2.15 Messages from KDEK20000 to KDEK30999 : Messages

KDEK20000-I

The FTP Adapter started. (version = aa....aa, adapter name = bb....bb)

aa....aa: Information on the FTP adapter version

bb....bb: Adapter name

Description: The FTP adapter started.
(S): Processing continues.

KDEK20001-E

An attempt to start the FTP adapter has failed. (adapter name = aa....aa)

aa....aa: Adapter name

Description: An attempt to start the FTP adapter failed.
(S): The FTP adapter start processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK20002-E

An internal error occurred while the FTP adapter was starting. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Internal method name

cc....cc: Exception information

Description: An internal error occurred while the FTP adapter was being started.
(S): The FTP adapter start processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK20201-E

No execution environment properties files exist. (adapter name = aa....aa, file name = bb....bb)

aa....aa: Adapter name

bb....bb: Name of the FTP-adapter runtime-environment property file

Description: The FTP-adapter runtime-environment property file does not exist.
(S): The FTP adapter start processing is cancelled.
(O): Create the FTP-adapter runtime-environment property file in the development environment, and then restart the FTP adapter.

KDEK20202-E

The execution environment properties file cannot be accessed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the FTP-adapter runtime-environment property file

cc....cc: Exception information

Description: The FTP-adapter runtime-environment property file cannot be accessed.
(S): The FTP adapter start processing is cancelled.
(O): Set up the appropriate access permissions so that the FTP adapter can access the FTP-adapter runtime-environment property file. Take the appropriate action and then, restart the FTP adapter.

KDEK20203-E

An attempt to read the execution environment properties file failed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the FTP-adapter runtime-environment property file

cc....cc: Exception information

Description: An attempt to read the FTP-adapter runtime-environment property file failed.
(S): The FTP adapter start processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK20204-W

An attempt to close the execution environment properties file failed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the FTP-adapter runtime-environment property file

cc....cc: Exception information

Description: An attempt to close the FTP-adapter runtime-environment property file failed.
(S): Processing continues.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK20205-E

The property shown for the key name in the execution environment properties file does not exist. (adapter name = aa....aa, file name = bb....bb, key name = cc....cc)

aa....aa: Service ID

bb....bb: Name of the runtime-environment property file

cc....cc: Key name

Description: The property shown for the key name in the runtime-environment property file does not exist.
(S): Cancels the processing.
(O): Modify the runtime-environment property file, and then restart the FTP adapter.

KDEK20206-E

One or more property values specified in the execution environment property file are invalid. (adapter name = aa....aa, file name = bb....bb, key name = cc....cc, specified value = dd....dd)

aa....aa: Service ID

bb....bb: Name of the runtime-environment property file

cc....cc: Key name

dd....dd: Specified value

Description: A property value specified in the runtime-environment property file is invalid.
(S): Cancels the processing.
(O): Check the format and specifiable values for the invalid key values, and their magnitude correlation with the related key values in 6.8.3 FTP-adapter runtime-environment property file in the Service Platform Reference Guide. Modify the runtime-environment property file, and then restart the SFTP adapter.

KDEK20208-E

No definition files exist. (adapter name = aa....aa, file name = bb....bb)

aa....aa: Adapter name

bb....bb: Path of the definition file

Description: The definition file does not exist.
(S): The FTP adapter start processing is cancelled.
(O): Make sure that the definition file path of the FTP-adapter runtime-environment property file or the file itself exists. Take the appropriate action and then, restart the FTP adapter.

KDEK20209-E

The definition file cannot be accessed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Exception information

Description: The definition file cannot be accessed.
(S): The FTP adapter start processing is cancelled.
(O): Set up the appropriate access permissions so that the definition file can be accessed. Take the appropriate action and then, restart the FTP adapter.

KDEK20210-E

An attempt to read the definition file failed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Exception information

Description: An attempt to read the definition file failed.
(S): The FTP adapter start processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK20211-W

An attempt to close the definition file failed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Exception information

Description: An attempt to close the definition file failed.
(S): Processing continues.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK20212-E

The property shown for the key name in the definition file does not exist. (adapter name = aa....aa, file name = bb....bb, key name = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Key name

Description

The property indicated in the key name does not exist in the definition file.

(S)

The FTP adapter start processing, or request message parsing is cancelled.

(O)

Correct the definition file, and then restart the FTP adapter.

If there is an error in the FTP adapter account definition file, register the user with the csaftpuseradd command, and then restart the FTP adapter.

KDEK20213-E

One or more property values specified in the definition file are invalid. (adapter name = aa....aa, file name = bb....bb, key name = cc....cc, specified value = dd....dd)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Key name

dd....dd: Specified value

Description: A property specified in the definition file is invalid.
(S): The FTP adapter start processing is cancelled.
(O): Correct the definition file, and then restart the FTP adapter.

KDEK20215-E

The password specified for the definition file cannot be decoded. (adapter name = aa....aa, definition file path = bb....bb, key name = cc....cc, specified value = dd....dd)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Key name

dd....dd: Specified value

Description: The password specified for the definition file cannot be changed. An invalid string is specified for the password of the corresponding user in the FTP adapter account definition file.
(S): The FTP adapter start processing is cancelled.
(O): Reset the password with the csaftpuseradd -r command, and then restart the FTP adapter.

KDEK20216-E

One or more properties specified in the execution environment property file are invalid. (adapter name = aa....aa, file name = bb....bb, key name = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the definition file

cc....cc: Key name

Description

A property specified in the runtime environment property file is invalid.

The property indicated in the key name cannot be specified.

(S)

The FTP adapter start processing is cancelled.

(O)

Correct the definition file, and then restart the FTP adapter.

KDEK20217-E

User account information is not defined. (adapter name = aa....aa)

aa....aa: Service ID

Description

User account information is not defined.

(S)

Cancels the FTP adapter start processing.

(O)

Perform one of the following, and then restart the FTP adapter:

Register user information by using the csaftpuseradd command with the -name option specified.
Register user information by using the csaftpuseradd command with the -f option specified. Then, set the account definition file path (specified by the -f option) for the ftpadp.account-inf-filepath property of the FTP-adapter runtime-environment property file or FTP-adapter common- runtime-environment property file.

KDEK20900-E

The message log file was not found.

Description: The message log file was not found.
(S): The FTP adapter start processing is cancelled.
(O): Contact maintenance personnel.

KDEK20901-E

An attempt to initialize the message log has failed. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Method name

cc....cc: Exception information

Description: An attempt to initialize the message log failed.
(S): Complies with the message that is output next.
(O): Contact maintenance personnel.

KDEK20902-W

An attempt to initialize the method trace has failed. (adapter name = aa....aa, prefix string of output file = bb....bb, number of output files = cc....cc, size of output files = dd....dd, error message = ee....ee)

aa....aa: Adapter name

bb....bb: Parameter used for initialization (<Output destination directory>\cscftpadpmtd_<HCSC server name>_)

cc....cc: Parameter used for initialization (number of output files)

dd....dd: Parameter used for initialization (size of output file)

ee....ee: Error message

Description: An attempt to initialize the method trace failed.
(S): Complies with the message that is output next.
(O): If the cause of the error is an invalid parameter, correct the FTP-adapter runtime-environment property file, and then restart the FTP adapter. If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEK20903-W

The default value of the method trace output path will be used. (adapter name = aa....aa, default value = bb....bb)

aa....aa: Adapter name

bb....bb: Default value

Description: The default value will be assumed for the method trace output path.
(S): The trace is output to the default output destination and processing continues.
(O): Make sure that the method trace output path specified in the FTP-adapter runtime-environment property file exists, or see the messages displayed before this message, and eliminate the cause of the error.

KDEK20904-E

Trace information cannot be output because the default method trace output location could not be acquired. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The method trace cannot be output because the default method trace output destination could not be obtained.
(S): The FTP adapter start processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK20905-W

An attempt to initialize the FTP protocol trace has failed. (adapter name = aa....aa, prefix string of output file = bb....bb, number of output files = cc....cc, size of output files = dd....dd, error message = ee....ee)

aa....aa: Adapter name

bb....bb: Parameter used for initialization (<Output destination directory>\ftpprotocoltrace_)

cc....cc: Parameter used for initialization (number of output files)

dd....dd: Parameter used for initialization (size of output file)

ee....ee: Error message

Description: An attempt to initialize the FTP protocol trace failed.
(S): Complies with the message that is output next.
(O): If the cause of the error is an invalid parameter, correct the FTP-adapter runtime-environment property file, and then restart the FTP adapter. If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEK20907-E

Trace information cannot be output because the default FTP protocol trace output location could not be acquired. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The trace cannot be output because the default FTP protocol trace output destination cannot be obtained.
(S): The FTP adapter start processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK20908-W

An attempt to initialize the stack trace has failed. (adapter name = aa....aa, prefix string of output file = bb....bb, number of output files = cc....cc, size of output files = dd....dd, error message = ee....ee)

aa....aa: Adapter name

bb....bb: Parameter used for initialization (<Output destination directory>\cscftpadpexp_<HCSC server name>_)

cc....cc: Parameter used for initialization (number of output files)

dd....dd: Parameter used for initialization (size of output file)

ee....ee: Error message

Description: An attempt to initialize the exception log failed.
(S): Complies with the message that is output next.
(O): If the cause of the error is an invalid parameter, correct the FTP-adapter runtime-environment property file, and then restart the FTP adapter. If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEK20909-W

The default value of the stack trace output path will be used. (adapter name = aa....aa, default value = bb....bb)

aa....aa: Adapter name

bb....bb: Default value

Description: The default value will be assumed for the exception log output path.
(S): The trace is output to the default output destination and processing continues.
(O): Make sure that the trace output path specified in the FTP-adapter runtime-environment property file exists, or see the messages displayed before this message, and eliminate the cause of the error.

KDEK20910-E

Trace information cannot be output because the default stack trace output location could not be acquired. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The trace cannot be output because the default exception log output destination cannot be obtained.
(S): The FTP adapter start processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK21000-I

The FTP Adapter stopped. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The FTP adapter stopped.
(S): The FTP adapter stopped.

KDEK21001-W

An internal error occurred while the FTP adapter was stopping. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Internal method name

cc....cc: Exception information

Description: An internal error occurred while the FTP adapter was being stopped.
(S): The FTP adapter stop processing continues.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK21900-W

An attempt to end the method trace has failed. (adapter name = aa....aa, method name = bb....bb, error message = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the method where the error occurred

cc....cc: Error message

Description

An attempt to end the method trace failed.

(S)

The end processing continues.

(O)

Check whether the cause of the error is associated with operations.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEK21901-W

An attempt to end the stack trace has failed. (adapter name = aa....aa, method name = bb....bb, error message = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the method where the error occurred

cc....cc: Error message

Description

An attempt to end the exception log failed.

(S)

The end processing continues.

(O)

Check whether the cause of the error is associated with operations.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEK30000-E

An unsupported operation was specified. (adapter name = aa....aa, operation name = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: An unsupported operation was specified.
(S): Processing is cancelled.
(O): Specify an operation that is supported by the FTP adapter, and then re-execute the invoke service request.

KDEK30001-E

An unsupported message format was specified. (adapter name = aa....aa, operation name = bb....bb, message type = cc....cc, message format = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Message type

REQUEST: Request message
RESPONSE: Response message

dd....dd: Message format

UNKNOWN: Unknown
BINARY: Binary message

Description: An unsupported message format was specified.
(S): Processing is cancelled.
(O): Specify a message format (XML) that is supported by the FTP adapter, and then re-execute the invoke service request.

KDEK30202-E

An attempt to acquire a request message has failed. (adapter name = aa....aa, operation name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to obtain a request message failed.
(S): Processing is cancelled.
(O): Save the exception information, and then contact maintenance personnel.

KDEK30203-E

No tags necessary for the request message exist. (adapter name = aa....aa, operation name = bb....bb, tag name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Tag name

Description: The tags required for the request message do not exist.
(S): Processing is cancelled.
(O): On the basis of the exception information, review and, if necessary, revise the syntax of the XML file to be read, and then re-execute the invoke service request. If the information corresponding to the tag name exists in the FTP-adapter runtime-environment property file, review and, if necessary, revise the property value, and then re-execute the invoke service request.

KDEK30204-E

An XML request message is invalid. (adapter name = aa....aa, operation name = bb....bb, error cause = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Cause

Description: An XML request message is invalid.
(S): Processing is cancelled.
(O): Check the XML request message to see the cause information. Correct the request message, and then re-execute the invoke service request.

KDEK30205-E

No common attribute exists in the local-folder tag for the request message. (adapter name = aa....aa, operation name = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: The common attribute does not exist in the local-folder tag for the request message.
(S): Processing is cancelled.
(O): Check whether the common attribute exists in the local-folder tag for the request message.

KDEK30206-E

The common attribute in the local-folder tag for the request message is invalid. (adapter name = aa....aa, operation name = bb....bb, specified value = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Specified value

Description: The common attribute in the local-folder tag for the request message is invalid.
(S): Processing is cancelled.
(O): Check whether the "common" attribute in the local-folder tag for the request message is "true" or "false".

KDEK30207-E

One or more tags specified in the request message are invalid. (adapter name = aa....aa, operation name = bb....bb, tag name = cc....cc, specified value = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Tag name

dd....dd: Specified value

Description: The tag value specified in the request message is invalid.
(S): Processing is cancelled.
(O): On the basis of the exception information, review and, if necessary, revise the syntax of the XML file to be read, and then re-execute the invoke service request.

KDEK30400-E

An internal error occurred during FTP processing. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Internal method name

cc....cc: Exception information

Description: An internal error occurred during FTP processing.
(S): Processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30401-E

An attempt to transfer a file specified in the FTP adapter request message has failed. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc, command name = dd....dd, reply code = ee....ee, command message = ff....ff)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File name

dd....dd: FTP command name

ee....ee: Reply code

ff....ff: Command message

Description: An attempt to transmit a file specified in the FTP adapter request message failed.
(S): Processing is cancelled.
(O): Check the reply code and command message, and then eliminate the cause of the error.

KDEK30402-E

The FTP command failed. (adapter name = aa....aa, operation name = bb....bb, command name = cc....cc, reply code = dd....dd, command message = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command name

dd....dd: Reply code

ee....ee: Command message

Description: The FTP command failed.
(S): Processing is cancelled.
(O): Check the reply code and command message, and then eliminate the cause of the error.

KDEK30403-E

An attempt to save a response message has failed. (adapter name = aa....aa, operation name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to save a response message failed.
(S): Processing is cancelled.
(O): Save the exception information, and then contact maintenance personnel.

KDEK30404-E

An error occurred during FTP processing. (adapter name = aa....aa, operation name = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: An error occurred during an FTP processing.
(S): Processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK30405-E

An internal error occurred during FTP processing. (adapter name = aa....aa, operation name = bb....bb, method name = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Internal method name

dd....dd: Exception information

Description: An internal error occurred during the FTP adapter processing.
(S): Processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30406-E

Asynchronous communication is not supported. (adapter name = aa....aa, operation name = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: An Asynchronous communication is not supported.
(S): Processing is cancelled.
(O): Set the communication model for the operation information settings of the FTP adapter definitions in the development environment to synchronous, and then re-package the FTP adapter.

KDEK30407-E

An attempt to connect to Control connection has failed. (adapter name = aa....aa, Client IP = bb....bb, Client Port = cc....cc, Host IP = dd....dd, Host Port = ee....ee)

aa....aa: Adapter name

bb....bb: IP address of the client

cc....cc: Client port number

dd....dd: Host IP address, or host name

ee....ee: Host port number

Description

An attempt to connect to a control connection failed.

(S)

Processing is cancelled.

(O)

Check the following:

There is no error in the host name, IP address, or port number of the FTP server.
There is no error in the IP address or port number of the FTP client.
The FTP server is running.
The network is connected correctly.
The FTP server port number is not the Implicit mode port for FTPS.

KDEK30408-W

An attempt to connect to Control connection has failed. The operation will be re-attempted. (adapter name = aa....aa, Client IP = bb....bb, Client Port = cc....cc, Host IP = dd....dd, Host Port = ee....ee)

aa....aa: Adapter name

bb....bb: IP address of the client

cc....cc: Client port number

dd....dd: Host IP address, or host name

ee....ee: Host port number

Description: An attempt to connect to a control connection failed. The operation will be re-attempted.
(S): The operation is re-attempted.

KDEK30409-E

An attempt to connect to Data connection has failed. (adapter name = aa....aa, Client IP = bb....bb, Client Port = cc....cc, Host IP = dd....dd, Host Port = ee....ee)

aa....aa: Adapter name

bb....bb: IP address of the client

cc....cc: Client port number

dd....dd: Host IP address, or host name

ee....ee: Host port number (If the information cannot be acquired, - is displayed.)

Description

An attempt to connect to a data connection failed.

(S)

Processing is cancelled.

(O)

Check the following:

There is no error in the host name, IP address, or port number of the FTP server.
There is no error in the IP address or port number of the FTP client.
The FTP server is running.
The network is connected correctly.

KDEK30410-W

An attempt to connect to Data connection has failed. The operation will be re-attempted. (adapter name = aa....aa, Client IP = bb....bb, Client Port = cc....cc, Host IP = dd....dd, Host Port = ee....ee)

aa....aa: Adapter name

bb....bb: IP address of the client

cc....cc: Client port number

dd....dd: Host IP address, or host name

ee....ee: Host port number (If the information cannot be acquired, - is displayed.)

Description: An attempt to connect to a data connection failed. The operation will be re-attempted.
(S): The operation is re-attempted.

KDEK30411-E

An attempt to exclude a file has failed. (adapter name = aa....aa, file name = bb....bb)

aa....aa: Adapter name

bb....bb: File name

Description: An attempt to exclude a file has failed.
(S): Processing is cancelled.
(O): The file to be transmitted is being used for another processing. Wait for the processing to end, and then re-execute the processing.

KDEK30412-E

The FTP command was refused. (adapter name = aa....aa, operation name = bb....bb, command = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command

Description: The FTP command was refused.
(S): Processing is cancelled.
(O): Make sure that the FTP command specified in the request message is permitted by the FTP command authorization list definition.

KDEK30413-E

The SITE command was refused. (adapter name = aa....aa, operation name = bb....bb, The first argument of SITE command = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: First argument of the SITE command

Description: The SITE command was refused.
(S): Processing is cancelled.
(O): Make sure that the command to be executed by the SITE command specified in the request message is permitted by the FTP command authorization list definition.

KDEK30414-E

An attempt to close the transfer file failed. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Transmission file name

Description: An attempt to close the transmission file failed.
(S): Processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30415-E

The local folder specified in the request message does not exist. (adapter name = aa....aa, operation name = bb....bb, local folder = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Local folder

Description: The local folder specified in the request message does not exist.
(S): Processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30416-E

A timeout occurred during a file transfer. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Transmission file name

Description

A timeout occurred during a file transmission.

(S)

Processing is cancelled.

(O)

Check the following:

The timeout value for transmitting or obtaining the FTP-adapter runtime-environment property file is adequate.
The FTP server is running.

KDEK30417-E

A timeout occurred for an FTP command. (adapter name = aa....aa, operation name = bb....bb, command = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command

Description: A timeout occurred for an FTP command.
(S): Processing is cancelled.
(O): Check the contents of the FTP command specified in the request message, and make sure that the FTP server is running.

KDEK30418-E

A listen-timeout occurred during connection to the data connection. (adapter name = aa....aa, operation name = bb....bb, Client IP = cc....cc, Client Port = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: IP address of the client

dd....dd: Client port number

Description

A Listen timeout occurred in the connection with the data connection.

(S)

Processing is cancelled.

(O)

Check the following:

There is no error in the client IP address and port number.
The Listen timeout value is adequate.
The FTP server is running.
The network is connected correctly.

KDEK30420-E

The file sizes do not match. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File name

Description: The file sizes do not match.
(S): Processing is cancelled.
(O): Check the other messages to verify if there are other errors.

KDEK30421-W

Deletion of the transfer file failed. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Transmission file name

Description: An attempt to delete a transmission file failed.
(S): Processing continues.

KDEK30422-E

The local file specified in the request message does not exist. (adapter name = aa....aa, operation name = bb....bb, file path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File path

Description: The local file specified in the request message does not exist.
(S): Processing is cancelled.
(O): Make sure that the local folder and file specified in the request message exist. If a folder having the same name as the file name exists, check and, if necessary, revise the input file specified in the request message.

KDEK30423-E

An I/O error occurred during communication with the FTP server. (adapter name = aa....aa, operation name = bb....bb, Host IP = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Host IP address, or host name

dd....dd: Exception information

Description

An I/O error occurred during the communication with the FTP server.

(S)

Processing is cancelled.

(O)

Check the following:

The FTP server is running.
The network is connected correctly.
There are no other errors (check the other message log and FTP protocol trace).
The protocol used with FTPS is enabled in the FTP server settings if this error occurs when FTPS is used for connecting to the FTP server.

KDEK30424-E

An I/O error occurred during a file access. (adapter name = aa....aa, operation name = bb....bb, file path = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File path

dd....dd: Exception information

Description: An I/O error occurred during a file access.
(S): Processing is cancelled.
(O): Make sure that the file exists, or that the access permissions have been assigned to the connected users.

KDEK30425-E

An attempt to connect to an FTPS Control connection has failed. (adapter name = aa....aa, Client IP = bb....bb, Client Port = cc....cc, Host IP = dd....dd, Host Port = ee....ee, exception information = ff....ff)

aa....aa: Adapter name

bb....bb: IP address of the client

cc....cc: Client port number

dd....dd: Host IP address

ee....ee: Host port number

ff....ff: Exception information

Description

An attempt to connect to an FTPS control connection failed.

(S)

Processing is cancelled.

(O)

When the Implicit mode is used for connection, make sure that the destination FTP server port is an FTPS port in the Implicit mode.

Make sure that the protocol to be used with FTPS is enabled in the FTP server settings.

If the destination FTP server performs client authentication, specify settings so that client authentication is not performed in the destination FTP server. For details on the settings in the destination FTP server, see the documentation for the destination FTP server.

KDEK30426-E

The FTP command for FTPS failed. (adapter name = aa....aa, operation name = bb....bb, command name = cc....cc, reply code = dd....dd, command message = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command name

dd....dd: Reply code

ee....ee: Command message

Description

The FTP command for FTPS failed.

(S)

Processing is cancelled.

(O)

Check the reply code and command message, and then eliminate the cause of the error.

Make sure that the destination FTP server supports FTPS.

KDEK30427-E

The client and server could not negotiate the desired level of security. (adapter name = aa....aa, operation name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description

The client and the server could not negotiate the desired level of security.

(S)

Processing is cancelled.

(O)

Check the following. For details on the trust store settings, see "Appendix H.1 Secure connection using FTPS (FTP adapter)" in "Service Platform Reception and Adapter Definition Guide".

The protocol to be used with FTPS is enabled in the FTP server settings.
The path for the trust store is correct.
The password for the trust store is correct.
The trust store files are not damaged.

If the destination FTP server certificate is not imported into the trust store when you perform server authentication, execute one of the following operations:

If you can trust the destination FTP server, import the destination FTP server certificate into the trust store.
If you are certain that the destination FTP server can be trusted, execute the FTP adapter with settings so that the server is not authenticated. For details on the server authentication settings, see the specifications for the FTP adapter request message, and the specifications for the FTP-adapter runtime-environment property file.

KDEK30428-E

Analysis of an FTP reply message has failed. (adapter name = aa....aa, operation name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to parse an FTP reply message failed.
(S): Processing is cancelled.
(O): Make sure that the destination port is not an FTP server port or an FTPS port in the Implicit mode.

KDEK30432-E

Acquisition of information specified in the FTP adapter request message has failed. (adapter name = aa....aa, operation name = bb....bb, command name = cc....cc, option = dd....dd, path = ee....ee, reply code = ff....ff, command message = gg....gg)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command name

dd....dd: Option

ee....ee: Path

ff....ff: Reply code

gg....gg: Command message

Description: An attempt to obtain the information specified in the FTP adapter request message failed.
(S): Processing is cancelled.
(O): Check the reply code and command message, and then eliminate the cause of the error.

KDEK30433-E

An attempt to close an intermediary file failed. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File name

Description: An attempt to close an intermediate file failed.
(S): Processing is cancelled.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30434-E

A timeout occurred during information acquisition. (adapter name = aa....aa, operation name = bb....bb, command name = cc....cc, option = dd....dd, path = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: FTP command name

dd....dd: Option

ee....ee: Path

Description: A timeout occurred while information was being obtained.
(S): Processing is cancelled.
(O): Make sure that the data collection timeout period for the FTP-adapter runtime-environment property file is adequate and that the FTP server is running.

KDEK30435-W

Deletion of an intermediary file failed. (adapter name = aa....aa, operation name = bb....bb, file name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File name

Description: An attempt to delete an intermediate file failed.
(S): Processing continues.

KDEK30501-I

csaftpuseradd will now start.

Description: The csaftpuseradd command will start.
(S): Processing continues.

KDEK30502-I

csaftpuserdel will now start.

Description: The csaftpuserdel command will start.
(S): Processing continues.

KDEK30503-I

csaftpuserls will now start.

Description: The csaftpuserls command will start.
(S): Processing continues.

KDEK30511-I

The user account will now be registered. (user name = aa....aa)

aa....aa: User name

Description: The user account will be registered.
(S): Processing continues.

KDEK30512-I

The user account has been registered. (user name = aa....aa)

aa....aa: User name

Description: The user account has been registered.
(S): Processing continues.

KDEK30513-I

The user account will now be updated. (user name = aa....aa)

aa....aa: User name

Description: The user account will be updated.
(S): Processing continues.

KDEK30514-I

The user account has been updated. (user name = aa....aa)

aa....aa: User name

Description: The user account has been updated.
(S): Processing continues.

KDEK30515-I

The user account will now be deleted. (user name = aa....aa)

aa....aa: User name

Description: The user account will be deleted.
(S): Processing continues.

KDEK30516-I

The user account has been deleted. (user name = aa....aa)

aa....aa: User name

Description: The user account has been deleted.
(S): Processing continues.

KDEK30517-I

The user account will now be registered. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account will be registered.
(S): Processing continues.

KDEK30518-I

The user account has been registered. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account has been registered.
(S): Processing continues.

KDEK30519-I

The user account will now be updated. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account will be updated.
(S): Processing continues.

KDEK30520-I

The user account has been updated. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account has been updated.
(S): Processing continues.

KDEK30521-I

The user account will now be deleted. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account will be deleted.
(S): Processing continues.

KDEK30522-I

The user account has been deleted. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: The user account has been deleted.
(S): Processing continues.

KDEK30531-I

csaftpuseradd ended normally.

Description: The csaftpuseradd command ended normally.
(S): Processing ends.

KDEK30532-I

csaftpuserdel ended normally.

Description: The csaftpuserdel command ended normally.
(S): Processing ends.

KDEK30533-I

csaftpuserls ended normally.

Description: The csaftpuserls command ended normally.
(S): Processing ends.

KDEK30541-I

Usage:

csaftpuseradd [-h] -user <UserID> -pass <Password> [-account <Account>] [-r] { -f <Account File Path> | -name <ServiceID> }

Description: This message describes the usage of the csaftpuseradd command.
(S): Processing continues.
(O): See the message to check the usage of the command.

KDEK30542-I

Usage:

csaftpuserdel [-h] -user <UserID> { -f <Account File Path> | -name <ServiceID> }

Description: This message describes the usage of the csaftpuserdel command.
(S): Processing continues.
(O): See the message to check the usage of the command.

KDEK30543-I

Usage:

csaftpuserls [-h] { -f <Account File Path> | -name <ServiceID> }

Description: This message describes the usage of the csaftpuserls command.
(S): Processing continues.
(O): See the message to check the usage of the command.

KDEK30551-E

The command argument syntax is invalid. (command argument = aa....aa)

aa....aa: Invalid argument

Description: The command argument syntax is invalid.
(S): Processing ends.
(O): Review and, if necessary, revise the command argument.

KDEK30552-E

An update of the account definition file failed because the file was being updated by another command that was executed at the same time.

Description: An update of the FTP adapter account definition file failed because the file is being updated by another command that was executed at the same time.
(S): Processing ends.
(O): Check the contents of the current FTP adapter account definition file with the csaftpuserls command, and re-execute the csaftpuseradd command or csaftpuserdel command as and when required.

KDEK30553-E

A memory shortage occurred.

Description: A memory shortage occurred.
(S): Processing ends.
(O): Increase the available memory, and then re-execute the processing.

KDEK30554-E

An unexpected exception occurred. (details = aa....aa)

aa....aa: Details

Description: An unexpected error occurred.
(S): Processing ends.
(O): Contact maintenance personnel.

KDEK30555-E

An attempt to access the account definition file failed. (details = aa....aa)

aa....aa: Details

Description: An attempt to access the FTP adapter account definition file failed.
(S): Processing ends.
(O): Eliminate the cause of the error on the basis of the details, and then re-execute the processing.

KDEK30557-E

An attempt was made to register account information that already exists. (user name = aa....aa)

aa....aa: User name

Description: An attempt was made to register the account information that already exists.
(S): Processing ends.
(O): Check the contents of the FTP adapter account definition file with the csaftpuserls command, specify the correct user name, and then re-execute the command.

KDEK30558-E

An attempt was made to update account information that does not exist. (user name = aa....aa)

aa....aa: User name

Description: An attempt was made to update the account information that does not exist.
(S): Processing ends.
(O): Check the contents of the FTP adapter account definition file with the csaftpuserls command, specify the correct user name, and then re-execute the command.

KDEK30559-E

An attempt was made to delete account information that does not exist. (user name = aa....aa)

aa....aa: User name

Description: An attempt was made to delete the account information that does not exist.
(S): Processing ends.
(O): Check the contents of the FTP adapter account definition file with the csaftpuserls command, specify the correct user name, and then re-execute the command.

KDEK30571-E

csaftpuseradd ended abnormally.

Description: The csaftpuseradd command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KDEK30572-E

csaftpuserdel ended abnormally.

Description: The csaftpuserdel command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KDEK30573-E

csaftpuserls ended abnormally.

Description: The csaftpuserls command ended abnormally.
(S): Processing ends.
(O): See the error message that was displayed just before this message.

KDEK30574-E

An attempt was made to register account information that already exists. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: An attempt was made to register account information that already exists.
(S): Processing ends.
(O): Check the contents of the account definition file by using the csaftpuserls command, specify the correct service ID and user name, and then re-execute the command.

KDEK30575-E

An attempt was made to update account information that does not exist. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: An attempt was made to update account information that does not exist.
(S): Processing ends.
(O): Check the contents of the account definition file by using the csaftpuserls command, specify the correct service ID and user name, and then re-execute the command.

KDEK30576-E

An attempt was made to delete account information that does not exist. (service ID = aa....aa, user name = bb....bb)

aa....aa: Service ID

bb....bb: User name

Description: An attempt was made to delete account information that does not exist.
(S): Processing ends.
(O): Check the contents of the account definition file by using the csaftpuserls command, specify the correct service ID and user name, and then re-execute the command.

KDEK30601-W

An attempt to initialize the message log has failed. (prefix string of output file = aa....aa, method name = bb....bb, error cause = cc....cc)

aa....aa: Parameter used for initialization (<Output destination directory>\message)

bb....bb: Method name in the Trace Common library

cc....cc: Detailed message of the Trace Common library

Description

An attempt to initialize the message log failed.

(S)

Complies with the message that is output next.

(O)

Eliminate the cause of the error on the basis of the detailed message.

If the detailed message is null, check the following and eliminate the cause of the error:

The path of the message log output destination directory is specified as an absolute path.
A file can be created in the path of the message log output destination directory.

KDEK30602-W

The default value will be used for the message log output path. (default value = aa....aa)

aa....aa: Default value

Description: The default value will be assumed for the message log output path.
(S): The trace is output to the default output destination and processing continues.
(O): Make sure that the message log output path specified in the FTP adapter command definition file exists, or see the messages displayed before this message, and eliminate the cause of the error.

KDEK30603-E

Log information cannot be output because an attempt to initialize the message log has failed.

Description: The log information cannot be output because the message log could not be initialized.
(S): The collection of the message log is cancelled, and processing is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEK30604-W

An error occurred while outputting information to the message log. (method name = aa....aa, error cause = bb....bb)

aa....aa: Method name in the Trace Common library

bb....bb: Detailed message of the Trace Common library

Description: An error occurred during the output of the message log.
(S): The collection of the message log is cancelled and processing continues.
(O): Eliminate the cause of the error on the basis of the detailed message.

KDEK30605-W

aa....aa

aa....aa: Stack trace information

Description

This message is the stack trace information for the errors that occur in the processing of the FTP adapter commands.

(S)

Processing is interrupted.

(O)

See the error message displayed just before this message, and then eliminate the cause of the error.

If the cause of the error is associated with operations, re-execute the processing.

If the cause of the error is not associated with operations, collect the log, and then contact maintenance personnel.

KDEK30606-E

The definition file cannot be accessed. (file name = aa....aa, exception information = bb....bb)

aa....aa: Path of the definition file

bb....bb: Exception information

Description: The FTP adapter command definition file cannot be accessed.
(S): Processing ends.
(O): Set up the appropriate permissions so that the definition file can be accessed. After you set up the permissions, re-execute the command.

KDEK30607-E

An attempt to read the definition file has failed. (file name = aa....aa, exception information = bb....bb)

aa....aa: Path of the definition file

bb....bb: Exception information

Description: An attempt to read the FTP adapter command definition file failed.
(S): Processing ends.
(O): Eliminate the cause of the error on the basis of the exception information.

KDEK30608-W

An attempt to close the definition file has failed. (file name = aa....aa, exception information = bb....bb)

aa....aa: Path of the definition file

bb....bb: Exception information

Description: An attempt to close the FTP adapter command definition file failed.
(S): Processing continues.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEK30609-E

One or more property values specified in the definition file are invalid. (file name = aa....aa, key name = bb....bb, specified value = cc....cc)

aa....aa: Path of the definition file

bb....bb: Key name

cc....cc: Specified value

Description: A property value specified in the FTP adapter command definition file is invalid.
(S): Processing ends.
(O): Correct the property value, and then re-execute the processing.

KDEK30901-W

An error occurred while outputting information to the method trace. (adapter name = aa....aa, method name = bb....bb, error cause = cc....cc)

aa....aa: Adapter name

bb....bb: Method name in the Trace Common library

cc....cc: Detailed message of the Trace Common library

Description

An error occurred during the output of the method trace or protocol trace.

(S)

The collection of the trace where the error occurred is cancelled and processing continues.

(O)

Check whether the cause of the error is associated with operations.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.