

Description: The ZIP was imported successfully.
(S): Resumes processing.

KEOS50146-E

There is no convertible communication with the HCSC-Server. (Cosminexus Manager name = aa....aa)

aa....aa: Manager name at connection destination

Description: The communication with the HCSC server is incompatible.
(S): Terminates processing.
(O): You match the versions of the communication source and the communication destination.

KEOS50147-I

The conversion with the HCSC-Server will be checked. (Cosminexus Manager name = aa....aa)

aa....aa: Manager name at connection destination

Description: The compatibility with the HCSC server will be checked.
(S): Resumes processing.

KEOS50148-I

The conversion with the HCSC-Server has been checked.

Description: The compatibility of communication with the HCSC server is checked.
(S): Resumes processing.

KEOS50149-E

The version of system configuration definition file is invalid. (details = aa....aa)

aa....aa: Detailed information

Description: The version of the system configuration definition is invalid.
(S): Cancels processing.
(O): Check if the repository is correct, and then re-execute the processing.

KEOS50150-E

Batch operations for a cluster can only be executed for a load-balanced cluster.

Description: The batch operations for a cluster can only be executed for a load-balancing cluster.
(S): Terminates processing.
(O): Execute operations on each HCSC server.

KEOS50151-E

There is no corresponding function in HCSC-Server. (Cosminexus Manager name = aa....aa)

aa....aa: Manager name at connection destination

Description: There is no functional compatibility with the HCSC server.
(S): Terminates processing.
(O): Check the version of the HCSC server, and upgrade the version as needed.

KEOS50152-I

Communication with the HCSC-Server will be performed, and then processing to apply the settings in the component runtime definition will start. (HCSC-Server name = aa....aa, component name = bb....bb, component runtime definition file name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component name

cc....cc: Component runtime definition file name

Description: The setup of the component runtime definition will start.
(S): Resumes processing.

KEOS50153-I

Processing to apply the settings in the component runtime definition will now end. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The setup of the component runtime definition will end.
(S): Resumes processing.

KEOS50154-I

Communication with the HCSC-Server will be performed, and then processing to acquire the component runtime definition will start. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The processing to obtain the component runtime definition will start.
(S): Resumes processing.

KEOS50155-I

Processing to acquire the component runtime definition will now end. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The processing to obtain the component runtime definition will end.
(S): Resumes processing.

KEOS50156-W

The validity check of the statuses of the component [aa....aa] and related components could not be executed because an attempt to acquire these statuses failed.

aa....aa: Component name

Description: A combined check of the statuses could not be performed.
(S): Resumes processing.

KEOS50157-W

The user-defined reception status cannot be used with the status of the business process. (HCSC-Server name = [aa....aa], business process = [bb....bb], user-defined reception = [cc....cc])

aa....aa: HCSC server name

bb....bb: Service ID of the business process

cc....cc: Reception ID of the user-defined reception

Description: The combination of statuses is invalid.
(S): Resumes processing.
(O): Start the business process, or terminate the user-defined reception.

KEOS50158-E

The component has not been deployed. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Component name

Description: The component has not been allocated.
(S): Resumes processing.

KEOS50159-W

An attempt to stop the logical server failed during HCSC-Server unsetup. (logical server name = aa....aa)

aa....aa: Logical server name

Description: An attempt to stop the logical server failed during the cancellation of HCSC-Server setup.
(S): Resumes processing.
(O): Terminate the logical server.

KEOS50160-I

The logical server will now start. (HCSC-Server name = aa....aa, logical server name = bb....bb)

aa....aa: HCSC server name

bb....bb: Logical server name

Description: The logical server will start.
(S): Resumes processing.

KEOS50161-I

The logical server has started. (HCSC-Server name = aa....aa, logical server name = bb....bb)

aa....aa: HCSC server name

bb....bb: Logical server name

Description: The logical server has started.
(S): Resumes processing.

KEOS50162-I

The logical server will now stop. (HCSC-Server name = aa....aa, logical server name = bb....bb)

aa....aa: HCSC server name

bb....bb: Logical server name

Description: The logical server will stop.
(S): Resumes processing.

KEOS50163-I

The logical server has stopped. (HCSC-Server name = aa....aa, logical server name = bb....bb)

aa....aa: HCSC server name

bb....bb: Logical server name

Description: The logical server has stopped.
(S): Resumes processing.

KEOS50164-E

Synchronization failed. (details = aa....aa)

aa....aa: Detailed information

Description: A synchronous control failed.
(S): Resumes processing.
(O): Check the detailed message, and then re-execute the command.

KEOS50165-W

File deletion failed. (file name = aa....aa)

aa....aa: File name

Description: An attempt to delete the file failed.
(S): Resumes processing.
(O): Delete the file specified in this message, when all the commands and GUI of the HCSC-Manager are not active.

KEOS50166-E

The service information is invalid. (key name = aa....aa, value = bb....bb)

aa....aa: Key name

bb....bb: Value

Description: The service information for which processing was attempted is invalid.
(S): Terminates processing.
(O): Take appropriate action according to the detailed information, and then re-execute the processing. If the cause of the error is unclear, see the detailed information of the message log.

KEOS50167-E

The service information for the service adapter was not found. (cluster name = aa....aa, service adapter name = bb....bb)

aa....aa: Cluster name

bb....bb: Service ID of the service adapter

Description: No service information was found for the service adapter.
(S): Terminates processing.
(O): Either the service adapter displayed in the message does not exist in the repository, or is not imported. Import the service adapter, and then re-execute the processing.

KEOS50168-E

An attribute of the service information is invalid. (attribute = aa....aa)

aa....aa: Attribute

Description: An attempt to change the service information failed.
(S): Terminates processing.
(O): Execute the command to display the service information, and then check the attributes.

KEOS50169-E

The service type of the service information is invalid. (service type = aa....aa)

aa....aa: Service type

Description: An attempt to change the service information failed.
(S): Terminates processing.
(O): Execute the command to display the service information, and check the service type.

KEOS50170-E

The key of the service information is invalid. (key = aa....aa)

aa....aa: Key

Description: An attempt to change the service information failed.
(S): Terminates processing.
(O): Execute the command to display the service information, and check the key.

KEOS50171-E

The value of the service information is invalid. (value = aa....aa)

aa....aa: Value

Description: An attempt to change the service information failed.
(S): Terminates processing.
(O): See the manual for the values that can be specified.

KEOS50172-E

The service information cannot be changed because the service adapter has already been deployed. (cluster name = aa....aa, service adapter name = bb....bb)

aa....aa: Cluster name

bb....bb: Service ID of the service adapter

Description: An attempt to change the service information failed.
(S): Terminates processing.
(O): Delete the service adapter from all the HCSC servers of the cluster, and then re-execute the processing.

KEOS50173-E

An error occurred during a backup of the service information.

Description: An error occurred while the service information was being backed up.
(S): Terminates processing.
(O): Examine the cause of the error from the message log, and then take action. Then re-execute the command.

KEOS50174-E

An error occurred during deletion of the backup of the service information.

Description: An error occurred while a backup of the service information was being deleted.
(S): Terminates processing.
(O): Examine the cause of the error from the message log, and then take action. Then re-execute the command.

KEOS50175-I

The HCSC-Server will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The HCSC server will start.
(S): Resumes processing.

KEOS50176-I

The HCSC-Server has started. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The HCSC server has started.
(S): Resumes processing.

KEOS50177-I

The HCSC-Server will now stop. (HCSC-Server name = aa....aa, force option = bb....bb)

aa....aa: HCSC server name

bb....bb: Determining the forced termination option

true: Forced termination
false: Normal termination

Description: The HCSC server will stop.
(S): Resumes processing.

KEOS50178-I

The HCSC-Server has stopped. (HCSC-Server name = aa....aa, force option = bb....bb)

aa....aa: HCSC server name

bb....bb: Determining the forced termination option

true: Forced termination
false: Normal termination

Description: The HCSC server has stopped.
(S): Resumes processing.

KEOS50179-I

The standard reception for the HCSC-Server will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The standard reception will start.
(S): Resumes processing.

KEOS50180-I

The standard reception for the HCSC-Server has started. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The standard reception has started.
(S): Resumes processing.

KEOS50181-I

The standard reception for the HCSC-Server will now stop. (HCSC-Server name = aa....aa, stop type = bb....bb)

aa....aa: HCSC server name

bb....bb: Termination type

normal: Normal termination
wait: Planned termination
force: Forced termination

Description: The standard reception will stop.
(S): Resumes processing.

KEOS50182-I

The standard reception for the HCSC-Server has stopped. (HCSC-Server name = aa....aa, stop type = bb....bb)

aa....aa: HCSC server name

bb....bb: Termination type

normal: Normal termination
wait: Planned termination
force: Forced termination

Description: The standard reception has stopped.
(S): Resumes processing.

KEOS50183-I

The linkage reception for the HCSC-Server will now start. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The linkage reception will start.
(S): Resumes processing.

KEOS50184-I

The linkage reception for the HCSC-Server has started. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The linkage reception has started.
(S): Resumes processing.

KEOS50185-I

The linkage reception for the HCSC-Server will now stop. (HCSC-Server name = aa....aa, stop type = bb....bb)

aa....aa: HCSC server name

bb....bb: Termination type

normal: Normal termination
wait: Planned termination
force: Forced termination

Description: The linkage reception will stop.
(S): Resumes processing.

KEOS50186-I

The linkage reception for the HCSC-Server has stopped. (HCSC-Server name = aa....aa, stop type = bb....bb)

aa....aa: HCSC server name

bb....bb: Termination type

normal: Normal termination
wait: Planned termination
force: Forced termination

Description: The linkage reception has stopped.
(S): Resumes processing.

KEOS50187-I

The HCSC-Server will now link with the cluster. (HCSC-Server name = aa....aa, cluster name = bb....bb)

aa....aa: HCSC server name

bb....bb: Cluster name

Description: The linkage will start.
(S): Resumes processing.

KEOS50188-I

The HCSC-Server linked with the cluster. (HCSC-Server name = aa....aa, cluster name = bb....bb)

aa....aa: HCSC server name

bb....bb: Cluster name

Description: The linkage has started.
(S): Resumes processing.

KEOS50189-I

The linkage of the HCSC-Server and the cluster will now be disconnected. (HCSC-Server name = aa....aa, cluster name = bb....bb)

aa....aa: HCSC server name

bb....bb: Cluster name

Description: The linkage will stop.
(S): Resumes processing.

KEOS50190-I

The linkage of the HCSC-Server and the cluster has been disconnected. (HCSC-Server name = aa....aa, cluster name = bb....bb)

aa....aa: HCSC server name

bb....bb: Cluster name

Description: The linkage has stopped.
(S): Resumes processing.

KEOS50191-I

Communication with the HCSC-Server will be performed, and then the component will start. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The component will start.
(S): Resumes processing.

KEOS50192-I

The component has started. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The component has started.
(S): Resumes processing.

KEOS50193-I

Communication with the HCSC-Server will be performed, and then the component will stop. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The component will stop.
(S): Resumes processing.

KEOS50194-I

The component has stopped. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The component has stopped.
(S): Resumes processing.

KEOS50195-W

The deployment status of the business process does not match the status of the user-defined reception. (HCSC-Server name = aa....aa, business process = bb....bb, details = cc....cc)

aa....aa: HCSC server name

bb....bb: Service ID of the business process

cc....cc: Detailed information

Output in the 'Reception ID of the user-defined reception: Deployment status' format. The deployment status is as follows:

Deployment status: deployed

Deleted: deleted

Description: The allocation status of the business process does not match the status of the user-defined reception.
(S): Resumes processing.
(O): Deploy the business process, or delete the user-defined reception as needed.

KEOS50196-E

The service adapter is invalid. (cluster name = aa....aa, service adapter name = bb....bb, service type = cc....cc)

aa....aa: Cluster name

bb....bb: Service ID of the service adapter

cc....cc: Service type

Description: The service adapter is invalid.
(S): Terminates processing.
(O): Contact a customer engineer.

KEOS50197-I

The operation for the J2EE application will now start. (J2EE server name = aa....aa, application name = bb....bb, operation = cc....cc)

aa....aa: J2EE server name

bb....bb: Application name

If no applications are specified, '-' is output.

cc....cc: Operation name

start: Start the J2EE application
stop: Stop the J2EE application
delete: Delete the J2EE application
list: Display the J2EE application status

Description: The operations for the application will start.
(S): Resumes processing.

KEOS50198-I

The operation for the J2EE application has finished.

Description: The operations for the application are complete.
(S): Resumes processing.

KEOS50199-W

The start order cannot be acquired. (logical server name = aa....aa)

aa....aa: Logical server name

Description: The start order cannot be obtained.
(S): Resumes processing.
(O): Specify the start order as needed.

KEOS50200-I

The service information was read successfully.

Description: The service information was read successfully.
(S): Resumes processing.

KEOS50201-I

The service information will now be deleted.

Description: The service information will be deleted.
(S): Resumes processing.

KEOS50202-I

The service information was deleted successfully.

Description: The service information was deleted successfully.
(S): Resumes processing.

KEOS50203-I

The service adapter will now be changed.

Description: The service adapter will be changed.
(S): Resumes processing.

KEOS50204-I

The service adapter was changed successfully.

Description: The service adapter was changed successfully.
(S): Resumes processing.

KEOS50205-E

An error occurred during access to the service adapter.

Description: An error occurred while the service adapter was being accessed.
(S): Resumes processing.
(O): Contact a customer engineer.

KEOS50206-I

The service information will now be checked.

Description: The service information will be checked.
(S): Resumes processing.

KEOS50207-I

The service information was checked successfully.

Description: The service information was checked successfully.
(S): Resumes processing.

KEOS50208-I

The service information file will now be updated.

Description: The service information file will be updated.
(S): Resumes processing.

KEOS50209-I

The service information file was updated successfully.

Description: The service information file was updated successfully.
(S): Resumes processing.

KEOS50210-I

The service information file will now be accessed.

Description: The access to the service information will start.
(S): Resumes processing.

KEOS50211-I

The service information file was accessed successfully.

Description: The service information was accessed successfully.
(S): Resumes processing.

KEOS50212-E

An error occurred during writing of the service information. (details = aa....aa)

aa....aa: Detailed information

Description: An error occurred during the writing of the service information.
(S): Resumes processing.
(O): Reference the detailed information, eliminate the cause, and then re-execute the processing. If, however, this problem occurred while importing the repository, return the repository to the state prior to execution of the command, and then take appropriate action.

KEOS50213-I

The service information will now be read.

Description: The reading of the service information will start.
(S): Resumes processing.

KEOS50214-E

The service information cannot be changed because the service adapter is set to be invoked locally. (cluster name = aa....aa, service adapter name = bb....bb)

aa....aa: Cluster name

bb....bb: Service ID of the service adapter

Description: The service information cannot be changed because local invocation is specified as the invocation settings for the service adapter.
(S): Terminates processing.

KEOS50215-I

The command arguments.(aa....aa)

aa....aa: Details of command argument

Output in the format 'Command argument = command argument value,... '.

Description: The contents of the command argument will be displayed.
(S): Resumes processing.

KEOS50216-E

The logical server was not found. (server name = aa....aa)

aa....aa: Server name

Description: The logical server was not found.
(S): Terminates processing.
(O): Make sure that the logical server name specified with the -logical option, or the logical server name defined in the HCSC-Manager definition cscmng.server.HCSC-server-name.system is registered in the Management Server.

KEOS50217-E

The J2EE server was not found. (server name = aa....aa)

aa....aa: Server name

Description: The J2EE server was not found.
(S): Terminates processing.
(O): Check the J2EE server name specified with the -j2ee option.

KEOS50218-E

The setting for invoking the service adapter cannot be changed to [Remote invoke]. (cluster name = aa....aa, service adapter name = bb....bb, attribute name = cc....cc, attribute value = dd....dd)

aa....aa: Cluster name

bb....bb: Service adapter name

cc....cc: Attribute name

dd....dd: Attribute value

Description

The conditions for remote invocation are not satisfied.

(S)

Terminates processing.

(O)

The action to be taken differs depending on the option specified in the cscsvcctl command.

When the -setfile option is specified

Check the value of the following attribute names of the service information change definition file:

max_message_num
qos_in_order
rdarea_name

When the -props option is specified

Check the value of the following key names:

MaxMessageNum
QosInOrder
RdAreaName

KEOS50219-E

The connection failed. (J2EEServer name = aa....aa, url = bb....bb, details = cc....cc)

aa....aa: J2EE server name at the connection destination

bb....bb: URL at the connection destination

cc....cc: Details

Description: An attempt to connect to a J2EE server failed.
(S): Terminates processing.
(O): Make sure that the IP address (host name) and port number displayed in the message URL are correct. The port number is the port number of the RMI registry used by the J2EE server.

KEOS50220-E

The format of the URL is invalid. (J2EEServer name = aa....aa, URL= bb....bb, details = cc....cc)

aa....aa: J2EE server name

bb....bb: URL

cc....cc: Details

Description: The format of JMXServiceURL is invalid.
(S): Terminates processing.
(O): Contact a customer engineer.

KEOS50221-E

The object was not found. (J2EEServer name = aa....aa, object name = bb....bb, details = cc....cc)

aa....aa: J2EE server name

bb....bb: Object name

cc....cc: Details

Description: The object was not found.
(S): Terminates processing.
(O): Check the HCSC server environment.

KEOS50222-E

An exception occurred during the operation. (J2EEServer name = aa....aa, object name = bb....bb, operation = cc....cc, details = dd....dd)

aa....aa: J2EE server name

bb....bb: Object name

cc....cc: Operation

dd....dd: Details

Description: An error occurred during the operation.
(S): Terminates processing.
(O): Eliminate the cause of the error based on the detailed information, and then re-execute the processing. If the message ID included in the detail message is at a warning level, the processing might have been completed. If the problem is not resolved by viewing the detailed message, reference the message log of the J2EE server, and then resolve the problem.

KEOS50223-E

A communication error occurred. (J2EEServer name = aa....aa, details = bb....bb)

aa....aa: J2EE server name

bb....bb: Details

Description: A communication error occurred.
(S): Terminates processing.
(O): Check, and if necessary, revise the network environment, and then re-execute the processing.

KEOS50224-E

The remote version of the HCSC server is invalid. (local version = aa....aa, remote version = bb....bb)

aa....aa: Communication source version

bb....bb: Communication destination version

Description: The communication destination version is invalid.
(S): Terminates processing.
(O): You match versions of the communication source and the communication destination.

KEOS50225-E

The version of the backup file is invalid. (details = aa....aa)

aa....aa: Details

Description: The version of the backup file is invalid.
(S): Cancels processing.
(O): Check if the backup file is correct, and then re-execute the processing.

KEOS50226-E

The logical server status is invalid. (logical server name = aa....aa, expected status = bb....bb, current status = cc....cc)

aa....aa: J2EE server name

bb....bb: Expected status

cc....cc: Current status

One of the following values is displayed in the expected status and the current status:

inactive: Stopped
active: Running
abnormal ended: Abnormal termination
stopping: Stopping
starting: Starting
recovering: Recovering
communication error: Communication error
auto stopping: Auto-stopping
auto restarting: Auto-restarting
force stopping: Terminating forcibly
planned stopping: Terminating in a planned manner
unknown: Unknown

Description: The status of the logical server is invalid.
(S): Cancels processing.
(O): Match the current status of the logical server to the expected status, and then re-execute the command.

KEOS50227-I

Migration to the HCSC server has already been performed. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The migration has already been performed.
(S): Terminates processing.

KEOS50228-E

Tracking cannot be performed because the configuration is invalid. (HCSC-Server name = aa....aa, db-use = bb....bb, rm-use = cc....cc)

aa....aa: HCSC server name

bb....bb: Value of the setup db-use property

cc....cc: Value of the setup rm-use property

Description: The tracking cannot be performed because the configurations are different.
(S): Cancels processing.
(O): You cannot use this functionality in the current setup environment of the HCSC server. To use this functionality, reset the HCSC server.

KEOS50229-I

The home directory of HCSC-Manager is "aa....aa".

aa....aa: Home directory of HCSC-Manager

Description: The home directory of HCSC-Manager (root directory of the various directories used by HCSC-Manager) will be displayed.
(S): Resumes processing.

KEOS50230-E

The service information for the service adapter was not found. (cluster name = aa....aa, service adapter name = bb....bb, type = cc....cc)

aa....aa: Cluster name

bb....bb: Service ID of the service adapter

cc....cc: Type

WebService: Adapter for Web Services
SessionBean: Service adapter for SessionBean
MDB_WSR: Service adapter for MDB (WS-R)
MDB_DBQ: Service adapter for MDB (DB queue)

Description: The service information for the service adapter was not found.
(S): The processing will end.
(O): The service adapter displayed in the message does not exist in the repository or has not been imported. Import the service adapter, and then re-execute the command.

KEOS50231-E

The service adapter information is not the latest available. Import the repository, and then re-execute the command.

Description: The service adapter information is not the latest information.
(S): Terminates processing.
(O): Export the repository once using the cscrepctl command, re-import the same repository using the cscrepctl command, and then re-execute the command.

KEOS50232-W

An attempt to read a file has failed. (file = aa....aa, details = bb....bb)

aa....aa: Absolute path of the file that could not be read

bb....bb: Detailed information

Description

An attempt to read the file failed.

(S)

The processing continues.

(O)

Check the following details for the file displayed in the message:

Does the file exist?
Does the user have read permission for the file?
Is ISO8859-1 used as the encoding?

KEOS50233-E

The read value is invalid. (details = aa....aa)

aa....aa: Detailed information

Description: The read value is invalid.
(S): Stops the processing.
(O): Reference the details, remove the cause of the error, and then re-execute the command.

KEOS50234-E

The command cannot be executed because the installed versions do not match. (HCSC Manager = aa....aa, HCSC Server = bb....bb)

aa....aa: Version installed in the operating environment

bb....bb: Version installed in the execution environment

Description: The installed versions do not match.
(S): Stops the processing.
(O): Match the versions installed in the operating and execution environments, and then re-execute the command.

KEOS50235-E

A connection was refused. (Cosminexus Manager name = aa....aa, host = bb....bb, port = cc....cc, details = dd....dd)

aa....aa: Manager name at connection destination

bb....bb: Host name or IP address of connection destination

cc....cc: Port number of connection destination

dd....dd: Detailed information

Description: A connection was refused.
(S): The processing will be interrupted.
(O): Reference the details, remove the cause of the error, and then re-execute the command.

KEOS50236-W

Failed in loading a part of definition file.

Description: An attempt to load a part of the definition file failed.
(S): Processing continues.
(O): See the KEOS52316-W message that has been output to the message log.

KEOS50237-I

Verification of the repository to be imported will now be started.

Description: The Validation of the import operation will start.
(S): Processing continues.

KEOS50238-I

Verification of the repository to be imported has ended successfully.

Description: The Validation of the import operation ended.
(S): Processing continues.

KEOS50239-E

Verification of the repository to be imported has ended with errors.

Description

An error occurred during the validation of the import operation.

The specified repository cannot be imported.

(S)

Processing is interrupted.

(O)

See the message displayed just before this message, and eliminate the cause of the error.

KEOS50240-E

The specified component is private or does not exist. (component name = aa....aa)

aa....aa: Service ID or reception ID

Description: The specified component does not exist, or is a private component.
(S): Processing is interrupted.
(O): Check the component name.

KEOS50241-E

The component "aa....aa" cannot be imported. (component type = bb....bb)

aa....aa: Service ID

bb....bb: Component type

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

Description: The target component cannot be imported.
(S): Processing is interrupted.
(O): See the message displayed just before this message, and eliminate the cause of the error.

KEOS50242-E

The service ID or the reception ID already exists. (component name = aa....aa, component type = bb....bb)

aa....aa: Service ID or Reception ID

bb....bb: Component type

bp: Business process
urcptn: User-defined reception
adapter: Service adapter

Description

The service ID or reception ID is duplicated.

(S)

Processing is interrupted.

(O)

Execute one of the following operations:

Delete the imported component from the repository by using the cscrepctl -delete command.
Change the service ID or reception ID of the component to be imported.

KEOS50243-E

The service name already exists. (component name = aa....aa, service name = bb....bb, component type = cc....cc)

aa....aa: Service ID or Reception ID

bb....bb: Service name

cc....cc: Component type

bp: Business process
urcptn: User-defined reception
adapter: Service adapter

Description

The service name is duplicated.

(S)

Processing is interrupted.

(O)

Execute one of the following operations:

Delete the imported component from the repository by using the cscrepctl -delete command.
Change the service name of the component to be imported.

KEOS50244-E

The context root already exists. (component name = aa....aa, context root = bb....bb)

aa....aa: Reception ID

bb....bb: Context root

Description

The context root is duplicated.

(S)

Processing is interrupted.

(O)

Execute one of the following operations:

Delete the imported component from the repository by using the cscrepctl -delete command.
Change the context root of the component to be imported.

KEOS50245-E

The component has been deployed. (component name = aa....aa, component type = bb....bb)

aa....aa: Service ID or Reception ID

bb....bb: Component type

bp: Business process
urcptn: User-defined reception
adapter: Service adapter

Description: The component has been deployed.
(S): Processing is interrupted.
(O): Delete the component from the runtime environment by using the csccompoundeploy command.

KEOS50246-E

A component with a different component type or adapter type exists.(component name = aa....aa, service name = bb....bb, component type = cc....cc, adapter type = dd....dd)

aa....aa: Service ID or Reception ID

bb....bb: Service name

cc....cc: Component type

bp: Business process
urcptn: User-defined reception
adapter: Service adapter

dd....dd: Adapter type

WebService: Adapter for Web Services
SessionBean: Service adapter for SessionBeans
MDB_WSR: Service adapter for MDB (WS-R)
MDB_DBQ: Service adapter for MDB (DB Queue)
Custom: Custom adapter ^#

Note#

Adapters other than the Web Service adapter, SessionBean service adapter, MDB (WS-R) service adapter, and MDB (DB Queue) service adapter
-: For adapters other than the service adapter

Description

A component where the service ID or reception ID matches with the service name, and the component type or adapter type differs, was found.

(S)

Processing is interrupted.

(O)

Execute one of the following operations:

Delete the imported component from the repository by using the cscrepctl -delete command.
Change the service ID or reception ID and service name of the component to be imported.

KEOS50247-E

The reception ID and the context root already exist. (component name = aa....aa, context root = bb....bb)

aa....aa: Reception ID

bb....bb: Context root

Description

The reception ID and context root are duplicated.

(S)

Processing is interrupted.

(O)

Execute one of the following operations:

Use the cscrepls command to check the component that has a duplicated reception ID or context root. After that, delete the imported component from the repository by using the cscrepctl -delete command.
Change the reception ID and context root of the component to be imported.

KEOS50250-E

The command cannot be executed because you do not have administrator privileges.

Description: The command cannot be executed because the user does not have administrator privileges.
(S): Processing ends.
(O): Re-execute the command on a command prompt executed as an administrator.

KEOS50251-E

An error occurred while the permissions were being checked.

Description

An error occurred while the permissions were being checked.

(S)

Processing ends.

(O)

The memory might be insufficient. Increase the available space, and then re-execute the processing.

If the problem is not resolved, contact maintenance personnel.

KEOS50252-E

The operation cannot be performed, because this function cannot communicate with the HCSC server. (Cosminexus Manager name = aa....aa)

aa....aa: Distinguished name of manager at destination

Description: There is no compatibility in communication with the HCSC server.
(S): Processing ends.
(O): Check the version of the HCSC server at the destination. After that, upgrade the version of the HCSC server.

KEOS50254-E

An attempt to read a file has failed. (file = aa....aa, details = bb....bb)

aa....aa: Absolute path of the file that could not be read

bb....bb: Details

Description

An attempt to read the file failed.

(S)

Processing ends.

(O)

Check the following information for the file displayed in the message:

The file exists.
The user has the permission to read the file.

KEOS50255-I

The repository will now be updated.

Description: The update of the repository will start.
(S): Processing continues.

KEOS50256-I

The repository was updated successfully.

Description: The repository was updated successfully.
(S): Processing continues.

KEOS50257-E

An error occurred while updating the repository.

Description: An error occurred while the repository was being updated.
(S): Processing ends.
(O): See the message displayed just before this message, and eliminate the cause of the error.

KEOS50258-E

An error occurred during repository migration.

Description: An error occurred during a repository migration.
(S): Processing ends.
(O): See the message displayed just before this message, and eliminate the cause of the error.

KEOS50259-I

The definition files were cached successfully. (HCSC-Server name = aa....aa, component name = bb....bb)

aa....aa: HCSC server name

bb....bb: Service ID

Description: The caching of the definition files is complete.
(S): Processing continues.

KEOS50260-W

The specified service adapter or business process has been deployed. (component name = aa....aa)

aa....aa: Component name

Description: The specified service adapter or business process has already been allocated.
(S): Processing continues.

KEOS50261-E

Deployment of a service adapter or business process failed. (component name = aa....aa, location information exists = bb....bb, application exists = cc....cc)

aa....aa: Component name

bb....bb: Presence or absence of location information

found: Location information is present
not found: Location information is absent

cc....cc: Presence or absence of applications

found: Application is already allocated
not found: Application is not allocated

Description: An attempt to allocate a service adapter or business process failed because the location information and applications do not match.
(S): Processing is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KEOS50262-W

The specified user-defined reception has been deployed. (reception ID = aa....aa)

aa....aa: Reception ID

Description: The specified user-defined reception has already been allocated.
(S): Processing continues.

KEOS50263-E

Deployment of the user-defined reception failed. (reception ID = aa....aa, location information exists = bb....bb, application exists = cc....cc)

aa....aa: Reception ID

bb....bb: Presence or absence of location information

found: Location information is present
not found: Location information is absent

cc....cc: Presence or absence of applications

found: Application is already allocated
not found: Application is not allocated

Description: An attempt to allocate a user-defined reception failed because the location information and applications do not match.
(S): Processing is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KEOS50264-W

Some components could not be deployed. (number of components not deployed = aa....aa)

aa....aa: Number of HCSC components that could not be deployed

Description: When the csccompodeploy command with the -errskip option specified was executed, some HCSC components could not be deployed.
(S): Processing continues.
(O): Check the log and trace information, and then eliminate the cause of the error.

KEOS50265-W

Some components could not be started. (number of components not started = aa....aa)

aa....aa: Number of HCSC components that could not start

Description: When the csccompostart command with the -errskip option specified was executed, some HCSC components could not start.
(S): Processing continues.
(O): Check the log and trace information, and then eliminate the cause of the error.

KEOS50268-E

The reception name already exists. (reception ID = aa....aa, reception name = bb....bb)

aa....aa: Reception ID

bb....bb: Reception name

Description

The specified reception name already exists.

(S)

Processing is interrupted.

(O)

Take one of the following actions:

Delete the imported HCSC component from the repository by using the cscrepctl -delete command.
Change the reception name of the HCSC component to be imported.

KEOS50269-E

A component with a different reception type exists. (reception ID = aa....aa, reception name = bb....bb, reception type = cc....cc, reception detail = dd....dd)

aa....aa: Reception ID

bb....bb: Reception name

cc....cc: Reception type

dd....dd: Reception type details

Description

There is another HCSC component having the same reception name as the reception ID but a different reception type.

(S)

Processing is interrupted.

(O)

Take one of the following actions:

Delete the imported HCSC component from the repository by using the cscrepctl -delete command.
Change the reception ID and reception name of the HCSC component to be imported.

KEOS50999-E

An unexpected exception occurred. (details = aa....aa)

aa....aa: Detailed information

Description: An unexpected error occurred.
(S): Terminates processing.
(O): Contact a customer engineer.

KEOS52000-I

Usage:

cscpasswd [-h] -user <User Id> -pass <Password>

{

-print

| -cscmnguser <Change User Id> -cscmngpass <Change Password>

| -mng <Cosminexus Manager Name> -mnguser <Change User Id>

[-mngpass <Change Password>]

| -csc <HCSC-Server Name> -cscuser <Change User Id>

-cscpass <Change Password>

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscpasswd command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52001-I

Usage:

cscsvsetup [-h] -user <User Id> -pass <Password>

[-csc <Setup HCSC-Server Name>] [-cluster <Cluster Name>]

-propfile <Setup File Path>

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvsetup command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52002-I

Usage:

cscsvunsetup [-h] -user <User Id> -pass <Password>

-csc <Unsetup HCSC-Server Name> [-ignore]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvunsetup command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52003-I

Usage:

csccompodeploy [-h] -user <User Id> -pass <Password>

{

-csc <HCSC-Server Name> | -cluster <Cluster Name> }

{

-name <ServiceID> | -all [-errskip] | -namelist <Text File Name> [-errskip] }

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the csccompodeploy command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52004-I

Usage:

csccompoundeploy [-h] -user <User Id> -pass <Password>

{

-csc <HCSC-Server Name> { -name <ServiceID> | -all }

| -cluster <Cluster Name> { -name <ServiceID> | -all }

}

[-force] [-ignore]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the csccompoundeploy command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52007-I

Usage:

cscsvconfig [-h] -user <User Id> -pass <Password>

{

-operation get -csc <HCSC-Server Name>

| -operation set -propfile <Property File Path>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvconfig command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52008-I

Usage:

cscrepctl [-h] -user <User Id> -pass <Password>

{

-import <Import File Name> [-overwrite] [{ -check |

-compo [{-name <ServiceID> or UserDefinedReception(selectable) <ReceptionID> | -namelist <Text File Name>}]

[-nouoc] }] | -export <Zip File Name> | -autoexport |

-delete {-name <ServiceID> or UserDefinedReception(selectable) <ReceptionID> | -namelist <Text File Name>}}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscrepctl command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52009-I

Usage:

cscrepls [-h] -user <User Id> -pass <Password>

{ [-repfile <Export Zip File Name>] |

[-envbackfile <HCSC-Manager Backup Zip File Name>] }

[ { -csc <HCSC-Server Name> | -oldtype } ]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscrepls command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52010-I

Usage:

cscsvstart [-h] -user <User Id> -pass <Password>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

[ { -logical <Logical Server Name> | -system } ]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvstart command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52011-I

Usage:

cscpiselect [-h] -user <UserID> -pass <Password>

-csc <HCSC-Server Name>

-table {

| boolean | message | relation | process_set

}

[-detail] [-separator { comma | tab }]

[{ -count | -orderby <Sort Condition> }]

[{

-where <Where Condition>

| -wherefile <Where Group File Path>

| [-processname <Business Process Definition Name>]

[-date [<StartTime>],<EndTime>]

[-status { executing | completed | faulted | error | all } ]

}]

[-encoding <Encoding Name>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscpiselect command.
(S): The processing will end.
(O): Check the message for the command usage.

KEOS52012-I

Usage:

cscpidelete [-h] -user <UserID> -pass <Password>

-csc <HCSC-Server Name>

{

-where <Where Condition>

| -idlist <ID List File Path>

| -wherefile <Where Group File Path>

| -force

| [-processname <Business Process Definition Name>]

[-date [<StartTime>],<EndTime>]

[-status { executing | completed | faulted | error | all } ]

}

[-encoding <Encoding Name>]

--

Version aa....aa(bb....bb)

aa....aa: Cosminexus version

bb....bb: Cosminexus product name

Description: This message describes the usage of the cscpidelete command.
(S): The processing will end.
(O): Check the message for the command usage.

KEOS52013-I

Usage:

cscpireexec [-h] -user <User Id> -pass <Password>

[-csc <HCSC-Server Name>]

{

-processname <Business Process Definition Name> |

-processnamefile <Business Process Definition File Path>

}

[ { -processid <ProcessId Name> |

-processidfile <ProcessId File Path> } ]

[-encoding <Encoding Name>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscpireexec command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52014-I

cscrepls will now start.

Description: The cscrepls command will start.
(S): Resumes processing.

KEOS52015-I

cscrepls ended normally.

Description: The cscrepls command ended normally.
(S): Terminates processing.

KEOS52016-E

An argument is invalid. (argument = aa....aa)

aa....aa: Invalid argument

Description: An argument is invalid.
(S): Terminates processing.
(O): Check the command format.

KEOS52017-I

cscsvconfig will now start.

Description: The cscsvconfig command will start.
(S): Resumes processing.

KEOS52018-I

cscsvconfig ended normally.

Description: The cscsvconfig command ended normally.
(S): Terminates processing.

KEOS52019-I

cscpiselect will now start.

Description: The cscpiselect command will start.
(S): Resumes processing.

KEOS52020-I

cscpiselect ended normally.

Description: The cscpiselect command ended normally.
(S): Terminates processing.

KEOS52021-E

cscpiselect ended abnormally.

Description: The cscpiselect command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52022-I

cscpidelete will now start.

Description: The cscpidelete command will start.
(S): Resumes processing.

KEOS52023-I

cscpidelete ended normally.

Description: The cscpidelete command ended normally.
(S): Terminates processing.

KEOS52024-E

cscpidelete ended abnormally.

Description: The cscpidelete command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52025-E

cscrepls ended abnormally.

Description: The cscrepls command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52026-E

cscsvconfig ended abnormally.

Description: The cscsvconfig command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52027-E

An unexpected error occurred. (details = aa....aa)

aa....aa: Detailed exception message

Description: An unexpected exception occurred.
(S): Terminates processing.
(O): Contact a customer engineer.

KEOS52028-E

The combination of arguments is invalid.

Description: The combination of arguments is invalid.
(S): Terminates processing.
(O): Check the command format.

KEOS52029-I

The row count is aa....aa.

aa....aa: Number of rows received from MBean

Description: This message displays the execution result for the cscpiselect command with the -count option specified.
(S): Terminates processing.

KEOS52030-I

Analysis of command arguments will now start.

Description: The command arguments will be parsed.
(S): Resumes processing.

KEOS52031-I

Analysis of command arguments is complete.

Description: The parsing of the command arguments is complete.
(S): Resumes processing.

KEOS52032-I

The user information will now be updated.

Description: The user information will be updated.
(S): Resumes processing.

KEOS52033-W

Unsetup of HCSC-Server has already been performed. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The setup of the HCSC server has already been removed.
(S): Terminates processing.
(O): Check the argument value and re-execute the processing.

KEOS52034-E

The specified HCSC-Server name, cluster name, or Cosminexus Manager name already exists. (specified HCSC-Server type or cluster type or Cosminexus Manager type= aa....aa, specified name = bb....bb, duplicated type = cc....cc, duplicated name = dd....dd)

aa....aa: type

HCSC-Server: HCSC server name
cluster: Cluster name
Cosminexus Manager: Manager name

bb....bb: Specified name

cc....cc: Duplicated type

HCSC-Server: HCSC server name
cluster: Cluster name
Cosminexus Manager: Manager name

dd....dd: Duplicated name

Description: The specified HCSC server name, cluster name, or distinguished name of the manager are duplicated.
(S): Terminates processing.
(O): Specify a unique value, and then re-execute the setup.

KEOS52035-E

The specified file path is too long. (bytes in specified file path = aa....aa, maximum bytes = bb....bb, file path = cc....cc)

aa....aa: Number of bytes of the specified file

bb....bb: Maximum number of bytes

cc....cc: File path

Description: The specified file path is too long.
(S): Terminates processing.
(O): Correct the file path so that it does not exceed the maximum length in bytes, and then re-execute the processing.

KEOS52036-I

cscsvstart will now start.

Description: The cscsvstart command will start.
(S): Resumes processing.

KEOS52037-I

cscsvstart ended normally.

Description: The cscsvstart command ended normally.
(S): Resumes processing.

KEOS52038-E

cscsvstart ended abnormally.

Description: The cscsvstart command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52039-I

Usage:

cscsvstop [-h] -user <User Id> -pass <Password>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

[ { -logical <Logical Server Name> | -system } ]

[-force]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvstop command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52040-I

Communication with the HCSC-Server, to re-execute a process instance, will now start.

Description: A communication will be performed to re-execute a process instance.
(S): Resumes processing.

KEOS52041-I

Communication with the HCSC-Server, to re-execute a process instance, is complete.

Description: The communication for re-executing a process instance is complete.
(S): Resumes processing.

KEOS52042-E

The maximum number of HCSC-Servers connected to each cluster has been exceeded. (cluster type = aa....aa, cluster name = bb....bb)

aa....aa: Cluster type

HA: HA cluster
LB: Load balancing cluster

bb....bb: Cluster name

Description: The upper limit for the HCSC servers that can be set in one cluster has been exceeded.
(S): Terminates processing.
(O): An HA cluster supports a maximum of 2 HCSC servers and a load-balancing cluster supports a maximum of 1,024 HCSC servers. Rename the cluster, and then re-execute the setup.

KEOS52043-I

cscsvstop will now start.

Description: The cscsvstop command will start.
(S): Resumes processing.

KEOS52044-E

A memory shortage occurred.

Description: A memory shortage occurred.
(S): Cancels processing.
(O): Increase the memory size for JavaVM, and then re-execute the processing.

KEOS52045-I

cscsvstop ended normally.

Description: The cscsvstop command ended normally.
(S): Resumes processing.

KEOS52046-E

An error was detected during checking of the properties file. At least one of the specified keys should be set to ON. (file name = aa....aa, keys = bb....bb)

aa....aa: Property file name

bb....bb: String in which keys, with at least one key set up to ON, are delimited using ',' (comma)

Description: An error occurred during the validation of the property file. At least one of the specified keys must be set to ON.
(S): Terminates processing.
(O): Re-execute processing.

KEOS52047-E

cscsvstop ended abnormally.

Description: The cscsvstop command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52048-I

Usage:

cscrcptnstart [-h] -user <User Id> -pass <Password>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

[ { -standard | -userdef } ]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscrcptnstart command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52049-I

Communication with the HCSC-Server, to search for process instances, will now start.

Description: A communication will be performed to search for a process instance.
(S): Resumes processing.

KEOS52050-I

Communication with the HCSC-Server, to search for process instances, is complete.

Description: The communication performed to search for a process instance is complete.
(S): Resumes processing.

KEOS52051-I

Communication with the HCSC-Server, to delete a process instance, will now start.

Description: A communication will be performed to delete a process instance.
(S): Resumes processing.

KEOS52052-I

Communication with the HCSC-Server, to delete a process instance, is complete.

Description: The communication performed to delete a process instance is complete.
(S): Resumes processing.

KEOS52053-E

An error was detected during checking of the combination of the properties file and XML file. (properties file name = aa....aa, key = bb....bb, value = cc....cc. But XML = dd....dd, tag = ee....ee, type = ff....ff)

aa....aa: Property file name

bb....bb: Property key with error

cc....cc: Set up value

dd....dd: XML file name

ee....ee: Tag name

Specified in the XPath format.

ff....ff: Tag type

EXIST: Tag exists
NON EXIST: Tag does not exist

Description: An error occurred while the combination of the property file and XML file was being checked.
(S): Terminates processing.
(O): The combination of XML file and property file must be correct. Check, and if necessary, revise the combination of XML file and property file, and then re-execute the command.

KEOS52054-I

The deleted row count is aa....aa.

aa....aa: Number of deleted rows

Description: The number of rows displayed in the message are deleted.
(S): Terminates processing.

KEOS52055-I

cscutil will now start.

Description: The cscutil command will start.
(S): Resumes processing.

KEOS52056-I

cscutil ended normally.

Description: The cscutil command ended normally.
(S): Terminates processing.

KEOS52057-I

cscrcptnstart will now start.

Description: The cscrcptnstart command will start.
(S): Resumes processing.

KEOS52058-I

cscrcptnstart ended normally.

Description: The cscrcptnstart command ended normally.
(S): Resumes processing.

KEOS52059-E

An error occurred during reading of a file. (encoding = aa....aa, file = bb....bb, details = cc....cc)

aa....aa: Specified encoding name

bb....bb: Name of the file with error

cc....cc: Detailed error message

Description: An error occurred while a file was being read.
(S): Terminates processing.
(O): Check the specified encoding name, and then re-execute the processing.

KEOS52060-E

An error occurred during reading of a file. (file name = aa....aa, details = bb....bb)

aa....aa: Name of the file with error

bb....bb: Detailed error message

Description: An error occurred while a file was being read.
(S): Terminates processing.
(O): Check the cause of the error, take an appropriate action, and then re-execute the processing.

KEOS52061-E

cscrcptnstart ended abnormally.

Description: The cscrcptnstart command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52062-E

An empty file is specified. (file name = aa....aa)

aa....aa: Name of the empty file

Description: An empty file is specified.
(S): Terminates processing.
(O): Check the specified file, and then re-execute the operation.

KEOS52063-E

A specified file cannot be accessed. (file name = aa....aa)

aa....aa: Name of the file that could not be accessed

Description: The specified file cannot be accessed due to some reason.
(S): Terminates processing.
(O): Check the specified file, and then re-execute the operation.

KEOS52064-E

cscutil ended abnormally.

Description: The cscutil command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52065-I

Usage:

cscutil [-h] -user <User Id> -pass <Password>

{-mng <manager name> |

-host <host>:<port> -mnguser <manager id> [-mngpass <manager passwd>]}

[-target <target name>] [-operation <operation name>]

[{-props <property> | -propfile <property file>}]

[-binary <binary file>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscutil command.
(S): Resumes processing.

KEOS52066-I

Checking of the command arguments will now start.

Description: The checking of the command arguments will start.
(S): Resumes processing.

KEOS52067-I

Checking of the command arguments ended normally.

Description: The checking of the command arguments ended normally.
(S): Resumes processing.

KEOS52068-I

Authentication for HCSC-Manager will now start.

Description: The authentication for HCSC-Manager will start.
(S): Resumes processing.

KEOS52069-I

Authentication for HCSC-Manager ended normally.

Description: The authentication for HCSC-Manager ended normally.
(S): Resumes processing.

KEOS52070-I

Now connecting to "aa....aa" ...

aa....aa: Manager name

Description: The process of connecting to the remote management function of Management Server will start.
(S): Resumes processing.

KEOS52071-I

Connection to the remote management function was established successfully.

Description: The connection to the remote management function of Management Server was established successfully.
(S): Resumes processing.

KEOS52072-I

Operation is started. (target = aa....aa, operation = bb....bb)

aa....aa: Object name

bb....bb: Operation

Description: The operation will start.
(S): Resumes processing.

KEOS52073-I

Operation was finished normally.

Description: The operation ended normally.
(S): Resumes processing.

KEOS52074-W

A file with the same name cannot be deleted when writing re-execution results to a file. (file = aa....aa, data = bb....bb)

aa....aa: File name

bb....bb: Data to be output

Description: A file with the same name cannot be deleted during the file output of the re-execution results.
(S): Resumes processing.
(O): Investigate why the file cannot be deleted.

KEOS52075-W

An attempt to write re-execution results to a file has failed. (details = aa....aa, file = bb....bb, data = cc....cc)

aa....aa: Error details

bb....bb: File name

cc....cc: Data to be output

Description: An attempt to output the re-execution results to a file has failed.
(S): Resumes processing.
(O): Check the detail message to determine the cause of the file write error.

KEOS52076-I

cscpireexec will now start.

Description: The cscpireexec command will start.
(S): Resumes processing.

KEOS52077-I

cscpireexec ended normally.

Description: The cscpireexec command ended normally.
(S): Terminates processing.

KEOS52078-E

cscpireexec ended abnormally.

Description: The cscpireexec command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52079-I

cscpasswd will now start.

Description: The cscpasswd command will start.
(S): Resumes processing.

KEOS52080-I

cscpasswd ended normally.

Description: The cscpasswd command ended normally.
(S): Terminates processing.

KEOS52081-E

cscpasswd ended abnormally.

Description: The cscpasswd command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52082-I

cscrepctl will now start.

Description: The cscrepctl command will start.
(S): Resumes processing.

KEOS52083-I

cscrepctl ended normally.

Description: The cscrepctl command ended normally.
(S): Terminates processing.

KEOS52084-E

cscrepctl ended abnormally.

Description: The cscrepctl command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52085-I

cscsvsetup will now start.

Description: The cscsvsetup command will start.
(S): Resumes processing.

KEOS52086-I

cscsvsetup ended normally.

Description: The cscsvsetup command ended normally.
(S): Terminates processing.

KEOS52087-E

cscsvsetup ended abnormally.

Description: The cscsvsetup command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52088-I

cscsvunsetup will now start.

Description: The cscsvunsetup command will start.
(S): Resumes processing.

KEOS52089-I

cscsvunsetup ended normally.

Description: The cscsvunsetup command ended normally.
(S): Terminates processing.

KEOS52090-E

cscsvunsetup ended abnormally.

Description: The cscsvunsetup command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52097-I

csccompodeploy will now start.

Description: The csccompodeploy command will start.
(S): Resumes processing.

KEOS52098-I

csccompodeploy ended normally.

Description: The csccompodeploy command ended normally.
(S): Terminates processing.

KEOS52099-E

csccompodeploy ended abnormally.

Description: The csccompodeploy command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52100-I

csccompoundeploy will now start.

Description: The csccompoundeploy command will start.
(S): Resumes processing.

KEOS52101-I

csccompoundeploy ended normally.

Description: The csccompoundeploy command ended normally.
(S): Terminates processing.

KEOS52102-E

csccompoundeploy ended abnormally.

Description: The csccompoundeploy command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52103-W

There is a conflict with information that has already been set. The set information will be ignored. (key = aa....aa, value = bb....bb, already set value = cc....cc)

aa....aa: XPath of the element defined in the configuration definition file

bb....bb: Specified value

cc....cc: Already set up value

Description: The specified information differs from the information that has already been set. The set information will be ignored.
(S): Resumes processing.
(O): To change the information that has already been set, perform unsetup.

KEOS52104-E

The request type that is already set up is not set to ON. (type = aa....aa)

aa....aa: Request type

request-ejb: EJB invocation
request-jms: JMS invocation
request-soap: SOAP invocation
request-dbq: DBQ invocation

Description: The already set up request type is not set to ON.
(S): Terminates processing.
(O): Set the existing request type setting to ON and then re-execute the setup.

KEOS52105-E

Cosminexus Manager does not exist, even though HCSC-Server is in the repository. (HCSC-Server name = aa....aa, Cosminexus Manager name = bb....bb)

aa....aa: HCSC server name

bb....bb: Manager name

Description

Manager does not exist, even though the HCSC server exists in the repository.

(S)

Terminates processing.

(O)

Regarding the specified Manager name and HCSC server name, check the following:

Whether or not the specified HCSC server and Manager exist.
Whether or not there is an HCSC server on the specified Manager.

KEOS52106-E

The cluster does not exist, even though HCSC-Server is in the repository. (HCSC-Server name = aa....aa, cluster name = bb....bb)

aa....aa: HCSC server name

bb....bb: Cluster name

Description

The cluster does not exist, even though the HCSC server exists in the repository.

(S)

Terminates processing.

(O)

Regarding the specified cluster name and HCSC server name, check the following:

Whether or not the specified HCSC server and cluster exist.
Whether or not there is a cluster on the specified Manager.

KEOS52107-E

An error occurred because it differed from the value to which the set value had already been set in properties. (file = aa....aa, key = bb....bb, value = cc....cc, already setup value = dd....dd)

aa....aa: Name of the file with error

bb....bb: XPath of the element defined in the configuration definition file or the key of the property file in which the error occurred

cc....cc: Specified value

dd....dd: Already set up value

Description: An error occurred because the specified value differs from the value that has already been set up.
(S): Terminates processing.
(O): Check the existing setting and then re-execute the setup.

KEOS52108-E

The new reception information differs from the already set up HCSC-Server reception information. (cluster name = aa....aa, current setup = bb....bb, new setup information = cc....cc)

aa....aa: Cluster name

bb....bb: Reception information that is already set up

Output in the format 'HCSC-server-name:Reception-information'.

cc....cc: Reception information specified during the setup

Output in the format 'Reception-information=ON or OFF'.

Description: The new reception information differs from the already set up HCSC server reception information.
(S): Terminates processing.
(O): Execute the HCSC server setup in such a way that the reception information matches.

KEOS52109-E

Please perform unsetup of the HCSC-Server that has fewer reception types. (cluster name = aa....aa, current setup = bb....bb)

aa....aa: Cluster name

bb....bb: Reception information that is already set up

Output in the format 'HCSC-server-name:Reception-information'.

Description: An attempt was made to remove the setup of an HCSC server with more reception types.
(S): Terminates processing.
(O): When you cancel HCSC server setup, start with the HCSC server that has the fewest reception types.

KEOS52110-I

Usage:

cscrcptnstop [-h] -user <User Id> -pass <Password>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

[ { -standard | -userdef } ]

[-stopfg { normal | wait | force } ]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscrcptnstop command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52111-I

cscrcptnstop will now start.

Description: The cscrcptnstop command will start.
(S): Resumes processing.

KEOS52112-I

cscrcptnstop ended normally.

Description: The cscrcptnstop command ended normally.
(S): Terminates processing.

KEOS52113-E

cscrcptnstop ended abnormally.

Description: The cscrcptnstop command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52114-I

Usage:

csccompostart [-h] -user <User Id> -pass <Password>

{ -csc <HCSC-Server Name> | -cluster <Cluster Name> }

{ -name <ServiceID> | -all [-errskip] | -namelist <Text File Name> [-errskip] }

[-nogc]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the csccompostart command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52115-I

csccompostart will now start.

Description: The csccompostart command will start.
(S): Resumes processing.

KEOS52116-I

csccompostart ended normally.

Description: The csccompostart command ended normally.
(S): Terminates processing.

KEOS52117-E

csccompostart ended abnormally.

Description: The csccompostart command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52118-I

Usage:

csccompostop [-h] -user <User Id> -pass <Password>

{

-csc <HCSC-Server Name> { -name <ServiceID> | -all }

| -cluster <Cluster Name> { -name <ServiceID> | -all }

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the csccompostop command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52119-I

csccompostop will now start.

Description: The csccompostop command will start.
(S): Resumes processing.

KEOS52120-I

csccompostop ended normally.

Description: The csccompostop command ended normally.
(S): Terminates processing.

KEOS52121-E

csccompostop ended abnormally.

Description: The csccompostop command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52122-I

cscenvbackup will now start.

Description: The cscenvbackup command will start.
(S): Resumes processing.

KEOS52123-I

cscenvbackup ended normally.

Description: The cscenvbackup command ended normally.
(S): Terminates processing.

KEOS52124-E

cscenvbackup ended abnormally.

Description: The cscenvbackup command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52125-I

cscenvrestore will now start.

Description: The cscenvrestore command will start.
(S): Resumes processing.

KEOS52126-I

cscenvrestore ended normally.

Description: The cscenvrestore command ended normally.
(S): Terminates processing.

KEOS52127-W

The component is already deleted. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Component type to be deployed

bp: Business process
adapter: Service adapter
urcptn: User-defined reception

cc....cc: Name of the component to be deployed

Description: The specified component is already deleted.
(S): Terminates processing.

KEOS52128-I

Usage:

cscrepdiff [-h] -user <User Id> -pass <Password>

-repfile <Zip File Name> [-allinfo]

[{ -check | -compo [-name <ServiceID> or UserDefinedReception(selectable) <ReceptionID>] }]

[-listfile <Text File Name>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscrepdiff command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52129-I

cscrepdiff will now start.

Description: The cscrepdiff command will start.
(S): Resumes processing.

KEOS52130-I

cscrepdiff ended normally.

Description: The cscrepdiff command ended normally.
(S): Terminates processing.

KEOS52131-E

cscrepdiff ended abnormally.

Description: The cscrepdiff command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52132-I

Usage:

cscstatus [-h] -user <User Id> -pass <Password>

[-csc <HCSC-Server Name> -type { reception | compo | system } ]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscstatus command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52133-I

cscstatus will now start.

Description: The cscstatus command will start.
(S): Resumes processing.

KEOS52134-I

cscstatus ended normally.

Description: The cscstatus command ended normally.
(S): Terminates processing.

KEOS52135-E

cscstatus ended abnormally.

Description: The cscstatus command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52136-E

An error occurred because the specified value is already set. (file in which error occurred = aa....aa, key = bb....bb, specified value = cc....cc, already set value = dd....dd)

aa....aa: Name of the file with error

bb....bb: XPath of the element defined in the configuration definition file or the key of the property file in which the error occurred

cc....cc: Specified value

dd....dd: Already set up value

Output in the format 'HCSC-server-name:value'.

Description: An error occurred because the specified value is the same as the value that has already been set up.
(S): Terminates processing.
(O): Check the existing setting and then re-execute the setup.

KEOS52137-E

cscenvrestore ended abnormally.

Description: The cscenvrestore command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52138-I

Usage:

cscenvbackup [-h] -user <User Id> -pass <Password>

[-backupdir <ZipFileOutputDirectory>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscenvbackup command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52139-I

Usage:

cscenvrestore [-h] -user <User Id> -pass <Password>

[-restorefile <BackupZipFileName>]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscenvrestore command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52140-E

An attempt to parse the HCSC-Server configuration definition file has failed. (file name = aa....aa, details = bb....bb)

aa....aa: HCSC server configuration definition file name

bb....bb: Error details

Description: An attempt to parse the HCSC server configuration definition file failed.
(S): Terminates processing.
(O): Check the message details. If **** is displayed as the detail message, check the KEOS52141-E message that has been output to the message log, and take appropriate action.

KEOS52141-E

A parsing error occurred. (type = aa....aa, details = bb....bb)

aa....aa: Type

warning: A warning occurred.
error: An error occurred.
fatalError: A fatal error occurred.

bb....bb: Error details

Description: This message provides the details for the parsing error.
(S): Resumes processing.
(O): Check the message details and take appropriate action.

KEOS52142-E

An error occurred while checking the values specified in the XML file. (tag name = aa....aa, value = bb....bb)

aa....aa: Tag name

bb....bb: Specified value

Description: An error occurred while the values specified in the XML file were being validated.
(S): Terminates processing.
(O): Check the specifications and the value specified in the tag, and then re-execute the processing.

KEOS52143-E

An error occurred while checking the properties file. (file name = aa....aa)

aa....aa: Property file name

Description: An error occurred while the property file was being validated.
(S): Terminates processing.
(O): Check the KEOS50026-E message that has been output to the message log and take appropriate action.

KEOS52144-E

An error occurred while checking the defined values in the properties file. (key name = aa....aa, value = bb....bb, error type = cc....cc)

aa....aa: Key name

bb....bb: Specified value

cc....cc: Error type

NO_KEY: A required property is not specified.
BAD_KEY: An invalid key has been specified.
INVALID_VALUE: The key value is invalid.

Description: An error occurred while the values defined in the property file were being validated.
(S): Terminates processing.
(O): Check the specifications, and then re-execute the processing.

KEOS52145-E

An error occurred while checking the HCSC-Server setup file. (file name = aa....aa)

aa....aa: Name of the file with error

Description: An error occurred while the HCSC server setup file was being validated.
(S): Terminates processing.
(O): Check the KEOS52142-E message in the message log and take appropriate action.

KEOS52146-I

Usage:

cscsvcctl [-h] -user <User Id> -pass <Password>

{

-getfile <Get File Path>

| -setfile<Set File Path>

| [-cluster <Cluster Name>] -name <ServiceID> -props <property>

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvcctl command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52147-I

cscsvcctl will now start.

Description: The cscsvcctl command will start.
(S): Resumes processing.

KEOS52148-I

cscsvcctl ended normally.

Description: The cscsvcctl command ended normally.
(S): Terminates processing.

KEOS52149-E

cscsvcctl ended abnormally.

Description: The cscsvcctl command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52150-I

Usage:

cscsvcls [-h] -user <User Id> -pass <Password> [-detail]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsvcls command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52151-I

cscsvcls will now start.

Description: The cscsvcls command will start.
(S): Resumes processing.

KEOS52152-I

cscsvcls ended normally.

Description: The cscsvcls command ended normally.
(S): Terminates processing.

KEOS52153-E

cscsvcls ended abnormally.

Description: The cscsvcls command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52154-E

The Service information was not found.

Description: The service information was not found.
(S): Terminates processing.
(O): The service adapter is not imported. Import the service adapter, and then re-execute the processing.

KEOS52159-I

Usage:

csccompoconfig [-h] -user <User Id> -pass <Password>

{

-operation get -csc <HCSC-Server Name> -name <ReceptionID>

| -operation set -propfile <Component Property File Path>

{ -csc <HCSC-Server Name> -name <ReceptionID>

| -cluster <Cluster Name> -name <ReceptionID> }

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the csccompoconfig command.
(S): Resumes processing.
(O): Check the message for the command usage.

KEOS52160-I

csccompoconfig will now start.

Description: The csccompoconfig command will start.
(S): Resumes processing.

KEOS52161-I

csccompoconfig ended normally.

Description: The csccompoconfig command ended normally.
(S): Resumes processing.

KEOS52162-E

csccompoconfig ended abnormally.

Description: The csccompoconfig command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52163-W

The specified service has not been deployed. (service name = aa....aa)

aa....aa: Service name

Description: The specified service component has not been allocated.
(S): Resumes processing.
(O): Make sure that the specified service component is deployed.

KEOS52164-W

The deployment check of the service could not be executed.

Description: The allocation of the service components could not be checked.
(S): Resumes processing.

KEOS52165-W

The specified component has already been deleted. (cluster name = aa....aa, component name = bb....bb)

aa....aa: Cluster name

bb....bb: Name of the component to be deployed

Description: The specified component has already been deleted.
(S): Terminates processing.

KEOS52166-W

The status of some information could not be acquired.

Description: The status of some information could not be obtained.
(S): Resumes processing.
(O): Check the message log for the error contents.

KEOS52175-I

The values in the cluster that must be unique will now be verified.

Description: The validation of the values that must be unique in the cluster will start.
(S): Resumes processing.

KEOS52176-I

The values in the cluster that must be unique were verified successfully.

Description: The validation of the values that must be unique in the cluster is complete.
(S): Resumes processing.

KEOS52177-I

The validity of the set value(s) will now be verified.

Description: The validity of the set values will be verified.
(S): Resumes processing.

KEOS52178-I

The validity of the set value(s) was verified successfully.

Description: The verification of the validity of the set values is complete.
(S): Resumes processing.

KEOS52179-E

The operation for the specified component cannot be executed. (HCSC-Server name = aa....aa, component type = bb....bb, component name = cc....cc)

aa....aa: HCSC server name

bb....bb: Specified component type

bp: Business process
adapter: Service adapter

cc....cc: Specified component name

Description: The operation for the specified component cannot be executed.
(S): Terminates processing.
(O): Make sure that the specified component ID is valid for the operation.

KEOS52180-W

An attempt to automatically back up the HCSC-Manager environment has failed.

Description: An attempt to automatically back up the HCSC-Manager environment failed.
(S): Resumes processing.
(O): Eliminate the cause of the error occurred in acquiring the automatic backup of the HCSC-Manager environment, and then acquire the backup file of the HCSC-Manager environment with the cscenvbackup command as needed.

KEOS52181-I

Usage:

cscapputil [-h] -user <User Id> -pass <Password>

{

-mng <Manager Name>

| -host <Host>:<Port> -mnguser <Manager Id>

[-mngpass <Manager Passwd>]

}

{

-operation { start | stop | delete }

-j2ee <J2EE Server Name> -app <Application Name>

| -operation list -j2ee <J2EE Server Name>

}

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscapputil command.
(S): Resumes processing.
(O): Check the message for the command usage.

KEOS52182-I

cscapputil will now start.

Description: The cscapputil command will start.
(S): Resumes processing.

KEOS52183-I

cscapputil ended normally.

Description: The cscapputil command ended normally.
(S): Resumes processing.

KEOS52184-E

cscapputil ended abnormally.

Description: The cscapputil command ended abnormally.
(S): Resumes processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52185-E

An error occurred while the definition file used to change the service information was being output. (details = aa....aa)

aa....aa: Detailed information

Description: An error occurred while the service-information change definition file was being output.
(S): Terminates processing.
(O): Check the detailed information, resolve the problem, and then re-execute the processing.

KEOS52186-I

The service information will now be acquired.

Description: The collection of the service information will start.
(S): Resumes processing.

KEOS52187-I

The service information was acquired successfully.

Description: The service information was obtained successfully.
(S): Resumes processing.

KEOS52188-I

The service information will now be set.

Description: The setup of the service information will start.
(S): Resumes processing.

KEOS52189-I

The service information was set successfully.

Description: The service information was set up successfully.
(S): Resumes processing.

KEOS52190-I

HCSC-Manager's backup file has been acquired. (file name = aa....aa)

aa....aa: Backup file name of the HCSC-Manager

Description: The HCSC-Manager environment was backed up successfully.
(S): Resumes processing.

KEOS52191-I

Backup file of repository has been acquired. (file name = aa....aa)

aa....aa: Name of the repository backup file

Description

The repository was backed up successfully.

Note that the backup file might be deleted when a command error occurs.

(S)

Resumes processing.

KEOS52192-I

Usage:

cscresinfo [-h] -user <UserID> -pass <Password>

-csc <HCSC-Server Name>

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscresinfo command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52193-I

cscresinfo will now start.

Description: The cscresinfo command will start.
(S): Resumes processing.

KEOS52194-I

cscresinfo ended normally.

Description: The cscresinfo command ended normally.
(S): Terminates processing.

KEOS52195-E

cscresinfo ended abnormally.

Description: The cscresinfo command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52196-E

An error occurred during the checking of properties-file combinations. (properties file name = aa....aa, property key of the error = bb....bb, value = cc....cc, property key of the error = dd....dd, value = ee....ee)

aa....aa: Property file name

bb....bb: Property key with error

cc....cc: Already set up value

dd....dd: Property key with error

ee....ee: Already set up value

Description: An error occurred during the checking of the property file combinations.
(S): Terminates processing.
(O): Check, and if necessary, revise the property file combinations, and then re-execute the command.

KEOS52197-I

Usage:

cscenvupdate [-h] -csc <HCSC-Server Name> [-force]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscenvupdate command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52198-I

cscenvupdate will now start.

Description: The cscenvupdate command will start.
(S): Resumes processing.

KEOS52199-I

cscenvupdate ended normally.

Description: The cscenvupdate command ended normally.
(S): Terminates processing.

KEOS52200-E

cscenvupdate ended abnormally.

Description: The cscenvupdate command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52201-I

The version of HCSC-Server will now be updated. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The version of the HCSC server will be updated.
(S): Resumes processing.

KEOS52202-I

The version of HCSC-Server has been updated. (HCSC-Server name = aa....aa)

aa....aa: HCSC server name

Description: The version of the HCSC server is updated.
(S): Terminates processing.

KEOS52203-E

cscenvupdate has already been executed. (HCSC-server name = aa....aa)

aa....aa: HCSC server name

Description: The cscenvupdate command is already running.
(S): Terminates processing.
(O): Check if any user is executing the cscenvupdate command. If no user is executing the cscenvupdate command, add the -force option, and then re-execute the cscenvupdate command.

KEOS52204-I

cscsetup will now start.

Description: The cscsetup command will start.
(S): Resumes processing.

KEOS52205-I

cscsetup ended normally.

Description: The cscsetup command ended normally.
(S): Terminates processing.

KEOS52206-E

cscsetup ended abnormally.

Description: The cscsetup command ended abnormally.
(S): Terminates processing.
(O): Check the error message that was displayed immediately before this message.

KEOS52207-I

Usage:

cscsetup [-h]

{

-setup <Definition Dir>

| -unsetup [-force]

| -change <Definition Dir>

}

[-yes]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscsetup command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52208-I

Usage:

cscmsgtk [-h]

-prf <PRF Trace File Path>

[-date [hhmmss[MMdd[yyyy]]],[hhmmss[MMdd[yyyy]]]

--

Version aa....aa(bb....bb)

aa....aa: Service Platform version

bb....bb: Service Platform product name

Description: This message describes the usage of the cscmsgtk command.
(S): Terminates processing.
(O): Check the message for the command usage.

KEOS52209-E

The command is invalid. (command = aa....aa)

Type 'help' for usage.

aa....aa: Entered command name

Description: The applicable command does not exist. Execute the Help command to check the command usage.
(S): Terminates processing.
(O): Check the command name, and then re-execute the command.

KEOS52210-E

A value is invalid. (value = aa....aa)

Type 'help' for usage.

aa....aa: Entered value

Description: The applicable command exists, but the specified method is incorrect. Execute the Help command to check the command usage.
(S): Terminates processing.
(O): Check the specification contents of the command, and then re-execute the command.

KEOS52211-E

The specified directory was not found. (directory = aa....aa)

aa....aa: Directory name

Description: The message trace read destination directory does not exist.
(S): Terminates processing.
(O): Check the directory specified in the message trace read destination, and then re-execute the command.

KEOS52212-E

The telegram search function is invalid. Re-execute the cscmsgtk command with the -tlg option.

Description: The message search function is disabled. The cscmsgtk command must be executed with the -tlg option.
(S): Terminates processing.
(O): Specify the -tlg option, and then re-execute the cscmsgtk command.

KEOS52213-E

The telegram trace file was not found in the telegram trace file directory. (directory = aa....aa)

aa....aa: Directory name

Description: The message trace file does not exist in the message trace read destination directory.
(S): Terminates processing.
(O): Check if the file beginning with csctelegram exists in the message trace read destination directory, and then re-execute the command.

KEOS52214-I

No traces satisfying the search conditions were found.

Description: The traces satisfying the search conditions were not found
(S): Resumes processing.
(O): Check, and if necessary, revise the search conditions, and then re-execute the command.

KEOS52215-E

The specified event ID was not found.

Description: The specified event was not found.
(S): Terminates processing.
(O): Check, and if necessary, revise the specified event ID, and then re-execute the command.

KEOS52216-E

The value specified for the service information change definition is invalid. (key = aa....aa, value = bb....bb, reason = cc....cc)

aa....aa: Definition

bb....bb: Value

cc....cc: Reason

The specified definition does not exist.: Definition does not exist
No value was specified.: Value does not exist
A value other than "true" or "false" was specified.: A value other than "true" or "false" is specified
A specified character was neither a space, nor a half-width alphanumeric character or symbol (ASCII codes 0x21-0x7e).: A character other than a one-byte alphanumeric character or symbol (ASCII codes '0x21' to '0x7E') and one-byte space (ASCII code '0x20') is specified
More than 40 bytes were specified.: More than 40 bytes were specified

Description: The value specified in the service-information change definition is invalid.
(S): The processing will end.
(O): Check the definition specifications.

KEOS52217-W

At least one line cannot be read.

Description: The specified file contains a line that cannot be read.
(S): Resumes processing.
(O): If the PRF trace to be analyzed can be read, ignore this message. If the trace to be analyzed cannot be read, take action against the cause, and then re-execute the command.

KEOS52218-E

The status of HCSC Production Environment Easy Setup is invalid. (expected status = aa....aa, current status = bb....bb)

aa....aa: Expected status of HCSC Production Environment Easy Setup

before_setup: Status before setup
setting: Status when setup is in progress
after_setup: Status after setup
unsetting: Status when unsetup is in progress

bb....bb: Current status of HCSC Production Environment Easy Setup

before_setup: Status before setup
setting: Status when setup is in progress
after_setup: Status after setup
unsetting: Status when unsetup is in progress

Description: The status of HCSC Production Environment Easy Setup is invalid.
(S): Terminates processing.
(O): Re-execute the command after matching the status.

KEOS52219-E

An error occurred during writing of a file. (file name = aa....aa, details = bb....bb)

aa....aa: Name of the file with error

bb....bb: Detailed error message

Description: An error occurred during the writing of a file.
(S): Terminates processing.
(O): Check the cause of the error and take an appropriate action. Re-execute the command after taking action.

KEOS52220-I

File copying will now start.

Description: The copying of the file will start.
(S): Resumes processing.

KEOS52221-I

File copying will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The file will be copied.
(S): Resumes processing.

KEOS52222-E

An attempt to copy a file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to copy a file failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52223-I

File copying will now end.

Description: The copying of the file will end.
(S): Resumes processing.

KEOS52224-I

Building of Cosminexus Manager will now start.

Description: The setup of Manager will start.
(S): Resumes processing.

KEOS52225-I

Building of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: Manager will be set up.
(S): Resumes processing.

KEOS52226-E

An attempt to build Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up Manager failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52227-I

Building of Cosminexus Manager will now end.

Description: The setup of Manager will end.
(S): Resumes processing.

KEOS52228-I

Cosminexus Manager will now start.

Description: Manager will start.
(S): Resumes processing.

KEOS52229-I

Startup of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of Manager will be executed.
(S): Resumes processing.

KEOS52230-E

An attempt to start Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start Manager failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52231-I

Startup of Cosminexus Manager will now end.

Description: The startup of Manager will end.
(S): Resumes processing.

KEOS52232-I

Building of the logical server will now start.

Description: The setup of the logical server will start.
(S): Resumes processing.

KEOS52233-I

Building of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The logical server will be set up.
(S): Resumes processing.

KEOS52234-E

An attempt to build the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52235-I

Building of the logical server will now end.

Description: The setup of the logical server will end.
(S): Resumes processing.

KEOS52236-I

The logical server will now start.

Description: The logical server will start.
(S): Resumes processing.

KEOS52237-I

Startup of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of the logical server will be executed.
(S): Resumes processing.

KEOS52238-E

An attempt to start the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52239-I

Startup of the logical server will now end.

Description: The startup of the logical server will end.
(S): Resumes processing.

KEOS52240-I

Building of HCSC-Server will now start.

Description: The setup of the HCSC server will start.
(S): Resumes processing.

KEOS52241-I

Building of HCSC-Server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The HCSC server will be set up.
(S): Resumes processing.

KEOS52242-E

An attempt to build HCSC-Server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the HCSC server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52243-I

Building of HCSC-Server will now end.

Description: The setup of the HCSC server will end.
(S): Resumes processing.

KEOS52244-I

Stopping of the logical server will now start.

Description: The stopping of the logical server will start.
(S): Resumes processing.

KEOS52245-I

Stopping of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The logical server will be stopped.
(S): Resumes processing.

KEOS52246-E

An attempt to stop the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to stop the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52247-I

Stopping of the logical server will now end.

Description: The stopping of the logical server will end.
(S): Resumes processing.

KEOS52248-I

Deletion of HCSC-Server will now start.

Description: The deletion of the HCSC server will start.
(S): Resumes processing.

KEOS52249-I

Deletion of HCSC-Server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The HCSC server will be deleted.
(S): Resumes processing.

KEOS52250-E

An attempt to delete HCSC-Server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the HCSC server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52251-I

Deletion of HCSC-Server will now end.

Description: The deletion of the HCSC server will end.
(S): Resumes processing.

KEOS52252-I

Deletion of the logical server will now start.

Description: The deletion of the logical server will start.
(S): Resumes processing.

KEOS52253-I

Deletion of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The logical server will be deleted.
(S): Resumes processing.

KEOS52254-E

An attempt to delete the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52255-I

Deletion of the logical server will now end.

Description: The deletion of the logical server will end.
(S): Resumes processing.

KEOS52256-I

Stopping of Cosminexus Manager will now start.

Description: The stopping of Manager will start.
(S): Resumes processing.

KEOS52257-I

Stopping of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The stopping of Manager will be executed.
(S): Resumes processing.

KEOS52258-E

An attempt to stop Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to stop Manager failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52259-I

Stopping of Cosminexus Manager will now end.

Description: The stopping of Manager will end.
(S): Resumes processing.

KEOS52260-I

Deletion of Cosminexus Manager will now start.

Description: The deletion of Manager will start.
(S): Resumes processing.

KEOS52261-I

Deletion of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: Manager will be deleted.
(S): Resumes processing.

KEOS52262-E

An attempt to delete Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete Manager failed.
(S): The processing will end.
(O): Reference the message that is output, and determine whether action is required for the cause of the error. If action is required, take the required corrective action.

KEOS52263-I

Deletion of Cosminexus Manager will now end.

Description: The deletion of Manager will end.
(S): Resumes processing.

KEOS52264-I

HCSC Production Environment Easy Setup will now start changing the environment.

Description: The changes in HCSC Production Environment Easy Setup will start.
(S): Resumes processing.

KEOS52265-I

Modification of the file will now start. (file = aa....aa)

aa....aa: File name

Description: The modification of the file will start.
(S): Resumes processing.

KEOS52266-I

Modification of the file will now be executed (details = aa....aa)

aa....aa: Detailed information

Description: The file will be modified.
(S): Resumes processing.

KEOS52267-W

Modification of the file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to modify the file failed.
(S): The processing continues.
(O): Reference the message that is output, and determine whether action is required for the cause of the error. If action is required, take the required corrective action.

KEOS52268-I

Modification of the file will now end. (file = aa....aa)

aa....aa: File name

Description: The modification of the file will end.
(S): Resumes processing.

KEOS52269-Q

The logical server (PRF, J2EE server, and Web server) will start or stop. Is this OK? (Y/N)

Description: This message confirms whether the logical server (PRF, J2EE server, and Web server) can be started or stopped.
(S): Resumes processing.
(O): If no problem exists, press the Y key and if some problem exists, press the N key.

KEOS52270-I

HCSC Production Environment Easy Setup will now finish changing the environment.

Description: The changes in HCSC Production Environment Easy Setup will end.
(S): Resumes processing.

KEOS52271-I

HCSC Production Environment Easy Setup will now start setup.

Description: The setup of HCSC Production Environment Easy Setup will start.
(S): Resumes processing.

KEOS52272-I

HCSC Production Environment Easy Setup will now finish setup. (soap-mode = aa....aa)

aa....aa: SOAP mode (SOAP1.1 or SOAP1.1/1.2 combined mode)

Description: The setup of HCSC Production Environment Easy Setup will end
(S): Resumes processing.

KEOS52273-I

HCSC Production Environment Easy Setup will now start unsetup.

Description: The setup cancellation of HCSC Production Environment Easy Setup will start.
(S): Resumes processing.

KEOS52274-I

HCSC Production Environment Easy Setup will now finish unsetup.

Description: The setup cancellation of HCSC Production Environment Easy Setup will end.
(S): Resumes processing.

KEOS52275-E

An attempt by HCSC Production Environment Easy Setup to change the environment has failed. (details = aa....aa)

aa....aa: Names of files in which changes failed are output using "," (comma) delimiter

Description: An attempt to change HCSC Production Environment Easy Setup failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS52276-W

File deletion has failed. (file = aa....aa)

aa....aa: File name

Description: An attempt to delete the file failed.
(S): Resumes processing.
(O): Delete the file that could not be deleted.

KEOS52278-E

A trace to be analyzed did not exist in the read file.

Description: The trace to be parsed did not exist in the file that was read.
(S): Terminates processing.

KEOS52279-W

No traces existed for the specified time. If you want to return to the original state, type 'focus'.

Description: No traces were found for the specified time. If you want to return to the original state, enter 'focus'.
(S): Resumes processing.

KEOS52280-I

The search will now start. (search condition (WHERE phrase) = aa....aa)

aa....aa: Search condition

Description: The search will start with the condition displayed in the message.
(S): Resumes processing.

KEOS52281-I

Deletion of the execution logs for the selected process instance will now start. (deletion condition (type = aa....aa) = [bb....bb])

aa....aa: Condition type

idlist: Deletion based on the process instance identifier list
where: Deletion based on conditions other than the process instance identifiers

bb....bb: Deletion condition

Description: The deletion of the execution logs for the process instances will start with the conditions displayed in the message.
(S): Resumes processing.

KEOS52282-E

The specified number exceeds the maximum specifiable number. (specified number = aa....aa, maximum specifiable number = bb....bb)

aa....aa: Specified number

bb....bb: Specifiable number

Description: The specified number exceeds the specifiable number.
(S): Terminates processing.
(O): Input the specifiable number, and then re-execute the command.

KEOS52283-E

The specified value is not a directory. (specified value = aa....aa)

aa....aa: Specified value

Description: The specified value is not a directory.
(S): Terminates processing.
(O): Specify a directory as the value.

KEOS52284-E

An environment has already been set up by something other than HCSC Production Environment Easy Setup. (value = aa....aa)

aa....aa: String for the setup environment

Description: Another environment has already been set up by a function other than HCSC Production Environment Easy Setup.
(S): Terminates processing.
(O): Unset up the other environment that has already been set up.

KEOS52285-I

The PRF trace is being loaded. This process might take some time.

Description: The PRF trace is being read. This process might take some time.
(S): Resumes processing.

KEOS52286-I

aa....aa records have been loaded.

aa....aa: Number of lines that have been read

Description: The reading of the number of lines displayed in the message is complete.
(S): Terminates processing.

KEOS52287-W

An attempt to copy a file has failed. (details =aa....aa)

aa....aa: Detailed information

Description: An attempt to copy a file failed.
(S): Resumes processing.

KEOS52288-W

An attempt to delete HCSC-Server has failed. (details =aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the HCSC server failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take appropriate action for the cause of the error. If necessary, take action against the cause of the error.

KEOS52289-W

An attempt to delete Cosminexus Manager has failed. (details =aa....aa)

aa....aa: Detailed information

Description: An attempt to delete Manager failed.
(S): Resumes processing.

KEOS52290-I

Re-execution of process instances has finished. (succeeded = aa....aa, failed = bb....bb)

aa....aa: Successful instances

bb....bb: Failed instances

Description: The re-execution of process instances is complete.
(S): The processing will end.

KEOS52291-E

The owner name is invalid. (owner name = aa....aa)

aa....aa: Owner name

Description: The owner name is invalid.
(S): The processing will end.
(O): Check whether the value specified for the owner of cscsetup.properties can be used with the OS. For other causes, re-execute the processing. If the same error occurs, contact maintenance personnel.

KEOS52292-E

The group name is invalid. (group name = aa....aa)

aa....aa: Group name

Description: The group name is invalid.
(S): The processing will end.
(O): Check whether the value specified for the group of cscsetup.properties can be used with the OS. For other causes, re-execute the processing. If the same error occurs, contact maintenance personnel.

KEOS52293-I

Initialization processing will now start.

Description: The initialization processing will start.
(S): The processing continues.

KEOS52294-I

Initialization processing will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The initialization processing will be executed.
(S): The processing continues.

KEOS52295-E

Initialization processing has failed. (details = aa....aa)

aa....aa: Detailed information

Description: The initialization processing failed.
(S): The processing will end.
(O): Reference the message that is output, and then take the required corrective action for the cause of the error.

KEOS52296-I

Initialization processing will now end.

Description: The initialization processing will end.
(S): The processing continues.

KEOS52297-I

End processing will now start.

Description: The end processing will start.
(S): The processing continues.

KEOS52298-I

End processing will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The end processing will be executed.
(S): The processing continues.

KEOS52299-E

End processing has failed. (details = aa....aa)

aa....aa: Detailed information

Description: The end processing has failed.
(S): The processing will end.
(O): Reference the message that is output, and then take the required corrective action for the cause of the error.

KEOS52300-W

End processing has failed. (details = aa....aa)

aa....aa: Detailed information

Description: The end processing has failed.
(S): The processing continues.
(O): Reference the message that is output, and then determine whether action is required for the cause of the error. If action is required, take the required corrective action.

KEOS52301-I

End processing will now end.

Description: The end processing will end.
(S): The processing continues.

KEOS52302-W

The file to be changed is not in the directory. (directory = aa....aa)

aa....aa: Directory name

Description

The file to be changed was not found in the read destination directory.

(S)

The processing continues.

(O)

Check the following details:

Is the storage directory of the specified definition file incorrect?
Does the definition file exist in the specified directory?

KEOS52303-E

An attempt to check the directory has failed. (details = aa....aa, directory = bb....bb)

aa....aa: Detailed information

bb....bb: Directory name

Description: An attempt to check the directory failed.
(S): The processing will end.
(O): Reference the details, and then take action.

KEOS52304-I

A definition file get operation will now start.

Description: The processing to obtain (get is specified in the -operation option of the csccmctl command) the definition file set up in the development environment will start.
(S): Processing continues.

KEOS52305-I

A definition file get operation has ended successfully.

Description: The processing to obtain (get is specified in the -operation option of the csccmctl command) the definition file set up in the development environment ended successfully.
(S): Processing ends.

KEOS52306-I

A definition file set operation will now start.

Description: The processing to set up (set is specified in the -operation option of the csccmctl command) the definition file in the operating environment will start.
(S): Processing continues.

KEOS52307-I

A definition file set operation has ended successfully.

Description: The processing to set up (set is specified in the -operation option of the csccmctl command) the definition file in the operating environment ended successfully.
(S): Processing ends.

KEOS52308-I

A definition file reset operation will now start.

Description: The processing to delete (reset is specified in the -operation option of the csccmctl command) the definition file set in the operating environment will start.
(S): Processing continues.

KEOS52309-I

A definition file reset operation has ended successfully.

Description: The processing to delete (reset is specified in the -operation option of the csccmctl command) the definition file set in the operating environment ended successfully.
(S): Processing ends.

KEOS52310-W

The specified definition file does not found in the repository. (clusterName = aa....aa, component name = bb....bb, definitionFileName = cc....cc)

aa....aa: Cluster name

bb....bb: Service ID or Reception ID

cc....cc: Definition file name

Description: The specified definition file was not found in the repository.
(S): Processing ends.
(O): Execute the cscsvcls command to check whether the definition file has been set up and that the definition file name specified in the argument is correct.

KEOS52311-E

The set value is invalid in validation check. (clusterName = aa....aa, component name = bb....bb, definitionFileName = cc....cc)

aa....aa: Cluster name

bb....bb: Service ID or Reception ID

cc....cc: Definition file name

Description: An invalid value was detected during the checking of the specified definition file.
(S): Processing ends.
(O): Review and, if necessary, revise the contents of the definition file. Also, see the error message displayed just before this message, and eliminate the cause of the error.

KEOS52312-E

Definition file cannot change because definition file has been deployed. (clusterName= aa....aa, component name = bb....bb)

aa....aa: Cluster name

bb....bb: Service ID or Reception ID

Description: This command was used for an allocated component.
(S): Processing ends.
(O): Use this command for an unallocated component.

KEOS52313-E

The specified definition file does not found. (clusterName = aa....aa, component name = bb....bb, definitionFileName = cc....cc)

aa....aa: Cluster name

bb....bb: Service ID or Reception ID

cc....cc: Definition file name

Description: The specified definition file was not found.
(S): Processing ends.
(O): Execute the cscsvcls command to check whether the definition file indicated by the service ID or reception ID exists. Also, see the error message displayed just before this message, and eliminate the cause of the error.

KEOS52314-I

The custom EAR File will now be changed.

Description: The modification of the EAR file will start.
(S): Processing continues.

KEOS52315-I

The custom EAR File was changed successfully.

Description: The EAR file was changed successfully.
(S): Processing continues.

KEOS52316-W

Part of a definition file failed to load. (clusterName= aa....aa, component name = bb....bb, definitionFileName = cc....cc, details = dd....dd)

aa....aa: Cluster name

bb....bb: Service ID or Reception ID

cc....cc: Definition file name

dd....dd: Details

Description: A part of the definition file could not be loaded.
(S): Processing continues.
(O): Review and, if necessary, revise the definition file indicated by the service ID or reception ID. Also, check the details that have been output to the message log.

KEOS52317-I

Usage:

csccmctl [-h] -user <UserID> -pass <Password>

-cluster <Cluster Name> -name <ServiceID | ReceptionID>

-targetfilename <Definition File Name>

[-basedir<BaseDirectory>] -operation { get | set | reset }

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the csccmctl command.
(S): Processing ends.
(O): See the message to check the usage of the csccmctl command.

KEOS52318-I

csccmctl will now start.

Description: The csccmctl command will start.
(S): Processing continues.

KEOS52319-I

csccmctl ended normally.

Description: The csccmctl command ended normally.
(S): Processing ends.

KEOS52320-E

csccmctl ended abnormally.

Description: The csccmctl command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52321-I

Usage:

cscrepcheck [-h] -user <UserID> -pass <Password>

-repfile <Zip File Name>

[-compo [-name <service ID> or UserDefinedReception(selectable) <ReceptionID>]]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscrepcheck command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52322-I

cscrepcheck will now start.

Description: The cscrepcheck command will start.
(S): Processing continues.

KEOS52323-I

cscrepcheck ended normally.

Description: The cscrepcheck command ended normally.
(S): Processing ends.

KEOS52324-E

cscrepcheck ended abnormally.

Description: The cscrepcheck command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52325-E

The library version of HCSC Server is illegal. (HCSC-Server name = aa....aa, clusterName = bb....bb, HCSC-Server version = cc....cc, HCSC-Server-Library version = dd....dd)

aa....aa: HCSC server name

bb....bb: Cluster name

cc....cc: Version installed in the runtime environment

dd....dd: Library version of the runtime environment

Description: The library version of the execution environment is invalid.
(S): Processing ends.
(O): Restart Management Server. If the problem is not resolved, contact maintenance personnel.

KEOS52326-E

A definition file management command was executed for a component that is not custom reception or for a custom adapter. (clusterName= aa....aa, component name = bb....bb, Service Type = cc....cc)

aa....aa: Cluster name

bb....bb: Component name

cc....cc: Service type

Description

A definition file management command was executed for a component that is not a custom reception or custom adapter^#.

(S)

Processing ends.

(O)

Use this command for a custom reception or custom adapter component.

Note#

This means either of the following:

User-defined reception
Adapter that is provided with the product and implemented by using the custom adapter development framework

KEOS52327-E

The command cannot be executed because the repository contains multiple clusters.

Description: The command cannot be executed when the repository or repository ZIP file contains multiple clusters.
(S): Processing is interrupted.

KEOS52328-E

User-defined reception cannot be specified. (command argument = aa....aa, component name = bb....bb)

aa....aa: Command argument

bb....bb: Reception ID

Description: The user-defined reception cannot be specified.
(S): Processing is interrupted.
(O): Check the component name specified in the command argument.

KEOS52329-E

The specified component is not found in the repository. (component name = aa....aa)

aa....aa: Service ID or reception ID

Description: The specified HCSC component does not exist in the repository.
(S): Processing is interrupted.
(O): Check the component name specified for the command argument.

KEOS52330-I

Usage:

cscfscls [-h] -user <UserID> -pass <Password>

{ -cluster <Cluster Name> | -csc <HCSC-Server Name> }

{ -folder <Common Folder> | -all }

[ -t <Start Time> | -d <Days> ]

[ -recursive ]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscfscls command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52331-I

Usage:

cscfscrm [-h] -user <UserID> -pass <Password>

{ -cluster <Cluster Name> | -csc <HCSC-Server Name> }

{ -folder <Common Folder> [ -targetfilename <File Name> | -t <Start Time> | -d <Days> ]

| -all [ -t <Start Time> | -d <Days> ]}

[ -retrycount <Retry Count>] [ -retryinterval <Retry Interval>]

[ -recursive ]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscfscrm command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52332-I

Usage:

cscfswls [-h] -user <UserID> -pass <Password>

{ -cluster <Cluster Name> | -csc <HCSC-Server Name> }

{ -name <Component Name> | -all }

[ -t <Start Time> | -d <Days> ]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscfswls command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52333-I

Usage:

cscfswrm [-h] -user <UserID> -pass <Password>

{ -cluster <Cluster Name> | -csc <HCSC-Server Name> }

{ -name <Component Name> | -all }

[ -t <Start Time> | -d <Days> ]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscfswrm command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52334-I

cscfscls will now start.

Description: The cscfscls command will start.
(S): Processing continues.

KEOS52335-I

cscfscls ended normally.

Description: The cscfscls command ended normally.
(S): Processing ends.

KEOS52336-E

cscfscls ended abnormally.

Description: The cscfscls command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52337-I

cscfscrm will now start.

Description: The cscfscrm command will start.
(S): Processing continues.

KEOS52338-I

cscfscrm ended normally.

Description: The cscfscrm command ended normally.
(S): Processing ends.

KEOS52339-E

cscfscrm ended abnormally.

Description: The cscfscrm command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52340-I

cscfswls will now start.

Description: The cscfswls command will start.
(S): Processing continues.

KEOS52341-I

cscfswls ended normally.

Description: The cscfswls command ended normally.
(S): Processing ends.

KEOS52342-E

cscfswls ended abnormally.

Description: The cscfswls command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52343-I

cscfswrm will now start.

Description: The cscfswrm command will start.
(S): Processing continues.

KEOS52344-I

cscfswrm ended normally.

Description: The cscfswrm command ended normally.
(S): Processing ends.

KEOS52345-E

cscfswrm ended abnormally.

Description: The cscfswrm command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52346-W

The end of the filename is deleted for the format adjustment. (original filename = aa....aa, displayed filename = bb....bb)

aa....aa: Original file name

bb....bb: Displayed file name

Description: The end of the file name will be deleted for adjusting the format.
(S): Processing continues.

KEOS52347-I

A part of file name in a common folder is cut off and displayed.

Description: The end of the file name in a common folder has been deleted.
(S): Processing continues.
(O): See the KEOS52346-W message that has been output to the message log.

KEOS52348-I

Usage:

cscrepupdate [-h] -user <UserID> -pass <Password>

-inputfile <Zip File Name> -outputfile <Zip File Name>

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscrepupdate command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52349-I

cscrepupdate will now start.

Description: The cscrepupdate command will start.
(S): Processing continues.

KEOS52350-I

cscrepupdate ended normally.

Description: The cscrepupdate command ended normally.
(S): Processing ends.

KEOS52351-E

cscrepupdate ended abnormally.

Description: The cscrepupdate command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52352-E

The specified input file and output file are the same file.

Description: The same file is specified as the input file and output file.
(S): Processing ends.
(O): Specify a file different from the input file as the output file.

KEOS52353-I

The specified file is the latest version. (version = aa....aa)

aa....aa: Version of the repository

Description: The specified file is the latest version.
(S): Processing continues.

KEOS52354-I

Usage:

cscprecache [-h] -user <UserID> -pass <Password>

-csc <HCSC-Server Name> [-name <Component Name>]

--

Version aa....aa(bb....bb)

aa....aa: Service platform version

bb....bb: Service platform product name

Description: This message describes the usage of the cscprecache command.
(S): Processing ends.
(O): See the message to check the usage of the command.

KEOS52355-I

cscprecache will now start.

Description: The cscprecache command will start.
(S): Processing continues.

KEOS52356-I

cscprecache ended normally.

Description: The cscprecache command ended normally.
(S): Processing ends.

KEOS52357-E

cscprecache ended abnormally.

Description: The cscprecache command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KEOS52358-E

An error occurred while checking the HCSC component specification file. (file name = aa....aa, specified value = bb....bb)

aa....aa: File name

bb....bb: Specified value

Description: An error occurred during the validation of the HCSC component-specification file.
(S): Processing ends.
(O): Check the specifications, and then re-execute the processing.

KEOS52500-I

HCSC-Manager has started.

Description: HCSC-Manager has started.
(S): Resumes processing.

KEOS52501-I

HCSC-Manager ended.

Description: HCSC-Manager has ended.
(S): Resumes processing.

KEOS52502-I

Login was selected.

Description: The login was selected from the menu.
(S): Resumes processing.

KEOS52503-I

Login to HCSC-Manager will now stop. (details = aa....aa)

aa....aa: Cause of interruption

Description: the login processing will be canceled.
(S): Terminates the login processing.
(O): If the processing was cancelled due to an error, eliminate the cause of the error, and then re-execute the login processing.

KEOS52504-W

Login to HCSC-Manager has already finished.

Description: Cannot log in because the user is already logged in.
(S): Terminates the login processing.

KEOS52505-I

Logout was selected.

Description: The logout was selected from the menu.
(S): Resumes processing.

KEOS52506-I

Logout from HCSC-Manager will now stop.

Description: the logout processing will be canceled.
(S): Terminates the logout processing.
(O): If the processing was cancelled due to an error, eliminate the cause of the error, and then re-execute the logout processing.

KEOS52507-W

Logout from HCSC-Manager has already finished.

Description: Cannot log out because the user has already logged out.
(S): Terminates the logout processing.

KEOS52508-Q

The user will be logged out from HCSC-Manager. Is this OK?

Description: This message confirms whether to execute the logout processing.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52509-I

In the dialog box, [Yes] was selected.

Description: The user clicked the Yes dialog box.
(S): Resumes processing.

KEOS52510-I

In the dialog box, [No] was selected.

Description: The user clicked the No dialog box.
(S): Terminates processing.

KEOS52514-I

The HCSC-Manager view will be created.

Description: The HCSC-Manager view will be created.

KEOS52515-I

The creation of the HCSC-Manager view has finished.

Description: The creation of the HCSC-Manager view is complete.
(S): Resumes processing.

KEOS52516-E

An error occurred in the display of the HCSC-Manager view. (details = aa....aa)

aa....aa: Error details

Description: An error occurred while the HCSC-Manager view was being created.
(S): Terminates the HCSC-Manager view creation processing.
(O): Check the detailed error information.

KEOS52517-I

The HCSC-Manager view closed.

Description: The HCSC-Manager view is closed.
(S): Resumes processing.

KEOS52518-I

The information acquisition will now start.

Description: The obtaining of the information will start.
(S): Resumes processing.

KEOS52519-I

The information was acquired successfully.

Description: The information was acquired successfully.
(S): Resumes processing.

KEOS52520-Q

The HCSC-Server "aa....aa" will start. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for starting the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52521-Q

The HCSC-Server "aa....aa" will stop. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for stopping the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52522-Q

The standard reception for the HCSC-Server "aa....aa" will now start. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for starting the standard reception of the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52523-Q

A normal stop of the standard reception for the HCSC-Server "aa....aa" will now be performed. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for the normal termination of the standard reception for the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52524-Q

A planned stop of the standard reception for the HCSC-Server "aa....aa" will now be performed. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for the planned termination of the standard reception for the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52525-Q

The linkage reception for the HCSC-Server "aa....aa" will now start. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for starting the linkage reception for the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52526-Q

A normal stop of the linkage reception for the HCSC-Server "aa....aa" will now be performed. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for the normal termination of the linkage reception for the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52527-Q

A planned stop of the linkage reception for the HCSC-Server "aa....aa" will be performed. Is this OK?

aa....aa: HCSC server name

Description: This is a confirmation message for the planned termination of the linkage reception for the HCSC server.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52528-Q

The HCSC-Server "aa....aa" and the cluster "bb....bb" will be linked. Is this OK?

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: This is a confirmation message for starting the link between the HCSC server and cluster.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52529-Q

The linkage of the HCSC-Server "aa....aa" and the cluster "bb....bb" will be stopped. Is this OK?

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: This is a confirmation message for stopping the link between the HCSC server and cluster.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52530-Q

The business process "aa....aa" will start. Is this OK?

aa....aa: Service ID of the business process

Description: This is a confirmation message for starting the business process.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52531-Q

The business process "aa....aa" will stop. Is this OK?

aa....aa: Service ID of the business process

Description: This is a confirmation message for stopping the business process.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52532-Q

The service adapter "aa....aa" will start. Is this OK?

aa....aa: Service name of the service adapter

Description: This is a confirmation message for starting the service adapter.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52533-Q

The service adapter "aa....aa" will stop. Is this OK?

aa....aa: Service name of the service adapter

Description: This is a confirmation message for stopping the service adapter.
(S): Resumes processing.
(O): To log out, click the OK button, and to not log out, click the Cancel button.

KEOS52534-I

The HCSC-Server started successfully. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the HCSC server started successfully.
(S): Resumes processing.

KEOS52535-I

The HCSC-Server stopped successfully. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the HCSC server stopped successfully.
(S): Resumes processing.

KEOS52536-I

The standard reception for the HCSC-Server started successfully. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the standard reception for the HCSC server started successfully.
(S): Resumes processing.

KEOS52537-I

The normal stop of the standard reception for the HCSC-Server was successful. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the normal termination of the standard reception for the HCSC server was successful.
(S): Resumes processing.

KEOS52538-I

The linkage reception for the HCSC-Server started successfully. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the linkage reception for the HCSC server started successfully.
(S): Resumes processing.

KEOS52539-I

The normal stop of the linkage reception for the HCSC-Server was successful. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the normal termination of the linkage reception for the HCSC server was successful.
(S): Resumes processing.

KEOS52540-I

The HCSC-Server and the cluster linked successfully. (HCSC-Server = aa....aa, cluster = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: This message confirms that the HCSC server and cluster were linked successfully.
(S): Resumes processing.

KEOS52541-I

The linkage of the HCSC-Server and the cluster ended normally. (HCSC-Server = aa....aa, cluster = bb....bb)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

Description: This message confirms that the link between the HCSC server and cluster stopped successfully.
(S): Resumes processing.

KEOS52542-I

The business process started successfully. (business process = aa....aa)

aa....aa: Service ID of the business process

Description: This message confirms that the business process started successfully.
(S): Resumes processing.

KEOS52543-I

The business process ended normally. (business process = aa....aa)

aa....aa: Service ID of the business process

Description: This message confirms that the business process stopped successfully.
(S): Resumes processing.

KEOS52544-I

The service adapter started successfully. (service adapter = aa....aa)

aa....aa: Service name of the service adapter

Description: This message confirms that the service adapter started successfully.
(S): Resumes processing.

KEOS52545-I

The service adapter stopped successfully. (service adapter = aa....aa)

aa....aa: Service name of the service adapter

Description: This message confirms that the service adapter stopped successfully.
(S): Resumes processing.

KEOS52546-E

An attempt to start the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to start the HCSC server failed.
(S): Terminates the HCSC server start processing.
(O): Check the detailed error information.

KEOS52547-E

An attempt to stop the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to stop the HCSC server failed.
(S): Terminates the HCSC server termination processing.
(O): Check the detailed error information.

KEOS52548-E

An attempt to start the standard reception for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to start the standard reception for the HCSC server failed.
(S): Terminates the standard reception start processing of the HCSC server.
(O): Check the detailed error information.

KEOS52549-E

An attempt to execute a normal stop of the standard reception for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to normally terminate the standard reception for the HCSC server failed.
(S): Terminates the normal termination processing of the standard reception of the HCSC server.
(O): Check the detailed error information.

KEOS52550-E

An attempt to start the Linkage service for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to start the linkage reception for the HCSC server failed.
(S): Terminates the linkage reception start processing of the HCSC server.
(O): Check the detailed error information.

KEOS52551-E

An attempt to execute a normal stop of the linkage reception for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to normally terminate the linkage reception for the HCSC server failed.
(S): Terminates the normal termination processing of the linkage reception for the HCSC server.
(O): Check the detailed error information.

KEOS52552-E

An attempt to link the HCSC-Server and the cluster has failed. (HCSC-Server = aa....aa, cluster = bb....bb, details = cc....cc)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

cc....cc: Error details

Description: An attempt to link the HCSC server and cluster failed.
(S): Terminates linkage start processing between the HCSC server and cluster.
(O): Check the detailed error information.

KEOS52553-E

An attempt to end the linkage for the HCSC-Server and the cluster has failed. (HCSC-Server = aa....aa, cluster = bb....bb, details = cc....cc)

aa....aa: Name of the HCSC server at the linkage source

bb....bb: Name of the cluster at the linkage destination

cc....cc: Error details

Description: An attempt to stop the link between the HCSC server and cluster failed.
(S): Terminates linkage termination processing between the HCSC server and cluster.
(O): Check the detailed error information.

KEOS52554-E

An attempt to start the business process has failed. (business process = aa....aa details = bb....bb)

aa....aa: Service ID of the business process

bb....bb: Error details

Description: An attempt to start the business process failed.
(S): Terminates the business process start processing.
(O): Check the detailed error information.

KEOS52555-E

An attempt to stop the business process has failed. (business process = aa....aa details = bb....bb)

aa....aa: Service ID of the business process

bb....bb: Error details

Description: An attempt to stop the business process failed.
(S): Terminates the business process termination processing.
(O): Check the detailed error information.

KEOS52556-E

An attempt to start the service adapter has failed. (service adapter = aa....aa, details = bb....bb)

aa....aa: Service name of the service adapter

bb....bb: Error details

Description: An attempt to start the service adapter failed.
(S): Terminates the service adapter start processing.
(O): Check the detailed error information.

KEOS52557-E

An attempt to stop the service adapter has failed. (service adapter = aa....aa, details = bb....bb)

aa....aa: Service name of the service adapter

bb....bb: Error details

Description: An attempt to stop the service adapter failed.
(S): Terminates the service adapter termination processing.
(O): Check the detailed error information.

KEOS52558-I

The HCSC-Manager editor for "aa....aa" "bb....bb" was created.

aa....aa: Type of managed target

bb....bb: Name of managed target

Description: The HCSC-Manager editor was created.
(S): Resumes processing.

KEOS52559-I

The HCSC-Manager editor for "aa....aa" "bb....bb" was closed.

aa....aa: Type of managed target

bb....bb: Name of managed target

Description: The HCSC-Manager editor was closed.
(S): Resumes processing.

KEOS52560-E

An attempt to create the HCSC-Manager editor for "aa....aa" has failed. (details = bb....bb)

aa....aa: Name of managed target

bb....bb: Error details

Description: An attempt to create the HCSC-Manager editor failed.
(S): Terminates the HCSC-Manager editor creation processing.
(O): Check information about the managed target.

KEOS52561-W

aa....aa "bb....bb" does not yet have the "Assigned" status.

aa....aa: Type of managed target

bb....bb: Name of managed target

Description: The editor cannot be created because the managed target displayed in the message has not yet been allocated.
(S): Terminates the HCSC-Manager editor creation processing.
(O): Use the command to deploy the managed target.

KEOS52562-W

An attempt to cancel the lock has failed. Please close Eclipse first, and then cancel the lock.

Description: An attempt to cancel the lock failed.
(S): Terminates processing.
(O): Restart Eclipse.

KEOS52563-I

The operation status of the server in the cluster will be checked.

Description: The operation status of the server in the cluster will be checked.
(S): Resumes processing.

KEOS52564-I

The operation status of the server in the cluster has been checked.

Description: The checking of the operation status of the server in the cluster is complete.
(S): Resumes processing.

KEOS52565-I

The planned stop of the standard reception for the HCSC-Server was successful. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the planned termination of the standard reception for the HCSC server was successful.
(S): Resumes processing.

KEOS52566-I

The planned stop of the linkage reception for the HCSC-Server was successful. (HCSC-Server = aa....aa)

aa....aa: HCSC server name

Description: This message confirms that the planned termination of the linkage reception for the HCSC server was successful.
(S): Resumes processing.

KEOS52567-E

An error occurred while the displayed information was being modified. (details = aa....aa)

aa....aa: Error details

Description: An error occurred while the displayed information was being updated.
(S): Terminates processing.
(O): Check the detailed error information.

KEOS52568-E

An attempt to acquire the information failed during creation of the tree.

Description: An attempt to obtain the information failed one or more times while the tree was being created.
(S): Resumes processing.
(O): Check information about the error immediately preceding this one.

KEOS52569-I

Processing is currently being performed. Please wait a while.

Description: The processing associated with the communication is being executed.
(S): Resumes processing.
(O): Wait until the progress dialog box disappears.

KEOS52570-E

The operation information was not acquired correctly. (details = aa....aa)

aa....aa: Error details

Description: The status could not be obtained correctly from the execution environment.
(S): Resumes processing.
(O): Check the detailed error information.

KEOS52571-Q

The user-defined reception "aa....aa" will now start. Is this OK?

aa....aa: User-defined reception

Description: This is a confirmation message for starting the user-defined reception.
(S): Resumes processing.
(O): Click the OK button to continue and the Cancel button to interrupt the processing.

KEOS52572-Q

The user-defined reception "aa....aa" will now stop. Is this OK?

aa....aa: User-defined reception

Description: This is a confirmation message for stopping the user-defined reception.
(S): Resumes processing.
(O): Click the OK button to continue and the Cancel button to interrupt the processing.

KEOS52574-Q

Do you want to switch to a valid perspective for the HCSC-Manager?

Description: This is a confirmation message for switching to a perspective that is appropriate for the HCSC operating environment.
(S): Resumes processing.
(O): Click the Yes button to switch to the HCSC-Manager perspective and the No button to continue with the existing perspective.

KEOS52575-I

Page "aa....aa" of the "bb....bb" editor will be displayed.

aa....aa: Name of managed target

bb....bb: Name of the page

Description: The active editor will be changed.
(S): Resumes processing.

KEOS52576-E

An attempt to add a page has failed. (details = aa....aa)

aa....aa: Error details

Description: An attempt to add a page to the HCSC-Manager editor failed.
(S): Terminates the HCSC-Manager editor creation processing.
(O): Check the detailed error information.

KEOS52577-E

An attempt to display the HCSC-Manager view has failed. (details = aa....aa)

aa....aa: Error details

Description: An attempt to display the HCSC-Manager view failed.
(S): Terminates the HCSC-Manager view display processing.
(O): Check the detailed error information.

KEOS52578-W

Please log out from the HCSC-Manager perspective.

Description: the logout processing cannot be executed outside the HCSC-Manager perspective.
(S): Terminates the logout processing.
(O): Please log out from the HCSC-Manager perspective.

KEOS52579-I

The HCSC-Manager perspective will be expanded.

Description: The HCSC-Manager perspective will be set up as the current perspective.
(S): Resumes processing.

KEOS52580-W

The status of the execution environment does not match the status of the repository. Please make sure the environment is correct (type = aa....aa)

aa....aa: Type of inconsistent information

DeployFlag: Deployment status
ModifiedTime: Update time

Description

The statuses of the execution environment and repository do not match. Check and, if necessary, revise the environment.

(S)

Adjusts the deployment status in memory that is displayed in the HCSC-Manager view to that of the execution environment.

(O)

When the status is deployed in the execution environment and deployed in the repository:: Re-execute the csccompodeploy command.
When the status is deployed in the execution environment and deployed in the repository:: Execute the csccompoundeploy command specifying the -ignore option.
When the update date/time does not match:: Delete the component deployed in the execution environment by the csccompoundeploy command, and then execute the csccompodeploy command.

KEOS52701-I

The search will now start. (search condition (WHERE phrase) = aa....aa, sort condition (ORDER BY phrase) = [bb....bb], search range = [No.cc....cc-No.dd....dd])

aa....aa: Search condition

bb....bb: Sort condition

cc....cc: Search starting row

dd....dd: Search ending row

Description: The search will start with the conditions displayed in the message.
(S): Resumes the search processing.

KEOS52702-E

The specified date or time is invalid.

Description: The specified date or time is invalid.
(S): Terminates the search processing.
(O): The date/time specification is reversed (such as "from October 1 to August 1"). Enter the correct information.

KEOS52703-E

No status has been selected.

Description: The status has not been selected.
(S): Terminates the search processing.
(O): Select the status of the process instance to be searched.

KEOS52704-E

No condition has been entered.

Description

The condition has not been entered.

(S)

The search processing will end.

(O)

Enter the search conditions.

For searching a correlation set

Name of the correlation set definition

Correlation set value
For searching an identifier

Process instance identifier

KEOS52706-E

A search failed. (details = aa....aa)

aa....aa: Error details

Description: An attempt to search failed.
(S): Terminates the search processing.
(O): Check the detailed error information.

KEOS52707-I

The search was successful.

Description: The search was successful.
(S): Resumes processing.

KEOS52708-I

The search conditions for the aa....aa tab were reset.

aa....aa: Name of the selected tab

Description: The search conditions for the tab displayed in the message were reset.
(S): Resumes processing.

KEOS52709-I

The search conditions for the aa....aa tab will be reset.

aa....aa: Name of the selected tab

Description: The search conditions for the tab displayed in the message will be reset.
(S): Resumes processing.

KEOS52711-I

aa....aa will be acquired. (search condition (WHERE) = bb....bb, sort condition (ORDER BY) = [cc....cc], search range = [No.dd....dd-No.ee....ee])

aa....aa: Name of the selected details

bb....bb: Search condition

cc....cc: Sort condition

dd....dd: Search starting row

ee....ee: Search ending row

Description: The obtaining of the information will start with the conditions displayed in the message.
(S): Resumes processing.

KEOS52712-E

An attempt to acquire aa....aa has failed. (details = bb....bb)

aa....aa: Name of the selected details

bb....bb: Error details

Description: An attempt to obtain the information displayed in the message failed.
(S): Terminates the detailed information acquisition processing.
(O): Check the detailed error information.

KEOS52713-I

aa....aa was acquired successfully.

aa....aa: Name of the selected details

Description: The information displayed in the message was obtained successfully.
(S): Resumes processing.

KEOS52714-I

The value for the variable aa....aa was displayed.

aa....aa: Name of the selected variable definition

Description: The value of the variable displayed in the message was displayed.
(S): Resumes processing.

KEOS52715-I

In the dialog box, [OK] was selected.

Description: The user clicked the OK dialog box.
(S): Resumes processing.

KEOS52716-I

In the dialog box, [Cancel] was selected.

Description: The user clicked the Cancel dialog box.
(S): Resumes processing.

KEOS52717-I

Deletion of the execution logs for the selected process instance will now start. (deletion condition (WHERE) = [aa....aa])

aa....aa: Delete condition

Description: The deletion of the execution logs for the process instances will start with the conditions displayed in the message.
(S): Resumes processing.

KEOS52718-Q

The execution logs for the selected process instance will be deleted. Is this OK?

Description: This is a confirmation message for deleting the execution logs.
(S): Resumes processing.
(O): Click the OK button to delete and the Cancel button to not delete.

KEOS52719-Q

A process instance that is currently executing will be deleted. Are you sure you want to delete it?

Description: This is a confirmation message for deleting the execution logs for the selected process instances that include the "Running" status.
(S): Resumes processing.
(O): Click the OK button to delete and the Cancel button to not delete.

KEOS52720-I

The execution logs for [aa....aa] selected process instance(s) were deleted successfully. ([bb....bb] process instance(s) have already been deleted.)

aa....aa: Deletion count

bb....bb: Already deleted process instances

Description: The execution logs for the selected process instances were deleted successfully (also includes the execution logs of the process instances that have already been deleted).
(S): Resumes processing.

KEOS52721-E

An attempt to delete the execution logs for the selected process instance has failed. (details = aa....aa)

aa....aa: Error details

Description: An attempt to delete the execution logs for the selected process instance failed.
(S): Terminates the deletion processing.
(O): Check the detailed error information.

KEOS52722-I

The execution logs for [aa....aa] selected process instance(s) were deleted successfully.

aa....aa: Deletion count

Description: The execution logs for the selected process instances were deleted successfully.
(S): Resumes processing.

KEOS52723-I

The selected process instance will be executed again. (process instance ID = [aa....aa])

aa....aa: ID of the process instance to be re-executed

Description: The re-execution of the process instance whose ID is displayed in the message will start.
(S): Resumes processing.

KEOS52724-Q

The selected process instance will be executed again. Is this OK?

Description: This is a confirmation message for re-execution.
(S): Resumes processing.
(O): Click the OK button to re-execute and the Cancel button to not re-execute.

KEOS52726-E

An attempt to re-execute the selected process instance has failed. (details = aa....aa)

aa....aa: Error details

Description: An attempt to re-execute the selected process instance failed.
(S): Terminates the re-execution processing.
(O): Check the detailed error information.

KEOS52727-I

The selected process instance was re-executed successfully.

Description: The selected process instance was re-executed successfully.
(S): Resumes processing.

KEOS52728-I

The [aa....aa] button was selected.

aa....aa: Button name

Description: The button displayed in the message was clicked.
(S): Resumes processing.

KEOS52729-I

The [Display Next] button for the search results was selected.

Description: The user clicked the Display Next button for the search result.
(S): Resumes processing.

KEOS52730-I

The [Display Previous] button for the search results was selected.

Description: The user clicked the Display Previous button for the search result.
(S): Resumes processing.

KEOS52731-I

The [Display Next] button for the detailed information was selected.

Description: The user clicked the Display Next button for the details.
(S): Resumes processing.

KEOS52732-I

The [Display Previous] button for the detailed information was selected.

Description: The user clicked the Display Previous button for the details.
(S): Resumes processing.

KEOS52733-I

The check for invalid search conditions will now start.

Description: The check for invalid search conditions will start.
(S): Resumes processing.

KEOS52734-I

The check for invalid search conditions was executed successfully.

Description: The check for invalid search conditions was successful.
(S): Resumes processing.

KEOS52735-W

The selected process instance has already been deleted.

Description: The execution logs for the selected process instance have already been deleted.
(S): Resumes processing.
(O): Execute the search again.

KEOS52736-I

The database information will be acquired.

Description: The database information will be obtained.
(S): Resumes processing.

KEOS52737-I

The database information was acquired successfully. (UserID = aa....aa)

aa....aa: User ID

Description: The database information was obtained successfully.
(S): Resumes processing.

KEOS52738-I

The user-defined reception started successfully. (user-defined reception = aa....aa)

aa....aa: User-defined reception name

Description: The user-defined reception started successfully.
(S): Resumes processing.

KEOS52739-I

The user-defined reception stopped successfully. (user-defined reception = aa....aa)

aa....aa: User-defined reception name

Description: The user-defined reception stopped successfully.
(S): Resumes processing.

KEOS52740-E

An attempt to start the user-defined reception has failed. (user-defined reception = aa....aa, details = bb....bb)

aa....aa: User-defined reception name

bb....bb: Error details

Description: An attempt to start the user-defined reception failed.
(S): Terminates the user-defined reception start processing.
(O): Check the detailed error information.

KEOS52741-E

An attempt to stop the user-defined reception has failed. (user-defined reception = aa....aa, details = bb....bb)

aa....aa: User-defined reception name

bb....bb: Error details

Description: An attempt to stop the user-defined reception failed.
(S): Ends the processing to terminate the user-defined reception.
(O): Check the detailed error information.

KEOS52742-I

The results will be applied.

Description: The results will be applied.
(S): Resumes processing.

KEOS52743-I

The results have been applied.

Description: The results have been applied.
(S): Resumes processing.

KEOS52744-I

The [Start] button for the HCSC-Server was selected.

Description: The user clicked the Start button for the HCSC server.
(S): Resumes processing.

KEOS52745-I

The [Stop] button for the HCSC-Server was selected.

Description: The user clicked the Stop button for the HCSC server.
(S): Resumes processing.

KEOS52746-I

The [Start] button for the standard reception was selected.

Description: The user clicked the Start button for the standard reception.
(S): Resumes processing.

KEOS52747-I

The [Normal Stop] button for the standard reception was selected.

Description: The user clicked the Normal Termination button for the standard reception.
(S): Resumes processing.

KEOS52748-I

The [Planned Stop] button for the standard reception was selected.

Description: The user clicked the Planned Termination button for the standard reception.
(S): Resumes processing.

KEOS52749-I

The [Start] button for the linkage reception was selected.

Description: The user clicked the Start button for the linkage reception.
(S): Resumes processing.

KEOS52750-I

The [Normal Stop] button for the linkage reception was selected.

Description: The user clicked the Normal Termination button for the linkage reception.
(S): Resumes processing.

KEOS52751-I

The [Planned Stop] button for the linkage reception was selected.

Description: The user clicked the Planned Termination button for the linkage reception.
(S): Resumes processing.

KEOS52752-I

The [Start] button for linked inter-server was selected.

Description: The user clicked the Start button for the inter-server link.
(S): Resumes processing.

KEOS52753-I

The [Stop] button for linked inter-server was selected.

Description: The user clicked the Stop button for the inter-server link.
(S): Resumes processing.

KEOS52754-I

The [Start] button for the service adapter was selected.

Description: The user clicked the Start button for the service adapter.
(S): Resumes processing.

KEOS52755-I

The [Stop] button for the service adapter was selected.

Description: The user clicked the Stop button for the service adapter.
(S): Resumes processing.

KEOS52756-I

The [Start] button for the business process was selected.

Description: The user clicked the Start button for the business process.
(S): Resumes processing.

KEOS52757-I

The [Stop] button for the business process was selected.

Description: The user clicked the Stop button for the business process.
(S): Resumes processing.

KEOS52758-E

An attempt to execute a planned stop of the standard reception for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to execute a planned termination of the standard reception for the HCSC server failed.
(S): Ends the planned termination processing of the standard reception for the HCSC server.
(O): Check the detailed error information.

KEOS52759-E

An attempt to execute a planned stop of the linkage reception for the HCSC-Server has failed. (HCSC-Server = aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to execute a planned termination of the linkage reception for the HCSC server failed.
(S): Ends the planned termination processing of the linkage reception for the HCSC server.
(O): Check the detailed error information.

KEOS52760-I

The deletion confirmation dialog box will be displayed.

Description: The dialog box for confirming deletion will be displayed.
(S): Resumes processing.

KEOS52761-I

The re-execution confirmation dialog box will be displayed.

Description: The dialog box for confirming re-execution will be displayed.
(S): Resumes processing.

KEOS52762-I

The results will be modified.

Description: The results will be updated.
(S): Resumes processing.

KEOS52763-I

The results have been modified.

Description: The results are updated.
(S): Resumes processing.

KEOS52770-I

The displayed content of the HCSC-Manager view and editor will now be updated to the latest information.

Description: The displayed content of the HCSC-Manager view and editor will be updated to the latest information.
(S): Resumes processing.

KEOS52771-I

The refresh of the displayed content is complete.

Description: The displayed content is updated.
(S): Resumes processing.

KEOS52772-I

The [Start] button for the user-defined reception was selected.

Description: The user clicked the Start button for the user-defined reception.
(S): Resumes processing.

KEOS52773-I

The [Stop] button for the user-defined reception was selected.

Description: The user clicked the Stop button for the user-defined reception.
(S): Resumes processing.

KEOS52777-I

The in-process naming service information of the J2EE server will be acquired.

Description: The in-process naming service information of the J2EE server will be obtained.
(S): Resumes processing.

KEOS52778-I

The in-process naming service information of the J2EE server was acquired successfully.

Description: The in-process naming service information of the J2EE server was acquired successfully.
(S): Resumes processing.

KEOS52779-I

The [ON] button for resource information notification was selected.

Description: The user clicked the ON button for resource information notification.
(S): Sets the information notification functionality to ON.

KEOS52780-I

The [OFF] button for resource information notification was selected.

Description: The user clicked the OFF button for resource information notification.
(S): Sets the information notification functionality to OFF.

KEOS52781-I

The notification function for HCSC-Server resource information has been set to [ON].

Description: The information notification function is enabled.
(S): Resumes processing.

KEOS52782-I

The notification function for HCSC-Server resource information has been set to [OFF].

Description: The information notification function is disabled.
(S): Resumes processing.

KEOS52783-E

An error occurred while the resource information was being modified. (details = aa....aa)

aa....aa: Error details

Description: An error occurred while the resource information was being updated.
(S): Terminates processing.
(O): Check the detailed error information.

KEOS52784-W

The resource information page could not be displayed.

Description: The resource information page could not be displayed because an attempt to connect to Manager failed.
(S): Resumes processing.
(O): To display the resource information page, reference the error message that is output immediately before this message indicating a failure in establishing a connection, and then log in again after establishing the connection with Manager.

KEOS52800-E

An attempt to acquire the basic information of the HCSC-Server has failed. (HCSC-Server =aa....aa, details = bb....bb)

aa....aa: HCSC server name

bb....bb: Error details

Description: An attempt to obtain the basic information of the HCSC Server failed.
(S): Terminates acquisition processing of the basic information.
(O): Check the detailed error information.

KEOS52801-W

The user is logged out from HCSC-Manager. Please log in first, and then execute the operation.

Description: The operation cannot be executed because the user has logged out from HCSC-Manager.
(S): Terminates processing.

KEOS53500-I

The HCSC Easy Setup window will now open.

Description: The HCSC Easy Setup window will open.
(S): Resumes processing.

KEOS53501-I

The HCSC Easy Setup window will now close.

Description: The HCSC Easy Setup window will close.
(S): Terminates processing.

KEOS53502-E

The HCSC Easy Setup window cannot be used with aa....aa.

aa....aa: Product name of the Service Platform integrated format name

Description: the HCSC Easy Setup window cannot be used because the execution environment is invalid.
(S): Closes the HCSC Easy Setup screen.
(O): Execute the command when the Service Architect is installed.

KEOS53503-I

Setup of the HCSC Easy Setup functionality will now start.

Description: The setup of the HCSC Easy Setup functionality will start.
(S): Resumes processing.

KEOS53504-I

Setup of the HCSC Easy Setup functionality will now end.

Description: The setup of the HCSC Easy Setup functionality will end.
(S): Resumes processing.

KEOS53505-I

Unsetup of the HCSC Easy Setup functionality will now start.

Description: The removal of the setup of the HCSC Easy Setup functionality will start.
(S): Resumes processing.

KEOS53506-I

Unsetup of the HCSC Easy Setup functionality will now end.

Description: The removal of the setup of the HCSC Easy Setup functionality will end.
(S): Resumes processing.

KEOS53507-I

File copying will now start.

Description: The copying of the file will start.
(S): Resumes processing.

KEOS53508-I

File copying will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The copying of the file will be executed.
(S): Resumes processing.

KEOS53509-I

File copying will now end.

Description: The copying of the file will end.
(S): Resumes processing.

KEOS53510-I

File editing will now start.

Description: The editing of the file will start.
(S): Resumes processing.

KEOS53511-I

File editing will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The editing of the file will be executed.
(S): Resumes processing.

KEOS53512-I

File editing will now end.

Description: The editing of the file will end.
(S): Resumes processing.

KEOS53513-I

Building of the embedded database will now start.

Description: The setup of the embedded database will start.
(S): Resumes processing.

KEOS53514-I

Building of the embedded database will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of the embedded database will be executed.
(S): Resumes processing.

KEOS53515-I

Building of the embedded database will now end.

Description: The setup of the embedded database will end.
(S): Resumes processing.

KEOS53516-I

Building of Cosminexus Manager will now start.

Description: The setup of Manager will start.
(S): Resumes processing.

KEOS53517-I

Building of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of Manager will be executed.
(S): Resumes processing.

KEOS53518-I

Building of Cosminexus Manager will now end.

Description: The setup of Manager will end.
(S): Resumes processing.

KEOS53519-I

Cosminexus Manager will now start.

Description: Manager will start.
(S): Resumes processing.

KEOS53520-I

Startup of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of Manager will be executed.
(S): Resumes processing.

KEOS53521-I

Startup of Cosminexus Manager will now end.

Description: The startup of Manager will end.
(S): Resumes processing.

KEOS53522-I

Building of the logical server will now start.

Description: The setup of the logical server will start.
(S): Resumes processing.

KEOS53523-I

Building of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of the logical server will be executed.
(S): Resumes processing.

KEOS53524-I

Building of the logical server will now end.

Description: The setup of the logical server will end.
(S): Resumes processing.

KEOS53525-I

The logical server will now start.

Description: The logical server will start.
(S): Resumes processing.

KEOS53526-I

Startup of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of the logical server will be executed.
(S): Resumes processing.

KEOS53527-I

Startup of the logical server will now end.

Description: The startup of the logical server will end.
(S): Resumes processing.

KEOS53528-I

Building of the resource adapter will now start.

Description: The setup of the resource adapter will start.
(S): Resumes processing.

KEOS53529-I

Building of the resource adapter will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of the resource adapter will be executed.
(S): Resumes processing.

KEOS53530-I

Building of the resource adapter will now end.

Description: The setup of the resource adapter will end.
(S): Resumes processing.

KEOS53531-I

The resource adapter will now start.

Description: The resource adapter will start.
(S): Resumes processing.

KEOS53532-I

Startup of the resource adapter will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of the resource adapter will be executed.
(S): Resumes processing.

KEOS53533-I

Startup of the resource adapter will now end.

Description: The startup of the resource adapter will end.
(S): Resumes processing.

KEOS53534-I

Building of the application will now start.

Description: The setup of the application will start.
(S): Resumes processing.

KEOS53535-I

Building of the application will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of the application will be executed.
(S): Resumes processing.

KEOS53536-I

Building of the application will now end.

Description: The setup of the application will end.
(S): Resumes processing.

KEOS53537-I

The application will now start.

Description: The application will start.
(S): Resumes processing.

KEOS53538-I

Startup of the application will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The startup of the application will be executed.
(S): Resumes processing.

KEOS53539-I

Startup of the application will now end.

Description: The startup of the application will end.
(S): Resumes processing.

KEOS53540-I

Building of HCSC-Server will now start.

Description: The setup of the HCSC server will start.
(S): Resumes processing.

KEOS53541-I

Building of HCSC-Server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The setup of the HCSC server will be executed.
(S): Resumes processing.

KEOS53542-I

Building of HCSC-Server will now end.

Description: The setup of the HCSC server will end.
(S): Resumes processing.

KEOS53543-I

HCSC-Server will now stop.

Description: The stopping of the HCSC server will start.
(S): Resumes processing.

KEOS53544-I

Stopping of HCSC-Server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The stopping of the HCSC server will be executed.
(S): Resumes processing.

KEOS53545-I

Stopping of HCSC-Server will now end.

Description: The stopping of the HCSC server will end.
(S): Resumes processing.

KEOS53546-I

Stopping of the logical server will now start.

Description: The stopping of the logical server will start.
(S): Resumes processing.

KEOS53547-I

Stopping of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The stopping of the logical server will be executed.
(S): Resumes processing.

KEOS53548-I

Stopping of the logical server will now end.

Description: The stopping of the logical server will end.
(S): Resumes processing.

KEOS53549-I

Deletion of HCSC-Server will now start.

Description: The deletion of the HCSC server will start.
(S): Resumes processing.

KEOS53550-I

Deletion of HCSC-Server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The deletion of the HCSC server will be executed.
(S): Resumes processing.

KEOS53551-I

Deletion of HCSC-Server will now end.

Description: The deletion of the HCSC server will end.
(S): Resumes processing.

KEOS53552-I

Deletion of the logical server will now start.

Description: The deletion of the logical server will start.
(S): Resumes processing.

KEOS53553-I

Deletion of the logical server will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The deletion of the logical server will be executed.
(S): Resumes processing.

KEOS53554-I

Deletion of the logical server will now end.

Description: The deletion of the logical server will end.
(S): Resumes processing.

KEOS53555-I

Stopping of Cosminexus Manager will now start.

Description: The stopping of Manager will start.
(S): Resumes processing.

KEOS53556-I

Stopping of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The stopping of Manager will be executed.
(S): Resumes processing.

KEOS53557-I

Stopping of Cosminexus Manager will now end.

Description: The stopping of Manager will end.
(S): Resumes processing.

KEOS53558-I

Deletion of Cosminexus Manager will now start.

Description: The deletion of Manager will start.
(S): Resumes processing.

KEOS53559-I

Deletion of Cosminexus Manager will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The deletion of Manager will be executed.
(S): Resumes processing.

KEOS53560-I

Deletion of Cosminexus Manager will now end.

Description: The deletion of Manager will end.
(S): Resumes processing.

KEOS53561-I

Deletion of the embedded database will now start.

Description: The deletion of the embedded database will start.
(S): Resumes processing.

KEOS53562-I

Deletion of the embedded database will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The deletion of the embedded database will be executed.
(S): Resumes processing.

KEOS53563-I

Deletion of the embedded database will now end.

Description: The deletion of the embedded database will end.
(S): Resumes processing.

KEOS53564-E

An attempt to set up the HCSC Easy Setup functionality has failed.

Description: An attempt to set up the HCSC Easy Setup functionality failed.
(S): Terminates processing.
(O): After unset up, take appropriate action for the cause of the setup error, and then re-execute the setup.

KEOS53565-W

An attempt to unsetup of the HCSC Easy Setup functionality has failed.

Description: An attempt to remove the setup of the HCSC Easy Setup functionality failed.
(S): Terminates processing.
(O): Check the displayed message and decide whether it is necessary to take appropriate action for the cause of the error. Take appropriate action as needed.

KEOS53566-E

An attempt to copy a file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to copy a file failed.
(S): Resumes processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53567-E

An attempt to open the HCSC Easy Setup window failed because one is already open.

Description: An attempt to open the HCSC Easy Setup window failed because the HCSC Easy Setup window is already open.
(S): Terminates processing.
(O): Make sure that another user has not opened the HCSC Easy Setup window on the same computer.

KEOS53568-E

An attempt to build the embedded database has failed. (details = aa....aa)

aa....aa: Detailed information

Description

An attempt to set up the embedded database failed.

(S)

Terminates processing.

(O)

The possible causes are described below. Take appropriate action for the respective cause.

The HiRDB/SingleServer _CS0 service has not started.

Start the HiRDB/SingleServer _CS0 service.
Other

Check the displayed message and take appropriate action for the cause of the error.

KEOS53569-E

An attempt to build Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up Manager failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53570-E

An attempt to start Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start Manager failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53571-E

An attempt to build the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53572-E

An attempt to start the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start the logical server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53573-E

An attempt to build the resource adapter has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the resource adapter failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53574-E

An attempt to start the resource adapter has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start the resource adapter failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53575-E

An attempt to build the application has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the application failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53576-E

An attempt to start the application has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to start the application failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53577-E

An attempt to build HCSC-Server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to set up the HCSC server failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53578-W

An attempt to stop HCSC-Server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to stop the HCSC Server failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53579-W

An attempt to stop the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to stop the logical server failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53580-W

An attempt to delete HCSC-Server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the HCSC server failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53581-W

An attempt to delete the logical server has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the logical server failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53582-W

An attempt to stop Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to stop Manager failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53583-W

An attempt to delete Cosminexus Manager has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete Manager failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53584-W

An attempt to delete the embedded database has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to delete the embedded database failed.
(S): Resumes processing.
(O): Check the displayed message and decide whether it is necessary to take action for the cause of the error. Take the appropriate action as needed.

KEOS53585-E

wsdl4j.jar is not installed.

Description: The wsdl4j.jar file is not installed.
(S): Terminates processing.
(O): Execute the processing when wsdl4j.jar is installed in Cosminexus-installation-directory/c4web/lib directory.

KEOS53586-E

An attempt to specify the directory has failed.

Description: An attempt to specify the directory failed.
(S): Terminates processing.
(O): Click the Select button again. If the error cannot be corrected, contact the customer engineer.

KEOS53587-E

aa....aa is invalid.

aa....aa: Port number

Description: The specified port number is invalid.
(S): Terminates processing.
(O): Specify an integer from the range that can be specified.

KEOS53588-E

The specified port number is already being used. (label name = aa....aa, entered value = bb....bb)

aa....aa: Label name

bb....bb: Entered value

Description: The specified port number is already being used. Specify a different port number.
(S): Terminates processing.
(O): Check that the port number set in the Easy Setup window is not duplicated or is not used in the machine.

KEOS53589-I

Editing of the script file will now start.

Description: The editing of the script file will start.
(S): Resumes processing.

KEOS53590-E

An attempt to read a file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to read the file failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53591-E

An attempt to write a file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to write to a file failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53592-E

An attempt to edit a file has failed. (details = aa....aa)

aa....aa: Detailed information

Description: An attempt to edit a file failed.
(S): Terminates processing.
(O): Check the displayed message and take appropriate action for the cause of the error.

KEOS53593-I

Editing of the script file will now be executed. (details = aa....aa)

aa....aa: Detailed information

Description: The editing of the file will be executed.
(S): Resumes processing.

KEOS53594-I

Editing of the script file will now end.

Description: The editing of the file will end.
(S): Resumes processing.

KEOS53595-E

aa....aa is invalid.

aa....aa: Name

Description: The specified name is invalid.
(S): Terminates processing.
(O): Specify the characters within the valid range.

KEOS53699-E

An unexpected error occurred. (details = aa....aa)

aa....aa: Detailed information

Description: An unexpected error occurred.
(S): Terminates processing.
(O): Contact a customer engineer.