2.5 Messages from KDEC80000 to KDEC80399 : Messages

KDEC80000-E

An internal error occurred in File Operation Adapter. (adapter name = aa....aa, exception information = bb....bb)

aa....aa: Adapter name

bb....bb: Exception information

Description: An unexpected error occurred in the file operations adapter.
(S): The processing of the file operations adapter is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEC80001-E

An attempt to read the file operations adapter definition file failed. (adapter name = aa....aa, operation = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to read the file operations adapter definition file failed.
(S): The processing of the file operations adapter is interrupted.
(O): Add the file operations adapter definition file in a self-defined file.

KDEC80002-E

The acquisition of a request message failed. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: An attempt to obtain a request message failed.
(S): The processing of the file operations adapter is interrupted.
(O): Set up a schema appropriate to the operations for the service components in the request message information settings, in the window for defining the file operations adapter in the development environment, and then re-package the file operations adapter.

KDEC80003-E

An attempt to create the response message failed. (adapter name = aa....aa, operation = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to generate a response message failed.
(S): The processing of the file operations adapter is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEC80004-E

Asynchronous communication is not supported. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: An Asynchronous communication is not supported.
(S): The processing of the file operations adapter is interrupted.
(O): Set the communication model for the operation information settings of the file operations adapter definitions in the development environment to synchronous, and then re-package the file operations adapter.

KDEC80005-E

An attempt to read a character code conversion UOC definition file has failed. (adapter name = aa....aa, exception information = bb....bb)

aa....aa: Adapter name

bb....bb: Exception information

Description: An attempt to read a self-defined file for the character code conversion UOC failed.
(S): The processing of the file operations adapter is interrupted.
(O): Contact maintenance personnel.

KDEC80006-E

No work folders are targeted by the operation. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

Description: No work folders were found for the operations to be executed.
(S): The processing of the file operations adapter is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEC80007-E

No common folders are targeted by the operation. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

Description: No common folders were found for the operations to be executed.
(S): The processing of the file operations adapter is interrupted.
(O): Make sure that a folder exists in the path specified with the common-folder-<Common folder definition name> property of the HCSC server runtime definition file.

KDEC80008-E

An attempt to acquire the locks of the target files has failed. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

ee....ee: Exception information

Description

An attempt to obtain the locks for target files failed.

(S)

The processing of the file operations adapter is interrupted.

(O)

Another process might be accessing the target files. Wait for the access to end or adjust the csc.adapter.fileOperation.files.lock.retry.count and csc.adapter.fileOperation.files.lock.retry.interval in the self-defined property file.

Also, appropriate access permissions might not have been assigned. Review and, if necessary, revise the permission settings for the target file.

KDEC80009-E

The common-folder-aa....aa property is not defined in the HCSC server runtime definition. (adapter name = bb....bb, operation = cc....cc)

aa....aa: Common folder definition name

bb....bb: Adapter name

cc....cc: Operation name

Description: The folder path corresponding to the input or output folder names specified in the request message is not defined.
(S): The processing of the file operations adapter is interrupted.
(O): Specify the common-folder-<Common folder definition name> property in the HCSC server runtime definition file.

KDEC80010-E

Nothing is specified for the output file element of the request message. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description

The contents of the request message are incorrect.

If a common folder (attribute: common="true") is specified for the output folder of the request message, you must specify the output file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Specify the file name for the output file of the request message.

KDEC80011-E

An attempt to read the input file has failed. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

ee....ee: Exception information

Description

An attempt to read the input file failed.

(S)

The processing of the file operations adapter is interrupted.

(O)

Make sure that the input file exists in the input folder specified in the request message.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEC80012-E

An attempt to write the output file has failed. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

ee....ee: Exception information

Description

An attempt to write the output file failed.

(S)

The processing of the file operations adapter is interrupted.

(O)

Make sure that the specified folder exists in the output folder of the request message.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEC80013-E

An attempt to close the file has failed. (adapter name = aa....aa, operation = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to close a file failed.
(S): The processing of the file operations adapter is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEC80014-E

A request ID (request-id) has not been specified in the request message. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description

The specified request message is incorrect.

To read or write a file for a work folder, you must specify the request ID (request-id).

(S)

The processing of the file operations adapter is interrupted.

(O)

Specify the request ID (request-id) of the request message.

KDEC80015-W

A work folder is specified for the output folder element of the request message. The specified output file element will be ignored. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: If a work folder (attribute: common="false") is specified for the output folder of the request message, the file specified as the output file is ignored and determined automatically.
(S): Processing continues.
(O): To eliminate this warning, specify Null (or omit the tags) for the output file of the request message.

KDEC80016-W

A work folder is specified for the input folder element of the request message. The specified input folder will be ignored. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: If a work folder (attribute: common="false") is specified for the input folder of the request message, the folder specified as the input folder is ignored and the processing is performed for the work folder.
(S): Processing continues.
(O): To eliminate this warning, specify Null for the input folder of the request message.

KDEC80017-W

A work folder is specified for the output folder element of the request message. The folder specified for the output folder will be ignored. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: If a work folder (attribute: common="false") is specified for the output folder of the request message, the folder specified as the output folder is ignored and the processing is performed for the work folder.
(S): Processing continues.
(O): To eliminate this warning, specify Null for the output folder of the request message.

KDEC80018-E

No common folder definition is specified for the input folder element of the request message. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description

The specified request message is incorrect.

If a common folder (attribute: common="true") is specified for the input folder of the request message, you must specify the common folder definition name.

(S)

The processing of the file operations adapter is interrupted.

(O)

If a common folder (attribute: common="true") is specified for the input folder of the request message, specify the common folder definition name for the input folder.

KDEC80019-E

No common folder definition is specified for the output folder element of the request message. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description

The specified request message is incorrect.

If a common folder (attribute: common="true") is specified for the output folder of the request message, you must specify the common folder definition name.

(S)

The processing of the file operations adapter is interrupted.

(O)

If a common folder (attribute: common="true") is specified for the output folder of the request message, specify the common folder definition name for the output folder.

KDEC80020-E

The file operation adapter definition (an operation) is invalid. (adapter name = aa....aa)

aa....aa: Adapter name

Description

The file operations adapter definition (operation) is incorrect.

(S)

The processing of the file operations adapter is interrupted.

(O)

Specify one of the following for the operations in the Service Adapter Settings (Basic) window (all uppercase):

TRANSFORM
COPY
DELETE

KDEC80021-E

A required parameter is missing from the request message. (adapter name = aa....aa, operation = bb....bb, node = cc....cc, attribute = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

dd....dd: Attribute name

When only a node is indicated: Null

Description: The request message reported for the operations of the file operations adapter is incorrect.
(S): The processing of the file operations adapter is interrupted.
(O): Make sure that the items that must be coded in the request message are specified on the basis of the message.

KDEC80022-E

A prohibited character was specified in the request message. (adapter name = aa....aa, operation = bb....bb, node = cc....cc, attribute = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

dd....dd: Attribute name

When only a node is indicated: Null

Description: A prohibited character was included in a part of the request message.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise the characters to be specified in the request message on the basis of the message.

KDEC80023-E

The initialization of File Operations Adapter has failed. (adapter name = aa....aa, operation = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Exception information

Description: An attempt to initialize the file operations adapter failed.
(S): The start processing of the file operations adapter is cancelled.
(O): Contact maintenance personnel.

KDEC80024-I

File Operations Adapter has started. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The file operations adapter has started.
(S): Processing continues.

KDEC80025-I

File Operations Adapter has ended. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The file operations adapter has stopped.
(S): Processing continues.

KDEC80026-W

The default value will be used for the maintenance log output path. (adapter name = aa....aa, default value = bb....bb)

aa....aa: Adapter name

bb....bb: Default value

Description: The default value will be used for the maintenance log output path.
(S): The maintenance log is output to the default output destination and processing continues.
(O): Contact maintenance personnel.

KDEC80027-E

Maintenance logs cannot be output because the default maintenance log output path cannot be acquired. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The maintenance log cannot be output because the default maintenance log output path cannot be obtained.
(S): The start processing of the file operations adapter is cancelled.
(O): Contact maintenance personnel.

KDEC80028-E

An error occurred during maintenance log output processing. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Method name of the Trace Common library

cc....cc: Detailed message of the Trace Common library

Description: An error occurred during the maintenance log output processing.
(S): The collection of maintenance log is cancelled and processing continues.
(O): Contact maintenance personnel.

KDEC80029-E

The initialization of the maintenance logs failed. (adapter name = aa....aa, prefix string of output file = bb....bb, number of output files = cc....cc, size of output files = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Parameter used for initialization (<Output destination directory>\cscadpfopmnt)

cc....cc: Parameter used for initialization (number of output files)

dd....dd: Parameter used for initialization (size of output file)

ee....ee: Detailed message of the Trace Common library

Description: An attempt to initialize the maintenance log failed.
(S): Complies with the message that is output next.
(O): Contact maintenance personnel.

KDEC80030-W

Maintenance log end processing failed. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the method where the error occurred

cc....cc: Detailed message of the Trace Common library

Description: The maintenance log end processing failed.
(S): The end processing continues.
(O): Contact maintenance personnel.

KDEC80031-E

An attempt to read an execution environment property file has failed. (adapter name = aa....aa, file name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the file operations adapter runtime-environment property file

cc....cc: Exception information

Description: An attempt to read the file operations adapter runtime-environment property file failed.
(S): The processing of the file operations adapter is interrupted.
(O): Check the file operations adapter runtime-environment property file.

KDEC80032-E

The initialization of the maintenance logs failed. (adapter name = aa....aa)

aa....aa: Adapter name

Description: An attempt to initialize the maintenance log failed.
(S): The processing of the file operations adapter is interrupted.
(O): Contact maintenance personnel.

KDEC80033-E

A path prohibited by the server file system was specified in the request message. (adapter name = aa....aa, operation = bb....bb, node = cc....cc, attribute = dd....dd, path = ee....ee, exception information = ff....ff)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

dd....dd: Attribute name

When only a node is indicated: Null

ee....ee: Absolute path

ff....ff: Exception information

Description: The path prohibited by the file system was specified in the request message.
(S): The start processing of the file operations adapter is cancelled.
(O): Modify the request message according to the message so that the path is permitted by the file system.

KDEC80034-E

One or more property values specified in the execution environment property file are invalid. (adapter name = aa....aa, file path = bb....bb, key name = cc....cc)

aa....aa: Adapter name

bb....bb: Path of the file operations adapter runtime-environment property file

cc....cc: Key name

Description: The property value specified in the file operations adapter runtime-environment property file is invalid.
(S): The processing of the file operations adapter is interrupted.
(O): On the basis of the message, review and, if necessary, revise the file operations adapter runtime-environment property file.

KDEC80035-E

The file specified for the target of the operation is a directory. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description: A folder was found with the same name as the file name specified in the request message.
(S): The processing of the file operations adapter is interrupted.
(O): Check the absolute path of the directory, and either delete or save the directory that has the same name as the file name. If the name is specified in the input file, review and, if necessary, revise the file name in the request message.

KDEC80036-W

The default value will be used for the stack trace output path. (adapter name = aa....aa, default value = bb....bb)

aa....aa: Adapter name

bb....bb: Default value

Description: The default value will be assumed for the exception log output path.
(S): The exception log is output to the default output destination and processing continues.
(O): Make sure that the trace output path specified in the file operations adapter runtime-environment property file exists, or see the messages displayed before this message, and eliminate the cause of the error.

KDEC80037-E

Stack traces cannot be output because the default stack trace output path cannot be acquired. (adapter name = aa....aa)

aa....aa: Adapter name

Description: The exception log cannot be output because the default exception log output destination cannot be obtained.
(S): The start processing of the file operations adapter is cancelled.
(O): See the messages displayed before this message, and eliminate the cause of the error.

KDEC80038-E

An error occurred during stack trace output processing. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Method name in the Trace Common library

cc....cc: Detailed message of the Trace Common library

Description: An error occurred during the exception log output processing.
(S): The collection of exception log is cancelled and processing continues.
(O): Eliminate the cause of the error on the basis of the detailed message.

KDEC80039-E

The initialization of the stack traces failed. (adapter name = aa....aa, prefix string of output file = bb....bb, number of output files = cc....cc, size of output files = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Parameter used for initialization (<Output destination directory>\cscadpfopexp)

cc....cc: Parameter used for initialization (number of output files)

dd....dd: Parameter used for initialization (size of output file)

ee....ee: Detailed message of the Trace Common library

Description: An attempt to initialize the exception log failed.
(S): Complies with the message that is output next.
(O): If the cause of the error is an invalid parameter, correct the file operations adapter runtime-environment property file, and then restart the file operations adapter. If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEC80040-W

Stack trace end processing failed. (adapter name = aa....aa, method name = bb....bb, exception information = cc....cc)

aa....aa: Adapter name

bb....bb: Name of the method where the error occurred

cc....cc: Detailed message of the Trace Common library

Description

The exception log end processing failed.

(S)

The end processing continues.

(O)

Check whether the cause of the error is associated with operations.

If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEC80041-E

The initialization of the stack traces failed. (adapter name = aa....aa)

aa....aa: Adapter name

Description: An attempt to initialize the exception log failed.
(S): The start processing of the file operations adapter is cancelled.
(O): If the cause of the error is an invalid parameter, correct the file operations adapter runtime-environment property file, and then restart the file operations adapter. If the cause of the error is not associated with operations, collect the log and trace information, and then contact maintenance personnel.

KDEC80043-E

An attempt to convert a file has failed. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

ee....ee: Exception information

Description

An attempt to transform a file failed.

(S)

The processing of the file operations adapter is interrupted.

(O)

Make sure that the following information is correct:

Binary format definition of the input file
Binary format definition of the output file
Layout transformation definition

KDEC80044-E

An attempt to read a file for conversion has failed. (adapter name = aa....aa, operation = bb....bb, file name = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File name

dd....dd: Exception information

Description: An attempt to read a file failed.
(S): The processing of the file operations adapter is interrupted.
(O): Make sure that the file (transformation-related file) specified in the file operations adapter definition file is set up for the self-defined file.

KDEC80045-W

The input file is not the expected size. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

The input file differs from the assumed size (surplus records were found when the number of records were counted).

(S)

Processing continues.

(O)

Check the following information:

EOD is specified at the end of the input file.
The settings for the following items in the file operations adapter definition file are correct:

csc.adapter.fileOperation.transform.headerRecord

csc.adapter.fileOperation.transform.trailerRecord

csc.adapter.fileOperation.transform.header.fixedSize

csc.adapter.fileOperation.transform.data.fixedSize

csc.adapter.fileOperation.transform.trailer.fixedSize
The input file is correct.

KDEC80046-E

The input file is not as big as was expected. As a result, the file cannot be converted. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

An attempt to transform a file failed.

The input file does not have the assumed size, so the file cannot be transformed.

If the header and trailer record parts are specified, the input file must be larger than the specified header and trailer record parts.

(S)

The processing of the file operations adapter is interrupted.

(O)

Check the following information:

The input file is correct (the size is adequate).
The settings for the following items in the file operations adapter definition file are correct:

csc.adapter.fileOperation.transform.headerRecord

csc.adapter.fileOperation.transform.trailerRecord

csc.adapter.fileOperation.transform.header.fixedSize

csc.adapter.fileOperation.transform.data.fixedSize

csc.adapter.fileOperation.transform.trailer.fixedSize

KDEC80047-E

The input file does not have as many records as was expected. As a result, the file cannot be converted. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

An attempt to transform a file failed.

The input file does not have the assumed number of records, so the file cannot be transformed.

If the header and trailer record parts are specified, the input file must have at least the number of records in the specified header and trailer record parts.

(S)

The processing of the file operations adapter is interrupted.

(O)

Check the following information:

The number of records in the input file is at least the total of the number of records in the header record part and the number of records in the trailer record part.
The settings for the following items in the file operations adapter definition file are correct:

csc.adapter.fileOperation.transform.headerRecord

csc.adapter.fileOperation.transform.trailerRecord

KDEC80049-E

(aa....aa) is not specified in the file operations adapter definition file. (adapter name = bb....bb, operation = cc....cc)

aa....aa: Key name

bb....bb: Adapter name

cc....cc: Operation name

Description: The definition of the file operations adapter definition file is invalid.
(S): The processing of the file operations adapter is interrupted.
(O): Check the file operations adapter definition file.

KDEC80050-E

The converted file already exists. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

An exception occurs when a file with the same name exists at the transformation destination because an error is specified in the csc.adapter.fileOperation.transform.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

To allow file overwriting

Specify "overwrite" in the csc.adapter.fileOperation.transform.existFile property.
To disallow file overwriting

Save or delete the file existing in the transformation destination folder.

KDEC80051-E

The input file exceeds the maximum allowable size. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

The processing will be canceled because the size of the input file exceeds the maximum input file size specified in the transform.limitsize property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the input file size to the maximum input file size or less.
Increase the maximum input file size to the input file size or more.

KDEC80052-E

A timeout occurred while converting the file. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc, file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory

dd....dd: File name

Description

The processing will be canceled because the time taken for file transformation exceeds the timeout value specified in the transform.timeout property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the number of input file records to make sure that the transformation ends within the timeout value.
Extend the timeout value.

KDEC80053-E

One or more property values specified in the file operations adapter definition file are invalid. (adapter name = aa....aa, operation = bb....bb, key name = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Key name

Description: The property value specified in the file operations adapter definition file is invalid.
(S): The processing of the file operations adapter is interrupted.
(O): Check the file operations adapter definition file.

KDEC80054-E

The character encoding of the output-template XML file is not UTF-8. (adapter name = aa....aa, operation = bb....bb, character encoding = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Specified character encoding

Description: The character encoding of the output-template XML file is not UTF-8.
(S): The processing of the file operations adapter is interrupted.
(O): Set the character encoding of the output-template XML file to UTF-8.

KDEC80055-E

The aa....aa record appears more than once in the output-template XML file. (adapter name = bb....bb, operation = cc....cc)

aa....aa: Record type

header
data
trailer

bb....bb: Adapter name

cc....cc: Operation name

Description: The same type of record appears multiple times in the output-template XML file.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise, the occurrence count of the record element in the output-template XML file.

KDEC80056-E

In the output-template XML file, the aa....aa record either is incorrectly located or does not exist. (adapter name = bb....bb, operation = cc....cc)

aa....aa: Record type

header
data
trailer

bb....bb: Adapter name

cc....cc: Operation name

Description

The location of a record in the output-template XML file is invalid, or a required record does not exist.

The possible causes are as follows:

The header record, data record, or trailer record does not appear.
The data record appears before the header record (the header is output to aa....aa in the message).
The trailer record appears before the header record (the header is output to aa....aa in the message).
The trailer record appears before the data record (the data is output to aa....aa in the message).

(S)

The processing of the file operations adapter is interrupted.

(O)

Add the record element to the output-template XML file, or review and, if necessary, revise, the path of the record element.

KDEC80057-E

The aa....aa record appears more than once in an input XML file. (adapter name = bb....bb, operation = cc....cc, directory path = dd....dd, file name = ee....ee)

aa....aa: Record type

header
data
trailer

bb....bb: Adapter name

cc....cc: Operation name

dd....dd: Absolute path of the directory

ee....ee: File name

Description: Multiple header, data, or trailer records appear in the input XML file.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise, the occurrence count of the record element in the input XML file.

KDEC80058-E

In an input XML file, the aa....aa record either is incorrectly located or does not exist. (adapter name = bb....bb, operation = cc....cc, directory path = dd....dd, file name = ee....ee)

aa....aa: Record type

header
data
trailer

bb....bb: Adapter name

cc....cc: Operation name

dd....dd: Absolute path of the directory

ee....ee: File name

Description

The location of a record in the input XML file is invalid, or a required record does not exist.

The possible causes are as follows:

The header record or trailer record does not appear (an error does not occur if the header record and trailer record appear at the correct location, and if the data records are 0).
The data record appears before the header record (the header is output to aa....aa in the message).
The trailer record appears before the header record (the header is output to aa....aa in the message).
The trailer record appears before the data record(the data is output to aa....aa in the message).

(S)

The processing of the file operations adapter is interrupted.

(O)

Add the record element to the input XML file, or review and, if necessary, revise, the path of the record element.

KDEC80059-E

The aa....aa record appears more than once in an output XML file. (adapter name = bb....bb, operation = cc....cc, directory path = dd....dd, file name = ee....ee)

aa....aa: Record type

header
data
trailer

bb....bb: Adapter name

cc....cc: Operation name

dd....dd: Absolute path of the directory

ee....ee: File name

Description: Multiple header, data, or trailer records appear in the output XML file.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise, the record mapping definitions.

KDEC80060-E

A property value was specified more than once in the file operation adapter definition file. (adapter name = aa....aa, operation = bb....bb, key name1 = cc....cc, key name2 = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Key name

dd....dd: Key name

Description: The property value specified in the file operations adapter definition file is duplicated in 2 or more keys.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise, the specified file operations adapter definition file so that the key values output to the message are not duplicated.

KDEC80061-E

An internal error occurred while copying the file. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd, output directory path = ee....ee, output file name = ff....ff, exception information = gg....gg)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the copy source directory

dd....dd: Copy source file name

ee....ee: Absolute path of the copy destination directory

ff....ff: Copy destination file name

gg....gg: Exception information

Description: An unexpected error occurred while a file was being copied.
(S): The processing of the file operations adapter is interrupted.
(O): Collect the log and trace information, and then contact maintenance personnel.

KDEC80062-E

The copied file already exists. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the copy destination directory

dd....dd: Copy destination file name

Description

An exception occurs when a file is found at the copy destination because an error is specified in the csc.adapter.fileOperation.copy.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

To allow copying by overwriting, specify "overwrite" in the csc.adapter.fileOperation.copy.existFile property.
Save or delete the file existing in the copy destination.

KDEC80081-E

An error occurred during deletion processing. (adapter name = aa....aa, operation = bb....bb, path = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the file or directory to be deleted

dd....dd: Exception information

Description

An unexpected error occurred during the deletion processing.

(S)

The processing of the file operations adapter is interrupted.

(O)

Eliminate the cause of the error based on the exception information. If you cannot determine the cause of the error, collect the log and trace information, and then contact the maintenance personnel.

Check the following:

To delete a work folder, check whether a file in the work folder is being used.
To delete a subfolder of the common folder, check whether a file in the subfolder is being used.

KDEC80082-W

A work folder is specified for the input folder element of the request message. The specified input file will be ignored. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

dd....dd: Name of the file to be deleted

Description

The specified request message is redundant.

If a work folder (attribute: common="false") is specified for the input folder of the request message, the file name specified as the input file is ignored and the work folder will be deleted.

(S)

Processing continues.

(O)

To eliminate this warning, specify Null (or omit tags) in the input file of the request message.

KDEC80084-E

The file specified for the input file element of the request message is not deletable. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

dd....dd: Name of the file to be deleted

Description: The sub-folders and the device file cannot be deleted.
(S): The processing of the file operations adapter is interrupted.
(O): Review and, if necessary, revise the specified input file of the request message.

KDEC80085-W

The file specified for the input file element of the request message does not exist. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

dd....dd: Name of the file to be deleted

Description: The specified file does not exist. The file might have been already deleted.
(S): Processing continues.

KDEC80086-E

Both the file name and subfolder name are specified for the request message. (adapter name = aa....aa, operation = bb....bb, file name = cc....cc, subfolder name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: File

dd....dd: Subfolder

Description: Both the file and the subfolder are specified.
(S): The processing of the file operations adapter is interrupted.
(O): Check and, if necessary, revise the file and subfolder specified in the request message.

KDEC80087-E

Neither the file name nor the subfolder name is specified for the request message. (adapter name = aa....aa, operation = bb....bb)

aa....aa: Adapter name

bb....bb: Operation name

Description: Neither a file nor a subfolder is specified.
(S): The processing of the file operations adapter is interrupted.
(O): Check and, if necessary, revise the file and subfolder specified in the request message.

KDEC80088-W

A work folder is specified as the input folder in the request message. The specified subfolder name will be ignored. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, subfolder name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

dd....dd: Subfolder path

Description

The request message contains a redundant specification.

If a work folder (attribute: common="false") is specified for the request message input folder, the folder path specified for the subfolder is ignored and the work folder will be deleted.

(S)

Continues processing.

(O)

To eliminate this warning, specify Null for the subfolder of the request message, or omit the tags.

KDEC80090-E

The folder specified as the subfolder in the request message cannot be deleted. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

Description: Files or common folders cannot be deleted.
(S): The processing of the file operations adapter is interrupted.
(O): Check and, if necessary, revise the subfolder specifed in the request message.

KDEC80091-W

The folder specified as the subfolder in the request message does not exist. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the directory to be deleted

Description: Files or common folders cannot be deleted.
(S): Continues processing.
(O): The specified directory does not exist. It might have alrady been deleted.

KDEC80101-E

An attempt to compress a file has failed. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the compression source directory

dd....dd: Name of the compression source file

ee....ee: Exception information

Description: An error occurred during the compression of a file.
(S): The processing of the file operations adapter is interrupted.
(O): Eliminate the cause of the error on the basis of the exception information. If the cause is unknown, collect the log and trace information, and then contact maintenance personnel.

KDEC80102-E

The compressed file already exists. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the compression destination directory

dd....dd: Name of the compression destination file

Description

An exception occurs if a file is found in the compression destination because "error" is specified in the csc.adapter.fileOperation.compress.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

To allow compression by overwriting, specify "overwrite" in the csc.adapter.fileOperation.compress.existFile property of the file operations adapter definition file.
Save or delete the file existing in the compression destination.

KDEC80103-W

The specification of the input file name in the request message is duplicated. The specified input file names will be considered to be the same, and processing will continue. (adapter name = aa....aa, operation = bb....bb, node = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

Description

The request message contains a redundant specification.

If a duplicated file name is specified for the input file name of the request message, processing continues considering the input files to be the same. Note that this message is displayed whenever the input file names are considered to be the same.

(S)

Processing continues.

(O)

To eliminate this warning, specify a file name that is not duplicated for the input file of the request message.

KDEC80104-E

The specification of the entry name in the request message is duplicated. (adapter name = aa....aa, operation = bb....bb, node = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

Description

The contents of the request message are incorrect.

You cannot specify a duplicated entry name for the entry name in the request message.

If Null is specified for the entry name, the input file name of the same <input-file> element is set up. In this case as well, you cannot specify a duplicated name.

(S)

The processing of the file operations adapter is interrupted.

(O)

Specify an entry name that is not duplicated for the entry name in the request message.

KDEC80105-E

The input file exceeds the maximum size for input files. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the compression source directory

dd....dd: Name of the compression source file

Description

Processing is cancelled because the size of the input file exceeds the maximum input file size specified in the compress.inputfile.limitsize property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the input file size to the maximum input file size or less.
Increase the maximum input file size to the input file size or more.

Specify the maximum input file size with the compress.inputfile.limitsize property of the file operations adapter runtime-environment property file.

If the maximum input file size is set to the maximum, the input file size is unlimited and no error message will be output.

KDEC80106-E

The output file exceeds the maximum size for output files. (adapter name = aa....aa, operation = bb....bb, input base directory path = cc....cc, input file path = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the compression source common folder or work folder

dd....dd: List of compression source file relative paths from the absolute path in cc....cc (if the string exceeds 1,024 characters, the 1,025 and subsequent characters are omitted)

Description

Processing is cancelled because the output file size exceeds the maximum input file size specified in the compress.outputfile.limitsize property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Specify the input file in such a way that the output file is no more than the maximum output file size.
Increase the maximum output file size to the output file size or more.

Specify the maximum output file size with the compress.outputfile.limitsize property of the file operations adapter runtime-environment property file.

If the maximum output file size is set to the maximum, the output file size is unlimited and no error message will be output.

KDEC80107-E

A timeout occurred during compression of files. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file path = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the compression source common folder or work folder

dd....dd: List of compression source file relative paths from the absolute path in cc....cc (if the string exceeds 1,024 characters, the 1,025 and subsequent characters are omitted)

Description

Processing is cancelled because the time taken for file compression exceeds the timeout value specified in the compress.timeout property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the number of input files to make sure that the compression ends within the timeout value.
Reduce the size of the input files to make sure that the compression ends within the timeout value.
Extend the timeout value.

Specify the timeout value with the compress.timeout property of the file operations adapter runtime-environment property file.

KDEC80121-E

An attempt to extract a file has failed. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd, exception information = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

ee....ee: Exception information

Description

An error occurred during the extraction of the file

(S)

The processing of the file operations adapter is interrupted.

(O)

Eliminate the cause of the error on the basis of the exception information. The possible causes and measures are as follows:

The input file is not a ZIP file compressed with the DEFLATE compression algorithm.

In the input file, specify a ZIP file compressed with the DEFLATE compression algorithm.
There are no entries in the input file.

In the input file, specify a ZIP file storing at least one entry.

If the cause is unknown, collect the log and trace information, and then contact maintenance personnel.

KDEC80122-E

The extracted file already exists. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction destination directory

dd....dd: Name of the extraction destination file

Description

An exception occurs if a file is found in the extraction destination because "error" is specified in the csc.adapter.fileOperation.extract.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

To allow extraction by overwriting, specify "overwrite" in the csc.adapter.fileOperation.extract.existFile property of the file operations adapter definition file.
Save or delete the file existing in the extraction destination.

KDEC80123-E

The entry in the input file is invalid. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

Description

The entry found in the input file is invalid. This file cannot be extracted.

(S)

The processing of the file operations adapter is interrupted.

(O)

The possible causes and measures are as follows:

A directory exists in the input file. Save or delete the directory existing in the input file.
The name of the file existing in the input file is invalid. Correct the file with the invalid name existing in the input file.

KDEC80125-E

The number of files in the input file exceeds the limit. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

Description: The number of files found in the input file exceeds the limit. A ZIP file storing 1,000 files or more cannot be extracted.
(S): The processing of the file operations adapter is interrupted.
(O): Reduce the number of files to 999 or less by saving or deleting the files existing in the input file.

KDEC80126-E

The input file exceeds the maximum size for input files. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

Description

Processing is cancelled because the input file size exceeds the maximum input file size specified in the extract.inputfile.limitsize property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the input file size to the maximum input file size or less.
Increase the maximum input file size to the input file size or more.

Specify the maximum input file size with the extract.inputfile.limitsize property of the file operations adapter runtime-environment property file.

If the maximum input file size is set to the maximum, the input file size is unlimited and no error message will be output.

KDEC80127-E

The output file exceeds the maximum size for output files. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

Description

Processing is cancelled because the output file size exceeds the maximum output file size specified in the extract.outpufile.limitsize property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Specify the input file in such a way that the output file is no more than the maximum output file size.
Increase the maximum output file size to the output file size or more.

Specify the maximum output file size with the extract.outpufile.limitsize property of the file operations adapter runtime-environment property file.

If the maximum output file size is set to the maximum, the output file size is unlimited and no error message will be output.

KDEC80128-E

A timeout occurred during extraction of a file. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the extraction source directory

dd....dd: Name of the extraction source file

Description

Processing is cancelled because the time taken for file extraction exceeds the timeout value specified in the extract.timeout property of the file operations adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Execute one of the following methods:

Reduce the size of the input files to make sure that the extraction ends within the timeout value.
Extend the timeout value.

Specify the timeout value with the extract.timeout property of the file operations adapter runtime-environment property file.

KDEC80129-E

A prefix for the output file name in the request message is not specified. (adapter name = aa....aa, operation = bb....bb, node = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

Description

The contents of the request message are incorrect.

If a common folder (attribute: common="true") is specified for the output folder of the request message, you must specify the prefix for the output file name.

(S)

The processing of the file operations adapter is interrupted.

(O)

Specify the prefix of the output file name for the request message.

KDEC80130-W

A work folder is specified for the output folder in the request message. The specified prefix for the output file name will be ignored. (adapter name = aa....aa, operation = bb....bb, node = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

Description

The request message contains a redundant specification.

If a work folder (attribute: common="false") is specified for the output folder of the request message, the prefix of the output file name is ignored and determined automatically.

(S)

Processing continues.

(O)

To eliminate this warning, specify Null for the prefix of the output file name of the request message, or omit the tags.

KDEC80131-W

A work folder is specified for the output folder in the request message. The specified output subfolder name will be ignored. (adapter name = aa....aa, operation = bb....bb, node = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Node name

Description

The request message contains a redundant specification.

If a work folder (attribute: common="false") is specified for the request message output folder, the folder path specified for the output subfolder is ignored.

(S)

Continues processing.

(O)

To eliminate this warning, specify Null for the output subfolder of the request message, or omit the tags.

KDEC80170-E

Failed to move the file. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd, output directory path = ee....ee, output file name = ff....ff, exception information = gg....gg)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the source directory

dd....dd: Source file name

ee....ee: Absolute path of the destination directory

ff....ff: Destination file name

gg....gg: Exception information

Description

An error occurred while the file was being moved.

(S)

The processing of the file operations adapter is interrupted.

(O)

Eliminate the cause of the error based on the exception information. If you cannot determine the cause of the error, collect the log and trace information, and then contact the maintenance personnel.

Possible causes are as follows:

If the exception information contains jp.co.Hitachi.soft.csc.msg.common.filelock.exception.GeneralAccessDeniedException, the source or destination directory might not be accessible. Check which files are being used, make sure that you have access permission for the destination directory, and then retry the operation to move the file.
If the exception information contains jp.co.Hitachi.soft.csc.msg.common.filelock.exception.GeneralNoSuchFileException, the source file or the destination storage directory might not exist. Make sure that the file and directory exist.

KDEC80171-E

The moved file already exists. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the destination directory

dd....dd: Destination file name

Description

An exception occurs if the file exists in the destination directory because error is specified for the csc.adapter.fileOperation.move.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Perform one of the following:

To permit overwrite output, specify overwrite for the csc.adapter.fileOperation.move.existFile property of the file operations adapter definition file.
Save or delete the file existing in the destination directory.

KDEC80172-E

An attempt to overwrite-move the file failed, because a subdirectory exists in the destination directory. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the destination directory

dd....dd: Destination file name

Description: An attempt to move and overwrite the file failed because a directory exists in the destination directory.
(S): The processing of the file operations adapter is interrupted.
(O): Save or delete the directory existing in the destination directory.

KDEC80173-E

The input file to be moved does not exist. (adapter name = aa....aa, operation = bb....bb, input directory path = cc....cc, input file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the source directory

dd....dd: Source file name

Description: An attempt to move the file failed because the source file does not exist.
(S): The processing of the file operations adapter is interrupted.
(O): Make sure that the specified source file is correct.

KDEC80180-E

An attempt to get a list has failed. (adapter name = aa....aa, operation = bb....bb, input path = cc....cc, exception information = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the list acquisition source

dd....dd: Exception information

Description

An error occurred during acquisition of a list of files.

(S)

The processing of the file operations adapter is interrupted.

(O)

Eliminate the cause of the error based on the exception information. If you cannot determine the cause of the error, collect the log and trace information, and then contact the maintenance personnel.

The possible cause is as follows:

If the exception information contains jp.co.Hitachi.soft.csc.msg.common.filelock.exception.GeneralAccessDeniedException, the directory containing the list to be referenced might not be accessible. Check the access permission.

KDEC80181-E

The list output file already exists. (adapter name = aa....aa, operation = bb....bb, output directory path = cc....cc, output file name = dd....dd)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the list output destination directory

dd....dd: List output destination file name

Description

An exception occurs if a file exists in the list output destination directory because error is specified for the csc.adapter.fileOperation.listWrite.existFile property of the file operations adapter definition file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Perform one of the following methods:

To permit overwrite output, specify overwrite for the csc.adapter.fileOperation.writeList.existFile property of the file operations adapter definition file
Save or delete the file existing in the list output destination directory.

KDEC80182-E

The output file exceeds the maximum size for output files. (adapter name = aa....aa, operation = bb....bb, input path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the list acquisition source

Description

Processing is canceled because the output file size exceeds the maximum output file size specified for the listWrite.outputfile.limitsize property of the file operations-adapter runtime-environment property file.

(S)

The processing of the file operations adapter is interrupted.

(O)

Perform one of the following methods:

Reduce the output file size to the maximum output file size or less by moving or deleting files in the list acquisition source directory.
Change the maximum output file size (specified for the writeList.outputfile.limitsize property of the file operations-adapter runtime-environment property file) to the output file size or more.

KDEC80183-W

The file specified for the input-file-name element of the request message does not exist. (adapter name = aa....aa, operation = bb....bb, input path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Absolute path of the list acquisition source

Description: The list could not be acquired because there was no file or directory in the specified path.
(S): Continues processing.
(O): No file or directory exists in the specified path. Check the location of the specified path.

KDEC80201-E

The path specified for the request message is invalid. (adapter name = aa....aa, operation = bb....bb, node = cc....cc, attribute = dd....dd, value = ee....ee)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Element name

dd....dd: Attribute name

When only a node is indicated: Null

ee....ee: Value determined to be invalid

Description

The specified path is invalid due to one of the following causes:

The specified file name is . or ...
The file is not a descendant file of the common folder.
The specified directory is not a subfolder of the common folder.

(S)

The processing of the file operations adapter is interrupted.

(O)

Check and, if necessary, revise the path specified in the request message.

KDEC80202-E

An attempt to make the folder failed. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Directory path

Description: An attempt to create a subfolder of the common folder failed.
(S): The processing of the file operations adapter is interrupted.
(O): Check and, if necessary, revise the path specified in the request message. If the specified path is correct, check and, if necessary, revise the configuration and status of the parent directory of the directory that could not be created.

KDEC80205-E

A subfolder of a common folder does not exist. (adapter name = aa....aa, operation = bb....bb, directory path = cc....cc)

aa....aa: Adapter name

bb....bb: Operation name

cc....cc: Path of the subfolder

Description: The subfolder of a common folder does not exist, or a file is specified for the subfolder.
(S): The processing of the file operations adapter is interrupted.
(O): Check and, if necessary, revise the path specified in the request message. If the specified path is correct, check and, if necessary, revise the configuration and status of the common folder.