23.5 Messages beginning with KH

This section describes the messages beginning with KH.

• KH00001

  File does not exist: aa....aa

  aa....aa: File name

  Description

  The requested file cannot be found.

  The status code 404 Not Found will be returned to the client, and the request processing will be interrupted.

  Action

  Revise the requested file name.

• KH00002

  file permissions deny server access: aa....aa

  aa....aa: File name

  Description

  There is no permission to access the required file.

  The status code 403 Forbidden will be returned to the client, and the request processing will be interrupted.

  Action

  Revise the requested file according to the detailed information shown in this message.

• KH00004

  Child: Graceful exit event signaled. Child process is ending.

  Description

  The planned termination event was reported to the server process.

  The planned termination processing of the server process will start.

• KH00005

  Child: Unable to retrieve the graceful exit event from the parent

  Description

  The planned termination event handle of the server process could not be acquired.

  The server process terminates.

  Action

  Revise the specification according to the detailed information returned by the ReadFile() function shown in this message.

• KH00006

  Parent: Unable to duplicate the graceful exit event handle for the child

  Description

  The planned termination event handle of the server process could not be duplicated.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information returned by the DuplicateHandle() function shown in this message.

• KH00007

  Parent: Unable to send the graceful exit event handle to the child

  Description

  The planned termination event handle could not be sent to the server process.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00008

  Parent: Could not create graceful exit event for child process

  Description

  An attempt to generate a planned termination for the server process has failed.

  The generation of the server process will now stop.

  Action

  Revise the specification according to the detailed information returned by the CreateEvent() function shown in this message.

• KH00009

  Parent: Received graceful stop signal -- Shutting down the server gracefully.

  Description

  The planned termination event was reported to the control process.

  The Web server starts the planned termination processing.

• KH00010

  ResetEvent(graceful_stop_event)

  Description

  The control process failed to release the planned termination event.

  The planned termination processing of the Web server will continue.

  Action

  Revise the specification according to the detailed information returned by the ResetEvent() function shown in this message.

• KH00011

  Parent: SetEvent for child process aa....aa failed

  aa....aa: Handle value

  Description

  The control process has failed to set up a planned termination event for the server process.

  The planned termination processing of the Web server will continue.

  Action

  Revise the specification according to the detailed information returned by the SetEvent() function shown in this message.

• KH00012

  Parent: Child process exited successfully.

  Description

  The server process ended successfully.

  The Web server continues the planned termination processing.

• KH00013

  Parent: Received shutdown signal -- Shutting down the server.

  Description

  The termination event was reported to the control process.

  The Web server starts the termination processing.

• KH00014

  ResetEvent(shutdown_event)

  Description

  The control process failed to release the termination event.

  The Web server continues the termination processing.

  Action

  Revise the specification according to the detailed information returned by the ResetEvent() function shown in this message.

• KH00015

  Parent: Forcing termination of child process aa....aa

  aa....aa: Handle number

  Description

  The control process will forcibly terminate the server process that does not terminate with the specified planned termination event.

  The Web server continues the planned termination processing.

  Action

  Revise the cause due to which the server process does not terminate.

• KH00016

  Parent: Cannot create graceful stop event aa....aa

  aa....aa: Event object name

  Description

  The control process has failed to generate an event for planned termination.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information returned by the CreateEvent() function shown in this message.

• KH00018

  Parent: Failed to create the child process.

  Description

  An attempt to generate the server process has failed.

  The generation of the server process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00019

  Parent: Failed to create the child process.

  Description

  An attempt to generate the server process has failed.

  The generation of the server process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00020

  Unknown Transfer-Encoding aa....aa

  aa....aa: Header value

  Description

  The value specified in the Transfer-Encoding header is invalid.

  The status code 501 Method Not Implemented will be returned to the client, and the request processing will be interrupted.

  Action

  Other than chunked is specified in the Transfer-Encoding header. Revise the Transfer-Encoding header.

• KH00021

  Invalid Content-Length

  Description

  The length specified in the Content-Length header is invalid.

  The status code 400 Bad Request will be returned to the client, and the request processing will be interrupted.

  Action

  You can only specify a numeric value (decimal number) in the Content-Length header. Revise the specified value.

• KH00022

  aa....aa with body is not allowed for bb....bb

  aa....aa: Method

  bb....bb: Requested URI value

  Description

  Body is specified for a method for which the body is not allowed.

  The status code 413 Request Entity Too Large will be returned to the client, and the request processing will be interrupted.

  Action

  To allow a TRACE method to which the request body is added, specify extended in the TraceEnable directive. However, a request cannot be received if the request body size exceeds 64 KB.

• KH00025

  Child: Unable to retrieve the parent process handle from the parent

  Description

  The process handle of the control process could not be acquired from the control process.

  The server process terminates.

  Action

  Revise the specification according to the detailed information returned by the ReadFile() function shown in this message.

• KH00026

  Parent: Unable to duplicate the parent process handle for the child

  Description

  The process handle of the control process could not be duplicated.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information returned by the DuplicateHandle() function shown in this message.

• KH00027

  Parent: Unable to send the parent process handle to the child

  Description

  The process handle of the control process could not be sent to the server process.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00028

  Child: Parent process exited. Child process is ending.

  Description

  The termination of the control process was detected.

  The termination processing of the server process will start.

• KH00029

  Parent: the child process exited before starting initialization.

  Description

  The server process terminated before the initialization processing was started.

  The Web server stops the start processing.

  Action

  Revise according to the cause of error described in messages output other than this message.

• KH00030

  Parent: WaitForMultipleObjects failed.

  Description

  The control process failed to await the initialization processing start event of the server process.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information returned by the WaitForSingleObject() function shown in this message.

• KH00031

  the service control dispatcher terminated before completing initialization of the service.

  Description

  The service control dispatcher thread terminated before the service initialization processing was complete.

  The startup processing of the service stops.

  Action

  Revise according to the cause of error described in messages output other than this message.

• KH00032

  service initialization wait timed out.

  Description

  A timeout occurred when the service startup process was awaiting the service initialization processing completion event.

  The startup processing of the service stops.

  Action

  Revise according to the cause of error described in messages output other than this message.

• KH00033

  WaitForMultipleObjects failed.

  Description

  The service startup process failed to await the service initialization processing completion event.

  The startup processing of the service stops.

  Action

  Revise the specification according to the detailed information returned by the WaitForSingleObject() function shown in this message.

• KH00034

  Parent aa....aa: Using config file "bb....bb"

  aa....aa: Control process ID

  bb....bb: Config file name

  Description

  The process ID of the control process, and the configuration file name used in the startup processing is displayed.

  The Web server continues the startup processing.

• KH00035

  Parent aa....aa: Using config file "bb....bb"

  aa....aa: Control process ID

  bb....bb: Config file name

  Description

  The process ID of the control process, and the configuration file name used in the startup processing is displayed.

  The Web server continues the startup processing.

• KH00037

  The HWS trace could not open the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  The file described in the aa....aa specified in the HWSTraceLogFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00038

  The HWS trace output the log of the process (pid=aa....aa) into the file bb....bb specified in the HWSTraceLogFile.

  aa....aa: Process ID

  bb....bb: File name

  Description

  The contents of the shared memory of the process described in the aa....aa were output in the file described in bb....bb specified in the HWSTraceLogFile directive.

  The output in the file is terminated successfully, and the processing is continued.

• KH00039

  The HWS trace could not write the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  An attempt to output the contents of the shared memory to the file specified in the HWSTraceLogFile directive failed.

  The output process will now stop.

• KH00040

  The HWS trace could not write the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  An attempt to output the contents of the shared memory to the file specified in the HWSTraceLogFile directive failed.

  The output process will now stop.

• KH00043

  Couldn't start RequestLog process 'aa....aa'.

  aa....aa: Value specified in the HWSRequestLog directive

  Description

  An attempt to generate a process for the output of the request log has failed.

  The Web server stops the start processing.

  Action

  Revise the HWSRequestLog directive according to the detailed information shown in this message.

• KH00044

  httpsd: Invalid request log path aa....aa.

  aa....aa: File name

  Description

  The file path specified in the HWSRequestLog directive is invalid.

  The Web server stops the start processing.

  Action

  Revise the HWSRequestLog directive according to the detailed information shown in this message.

• KH00045

  httpsd: could not open request log file aa....aa.

  aa....aa: File name

  Description

  The request log file could not be opened.

  The Web server stops the start processing.

  Action

  Revise the HWSRequestLog directive according to the detailed information shown in this message.

• KH00046

  Graceful stop requested, doing graceful stop

  Description

  The planned termination of the Web server was requested. The planned termination processing will start.

• KH00047

  caught SIGUSR2, shutting down

  Description

  The Web server stopped due to reception of the SIGUSR2 signal.

• KH00048

  caught SIGXCPU, shutting down

  Description

  The Web server stopped due to reception of the SIGXCPU signal.

• KH00049

  caught SIGXFSZ, shutting down

  Description

  The Web server stopped due to reception of the SIGXFSZ signal.

• KH00052

  Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting

  Description

  The server threads for processing requests are insufficient.

  The request process continues.

  Action

  Consider increasing the value of the ThreadsPerChild directive.

• KH00053

  request queue reached HWSMaxQueueSize setting, consider raising the HWSMaxQueueSize setting

  Description

  The number of requests maintained in the request queue has reached the specified value of the HWSMaxQueueSize directive.

  The processing continues. The connection of the requests from the client that are over and above the queue size will be disconnected at the Web server side.

  Action

  Consider increasing the value of the HWSMaxQueueSize directive.

• KH00054

  Parent: aa....aa

  aa....aa: Error

  Description

  An error occurred during server process generation.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00055

  The HWS trace could not open the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  The file described in the aa....aa specified in the HWSTraceLogFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00056

  The HWS trace could not write the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  An attempt to output the contents of the shared memory to the file specified in the HWSTraceLogFile directive failed.

  The output process will now stop.

• KH00057

  The HWS trace could not write the log file aa....aa specified in the HWSTraceLogFile.

  aa....aa: File name

  Description

  An attempt to output the contents of the shared memory to the file specified in the HWSTraceLogFile directive failed.

  The output process will now stop.

• KH00058

  The HWS trace output the log of the process (pid=aa....aa) into the file bb....bb specified in the HWSTraceLogFile.

  aa....aa: Process ID

  bb....bb: File name

  Description

  The contents of the shared memory of the process described in the aa....aa were output in the file described in bb....bb specified in the HWSTraceLogFile directive.

  The output in the file is terminated successfully, and the processing is continued.

• KH00061

  QOSCookieServers is out of range

  Description

  The specified range of the QOSCookieServers directive is invalid.

  The Web server stops the start processing.

  Action

  Revise the QOSCookieServers directive value.

• KH00062

  QOSRejectionServers is out of range

  Description

  The specified range of the QOSRejectionServers directive is invalid.

  The Web server stops the start processing.

  Action

  Revise the QOSRejectionServers directive value.

• KH00063

  Could not open file: aa....aa

  aa....aa: File name

  Description

  The file specified in the QOSResponse directive cannot be opened.

  The Web server stops the start processing.

  Action

  Revise the QOSResponse directive value according to the detailed information shown in this message.

• KH00064

  Could not open file: aa....aa

  aa....aa: File name

  Description

  The file specified in the QOSResponse directive cannot be opened.

  The Web server stops the start processing.

  Action

  Revise the QOSResponse directive value according to the detailed information shown in this message.

• KH00065

  Could not open file: aa....aa

  aa....aa: File name

  Description

  The file specified in the QOSResponse directive cannot be opened.

  The Web server stops the start processing.

  Action

  Revise the QOSResponse directive value according to the detailed information shown in this message.

• KH00066

  This file is too large: aa....aa

  aa....aa: File name

  Description

  The file specified in the QOSResponse directive cannot be read because it is too big.

  The Web server stops the start processing.

  Action

  Specify a file smaller than 4,294,967,295 bytes.

• KH00067

  Could not read file: aa....aa

  aa....aa: File name

  Description

  The file specified in the QOSResponse directive cannot be read.

  The Web server stops the start processing.

  Action

  Revise the QOSResponse directive value according to the detailed information shown in this message.

• KH00069

  Request rejected (service temporarily unavailable)

  Description

  The request processing was denied.

  The request process will now stop.

• KH00324

  The HWS trace could not open the ID file aa....aa specified in the HWSTraceIdFile.

  aa....aa: File name

  Description

  The file specified in the aa....aa described in the HWSTraceIdFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00325

  The HWS trace could not obtain the shared memory identifier from the file aa....aa specified in the HWSTraceIdFile.

  aa....aa: File name

  Description

  The shared memory identifier cannot be obtained from the file described in the aa....aa specified in the HWSTraceIdFile directive.

  The process continues.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00326

  The format of the shared memory identifier specified in the HWSTraceIdFile is invalid.

  Description

  The format of the shared memory identifier of the file specified in the HWSTraceIdFile directive is invalid.

  The process continues.

  Action

  Revise the shared memory identifier.

• KH00328

  HWS trace shmctl() IPC_RMID could not remove the shared memory segment(id=aa....aa).

  aa....aa: Shared memory identifier

  Description

  The shared memory cannot be deleted.

  The process continues.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00329

  The HWS trace could not open the ID file aa....aa specified in the HWSTraceIdFile.

  aa....aa: File name

  Description

  The file specified in the aa....aa described in the HWSTraceIdFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00330

  The HWS trace could not create the segment(size=aa....aa).

  aa....aa: Size

  Description

  Shared memory cannot be secured.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00331

  The HWS trace could not assign the segment(id=aa....aa).

  aa....aa: Shared memory identifier

  Description

  The shared memory cannot be assigned.

  he process will now stop.

  Action

  Revise the specification according to the detailed information about shmat() shown in this message.

• KH00332

  HWS trace shmctl() IPC_STAT could not educe the current value(id=aa....aa).

  aa....aa: Shared memory identifier

  Description

  The shared memory status for the aa....aa cannot be extracted.

  The process will now stop.

  Action

  Revise the specification according to the detailed information about shmctl() shown in this message.

• KH00333

  HWS trace shmctl() IPC_SET could not set the value(id=aa....aa), you probably need to modify User or Group directives.

  aa....aa: Shared memory identifier

  Description

  The shared memory status for aa....aa cannot be set up.

  The process will now stop.

  Action

  This error occurs when the user specified in the User directive or Group directive is not registered in the system. Revise the specified value of the User directive or Group directive.

• KH00334

  The HWS trace could not create the segment(size=aa....aa).

  aa....aa: Size (bytes)

  Description

  Shared memory cannot be secured.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00335

  The HWS trace could not map the segment(id=aa....aa) for the parent.

  aa....aa: Shared memory identifier

  Description

  The shared memory cannot be assigned to a blank.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00337

  The HWS trace could not open the ID file aa....aa specified in the HWSTraceIdFile.

  aa....aa: File name

  Description

  The file specified in the aa....aa described in the HWSTraceIdFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00338

  The HWS trace created shared memory segment #aa....aa.

  aa....aa: Shared memory identifier

  Description

  Shared memory for the internal trace was secured.

  The process continues.

• KH00340

  The HWS trace could not open the ID file aa....aa specified in the HWSTraceIdFile.

  aa....aa: File name

  Description

  The file specified in the aa....aa described in the HWSTraceIdFile directive cannot be opened.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00341

  The HWS trace could not open the segment(id=aa....aa).

  aa....aa: Shared memory identifier

  Description

  An attempt to open the shared memory has failed.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00342

  The HWS trace could not map the segment(id=aa....aa) for the child.

  aa....aa: Shared memory identifier

  Description

  The shared memory cannot be assigned to a blank.

  The process will now stop.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00349

  [client aa....aa] bb....bb:forcing termination of request "cc....cc"

  aa....aa: Client address

  bb....bb: child process process-ID, server thread thread-ID, or child process process-ID: server thread thread-ID

  cc....cc: Request line

  Description

  The request processing described in cc....cc was interrupted because the time from the receipt of the planned termination request until the forced termination has elapsed.

  The Web server interrupt the request processing and continues the termination processing.

• KH00350

  error reading response header from remote server aa....aa

  aa....aa: Host name

  Description

  An attempt to read the response header from the remote Web server failed.

  The status code 502 Bad Gateway will be returned to the client, and the request processing will be interrupted.

  Action

  Check for a message indicating that an attempt to read data from the remote Web server failed.

• KH00351

  apr_socket_opt_set(FIONBIO): Failed to set

  Description

  An error occurred when the FIONBIO option was set.

  The Web server continues the processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00352

  apr_socket_opt_set(FIONBIO): Failed to set

  Description

  An error occurred when the FIONBIO option was set.

  The Web server continues the processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00353

  Failed to set the PRFSPOOL environment variable

  Description

  An attempt to set up the PRFSPOOL environment variable failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00354

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00355

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00356

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00357

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00358

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00359

  Cannot load PRF library into server: aa....aa

  aa....aa: Detailed information

  Description

  An attempt to load the PRF library failed.

  The Web server continues the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00360

  PRF: open_service failed(aa....aa)

  aa....aa: Return code

  Description

  The PRF daemon cannot be used.

  The Web server continues the start processing.

  Action

  Make sure that the PRF daemon is running.

• KH00361

  The server did not send a status-code aa....aa response because the server already sent an error response to the client.

  aa....aa: Status code

  Description

  A status code response is not sent because an error response is already sent to the client.

• KH00362

  The server started by non-root user. User and Group directives is not used.

  Description

  The User directive and Group directive are not used because the server is started by a general user.

• KH00363

  Socket Input: timed out (aa....aa:bb....bb --> cc....cc:dd....dd)

  aa....aa: Connection destination IP address

  bb....bb: Connection destination port number

  cc....cc: IP address of the Web server

  dd....dd: Port number of the Web server

  Description

  A timeout occurred in the receipt processing executed with the client or back-end server. Any one of the following standby time periods has been exceeded:

  • Standby time when data is no longer received during the receipt of a request (receipt of HTTP protocol after establishing a connection) from the client

  • Standby time from sending a request to the back-end server until the receipt of a response, when you are using reverse proxy

  • Standby time when data is no longer received during the receipt of a response from the back-end server, when you are using reverse proxy

  Action

  This message was output because the time specified in the Timeout directive was exceeded. Revise the value specified in the directive.

• KH00364

  Socket Output: timed out (aa....aa:bb....bb <-- cc....cc:dd....dd)

  aa....aa: Connection destination IP address

  bb....bb: Connection destination port number

  cc....cc: IP address of the Web server

  dd....dd: Port number of the Web server

  Description

  A timeout occurred in the send processing executed with the client or back-end server. Any one of the following standby time periods has been exceeded:

  • Standby time when data can no longer be sent while a response is being sent to the client

  • Standby time when data can no longer be sent while a request is being sent to the back-end server, when you are using a reverse proxy

  Action

  This message was output because the time specified in the Timeout directive was exceeded. Revise the value specified in the directive.

• KH00375

  Parent aa....aa: Using config file "bb....bb"

  aa....aa: Control process ID

  bb....bb: Config file name

  Description

  The process ID of the control process, and the configuration file name used in the startup processing is displayed.

  The Web server continues the startup processing.

• KH00376

  Graceful stop requested, doing graceful stop

  Description

  The planned termination of the Web server was requested. The planned termination processing will start.

• KH00377

  caught SIGUSR2, shutting down

  Description

  The Web server stopped due to reception of the SIGUSR2 signal.

• KH00378

  caught SIGXCPU, shutting down

  Description

  The Web server stopped due to reception of the SIGXCPU signal.

• KH00379

  caught SIGXFSZ, shutting down

  Description

  The Web server stopped due to reception of the SIGXFSZ signal.

• KH00380

  The server started by non-root user. User and Group directives is not used.

  Description

  The User directive and Group directive are not used because the server is started by a general user.

• KH00382

  child process aa....aa still did not exit, sending a SIGKILL

  aa....aa: Process ID

  Description

  The SIGKILL signal will be sent because the server process specified in the aa....aa has not terminated. The Web server continues the termination or restart processing.

• KH00383

  Couldn't start websocket log process 'aa....aa'.

  aa....aa: Value specified in the HWSWebSocketLog directive

  Description

  An attempt to generate a process used to output WebSocket log data failed.

  The Web server stops the start processing.

  Action

  Revise the HWSWebSocketLog directive according to the detailed information shown in this message.

• KH00384

  httpsd: Invalid websocket log path aa....aa.

  aa....aa: File name

  Description

  The file path specified in the HWSWebSocketLog directive is invalid.

  The Web server stops the start processing.

  Action

  Revise the HWSWebSocketLog directive according to the detailed information shown in this message.

• KH00385

  httpsd: could not open websocket log file aa....aa.

  aa....aa: File name

  Description

  The WebSocket log file could not be opened.

  The Web server stops the start processing.

  Action

  Revise the HWSWebSocketLog directive according to the detailed information shown in this message.

• KH00415

  An attempt to acquire the path of the audit log library has failed.

  Description

  An attempt to acquire the path of the library for the audit log output has failed.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00416

  An attempt to load the audit log library has failed.

  Description

  An attempt to load the library for the audit log output has failed.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00417

  An attempt to acquire the address of the audit log function has failed.

  Description

  An attempt to acquire the address of the function of library for the audit log output has failed.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00418

  An attempt to acquire the path of the audit log library has failed.

  Description

  An attempt to acquire the path of the library for the audit log output has failed.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00419

  An attempt to acquire the address of the audit log function has failed.

  Description

  An attempt to acquire the address of the function of library for the audit log output has failed.

  The Web server stops the start processing.

  Action

  Revise the specification according to the detailed information shown in this message.

• KH00420

  server reached MaxClients setting, consider raising the MaxClients setting

  Description

  The number of server processes has reached the value set up in the MaxClients directive. Consider increasing the value specified in the MaxClients directive. If the value specified in the MaxClients directive is exceeded, the server process will not be generated.

  Action

  Revise the value specified in the MaxClients directive. To generate as many idle server processes as specified in the MinSpareServers directive, the value specified in the MaxClients directive must be increased.

• KH00421

  MaxClients can't be changed by restart. Original was used

  Description

  The MaxClients directive cannot be changed during restart with graceful or restart.

  The MaxClients directive value at the time of startup of the Web server will be set up, and the restart processing will continue.

  Action

  Do not change the MaxClients directive value during restart.

• KH00422

  WARNING: MaxClients of aa....aa exceeds compile time limit of

  bb....bb servers, decreasing MaxClients to bb....bb.

  aa....aa: MaxClients directive value

  bb....bb: Maximum limit

  Description

  The MaxClients directive value exceeds the maximum limit. The Web server sets the maximum limit value for the MaxClients directive, and then continues the startup processing.

  Action

  Revise the MaxClients directive value.

• KH00423

  MaxClients of aa....aa exceeds compile time limit of 2048, decreasing to match

  aa....aa: MaxClients directive value

  Description

  The MaxClients directive value exceeds the maximum limit. The Web server sets the maximum limit value for the MaxClients directive, and then continues processing.

  Action

  Revise the MaxClients directive value.

• KH00424

  WARNING: MaxClients of aa....aa not allowed, increasing to 1.

  aa....aa: MaxClients directive value

  Description

  An invalid value is specified in MaxClients directive.

  1 will be set up for the MaxClients directive value of the Web server, and the startup processing will continue.

  Action

  Revise the MaxClients directive value.

• KH00425

  MaxClients of aa....aa not allowed, increasing to 1

  aa....aa: MaxClients directive value

  Description

  An invalid value is specified in MaxClients directive.

  1 will be set up for the MaxClients directive value of the Web server, and the startup processing will continue.

  Action

  Revise the MaxClients directive value.

• KH00426

  server reached MaxClients setting, consider raising the MaxClients setting

  Description

  The number of server threads that are processing requests reaches the MaxClients directive value. Consider increasing the MaxClients directive value. No more server processes are generated if the number of server threads exceeds the value specified in the MaxClients directive.

  Action

  Revise the value specified in the MaxClients directive.

• KH00427

  server is within MinSpareThreads of MaxClients, consider raising the MaxClients setting

  Description

  The number of idle server threads is now less than the MinSpareThreads directive value.

  Action

  Revise the value specified in the MaxClients or MinSpareThreads directive.

• KH00429

  WARNING: MaxClients of aa....aa is less than ThreadsPerChild of

  bb....bb, increasing to bb....bb. MaxClients must be at least as large

  as the number of threads in a single server.

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Value specified in the ThreadsPerChild directive

  Description

  The MaxClients directive value is smaller than the ThreadsPerChild directive value. The Web server sets the ThreadsPerChild directive value for the MaxClients directive value, and then continues the startup processing. The MaxClients directive value must be at least equal to the number of server threads belonging to one server process.

  Action

  Revise the MaxClients directive value.

• KH00430

  MaxClients of aa....aa is less than ThreadsPerChild of bb....bb, increasing to match

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Value specified in the ThreadsPerChild directive

  Description

  The MaxClients directive value is smaller than the ThreadsPerChild directive value. The Web server sets the ThreadsPerChild directive value for the MaxClients directive value, and then continues processing.

  Action

  Revise the MaxClients directive value.

• KH00431

  WARNING: MaxClients of aa....aa is not an integer multiple of

  ThreadsPerChild of bb....bb, decreasing to nearest multiple cc....cc,

  for a maximum of dd....dd servers.

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Value specified in the ThreadsPerChild directive

  cc....cc: Maximum number of concurrent connections

  dd....dd: Maximum number of server processes

  Description

  The MaxClients directive value is not an integer multiple of the ThreadsPerChild directive value. The Web server sets the MaxClients directive value that is reduced to an integer multiple of the ThreadsPerChild directive value, and then continues the startup processing.

  Action

  Revise the MaxClients directive value.

• KH00432

  MaxClients of aa....aa is not an integer multiple of ThreadsPerChild of bb....bb, decreasing to nearest multiple cc....cc

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Value specified in the ThreadsPerChild directive

  cc....cc: Maximum number of concurrent connections

  Description

  The MaxClients directive value is not an integer multiple of the ThreadsPerChild directive value. The Web server sets the MaxClients directive value that is reduced to an integer multiple of the ThreadsPerChild directive value, and then continues processing.

  Action

  Revise the MaxClients directive value.

• KH00433

  WARNING: MaxClients of aa....aa would require bb....bb servers and

  would exceed ServerLimit of cc....cc, decreasing to dd....dd.

  To increase, please see the ServerLimit directive.

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Maximum number of server processes

  cc....cc: ServerLimit directive value

  dd....dd: Maximum number of concurrent connections

  Description

  The maximum number of server processes calculated from the MaxClients and ThreadsPerChild directives exceeds the ServerLimit directive value. The Web server sets the ServerLimit directive value multiplied by the ThreadsPerChild directive value for the maximum number of concurrent connections, and then continues the startup processing.

  Action

  Revise the ServerLimit directive value.

• KH00434

  MaxClients of aa....aa would require bb....bb servers and exceed ServerLimit of cc....cc, decreasing to dd....dd

  aa....aa: Value specified in the MaxClients directive

  bb....bb: Maximum number of server processes

  cc....cc: ServerLimit directive value

  dd....dd: Maximum number of concurrent connections

  Description

  The maximum number of server processes calculated from the MaxClients and ThreadsPerChild directives exceeds the ServerLimit directive value. The Web server sets the ServerLimit directive value multiplied by the ThreadsPerChild directive value for the maximum number of concurrent connections, and then continues processing.

  Action

  Revise the ServerLimit directive value.

To Page Top