3.5.5 Definition files used with the Easy Setup functionality for the HCSC production environment

(1) Description format of the definition files

The format for describing the definition files in this subsection is as follows:

File name

Specifies the name of the definition file.

Description

Specifies the description of the definition file.

File storage destination

Specifies the storage destination of the definition file.

Items to be edited ^#

Specifies the items to be edited when the definition file is created and changed.

Items for which values different from default values are specified^#

Specifies the items for which values different from default values are specified when the setup is performed by using the Easy Setup functionality for the HCSC production environment.

Note#

The table contents of these items are as follows:

Category

The items in the definition file are categorized.

Item name

Specifies the names of items to be edited when the definition file is created or changed, and the items for which values different from default values are specified in the Easy Setup functionality for the HCSC production environment.

Parameters to be specified (or specified) in <param-name>

Specifies parameters to be specified or that are specified in the <param-name> tag. Applicable only to the Easy Setup definition file (SOA.xml).

Default value

Specifies the default values for the definition file. If the value of an item is omitted, the default value is assumed.

Values specified in the Easy Setup functionality for the HCSC production environment

Specifies the values specified in the definition file when the setup is performed by using the Easy Setup functionality for the HCSC production environment.

Description

Specifies the description of the item.

Content specified in <param-value>

Specifies the contents to be set up in the <param-value> tag. Applicable only to the Easy Setup definition file (SOA.xml).

To Page Top

(2) Manager configuration file

File name

manager.cfg

Description

Specifies the common settings for the components and commands to be operated in Management Server and Administration Agent respectively.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
com.cosminexus.manager.log.dir#	<Manager installation directory>\log	--	Specifies the Manager log output directory.

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
com.cosminexus.manager.log.compatible	true	false	Specifies the upward compatibility of Manager log.

To Page Top

(3) Administration Agent property file

File name

adminagent.properties

Description

Specifies the settings related to Administration Agent.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
adminagent.adapter.port#	20295	20295	Specifies the port number used by Administration Agent. Must match the value of <agent-port> under <host> in the Easy Setup definition file (SOA.xml).
adminagent.snapshotlog.log_dir#	<directory specified in com.cosminexus.manager.log.dir of manager.cfg >\snapshot	--	Specifies the snapshot log output destination directory as a character string.
adminagent.j2ee.watch.interval	10	10	Specifies the operation confirmation interval for J2EE servers in seconds.
adminagent.hws.watch.interval	10	10	Specifies the operation confirmation interval for HTTP Server in seconds.
adminagent.j2ee.watch.retry_count	1	1	Specifies the retry count when the operation confirmation processing fails during the confirmation of J2EE server operations.
adminagent.hws.watch.retry_count	1	1	Specifies the retry count when the operation confirmation processing fails during the confirmation of HTTP Server operations.
adminagent.j2ee.watch.start_time	45	45	Specifies the time period from the execution of the start command to the start of operation confirmation when the J2EE server is started, in seconds.
adminagent.hws.watch.start_time	0	0	Specifies the time period from the execution of the start command to the start of operation confirmation when HTTP Server is started, in seconds.
adminagent.j2ee.watch.timeout	60	60	Specifies the time until timeout during the confirmation of J2EE server operations, in seconds.
adminagent.hws.watch.timeout	60	60	Specifies the time until timeout during the confirmation of HTTP Server operations, in seconds.

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
adminagent.adapter.allowedHosts	--	localhost	Specifies the host name or IP address that is allowed access to the server.
adminagent.adapter.bind_host	localhost	--	Specifies the host name or IP address to be used for communication with Administration Agent.
adminagent.hws.watch.method	HEAD	OPTIONS	Specifies the HTTP method for confirming the HTTP Server operations when 2 is specified in adminagent.hws.watch.level.
adminagent.snapshotlog.num_snapshots	10	4	Specifies the number of snapshot log files for each logical server, collected as primary data.
adminagent.snapshotlog.listfile.2.num_snapshots	10	4	Specifies the number of snapshot log files for each logical server, collected as secondary data.
adminagent.j2ee.process.console_log.enabled	false	true	Specifies whether to output the console output information of a J2EE server to the console log.

Legend:

-: None

To Page Top

(4) Management Server environment configuration file

File name

mserver.properties

Description

Specifies the settings for the port number used by Management Server, and the operations of commands for detecting errors.

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Settings for the port number used by Management Server	webserver.connector.ajp13.port#	--	28009	Specifies the port number for internal communication of Management Server.
	webserver.connector.http.port#	--	28080	Specifies the HTTP port number for Management Server connection. This value must match the value of cmx.connect.host in the client common settings property file (cmxclient.properties), and the value of mngsvrutil.connect.host in the client common definition file (mngsvrutilcl.properties).
	webserver.shutdown.port#	--	28005	Specifies the port number for receiving the Management Server termination requests.
	ejbserver.naming.port#	28900	28900	Specifies the port number to be used for internal management by Management Server.
	webserver.connector.http.permitted.hosts#	When not defined: * When not set up: localhost	*	Specifies the host that is allowed to access Management Server and IP address or host name of the Administration Agent operating host.
Settings for operations of error detection commands	com.cosminexus.mngsvr.management.port#	28099	28099	Specifies the external connection port number for the Management Server remote management function.
	com.cosminexus.mngsvr.management.listen.port#	0	0	Specifies the port number for client connection, which is created during an external connection to the Management Server remote management function.
Settings for the HCSC operation mode	ejbserver.server.edition.settingforce	Smart	--	Specifies whether Management Server is to be used from HCSC-Manager. Smart Management Server is not used from HCSC-Manager. <Not specified> Management Server is used from HCSC-Manager. If "Smart" is specified, the settings for ejbserver.naming.port are ignored.

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Settings for operations of error detection commands	com.cosminexus.mngsvr.management.enabled	false	true	Specifies whether to enable the Management Server remote management function.
	com.cosminexus.mngsvr.management.connector.enabled	false	true	Specifies whether to enable the external connection to the Management Server remote management function.
	com.cosminexus.mngsvr.management.host	--	localhost	Specifies the host name or IP address when fixing the host of the external connection to the Management Server remote management function.
	java.rmi.server.hostname	--	localhost	Specifies the host name or IP address when fixing the host of the external connection to the Management Server remote management function.

Legend:

-: None

To Page Top

(5) Client common settings property file

File name

cmxclient.properties

Description

Specifies the default values for the common arguments of the commands provided with the Smart Composer functionality. This file is used to set up common default values for all the clients.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
cmx.apply_user#	--	SYSTEM, Administrator	Specify the user ID of the OS for the client that applies this file.
cmx.connect.host#	--	localhost: 28080	Specifies the host name and port number that is assumed when the -m option of the common arguments is omitted. This value must match the value of webserver.connector.http.port in the Management Server environment configuration file (mserver.properties), and the value of mngsvrutil.connect.host in the client common definition file (mngsvrutilcl.properties).

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
cmx.connect.userid	--	admin	Specifies the user ID that is assumed when the -u option of the common arguments is omitted.
cmx.connect.passwd	--	admin	Specifies the password that is assumed when the -p option of the common arguments is omitted.
cmx.verbose	false	true	Specify true to set the -verbose option of the common arguments as the default, and specify false to set the -noverbose option as the default.
cmx.websystem.name	--	SOA	Specifies the Web system name used when the -s option of the following commands is omitted: cmx_build_system cmx_delete_system cmx_list_model cmx_list_status cmx_resume_lb

Legend:

-: None

To Page Top

(6) Client common definition file

File name

mngsvrutilcl.properties

Description

Specifies the default values of the options for the mngsvrutil command as the common definition.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
mngsvrutil.apply_user#	--	SYSTEM,Administrator	Specifies the user who applies the client common definition file in the OS user when executing the mngsvrutil command or adapter command.
mngsvrutil.connect.host#	--	localhost: 28080	Specifies the host name and port number of Management Server specified in the -m option of the mngsvrutil command. This value must match the value of webserver.connector.http.port in the Management Server environment configuration file (mserver.properties), and the value of cmx.connect.host in the client common settings property file (cmxclient.properties).

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
mngsvrutil.connect.password	--	admin	Specifies the password to be specified in the -p option of the mngsvrutil command.
mngsvrutil.connect.userid	--	admin	Specifies the user ID to be specified in the -u option of the mngsvrutil command.
mngsvrutil.target_name	--	J2EEServer	Specifies the logical server name or host name to be specified in the -t option of the mngsvrutil command.

Legend:

-: None

To Page Top

(7) Snapshot log primary delivery target definition file

File name

snapshotlog.conf

Description

Defines the target file of primarily sent data for collecting the snapshot log. No template file is provided for this file.

File storage destination

<Service Platform installation directory>\manager\config

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Directory to be collected	%val%#	--	--	Specifies the output destination of the HCSC-Manager log file. If cscmng.log.dir is customized in cscmng.properties, the following two values must be added. If cscmng.log.dir is not customized, the log file output destination is already specified, so the values need not be added. Value with "/.+" added to the definition value in cscmng.log.dir Value with "/mmap/.+" added to the definition value in cscmng.log.dir (Example of settings) If cscmng.log.dir is D:/Home/log/Manager/HCSCManager D:/Home/log/Manager/HCSCManager/.+ D:/Home/log/Manager/HCSCManager/mmap/.+

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

None

To Page Top

(8) Snapshot log secondary delivery target definition file

File name

snapshotlog.2.conf

Description

Defines the target file of secondarily sent data for collecting the snapshot log. No template file is provided for this file.

File storage destination

<Service Platform installation directory>\manager\config

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Directory for collection	%val%#	--	--	Specifies the output destination for the backup file of HCSC-Manager. If cscmng.backup.dir is customized in cscmng.properties, the following two values must be added. If cscmng.backup.dir is not customized, the backup file output destination is already specified, so the values need not be added. Value with "/.+" added to the definition value in cscmng.backup.dir (Example of settings) If cscmng.backup.dir is D:/Home/log/Manager/HCSCManager/backup D:/Home/log/Manager/HCSCManager/backup/.+
	%val%#	--	--	Specifies the location for allocating the repository. If cscmng.repository.dir is customized in cscmng.properties, the following three values must be added. If cscmng.repository.dir is not customized, the repository allocation location is already specified, so the values need not be added. Value with "/.+" added to the definition value in cscmng.repository.dir Value with "/.+/.+" added to the definition value in cscmng.repository.dir Value with "/.+/.+/.+" added to the definition value in cscmng.repository.dir (Example of settings) If cscmng.repository.dir is D:/Home/work/Manager/HCSCManager/repository D:/Home/work/Manager/HCSCManager/repository/.+ D:/Home/work/Manager/HCSCManager/repository/.+/.+ D:/Home/work/Manager/HCSCManager/repository/.+/.+/.+

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

None

To Page Top

(9) Server definition file (SOAP Communication Infrastructure)

File name

c4websv.cfg

Description

Specifies the information required for server-side operations on SOAP Communication Infrastructure.

Items to be edited

None

Items for which values different from default values are specified

None

To Page Top

(10) Common definition file (SOAP Communication Infrastructure)

File name

c4webcom.cfg

Description

Specifies the information required for the common server and client operations on SOAP Communication Infrastructure.

Items to be edited

None

Items for which values different from default values are specified

Category	Item name	default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Log settings	c4web.logger.aplog_error_record	NONE	ALL	Specifies the settings for the output of application log when an error occurs.

To Page Top

(11) HCSC-Manager definition file

File name

cscmng.properties

Description

Specifies the information required for HCSC-Manager operations.

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Repository settings	cscmng.repository.root#	<Service Platform installation directory>\CSC\repository	--	Specifies the root directory of the repository with the absolute path.
Log settings	cscmng.log.dir#	<Service Platform installation directory>\CSC\log\manager	--	Specifies the log output destination directory with the absolute path.
Environment backup	cscmng.envbackup.dir#	Current directory	--	Specifies the output destination directory for the environment backup file when the environment is backed up with cscenvbackup.

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Settings for HCSC server operation	cscmng.server.HCSC.system	--	WebServer,PRF	Specifies the logical servers to be managed in the HCSC system.

Legend:

-: None

To Page Top

(12) HCSC-Manager command definition file

File name

csccmd.properties

Description

Specifies the default values for the command options used with Service Platform.

Items to be edited

None

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Common command definitions	csc.all.user	--	admin	Specifies the default values for the arguments common to all the commands.
	csc.all.pass	--	admin
csccompoconfig common definitions	csc.compoconfig.operation	--	get
	csc.compoconfig.csc	--	HCSC
csccompodeploy common definitions	csc.compodeploy.csc	--	HCSC
csccompostart common definitions	csc.compostart.csc	--	HCSC
csccompostop common definitions	csc.compostop.csc	--	HCSC
csccompoundeploy common definitions	csc.compoundeploy.csc	--	HCSC
cscrcptnstart common definitions	csc.rcptnstart.csc	--	HCSC
cscrcptnstop common definitions	csc.rcptnstop.csc	--	HCSC
cscresinfo common definitions	csc.resinfo.csc	--	HCSC
cscstatus common definitions	csc.status.csc	--	HCSC
	csc.status.type	--	system
cscsvconfig common definitions	csc.svconfig.operation	--	get
	csc.svconfig.csc	--	HCSC
cscsvstart common definitions	csc.svstart.csc	--	HCSC
cscsvstop common definitions	csc.svstop.csc	--	HCSC
	csc.svstop.force	--	Not set up

Legend:

-: None

To Page Top

(13) HCSC server configuration definition file

File name

cscsvsetup.xml

Description

Specifies the configuration information for the HCSC server.

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Definition of manager	<port>port number of Manager</port>#	28099	28099	Specifies the port number for connecting to the remote management function of Manager. This value must match the value of com.cosminexus.mngsvr.management.port in Management Server environment configuration file (mserver.properties).

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Definition of cluster	<name>Cluster name</name>	--	Cluster	Specifies the cluster name.
Definition of manager	<name>Manager name</name>	--	Manager	Specifies the HCSC-Manager-specific distinguished name used by HCSC-Manager to identify Manager.
	<ip-address>IP address of Manager</ip-address>	--	localhost	Specifies the IP address where Management Server is started.
	<id>Management User ID of Manager</id>	--	admin	Specifies the Management User ID of Management Server.
	<password>Management User password of Management Server</password>	--	admin	Specifies the Management User password of Management Server.
Definition of csc-server	<name>HCSC server name</name>	--	HCSC	Specifies the HCSC server name.
	<j2ee-server-name>Name of J2EE server that sets up the HCSC server </j2ee-server-name>	--	J2EEServer	Specifies the name of the J2EE server where HCSC server is set up.
	<setup-properties>HCSC server setup definition file name</setup-properties>	--	cscsvsetup.properties	Specifies the name of the HCSC server setup definition file with the relative path, or absolute path.
Definition of soap-reception	<ip-address> IP address of %Web server</ip-address>	--	localhost	Specifies the IP address where the Web server is running.
	<port>Port number of %Web server</port>	--	80	Specifies the reception port number of the Web server.
	<protocol>Protocol type</protocol>	--	http	Specifies the Web server reception protocol.

Legend:

-: None

To Page Top

(14) HCSC server setup definition file

File name

cscsvsetup.properties

Description

Specifies the contents that can be set up when the HCSC server is set up.

Items to be edited

None

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Related to setup configuration	db-use	--	OFF	Specifies whether to use a database with HCSC server.
	rm-use	--	OFF	Specifies whether to use Reliable Messaging with HCSC server.
Related to standard receptions	request-ejb	--	OFF	Specifies whether to use the standard synchronous reception (SessionBean).
	request-soap	--	ON	Specifies whether to use the standard synchronous reception (Web service).
	request-jms	--	OFF	Specifies whether to use the standard asynchronous reception (MDB (WS-R)).
	request-dbq	--	OFF	Specifies whether to use the standard asynchronous reception (MDB and (DB queue)).
Related to user-defined receptions	request-userdef-soap	--	ON	Specifies whether to use SOAP receptions.

Legend:

-: None

To Page Top

(15) HCSC server runtime definition file

File name

cscsvconfig.properties

Description

Specifies the post-setup HCSC server definition information from HCSC-Manager.

Items to be edited

None

Items for which values different from default values are specified

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Data transformation	xmltelegram-namespace-complement	--	ON	Specifies whether to complement the name space declaration corresponding to the name space prefix specified for the attribute values in an XML message for the XML messages flowing in the HCSC server.

Legend:

-: None

To Page Top

(16) User-defined reception runtime definition file

File name

cscurcptnconfig_id.properties

Description

Specifies the SOAP reception information.

When using the user-defined reception runtime definition file, change the file name to "cscurcptnconfig_<reception ID>.properties" and then execute the file. If the reception ID is "rcp1", change the file name to "cscurcptnconfig_rcp1.properties" and then execute. Note that if you want to change multiple SOAP receptions, create multiple files for each SOAP reception.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
user-defined-reception-soap.threads.maximum#	10	20	Specifies the maximum number of concurrent executions of the SOAP reception.
user-defined-reception-soap.exclusive.threads#	0	0	Specifies the number of dedicated threads of the SOAP reception.
user-defined-reception-soap.queue-size#	8192	10	Specifies the pending queue size of the SOAP reception.

Note#

Items to be edited during tuning.

Items for which values different from default values are specified

None

To Page Top

(17) Service-information change definition file

File name

cscadpconfig.properties

Description

Specifies the changes in the service information for the service adapter.

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Service information of the SOAP adapter	Cluster.<service ID>.WebService.url#1	Value specified during service adapter development	--	Specifies the URL to be used for invoking a service component.
	Cluster.<service ID>.WebService.c4web.application.socket_read_timeout#2	300	--	This item is used in SOAP 1.1 mode. Specifies the read timeout value for the service adapter socket in seconds.
	Cluster.<service ID>.WebService.com.cosminexus.csc.request.timeout#2	300	--	This item is used in SOAP 1.1/1.2 combined mode. This item specifies in seconds the read timeout value for the socket of the service adapter.

Legend:

-: None

Note#1

There are items to be edited during setup.

Note#2

Items to be edited during tuning.

Items for which values different from default values are specified

None

To Page Top

(18) Easy Setup definition file

File name

SOA.xml

Description

Defines the Web system.

Items to be edited

Category	Parameters to be specified in <param-name>	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Content specified in <param-value>
Service unit definition/ HTTP Server definition/ common configuration definitions for logical servers	mstartup.force.watchtime	60	60	Specifies the forced-stop monitoring time for the logical servers in seconds.
	mstartup.restartcnt	1	1	Specifies the auto-restart count for the logical servers.
	mstartup.retrywait	60	60	Specifies in seconds the interval at which the logical server automatically attempts to restart.
	mstartup.start.watchtime	60	60	Specifies in seconds the time before the logical server start monitoring times out.
	mstartup.watchtime	60	60	Specifies in seconds the time before the logical server stop monitoring times out.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ Web server definitions	Listen#1	--	80	Specifies the IP address and port number that receives the request.
	ThreadsPerChild#2	40	50	Specifies the number of server threads to be started.Specify this definition only in Windows.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ redirector operation definition for HTTP Server	JkLogFileDir#1	logs	--	Specifies the log file output destination directory. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
	JkTraceLogFileDir#1	logs	--	Specifies the output destination directory for maintenance trace log files. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ worker definition	worker.default.cachesize#2	64	40	Specifies the number of worker connections that are reused by the redirector. Specify this definition only in Windows.
	worker.default.port#1	--	8007	Specifies the worker port number. This value must match the value of webserver.connector.ajp13.port in the Easy Setup definition file (SOA.xml).
	worker.default.receive_timeout#2	3600	3600	Specifies the communication timeout value in seconds.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ HTTP Server log output definition	CustomDivideFileNum#1	8	8	Specifies the number of divided log files.
	HttpsdLogFileDir#1	logs	--	Specifies the output destination directory for the log output by the Web server. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
Service unit definition/ J2EE server definition/ common configuration definitions for logical servers	mstartup.force.watchtime	--	60	Specifies the forced-stop monitoring time of the logical server in seconds.
	mstartup.restartcnt	--	1	Specifies the auto-restart count of the logical server.
	mstartup.retrywait	--	60	Specifies the auto-restart retry interval of the logical server in seconds.
	mstartup.start.watchtime	--	600	Specifies the start monitoring time for logical servers in seconds.
	mstartup.watchtime	--	60	Specifies the stop monitoring time of the logical servers in seconds.
	user.env.variable	--	Not set	Specifies the environment variables for starting the server.
	JAVACOREDIR=%val%#1	--	--	Specifies the output destination for the JavaVM thread dump. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.http	ejbserver.http.port#1	28008	8080	Specifies the port number of the port used for the management server.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.management	ejbserver.management.JVM.stats_monitor.FullGCCount.interval	600	600	Specifies the threshold value monitoring interval, in the monitoring of the full garbage collection frequency, in seconds.
	ejbserver.management.JVM.stats_monitor.FullGCCount.threshold	10	10	Specifies the frequency that forms the threshold value, in the monitoring of the full garbage collection frequency.
	ejbserver.management.statistics.interval	60	60	Specifies the statistics collection interval in seconds.
	ejbserver.management.stats_file.dir#1	<work directory>\ejb\<server name>\stats	--	Specifies the output destination directory of the statistics file. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
	ejbserver.management.stats_file.num#1	7	8	Specifies the number of statistics files.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.naming	ejbserver.naming.port#1	900	900	Specifies the port of the CORBA Naming Service that the J2EE server uses as a naming service.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.rmi	ejbserver.rmi.naming.port#1	23152	23152	Specifies the port number of the RMI registry used by the J2EE server.
	ejbserver.rmi.remote.listener.port#1	23550	23550	Specifies the port for receiving requests when statistics is collected by a JMX client (such as Administration Agent, JP1/Performance Management - Agent Option for uCosminexus Application Server).
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.watch	ejbserver.watch.defaultRequestQueue.threshold	80	80	Specifies the threshold value that outputs an alert message.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/user property/ parameters beginning with vbroker	vbroker.se.iiop_tp.scm.iiop_tp.listener.port#1	0	0	Specifies the communication port to be set up for each J2EE server.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with webserver.connector	webserver.connector.ajp13.max_threads#2	10	20	Specifies the number of concurrent executions for the Web container to process requests.
	webserver.connector.ajp13.port#1	8007	8007	Specifies the port number to be used for communication with the Web server. This value must match the value of worker.default.port in Easy Setup definition file (SOA.xml).
Service unit definition, J2EE server definition, J2EE server configuration definition, or Java VM start option definition	-Xms%val%#2	256m	1024m	Specifies the initial Java heap size.
	-Xmx%val%#2	512m	1024m	Specifies the maximum Java heap size.
	-XX:MetaspaceSize=%val%#2	128m	128m	Specifies the initial size of Metaspace area.
	-XX:MaxMetaspaceSize=%val%#2	128m	128m	Specifies the maximum size of Metaspace area.
	ejb.public.directory#1	<work directory>\ejb\<server name>\logs	--	Specifies the work directory of the J2EE server. The J2EE server is started, considering the specified directory as the work directory. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
	ejb.server.log.directory#1	<work directory>\ejb\<server name>\logs	--	Specifies the log file output destination directory. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
Service unit definition/ PRF definition/ common configuration definitions for logical servers	mstartup.force.watchtime	600	60	Specifies the forced-stop monitoring time for logical servers in seconds.
	mstartup.restartcnt	1	1	Specifies the auto-restart count for logical servers.
	mstartup.retrywait	0	0	Specifies the auto-restart retry interval for logical servers in seconds.
	mstartup.start.watchtime	60	60	Specifies the start monitoring time for logical servers in seconds.
	mstartup.watchtime	600	600	Specifies the stop monitoring time for logical servers in seconds.
Service unit definition/ PRF definition/ PRF configuration definition	prfspool#1	&{cosminexus.home}/PRF/spool	--	Specifies the PRF trace output directory. In Windows, use "\" as the path separation character. Note that forward slash (/) cannot be specified.
Host definition	--	20295	20295	Specifies the Administration Agent port number in <agent-port>#1#3 under <host>. This value must match the value of adminagent.adapter.port in the Administration Agent property file (adminagent.properties).

Legend:

-: None

Note#1

There are items to be edited during setup.

Note#2

Items to be edited during tuning.

Note#3

Specified in the tag mentioned in the table and not in <param-value>.

Items for which values different from default values are specified

Category	Parameters specified in <param-name>	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Content specified in <param-value>
Web system definition	--	--	SOA	Specifies the name for identifying the Web system in <name># under <web-system>.
Physical tier definition	--	--	combined-tier	Specifies the type of physical tier in <tier-type># under <tier>.
Service unit definition	--	--	Unit	Specifies the name for identifying the service unit, in <name># under <unit>.
	--	--	localhost	Specifies the host name set in <name-name> in the host definition, the host name defined in the already set up Web system, or @myhost, in <host-ref># under <unit>.
	--	--	combined-tier	Specifies the type of physical tier to which the host specified in <host-ref> belongs, in <hosts-for># under <unit>.
Service unit definition/ HTTP Server definition	--	cmx_<Web system name>_<service unit name>_<type>_<serial number>	WebServer	Specifies the name for identifying the logical server or cluster, in <logical-server-name># under <define-server>.
	--	--	web-server	Specifies the type of logical server defining the configuration, in <logical-server-type># under <define-server>.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ Web server definitions	KeepAliveTimeout	15	3	Specifies the request waiting time for a KeepAlive connection in seconds.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ redirector operation definition for HTTP Server	JkMount	/* [J2EE server name] (for combined-tier and http-tier)	/* default	Specifies the URL pattern which is to be transmitted to the Web container, during a request to HTTP Server.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ worker definition	worker.default.type	--	ajp13	Specifies the worker type.
	worker.default.host	--	localhost	Specifies the host name or IP address of the worker.
	worker.list	--	default	Specifies the list of worker names.
Service unit definition/ HTTP Server definition/ configuration definition for HTTP Server/ HTTP Server log output definition	HttpsdErrorMethod	Div	Wrap	Specifies the error log output format.
	HttpsdRequestMethod	Div	Wrap	Specifies the request log output format.
Service unit definition/ J2EE server definition	--	cmx_<Web system name>_<service unit name>_<type>_<serial number>	J2EEServer	Specifies the name for identifying the logical server or cluster in <logical-server-name># under <define-server>.
	--	--	j2ee-server	Specifies the type of logical server defining the configuration, in <logical-server-type># under <define-server>.
Service unit definition/ J2EE server definition/ common configuration definitions for logical servers	mstartup.no	--	80	Specifies an integer as the order for starting the servers during a batch start operation.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.ext	ejbserver.ext.method_observation.interval	--	10	Specifies whether to use the functionality for monitoring the business application execution time. Also, specifies the time interval for monitoring whether a running request has timed out, and the time interval for canceling a timed out request (method), in seconds.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.jndi	ejbserver.jndi.global.enabled	true	false	Specifies whether to register an object with the Portable Global JNDI name for the naming service, when the application starts.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.manager	ejbserver.manager.agent.MEventAgent.enabled	true	false	Specifies whether to enable the Management event issuing functionality.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.rmi	ejbserver.rmi.naming.host	--	localhost	Specifies the host name or IP address of the RMI registry to be used as the service provider by J2EE server, in a multi-homed host environment.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with ejbserver.server	ejbserver.server.threaddump.filenum	256	4	Specifies the maximum number of thread dump files to be used when the J2EE server detects an error and voluntarily outputs a thread dump.
Service unit definition, J2EE server definition, J2EE server configuration definition, user properties, parameters whose names begin with manager	manager.j2ee.compat	none	V9	Specifies the J2EE server compatibility mode. The operation mode required by the HCSC server is V9 compatibility mode.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ user properties/ parameters beginning with webserver.connector	webserver.connector.ajp13.bind_host	--	localhost	Specifies the IP address or host name to be used for Web server integration.
Service unit definition, J2EE server definition, J2EE server configuration definition, Java VM start option definition	add.jvm.arg	--	+	Specifies the output format of the extended verbosegc information in -XX:%val%HitachiCommaVerboseGC.
		--	+	Specifies whether to use the Explicit Memory Management functionality in -XX:%val%HitachiUseExplicitMemory.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ JavaVMsystem property	ejbserver.container.security.disabled	false	true	Specifies whether to enable the Enterprise Bean access control functionality.
	ejbserver.ctm.enabled	true	false	Specifies whether to use the CTM functionality.
	ejbserver.rmi.stateless.unique_id.enabled	false	true	Specifies whether invocation is not needed for the invocation of the remove method of Stateless Session Bean.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ Extension parameter of J2EE container	add.class.path	--	&lt;cosminexus.home&gt;\c4web\lib\hitsaaj.jar	In SOAP 1.1 mode: Specifies the SOAP Communication Infrastructure as the communication base.
			&lt;cosminexus.home&gt;\jaxws\lib\cjjaxws.jar	In SOAP 1.1/1.2 combined mode: This item specifies the JAX-WS engine as the communication infrastructure.
Service unit definition/ J2EE server definition/ J2EE server configuration definition/ SecurityManager	use.security	true	false	Specifies whether to use SecurityManager in the J2EE server startup options.
Service unit definition/ PRF definition	--	cmx_<Web system name>_<service unit name>_<type>_<serial number>	PRF	Specifies the name for identifying the logical server or cluster, in <logical-server-name># under <define-server>.
	--	--	performance-tracer	Specifies the type of logical server defining the configuration, in <logical-server-type># under <define-server>.
Service unit definition/ PRF definition/ common configuration definitions for logical servers	mstartup.no	0	0	Specifies the order for starting the servers during a batch start operation.
Service unit definition/ PRF definition/ PRF configuration definition	PrfTraceLevel	STANDARD	00030000	Specifies the trace collection level of the performance tracer.
Host definition	--	--	localhost	Specifies the name or IP address for identifying the server, in <host-name># under <host>.
	--	Value specified in <host-name>	localhost	Specifies the host name or IP address of Administration Agent in <agent-host># under <host>.

Legend:

-: None

Note#

Specified in the tag mentioned in the table and not in <param-value>.

To Page Top

(19) HTTP Server definition file

File name

httpsd.conf

Description

Specifies the information required for HTTP Server operations. After performing setup by using the Easy Setup functionality for the HCSC production environment, change the file directly, as and when required before you start HTTP Server.

File storage destination

<Service Platform installation directory>\httpsd\servers\HWS_WebServer\conf

Items to be edited

Category	Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
Host that is permitted to connect to Web server	<Location %val%>#	--	/	Specified to define a directive for the requests to a location indicated by a specific URL.
	Order %val%#	--	deny,allow	Specifies the evaluation order for setting up the Allow directive and Deny directive.
	Deny from %val%#	--	all	Specified to control the clients that can access the Web server.
	Allow from %val%#	--	localhost	Specified to control the clients that can access the Web server.

Legend:

-: None

Note#

There are items to be edited during setup.

Items for which values different from default values are specified

None

To Page Top

(20) cscsetup command definition file

File name

cscsetup.properties

Description

Specifies the information required for the operations of the cscsetup command. This definition file is only enabled in UNIX.

Items to be edited

Item name	Default value	Values specified in the Easy Setup functionality for the HCSC production environment	Description
owner#1#2	Superuser	--	Specifies the owner to be set up in Component Container Administrator.
group#1#2	Superuser	--	Specifies the group to be set up in Component Container Administrator.

Legend:

-: None

Note#1

There are items to be edited during setup.

Note#2

If the owner and group values are not specified, execute setup and unsetup with the following information.

Table 3‒33:  Set values when the owner and group values are not specified

OS	File owner	Group name
Linux	root	root
AIX	root	system

To Page Top