19.3 Messages from KFCT70000 to KFCT79999
This section describes the messages from KFCT70000 to KFCT79999 output by CTM and PRF.
-
KFCT70002-E
cannot open file : aa....aa
aa....aa: Name of the file that cannot be opened
- Description
-
The file aa....aa cannot be opened.
The command process will be interrupted.
- Action
-
Confirm that the file described in aa....aa exists, and that the read permission is available.
-
KFCT70003-E
invalid command argument.
- Description
-
A command argument is invalid.
The command process will be interrupted.
- Action
-
Revise the command argument.
-
KFCT70004-E
TSCDIR variable undefined.
- Description
-
The environment variable TSCDIR is not defined.
The command process will be interrupted.
- Action
-
Define the environment variable TSCDIR.
-
KFCT70322-E
not enough memory.
- Description
-
Memory is insufficient.
The command process will be interrupted.
- Action
-
Terminate other programs to secure sufficient memory, and then re-execute the command.
-
KFCT70332-E
aa....aa failed.bb....bb.
aa....aa: Name of the failed command
bb....bb: Reason for the failure (message from the command)
- Description
-
An attempt to execute an internal command has failed.
The command process will be interrupted.
- Action
-
See the information described in bb....bb, and then remove the cause of the error.
-
KFCT70450-E
the error occurred while initializing idl function. reason=aa....aa kind=bb....bb code1=cc....cc code2=dd....dd.
aa....aa: Reason for occurrence of error
bb....bb: Process type (ctmd: CTM daemon or ctmregltd: CTM regulator, ORB gateway)
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
An error occurred while initializing the daemon process.
The program startup process will be interrupted.
- Action
-
Take action based on the reasons for the error occurrence described in aa....aa, and then re-execute the command. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒1: List of causes described in KFCT70450-E Cause of error
Cause
Action
BAD_ENVIRONMENT
An attempt to acquire the environment variables has failed.
Confirm that the environment variables CTMSPOOL and CTMDIR are setup and, if necessary, revise them.
FILE_ACCESS
An attempt to access the file has failed.
Confirm that the CTMSPOOL directory exists, that you have access permissions, and also that enough free space is available on the disk and, if necessary, revise.
NO_MEMORY
Memory is insufficient.
Terminate the unnecessary processes or increase the memory.
LOCK_ERROR
An attempted exclusive control has failed.
If the memory is insufficient, terminate the unnecessary processes or increase the memory.
In other cases, contact maintenance personnel.
ACTIVATE
An attempt to activate the receive functionality has failed.
Acquire the contents of reason (aa....aa), kind (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
PORT_ALREADY_USED
A duplicate EJB request receiving port number was detected.
The EJB request receiving port number may already be in use.
You can adjust the port number with the -CTMEjbPort option.
EJBPORT
The specified ORB gateway receiving port is invalid.
If the -CTMIDLConnect option is specified, specify the -CTMEjbPort option.
INVALID_OPTION
The specified option is invalid.
Specify the -CTMAgent 1 or -CTMIDLConnect option.
INTERNAL
An internal contradiction occurred.
Acquire the contents of reason (aa....aa), kind (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
UNKNOWN
An unknown error occurred.
Acquire the contents of reason (aa....aa), kind (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
OTHER
An error other than that specified above occurred.
Acquire the contents of reason (aa....aa), kind (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
-
KFCT70451-E
the error occurred while communicating with J2EE Server. exception=aa....aa detail=bb....bb code1=cc....cc code2=dd....dd.
aa....aa: Name of the CORBA exception that occurred
bb....bb: Minor code of the CORBA exception that occurred or Completion status of the CORBA exception that occurred
If this information cannot be acquired, " - " is displayed.
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
An error occurred when communicating with the J2EE Server.
The processing of the daemon process continues.
- Action
-
See the exception (aa....aa) and detail (bb....bb) in this message, and then remove the cause of the error.
-
KFCT70452-E
the error occurred while processing aa....aa message. reason=bb....bb code1=cc....cc code2=dd....dd.
aa....aa: Message type (request: Request message to the J2EE server or reply: Reply message from the J2EE server)
bb....bb: Reason for occurrence of error
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
An error occurred while processing the request or reply message.
The processing of the daemon process continues.
- Action
-
Take action based on the reasons for the error occurrence described in bb....bb, and then re-execute the command. The following table lists the reasons for the error occurrence described in bb....bb and the corresponding actions.
Table 19‒2: List of errors described in KFCT70452-E Cause of error
Cause
Action
NO_MEMORY
Memory is insufficient.
Terminate the unnecessary processes or increase the memory.
NOT_SUPPORT_VER
A GIOP message of an unsupported version was received.
Use the appropriate versions for the pre-requisite products of the user application and the application server.
INTERNAL
An internal contradiction occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
UNKNOWN
An unknown error occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
OTHER
An error other than that specified above occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
-
KFCT70453-E
the error occurred while processing aa....aa message. exception=bb....bb detail=cc....cc reason=dd....dd code1=ee....ee code2=ff....ff.
aa....aa: Message type (request: Request message to the J2EE server or reply: Reply message from the J2EE server)
bb....bb: Name of the thrown CORBA exception
cc....cc: Minor code of the thrown CORBA exception or Completion status of the thrown CORBA exception
dd....dd: Reason for occurrence of error
ee....ee: Maintenance information 1
ff....ff: Maintenance information 2
- Description
-
An error occurred while processing the request or reply message; hence, a CORBA system exception is thrown.
The processing of the daemon process continues.
- Action
-
Take action based on the reasons for the error occurrence described in dd....dd, and then re-execute the command. The following table lists the reasons for the error occurrence described in dd....dd and the corresponding actions.
Table 19‒3: List of causes described in KFCT70453-E Cause of error
Cause
Action
NO_MEMORY
Memory is insufficient.
Terminate the unnecessary processes or increase the memory.
NOT_SUPPORT_VER
A GIOP message of an unsupported version was received.
Use the appropriate versions for the pre-requisite products of the user application and the application server.
INTERNAL
An internal contradiction occurred.
Acquire the contents of aa....aa, exception (bb....bb), detail (cc....cc), reason (dd....dd), code1 (ee....ee), code2 (ff....ff), and then contact maintenance personnel.
UNKNOWN
An unknown error occurred.
Acquire the contents of aa....aa, exception (bb....bb), detail (cc....cc), reason (dd....dd), code1 (ee....ee), code2 (ff....ff), and then contact maintenance personnel.
OTHER
An error other than that specified above occurred.
Acquire the contents of aa....aa, exception (bb....bb), detail (cc....cc), reason (dd....dd), code1 (ee....ee), code2 (ff....ff), and then contact maintenance personnel.
-
KFCT70457-E
the error occurred while getting aa....aa reference. reason=bb....bb code1=cc....cc code2=dd....dd.
aa....aa: EJB reference type (Home interface: home interface reference or EJB object: EJB object reference)
bb....bb: Reason for occurrence of error
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
An error occurred while acquiring the home interface reference or the EJB object reference.
The processing of the daemon process continues.
- Action
-
Take action based on the reasons for the error occurrence described in bb....bb, and then re-execute the command. The following table lists the reasons for the error occurrence described in bb....bb and the corresponding actions.
Table 19‒4: List of causes described in KFCT70457-E Cause of error
Cause
Action
NO_MEMORY
Memory is insufficient.
Terminate the unnecessary processes or increase the memory.
NOT_SUPPORT_VER
A GIOP message of an unsupported version was received.
Use the appropriate versions for the pre-requisite products of the user application and the application server.
INTERNAL
An internal contradiction occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
UNKNOWN
An unknown error occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
OTHER
An error other than that specified above occurred.
Acquire the contents of aa....aa, reason (bb....bb), code1 (cc....cc), code2 (dd....dd), and then contact maintenance personnel.
-
KFCT70458-E
the error occurred while propagating information of remote exception. reason=aa....aa code1=bb....bb code2=cc....cc.
aa....aa: Reason for occurrence of error
bb....bb: Maintenance information 1
cc....cc: Maintenance information 2
- Description
-
An error occurred while propagating the details of an exception thrown in the J2EE server to the EJB client.
The processing of the daemon process continues.
- Action
-
Take action based on the reasons for the error occurrence described in aa....aa, and then re-execute the command. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒5: List of causes described in KFCT70458-E Cause of error
Cause
Action
NO_MEMORY
Memory is insufficient.
Terminate the unnecessary processes or increase the memory.
LOCK_ERROR
An attempted exclusive control has failed.
If the memory is insufficient, terminate the unnecessary processes or increase the memory.
In other cases, acquire the contents of reason (aa....aa), code1 (bb....bb), code2 (cc....cc), and then contact maintenance personnel.
INTERNAL,INVALID_PARAM
An internal contradiction occurred.
Acquire the contents of reason (aa....aa), code1 (bb....bb), code2 (cc....cc), and then contact maintenance personnel.
OTHER, INVALID_STATUS, -
An error other than that specified above occurred.
Acquire the contents of reason (aa....aa), code1 (bb....bb), code2 (cc....cc), and then contact maintenance personnel.
-
KFCT70459-E
the timeout occurred while communicating with J2EE Server. time=aa....aa detail=bb....bb code1=cc....cc code2=dd....dd.
aa....aa: Timeout period (seconds)
bb....bb: Minor code of the CORBA exception that occurred or Completion status of the CORBA exception that occurred
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
A timeout occurred while communicating with the J2EE Server.
The processing of the daemon process continues.
- Action
-
See the contents of time (aa....aa) in this message, and then remove the cause of the error.
-
KFCT70460-E
command argument is invalid. option=aa....aa value=bb....bb code=cc....cc.
aa....aa: Invalid option name
bb....bb: Invalid option argument
cc....cc: Maintenance information
- Description
-
The option is invalid. The daemon processing will be interrupted.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70470-I
usage: ctmjava2idl [-h] | [-g] [-o output-file] [-c class-path] class-file.
- Description
-
This message describes the usage method of the ctmjava2idl command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70471-I
usage: ctmidl2cpp [-h] | [-TSCclient_ext ext-string] [-TSChdr_suffix hdr-suffix] [-TSCsrc_suffix src-suffix] [-client_ext ext-string] [-hdr_suffix hdr-suffix] [-src_suffix src-suffix] [-TSCroot_dir directory] [-TSCsrc_dir directory] [-TSChdr_dir directory] [-root_dir directory] [-TSCexport tag-string] [-export tag-string] [-type_code_info] [-namespace] [-gen_included_files] [[-I directory[;directory...]]...] [-A] idlfile
- Description
-
This message describes the usage method of the ctmidl2cpp command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70472-I
usage: ctmidl2j [-h] | [-package package_name][-TSCroot_dir directory][-root_dir directory] [-gen_included_files][[-I directory[;directory...]]...][-A] idlfile
- Description
-
This message describes the usage method of the ctmidl2j command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70473-E
usage: the internal error occurred. reason=aa....aa code=bb....bb.
aa....aa: Name of the process
bb....bb: Error code
- Description
-
This message is displayed when an error occurs in the internal invocation process. The command terminates with an error.
- Action
-
Confirm the following details:
-
The IDL definition file contents
-
The specification of the environment variable
If a problem does not exist in the IDL definition file and the environment variable, contact maintenance personnel.
-
-
KFCT70474-E
usage: unsupported version. code=aa....aa.
aa....aa: Acquired OTM version
- Description
-
This message is displayed when the version of OTM being used is invalid. The command terminates with an error.
- Action
-
Revise the environment specified for the environment variable TSCDIR.
-
KFCT70500-I
now starting ctmdmd.
- Description
-
The CTM domain manager is being started.
The startup process of the CTM domain manager continues.
-
KFCT70501-E
cannot start ctmdmd because another ctmdmd with the same domain name is operating. domain name = aa....aa
aa....aa: CTM domain name
- Description
-
A CTM domain manager with the same CTM domain name is running; hence, the CTM domain manager cannot be started.
The startup process of the CTM domain manager will be interrupted.
- Action
-
Wait for the running CTM domain manager to stop and restart the CTM domain manager or change the CTM domain name, and then restart the CTM domain manager.
-
KFCT70502-I
ctmdmd is now online.
- Description
-
The startup process of the CTM domain manager is complete.
The processing of the CTM domain manager continues.
-
KFCT70503-I
now terminating ctmdmd. terminate type=aa....aa
Termination type (NORMAL STOP: Normal termination or FORCE STOP: Forced normal termination)
- Description
-
The CTM domain manager is being terminated.
The processing of the CTM domain manager continues.
-
KFCT70504-I
ctmdmd stop.
- Description
-
The CTM domain manager has stopped.
-
KFCT70505-I
now starting ctmd.
- Description
-
The CTM daemon is being started.
The processing of the CTM daemon continues.
-
KFCT70506-E
cannot start ctmd because another ctmd with the same CTMID is operating in the same domain. CTMID=aa....aa
aa....aa: CTM identifier
- Description
-
A CTM daemon with the same CTM identifier is running; hence, the CTM daemon cannot be started.
The startup process of the CTM daemon will be interrupted.
- Action
-
Wait for the termination of the running CTM daemon, and then re-execute the process. Alternatively, change the CTM identifier and then restart the CTM daemon.
-
KFCT70507-E
the combination of domain name and CTMSPOOL directory is invalid.
- Description
-
The combination of the CTM domain name and CTMSPOOL is invalid.
The startup process of the CTM domain manager and the CTM daemon will be interrupted.
- Action
-
Check if the following items are applicable to the combination of the CTM domain name and CTMSPOOL:
-
The specified CTMSPOOL is already being used for a CTM domain manager with another CTM domain name.
-
The CTM domain manager with the specified CTM domain name is already being operated by using another CTMSPOOL.
If the above points are applicable to the combination, specify a valid combination again, and then restart the process. However, check the environment when starting the CTM domain manager. If the applicable CTMSPOOL directory is not used and you want to operate using a new combination, use the ctmdminfo command to delete the CTM domain information, and then restart the CTM domain manager.
-
-
KFCT70508-W
CTMSPOOL directory is not specified. $CTMDIR/spool suppose to $CTMSPOOL.
- Description
-
The environment variable CTMSPOOL is not specified.
The directories $CTMDIR/spool (in UNIX) or %CTMDIR%\spool (in Windows) will be assumed as $CTMSPOOL (in UNIX) or %CTMSPOOL% (in Windows) and the processing continues.
-
KFCT70509-E
cannot start aa....aa because of improper operational environment. reason code=bb....bb
aa....aa: CTM daemon (ctmd: CTM daemon or ctmdmd: CTM domain manager)
bb....bb: Cause of inability to start the daemon
- Description
-
The operational environment is improper; hence, the daemon process cannot be started.
The daemon startup process will be interrupted.
- Action
-
Check the causes that are described in bb....bb, and then take action.
The following causes are described in bb....bb:
- MEMORY
-
Check whether the actual memory size and swap memory size of the OS is sufficient.
- ENV_CTMDIR
-
Define the environment variable CTMDIR. Check whether CTMDIR directory can be accessed.
- ENV_CTMSPOOL
-
Check whether CTMSPOOL directory can be accessed.
-
KFCT70510-I
ctmd is now online.
- Description
-
The startup process of the CTM daemon is complete and online business can be started.
The processing of the CTM daemon continues.
-
KFCT70511-I
now terminating ctmd. terminate type=aa....aa
aa....aa: Termination type (NORMAL STOP: Normal termination or FORCE STOP: Forced termination)
- Description
-
The CTM daemon is being terminated.
The processing of the CTM daemon continues.
-
KFCT70512-I
ctmd stop.
- Description
-
The CTM daemon has stopped.
-
KFCT70513-E
command argument is invalid. option=aa....aa
aa....aa: Invalid option name
- Description
-
The specification of the command argument is invalid.
The command terminates with an error.
- Action
-
Confirm the following details:
-
Is the specified option invalid?
-
Is the option that cannot be omitted, omitted?
-
Can the specified option be specified at the same time as other options?
Modify the specified option that was invalid, specify an option with a valid combination, and then re-execute the command.
-
-
KFCT70514-I
usage:ctmstart [-h] [-CTMDomain domain_name] [-CTMID ctmid]
[-CTMPort port_no] [-CTMEjbPort port_no] [-CTMMyHost host_name]
[-CTMEntryCount count] [-CTMNice nice] [-CTMRegStart count]
[-CTMRegOption file] [-CTMEnviron file] [-CTMStartTimeOut time]
[-CTMTSCGwStart count] [-CTMTSCGwOption file]
-CTMINSRef host_name:port_number [-CTMDCSendTimeOut time]
[-CTMClientConnectCount count] [-CTMServerConnectCount count]
[-CTMLogFileSize file_size] [-CTMLogFileCount file_count]
[-PRFID cprfid] [-CTMQueueCount count] [-CTMQueueRegistCount count]
[-CTMServerCacheSize size] [-CTMDispatchPolicy normalDispatch | priorDispatch]
[-CTMDispatchParallelCount count] [-CTMMaxRequestCount count]
[-CTMQueueDeleteWait time] [-CTMWatchQueue percent,percent,interval,mode]
[-CTMCreatePolicy normalDispatch | priorDispatch]
[-CTMWatchRequest count,interval] [-CTMLoadCheckInterval interval]
[-CTMStatsUse Y|N] [-CTMStatsFileCount file_count] [-CTMStatsFileSize file_size]
- Description
-
This message describes the usage method of the ctmstart command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70515-I
usage:ctmstop [-h] [-CTMDomain domain_name] [-CTMID ctmid][-CTMMyHost host_name] [-CTMForce [-CTMDebugInfo]]
- Description
-
This message describes the usage method of the ctmstop command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70516-I
usage:ctmdmstart [-h] [-CTMDomain domain_name] [-CTMMaxCTM ctmd_cnt] [-CTMPort port_no] [-CTMMyHost host_name] [-CTMForceStart | -CTMAutoForce] [-CTMSendInterval value] [-CTMSubnetMask value] [-CTMSendHost host_name] [-CTMSendHostInterval value][-CTMAliveCheckCount value]
- Description
-
This message describes the usage method of the ctmdmstart command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70517-I
usage:ctmdmstop [-h] [-CTMDomain domain_name] [-CTMMyHost host_name] [-CTMForce [-CTMDebugInfo]]
- Description
-
This message describes the usage method of the ctmdmstop command.
This message is displayed when the command format is invalid, or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70518-E
the number of processes (EJBRegulator and J2EE server) is over connection count
- Description
-
The number of connection processes exceeds the number of connections.
The registration process will be interrupted and the processing of the CTM daemon continues.
- Action
-
Check whether the number of connection processes exceeds the value specified in the -CTMEntryCount option.
-
KFCT70520-E
internal error occurred. err_code=aa....aa-bb....bb exception=cc....cc
aa....aa: Reason code 1
bb....bb: Reason code 2
cc....cc: Exception information
- Description
-
An exception occurred in the internal processing.
The daemon processing will be interrupted.
- Action
-
Acquire the reason code (aa....aa and bb....bb) and exception information (cc....cc), and then contact System Administrator.
-
KFCT70522-E
the number of ctmd processes is over connection count.
- Description
-
The number of registered CTM daemons exceeds the number of connections.
The registration process will be interrupted and the processing of the CTM daemon continues.
- Action
-
Check whether the number of connection processes exceeds the number of connections.
-
KFCT70523-E
cannot access shared memory.
- Description
-
An error occurred while accessing the shared memory.
The daemon processing will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the shared memory created?
Confirm that the daemon is running, and then re-execute the command.
-
Does the shared memory size exceed the maximum size that can be acquired?
Increase the memory or change the size to be acquired.
-
Is the relationship between the CTM domain name and CTMSPOOL specified in the -CTMDomain option invalid?
Specify an appropriate value in the -CTMDomain option.
-
-
KFCT70524-E
CTMDIR directory is not specified.
- Description
-
The environment variable CTMDIR is not specified.
The daemon processing will be interrupted.
- Action
-
Check the environment variable.
-
KFCT70525-E
too many files are open in this process.
- Description
-
The number of files that can be opened in the process exceeds the maximum value.
In the case of the daemon, an error message will be displayed and the processing continues. In the case of the command, the processing will be interrupted.
- Action
-
Check the maximum number of files that can be opened in the process.
-
KFCT70526-E
internal error occurred. err_code=aa....aa-bb....bb
aa....aa: Reason code 1
bb....bb: Reason code 2
- Description
-
An error occurred in the internal processing.
The daemon processing will be interrupted.
- Action
-
Acquire the reason code (aa....aa and bb....bb), and then contact System Administrator.
-
KFCT70527-E
cannot find ctmd with specified CTMID in this domain. CTMID=aa....aa.
aa....aa: CTM identifier
- Description
-
A CTM daemon with the specified CTM identifier cannot be found.
The daemon processing will be interrupted.
- Action
-
Check whether the CTM daemon with the specified CTM identifier is running.
This message may also be displayed when the CTM daemon is present. In such cases, you check whether the specified option is invalid or whether the option does not enable communication with the CTM daemon. Confirm that the -CTMDomain option and the -CTMID option is valid.
In cases other than above, execute ctmstop -TMForce -CTMDebugInfo and then forcibly terminate the CTM daemon.
-
KFCT70528-E
cannot find ctmdmd with specified domain name. domain name = aa....aa.
aa....aa: CTM domain name
- Description
-
A CTM domain manager with the specified CTM domain name cannot be found.
When this message is displayed in the CTM domain manager, the processing of the daemon continues. In other cases, the processing of the command or the daemon will be interrupted.
This message is also displayed when the CTM domain manager is present. In such cases, you check whether the specified option is invalid or whether the option does not enable communication with the CTM domain manager.
- Action
-
Confirm that the CTM domain manager with the specified CTM domain name is running.
Take the following actions based on the process output by this message:
- In the case of the ctmdmstop command
-
Check whether the -CTMDomain option is valid. In other cases, execute "ctmdmstop -CTMForce -CTMDebugInfo", and then forcibly terminate the CTM domain manager.
- In the case of ctmstart command
-
Check whether the -CTMDomain option is valid. In other cases, execute ctmdmstop -CTMForce -CTMDebugInfo, forcibly terminate the CTM domain manager, collect the data, and then restart the CTM domain manager. Restart the CTM daemon after this.
-
KFCT70529-E
the specified CTMPort number may be repeated.
- Description
-
The daemon processing will be interrupted.
The port number specified in the -CTMPort option may already be in use.
- Action
-
Change the port number, and then restart the daemon.
-
KFCT70530-E
the initialization of domain manager is failed. error_code1=aa....aa error_code2=bb....bb.
aa....aa: Maintenance information 1
bb....bb: Maintenance information 2
- Description
-
An attempt to initialize the CTM domain manager has failed.
The daemon processing will be interrupted.
The port number specified in the -CTMPort option may have already been used in the other processes.
- Action
-
See the error message displayed before this message, and then take action. If you do not understand the troubleshooting method from the error message, acquire the value of error_code1 (aa....aa) and error_code2 (bb....bb), and then contact System Administrator.
-
KFCT70531-E
cannot start sending UDP.
- Description
-
The CTM domain manager has failed to start sending the UDP.
The daemon processing will be interrupted.
- Action
-
See the error message displayed before this message, and then take action.
-
KFCT70532-E
the initialization of ctmd is failed. error_code1=aa....aa error_code2=bb....bb.
- Description
-
An attempt to initialize the CTM daemon has failed.
The daemon processing will be interrupted.
- Action
-
See the error message displayed before this message, and then take action. If you do not understand the troubleshooting method from the error message, acquire the value of error_code1 (aa....aa) and error_code2 (bb....bb), and then contact System Administrator.
-
KFCT70533-I
CTMDIR directory=aa....aa
CTM version=bb....bb
CTMSPOOL directory=cc....cc
CTMDomain=dd....dd
CTMPort=ee....ee
aa....aa: CTMDIR directory
bb....bb: Version
cc....cc: CTMSPOOL directory
dd....dd: CTM domain name
ee....ee: CTMPort value
- Description
-
The information related to the running CTM domain manager is output.
The startup process of the CTM domain manager continues.
-
KFCT70534-I
CTMDIR directory=aa....aa
CTM version=bb....bb
CTMSPOOL directory=cc....cc
CTMDomain=dd....dd
CTMID=ee....ee
CTMPort=ff....ff
aa....aa: CTMDIR directory
bb....bb: Version
cc....cc: CTMSPOOL directory
dd....dd: CTM domain name
ee....ee: CTM identifier
ff....ff: CTMPort value
- Description
-
The information related to the running CTM daemon is displayed.
The startup process of the CTM daemon continues.
-
KFCT70535-I
ctmdmd determined start type. start type=aa....aa.
aa....aa: Starting type (NORMAL START: Normal start, FORCE START: Forced normal start, or AUTO FORCE START: Automatic forced start)
- Description
-
The starting type of the CTM domain manager is determined.
The processing of the CTM domain manager continues.
-
KFCT70536-E
too many files are open in this system.
- Description
-
The number of files that can be opened in the system exceeds the maximum value.
In the case of the daemon, an error message will be displayed and the processing continues.
In the case of the command, the processing will be interrupted.
- Action
-
Check the maximum number of files that can be opened in the system.
-
KFCT70537-E
cannot get system resources. resource_code = aa....aa resource_value = bb....bb.
aa....aa: Resource name (RLIMIT_NOFILE: file descriptor)
bb....bb: Value that the user is trying to secure
- Description
-
The process of acquiring the system resources has failed.
The daemon processing will be interrupted.
- Action
-
Check the maximum number of system resources and the number of resources that you are trying to secure.
-
KFCT70538-E
ctmd with specified CTMID is on the other host.
- Description
-
The CTM daemon with the specified CTM identifier is running on a different host.
The daemon processing will be interrupted.
- Action
-
Confirm that the CTM daemon with the specified CTM identifier is running on the same host.
-
KFCT70539-I
now starting ctmregltd.
- Description
-
The CTM regulator is being started.
The startup process of the CTM regulator continues.
-
KFCT70540-I
usage:ctmregltd [-h] [-CTMDomain domain_name] [-CTMID ctmid]
[-CTMEjbPort port_no] [-CTMMyHost host_name] [-CTMTimeOut time]
[-CTMAgent 0|1] [-CTMIDLConnect [0|1]] [-PRFID cprfid] [-CTMClientConnectCount count]
- Description
-
This message describes the usage method of the CTM regulator.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70542-I
ctmregltd is now online.
- Description
-
The startup process of the CTM regulator is complete and online business can be started.
The processing of the CTM regulator continues.
-
KFCT70543-E
the error occurred while accessing domain manager information file.
- Description
-
An error occurred while accessing the CTMSPOOL information file.
The processing of the command and the daemon will be interrupted.
- Action
-
Confirm the following details:
-
An attempt to acquire the lock for the CTMSPOOL information file may have failed. Check whether a command is running for 10 or more seconds and whether a daemon is being started up for 10 or more seconds at the same time as the command or daemon that outputs this message.
-
The CTMSPOOL information file may not exist. Check whether the CTM domain manager is not started even once after installation.
-
Check whether a message was output before this message.
Check the above details, and then take actions as follows:
-
When a running command and a starting up daemon do not exist, restart the command or the daemon.
-
Start the CTM domain manager. See the message that was output before this message, and then remove the cause of the error.
-
-
KFCT70544-E
input number is invalid.
- Description
-
The input number of the ctmdminfo command is invalid.
The processing of the command will be interrupted.
- Action
-
Enter the valid number.
-
KFCT70545-I
now terminating ctmregltd
- Description
-
The CTM regulator is being terminated.
The processing of the CTM regulator continues.
-
KFCT70546-I
ctmregltd stop
- Description
-
The CTM regulator was stopped.
-
KFCT70547-W
ctmdmd is restarted, so -CTMMaxCTM value is ignored. now -CTMMaxCTM value is aa....aa
aa....aa: Value of the -CTMMaxCTM option used for startup now
- Description
-
The CTM domain manager will be restarted.
In this case, the value specified in the -CTMMaxCTM option is disregarded and the value of the -CTMMaxCTM option used for the previous startup is used.
The processing of the CTM domain manager continues.
- Action
-
To apply the value specified in the -CTMMaxCTM option, specify the -CTMForceStart option, and then re-execute the ctmdmstart command.
-
KFCT70548-E
cannot stop aa....aa. reason code=bb....bb.
aa....aa: Daemon
bb....bb: Reason for not being able to terminate the daemon
- Description
-
The daemon cannot be stopped.
The daemon termination process will be interrupted.
- Action
-
Check the operating state of the daemon. If the daemon is not stopped, stop the daemon again.
When checking the operating state of the daemon, check the cause described in bb....bb, and then take action. The following table lists the causes of the error described in bb....bb and the corresponding actions.
Table 19‒6: List of causes described in KFCT70548-E Cause of error
Cause
Action
SHARED_MEMORY
The shared memory cannot be referenced.
Check whether the daemon is running or whether the file under the environment variable CTMSPOOL is deleted.
STATUS
The daemon is starting or terminating.
Check whether the daemon is starting or terminating.
DAEMON_STARTING
The daemon is starting.
Check whether the daemon is starting. After the daemon startup process finishes, re-execute the termination process.
DAEMON_TERMINATING
The daemon is terminating.
Check whether the daemon is terminating.
PRC_STARTING
The registration process is starting. This message is displayed only during the termination of the CTM daemon.
Check whether the registration process is starting. After the startup process of the registration process finishes, re-execute the termination process.
PRC_TERMINATING
The registration process is terminating. This message is displayed only during the termination of the CTM daemon.
Check whether the registration process is terminating. After the termination process of the registration process finishes, re-execute the termination process.
MAYBE_DOWN
The daemon that is being terminated may have been terminated forcibly or abnormally.
If aa....aa is ctmdmd, forcibly start the daemon when the CTM domain manager is started up next time.
SYSTEM_CALL
The command detected a system call error during daemon termination. The daemon may have terminated normally.
Check whether the daemon is terminated normally. If the daemon has abended, see the message, and then remove the cause of the error.
-
KFCT70549-I
there is no domain information.
- Description
-
The CTM domain and the $CTMSPOOL information (in UNIX) or %CTMSPOOL% information (in Windows) are not registered in the local host.
The processing of the ctmdminfo command terminates.
-
KFCT70550-E
cannot delete domain information, because now ctmdmd is running.
- Description
-
The CTM domain manager with the specified CTM domain name is running, therefore, the CTM domain and CTMSPOOL information cannot be deleted.
The processing of the ctmdminfo command terminates.
- Action
-
Check the operating status of the CTM domain manager, and then re-execute the command.
-
KFCT70551-E
the error occurred while terminating process. name=aa....aa reason=bb....bb.
aa....aa: Executable format file name
When the corresponding process is in a Java application, "-" is output.
bb....bb: Reason for occurrence of error
- Description
-
An error occurred while terminating the CTM daemon registration process.
The process of terminating the corresponding CTM daemon registration process will be interrupted.
- Action
-
Check the executable format file name of the process in which the error occurred and the cause of the error. The reason for the error occurrence described in bb....bb and the corresponding actions are as follows:
- TIMEOUT
-
The termination of the CTM daemon registration process has not finished within the allocated time.
The termination of the registration process is taking some time. If required, use the ctmstopprc command to terminate the registration process forcibly.
- MAYBE_DOWN
-
The termination request cannot be executed for the CTM daemon registration process.
The registration process may have abended. Check whether the registration process has abended. If the registration process has abended, see the details such as the exception, and then remove the cause of the error.
-
KFCT70552-I
usage:ctmdminfo [-h] [-d]
- Description
-
This message describes the usage method of the ctmdminfo command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70553-E
the initialization of ctmregltd is failed. error_code1=aa....aa error_code2=bb....bb.
aa....aa: Maintenance information 1
bb....bb: Maintenance information 2
- Description
-
An attempt to initialize the CTM regulator has failed.
The daemon processing will be interrupted.
- Action
-
See the error message displayed before this message, and then take action. If you do not understand the troubleshooting method from the error message, acquire the value of error_code1 and error_code2, and then contact System Administrator.
-
KFCT70554-E
cannot stop ctmdmd, because ctmd is now running.
- Description
-
The registered CTM daemon is running; therefore, the CTM domain manager cannot be terminated.
The processing of the command will be interrupted.
- Action
-
Check the operating state of the registered CTM daemon, terminate the CTM daemon, and then re-execute the command.
-
KFCT70556-E
cannot entry this process, because of status.
- Description
-
The CTM daemon where the process is to be registered is either running or being terminated; therefore, the process cannot be registered.
The daemon processing will be interrupted.
- Action
-
If the CTM daemon where the process is to be registered is running, execute the command after the process becomes online. If the CTM daemon is terminated, restart the CTM daemon, and then execute the command.
-
KFCT70558-E
cannot get shared memory, because its size is too large. size = aa....aa.
aa....aa: Shared memory size that the user tried to acquire
- Description
-
An attempt was made to acquire shared memory (aa....aa) exceeding the maximum value determined by the system.
The daemon processing will be interrupted.
- Action
-
Use the formula for computing the shared memory size and adjust the shared memory size to be acquired or change the maximum value of the system.
-
KFCT70559-E
the error occurred while starting ctmd. process terminated.
- Description
-
An error occurred while starting the CTM daemon.
The processing of the command will be interrupted.
- Action
-
If another message is displayed before this message, see the displayed message, and then take action. If no other message is displayed, the CTM daemon may have abended. Acquire the file that exists under the environment variable CTMSPOOL, and then contact System Administrator.
-
KFCT70560-E
the error occurred while starting ctmdmd. process terminated.
- Description
-
An error occurred while starting the CTM domain manager.
The processing of the command will be interrupted.
- Action
-
If another message is displayed before this message, see the displayed message, and then take action. If no other message is displayed, the CTM domain manager may have abended. Acquire the file that exists under the environment variable CTMSPOOL, and then contact System Administrator.
-
KFCT70561-E
memory allocation failed.
- Description
-
An attempt to acquire memory has failed.
The processing of the daemon and the command will be interrupted.
- Action
-
Contact system administrator.
Terminate the unnecessary processes or increase the memory.
-
KFCT70566-W
an error occurred during the starting of aa....aa. pid=bb....bb
aa....aa: Process name
bb....bb: Process ID of the process that failed to start
- Description
-
An attempt to auto-start or restart the system process (bb....bb) has failed.
When starting the CTM daemon, the processing of the CTM daemon terminates. When restarting the system process, the processing of the CTM daemon continues.
- Action
-
Confirm that the command option file of the specified CTM regulator is valid, specify the correct file, and then restart the CTM daemon.
-
KFCT70567-W
an error occurred during the accessing of the option file for aa....aa.pid=bb....bb
aa....aa: Process name
bb....bb: Process ID of the process that failed to start
- Description
-
An error occurred while accessing the command option file of the system process (bb....bb).
When starting the CTM daemon, the processing of the CTM daemon terminates. When restarting the system process, the processing of the CTM daemon continues.
- Action
-
When starting the CTM daemon, confirm that the command option file of the specified CTM regulator is valid, and then restart the CTM daemon. If the CTM daemon is already running, check whether the file that exists under the environment variable CTMSPOOL is deleted.
-
KFCT70568-W
the specified option for aa....aa is invalid. pid=bb....bb
aa....aa: Process name
bb....bb: Process ID of the process that failed to start
- Description
-
The contents of the command option file of the system process (bb....bb) are invalid.
When starting the CTM daemon, the processing of the CTM daemon terminates. When restarting the system process, the processing of the CTM daemon continues.
- Action
-
When starting the CTM daemon, check the following details, and then restart the CTM daemon:
-
Are the contents of the command option file of the CTM regulator invalid?
You can use alphanumeric characters, spaces, hyphens (-), periods (.), and slants (/) in the command option file.
-
Is the specified command option file name invalid?
When restarting the system process, contact System Administrator.
-
-
KFCT70569-I
restart the system process. name=aa....aa.
aa....aa: Executable format file name of the process
- Description
-
The abended system process will be restarted.
-
KFCT70570-E
cannot restart system process. name=aa....aa.
aa....aa: Executable format file name of the process
- Description
-
An attempt to restart the system process has failed.
The processing of the CTM daemon continues.
- Action
-
See details such as an error message displayed before this message, remove the cause of the error, and then restart the system process, if required. If no error message is output, contact System Administrator.
Furthermore, if the system process is restarted using direct startup, the system process is not restarted even if it has abended. If you want to restart the system process when it has abended, terminate the CTM daemon, and then restart the process.
-
KFCT70571-I
usage:ctmrasget { [-h] | [-p] [-s] [-CTMSpool spool_directory | -CTMDomain domain_name] [-PRFSpool spool_directory] dest_directory }
- Description
-
This message describes the usage method of the ctmrasget command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70572-I
Cosminexus Component Transaction Monitor: RAS completed collection of aa....aa
aa....aa: Information and message to be collected
- Description
-
The information and messages of the ctmrasget command will be displayed.
-
KFCT70573-E
cannot create the process. process_name=aa....aa.
aa....aa: Process name (ctmd: CTM daemon, ctmdmd: CTM domain manager, or ctmregltd: CTM regulator)
- Description
-
An attempt to generate the process has failed.
The startup process of each daemon terminates.
- Action
-
Check the following details or restart after some time:
-
Are the system file resources insufficient?
-
Has the generation of child processes failed?
-
Is the memory insufficient?
-
-
KFCT70574-I
usage:ctmgetpid [-h] | -CTMDomain domain_name [-CTMID ctmid] [-CTMMyHost host_name] [-CTMGWID prc_id]
- Description
-
This message describes the usage method of the ctmgetpid command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70575-E
the error occurred while getting process ID.
- Description
-
An error occurred while acquiring the process ID.
The processing of the command terminates.
- Action
-
Confirm that the CTM daemon and CTM domain manager that are to be acquired are running or check whether the file that exists under the environment variable CTMSPOOL is deleted.
-
KFCT70576-I
now starting the application. prc_id=aa....aa name=bb....bb.
aa....aa: Process identifier
bb....bb: Executable format file name
If the program to be started is the ORB gateway, ctmregltd is output.
- Description
-
The startup process of the ORB gateway will start.
The startup processing of the program continues.
-
KFCT70577-E
the error occurred while starting the application. prc_id=aa....aa name=bb....bb pid=cc....cc reason=dd....dd.
aa....aa: Process identifier
bb....bb: Executable format file name
If the program to be started is the ORB gateway, ctmregltd is output.
cc....cc: Process ID of the program
dd....dd: Reason for occurrence of error
- Description
-
The processing of the command will be interrupted. However, even if this message is output, the startup processing of the program might continue.
To confirm that the program has started, see the message log and confirm that the KFCT70594-I message is output.
The following information is displayed in dd....dd.
- SHM_LOCK_ERROR
-
An attempt to lock the access to the shared memory failed.
- PRC_MAYBE_DOWN
-
An attempt to generate a process failed. Alternatively, termination of the process was detected.
- NOT_ENOUGH_MEMORY
-
The memory is insufficient.
- ENV_ERROR
-
The operation environment is not set up.
- PRC_NUM_OVER
-
The number of registered processes exceeded the upper limit.
- SAME_PRCID
-
A program having the same identifier has already been registered.
- TIMEOUT
-
The program has not started within the allocated time.
- CTMD_STARTING
-
The CTM daemon is being started.
- CTMD_TERMINATING
-
The CTM daemon is being terminated.
- CTMD_NOT_FOUND
-
The CTM daemon is not running.
- INAVALID_SHM
-
The shared memory is invalid.
- INTERNAL_ERROR
-
An error occurred in the internal processing.
- ENV_ANALYZE
-
An error occurred during analysis of the user environment variable definition.
- PRE_PROC
-
The processing prior to generating a process failed.
- Action
-
Revise the command argument.
-
KFCT70578-I
the application is now online. prc_id= aa....aa name=bb....bb pid=cc....cc.
aa....aa: Process identifier
bb....bb: Executable format file name
If the program to be started is the ORB gateway, ctmregltd is output.
cc....cc: Process ID of the startup process
- Description
-
The startup processing of the ORB gateway finished.
The processing of the program continues.
-
KFCT70580-I
now terminating the application. prc_id=aa....aa terminate type=bb....bb.
aa....aa: Process identifier
bb....bb: Termination type
- Description
-
The termination processing of the ORB gateway has started.
The termination processing of the program continues.
The following contents are displayed in bb....bb.
- NORMAL STOP
-
Normal termination
- FORCE STOP
-
Forced termination
-
KFCT70581-E
the error occurred while terminating the application. prc_id=aa....aa pid=bb....bb reason=cc....cc.
aa....aa: Process identifier
bb....bb: Process ID of the program
If the process ID of the program cannot be determined, -1 is output.
cc....cc: Reason for occurrence of error
- Description
-
An error occurred during termination processing of the ORB gateway.
The processing of the command will be interrupted. However, even if this message is output, the termination processing of the program might continue.
The following contents are displayed in cc....cc.
- SHM_LOCK_ERROR
-
An attempt to lock the access to the shared memory failed.
- PRC_MAYBE_DOWN
-
Abnormal termination of the program is detected.
- NOT_ENOUGH_MEMORY
-
The memory is insufficient.
- ENV_ERROR
-
The operation environment is not set up.
- PRCID_NOT_FOUND
-
A program having the specified process identifier is not registered.
- TIMEOUT
-
The program did not terminate within the allocated time.
- CTMD_STARTING
-
The CTM daemon is performing the startup processing.
- CTMD_TERMINATING
-
The CTM daemon is performing the termination processing.
- CTMD_NOT_FOUND
-
The CTM daemon is not running.
- INAVALID_SHM
-
The shared memory is invalid.
- PRC_STARTING
-
The program having the specified process identifier is performing the startup processing.
- PRC_TERMINATING
-
The program having the specified process identifier is performing the termination processing.
- INTERNAL_ERROR
-
An error occurred in the internal processing.
- Action
-
To confirm that the program has terminated, see the message log and confirm that the KFCT70596-I message is output.
-
KFCT70582-I
the application stop. prc_id=aa....aa pid=bb....bb.
aa....aa: Process type
bb....bb: Process ID of the program
- Description
-
The termination processing of the ORB gateway finished.
The termination processing of the program will finish.
-
KFCT70589-E
the error occurred in lock control for shared memory access.
- Description
-
An error occurred in the acquisition or release of lock when accessing the shared memory.
The processing will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the file under the CTMSPOOL directory deleted and are the access permissions changed?
Terminate the CTM daemon and CTM domain manager forcibly, and then restart the process.
-
-
KFCT70593-I
the entry of process is completed. process_kind=aa....aa prc_id=bb....bb pid=cc....cc.
aa....aa: Process type (Reg: CTM regulator, or J2ee: J2EE server)
bb....bb: Application identifier
In the case of a J2EE server and CTM regulator, "-" is output.
cc....cc: Process ID of the startup process
- Description
-
The process of registering the startup process (aa....aa) in the CTM daemon has finished.
The startup processing of the process continues.
-
KFCT70594-I
the process is ready for request. process_kind=aa....aa prc_id=bb....bb pid=cc....cc.
aa....aa: Process type (Reg: CTM regulator)
bb....bb: Process identifier
In the case of the CTM regulator, "-" is output.
In the case of the ORB gateway, the gateway identifier is output.
cc....cc: Process ID of the startup process
- Description
-
The CTM daemon registration process waits for a request.
The startup processing of the process continues.
-
KFCT70596-I
the release of process is completed. process_kind=aa....aa prc_id=bb....bb pid=cc....cc.
aa....aa: Process type (Reg: CTM regulator, ORB gateway, or J2ee: J2EE server)
bb....bb: Process identifier
In the case of a J2EE server and CTM regulator, "-" is output.
In the case of the ORB gateway, the gateway identifier is output.
cc....cc: Process ID of the process for which the termination process has finished
- Description
-
The termination process of the CTM daemon registration process has finished.
The processing of the registration process continues.
-
KFCT70601-E
execution of process is failed. name=aa....aa reason=bb....bb.
aa....aa: Executable format file name
bb....bb: Reason for occurrence of error
- Description
-
An attempt to execute the startup process has failed.
The startup processing of the process will be interrupted.
The reason for the error occurrence describes the errno value of the system call execvp(2) provided in the operating environment.
- Action
-
See the message KFCT75500-E displayed before this message or the operating environment-specific reasons for the occurrence of error, and then take action. Note that this message is not displayed if Windows is used.
-
KFCT70603-W
shared memory is invalid. initialize shared memory. reason=aa....aa. kind=bb....bb.
aa....aa: Reason for occurrence of error
bb....bb: Shared memory type (ctmd: shared memory for CTM daemon, or ctmdmd: shared memory for CTM domain manager)
- Description
-
The shared memory is invalid. New shared memory will be created. The daemon startup process continues.
The following contents are described in aa....aa.
- INVALID_VERSION
-
The version of shared memory is invalid.
- CRITICAL_NG
-
The management information in the shared memory is destroyed.
-
KFCT70604-E
shared memory is invalid. process terminated. reason=aa....aa. kind=bb....bb.
aa....aa: Reason for occurrence of error
bb....bb: Shared memory type (ctmd: shared memory for CTM daemon, or ctmdmd: shared memory for CTM domain manager)
- Description
-
The shared memory that you tried to reference is invalid.
The processing of the command or the daemon terminates.
- Action
-
Check the following details for each reason for error occurrence described in aa....aa, and then take action:
- In the case of INVALID_VERSION
-
-
Is the version of the CTM domain manager and the CTM daemon running currently, different from the version of the process that outputs this message?
-
The CTM domain manager and the CTM daemon are not running, but is the previously shared memory remaining during the abnormal or forced termination of a daemon in the previous process?
-
Is a version conflict detected when the previously shared memory is referenced while restarting the CTM domain manager?
In the case of 1. and 2., the version of the process that outputs this message and the version of the created shared memory are different, so the shared memory cannot be used. When using the shared memory, restart the CTM domain manager and the CTM daemon of the same version as that of the process that outputs this message.
In the case of 3., you cannot reuse the shared memory that you are trying to use. Specify the -CTMForceStart option or -CTMAutoForce option in the ctmdmstart command, and then start the CTM domain manager.
-
- In the case of CRITICAL_NG
-
When the CTM daemon or the CTM domain manager is terminated abnormally or forcibly, you cannot reuse the shared memory that you are trying to use. Specify the -CTMForceStart option or -CTMAutoForce option in the ctmdmstart command, and then start the CTM domain manager.
-
KFCT70606-I
the creation of process is succeeded. prc_id=aa....aa program_name=bb....bb pid=cc....cc dir_id=dd....dd.
aa....aa: Process identifier
If the process does not have a process identifier, "-" is output.
bb....bb: Executable format file name
cc....cc: Process ID of the generated process
dd....dd: Current directory ID
If the process does not have a directory ID, "-" is output.
- Description
-
An attempt to generate the process was successful.
The startup processing of the CTM daemon registration process continues.
-
KFCT70607-E
the error occurred while accessing environment definition file. CTMEnviron=aa....aa
aa....aa: User environment variable definition file name
- Description
-
An error occurred while accessing the user environment variable definition file.
The processing of the command terminates.
- Action
-
See the message KFCT75500-E displayed before this message, and then remove the cause of the error.
-
KFCT70608-E
the definition of environment is invalid. CTMEnviron=aa....aa line=bb....bb.
aa....aa: User environment variable definition file name
bb....bb: Line number with the analysis error
- Description
-
The contents of the user environment variable definition file are invalid.
If a single definition is coded across multiple lines using the continuation symbol (\), the line number describing the first line of the definition with an error will be displayed.
The processing of the command terminates.
- Action
-
Check the following details in the description of the user environment variable definition file:
-
Is there a line in which equal sign (=) is missing?
-
Is there a line with the equal sign (=) at the beginning or the end of the line?
-
Is there an environment variable name beginning with "CTM" or "ctm"?
-
Is there a line with only spaces and tabs?
If invalid, modify the contents of the user environment variable definition file.
-
-
KFCT70611-W
load library failed. library=aa....aa reason=bb....bb.
aa....aa: Library name that failed to load
bb....bb: Reason for the load failure
- Description
-
An attempt to load the library (aa....aa) has failed.
The processing continues.
- Action
-
Contact system administrator.
The System Administrator will reference the reason for the load failure described in bb....bb, and then take action. The reasons for the load failure described in bb....bb and the corresponding actions are as follows:
- unsatisfied
-
The library symbol cannot be resolved.
The environment variable that specifies the library storage directory may be invalid or an invalid version of Cosminexus TPBroker may have been used. Modify the environment variable that specifies the library storage directory or install the correct version of Cosminexus TPBroker, and then re-execute the command. Revise the specified value of cpp.library.version.
- security
-
The loading of the library is not permitted.
Contact maintenance personnel.
- init
-
An attempt to initialize the library has failed.
Contact maintenance personnel.
-
KFCT70612-E
the fatal error occurred. so process is aborted. reason=aa....aa.
aa....aa: Reason for occurrence of error
- Description
-
A fatal error occurred.
The process being executed will be interrupted.
The following contents are described in aa....aa.
- SHM_LOCK_ERROR
-
An attempt to control the locking of the shared memory has failed.
- Action
-
Confirm the following details, and then take action:
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the file under the CTMSPOOL directory deleted and are the access permissions changed?
Terminate the CTM domain manager and the CTM daemon forcibly, and then restart the process.
-
-
KFCT70613-E
system process may be down. name=aa....aa pid=bb....bb end_status=cc....cc.
aa....aa: Executable format file name of the process
bb....bb: Process ID of the process for which abnormal termination is detected
cc....cc: End status
- Description
-
An abended system process was detected.
The following contents are displayed in the termination state of cc....cc:
- The displayed termination state
-
-
In the case of a system process that is started automatically when starting the CTM daemon
When the CTM daemon is online, the termination state of the process will be displayed. When the CTM daemon is running or being terminated (including forced termination), "*" will be displayed.
-
In the case of other system processes
"-" will be displayed.
-
If an automatically terminated process is a system process that is automatically started during the startup of the CTM daemon, re-execute the startup process. In other cases, the processing of the CTM daemon continues.
- Action
-
Check whether the message KFCT70569-I is output after this message.
If the message KFCT70569-I is output, the applicable system process is restarted. If the message is not output, see details such as the error message displayed before this message, remove the cause of the error, and then restart, if required.
When the applicable system process is not restarted and if no error message is displayed, contact System Administrator.
-
KFCT70617-E
cannot get the connecting information from specified domain. domain_name=aa....aa ip_address=bb....bb reason=cc....cc.
aa....aa: Name of the CTM domain for which information acquisition failed
bb....bb: IP address of the CTM domain manager for which information acquisition failed. If this message is output for the ctmgetior command, * is output.
cc....cc: Reason for occurrence of error
- Description
-
IOR information cannot be acquired from the CTM domain. If other CTM domains are specified, the system will continue to acquire IOR information for the next CTM domain.
- Action
-
Check the causes for the error occurrence described in cc....cc, and then take action. The following table lists the reasons for the error occurrence described in cc....cc and the corresponding actions.
Table 19‒7: List of causes described in KFCT70617-E Cause of error
Cause
Action
COMM_FAILURE
A failure occurred during connection to the relevant CTM domain manager.
See the CTM domain log of each CTM domain manager to investigate the failure in IOR information acquisition, and then remove the failure.
If the failure information is not output to the CTM domain log, a failure might have occurred during connection to the CTM domain manager. If necessary, forcibly terminate the relevant CTM domain manager, collect the data, and then restart the CTM domain manager.
GET_INFO_ERROR
An attempt to acquire IOR information from the relevant CTM domain failed.
See the CTM domain log of each CTM domain manager to investigate the failure in IOR information acquisition, and then remove the failure.
INVALID_VERSION
The relevant CTM domain manager does not have a function for acquiring IOR information.
Check the version of the relevant CTM domain manager.
Specify the CTM domain name of a CTM domain manager of CTM 01-02 or later.
TIMEOUT
IOR information acquisition processing has not finished within the allocated time.
See the CTM domain log of each CTM domain manager to investigate the failure in IOR information acquisition, and then remove the failure.
If the failure information is not output to the CTM domain log, a failure might have occurred during connection to the CTM domain manager. If necessary, forcibly terminate the relevant CTM domain manager, collect the data, and then restart the CTM domain manager.
STATUS
The CTM domain manager is being started or terminated.
If the CTM domain manager is being started, wait until it is online. If the CTM domain manger is being terminated, restart it as required.
INTERNAL_ERROR
An error occurred in the internal processing.
-
KFCT70618-W
there is no connecting information in specified domain. domain_name= aa....aa ip_address=bb....bb.
aa....aa: CTM domain name
bb....bb: IP address of the CTM domain manager
- Description
-
The relevant CTM domain does not contain the IOR information that meets the specified conditions.
If other CTM domains are specified, the system will continue to acquire IOR information for the next CTM domain.
- Action
-
Check whether the conditions specified with the ctmgetior command are satisfied. For example, check the following:
-
Check whether the CTM daemon, ORB gateway, and J2EE application are running in the relevant CTM domain.
-
Check whether -CTMIDLConnect 1 is specified for the ORB gateway.
-
If the -CTMInterfaceName option or -CTMLookupName is specified, check whether the corresponding EJB exists in the CTM node in which the ORB gateway (with -CTMIDLConnect 1 specified) is running. Note that the EJB must have the remote interface or INS registration name that matches the specified value (-CTMInterfaceName option or -CTMLookupName).
-
-
KFCT70619-E
there is no connecting information in the specified domains.
- Description
-
IOR information that satisfies the specified conditions was not acquired.
The command will terminate without outputting an IOR file.
- Action
-
For the CTM domains specified with the ctmgetior command, check the same items as for the KFCT70618-W message. If the check result indicates that the specified conditions have no problems in the operation environment, check for a failure in the CTM domain manager from which the IOR information is acquired. For details about failures that occurred in the CTM domain managers, see the standard error output or CTM domain log of the CTM domain manager.
-
KFCT70621-E
an error occurred during the acquiring of connecting information. reason=aa....aa
aa....aa: Reason for occurrence of error
- Description
-
The IOR information acquisition processing in the CTM domain manager failed.
The IOR information acquisition processing will be interrupted.
- Action
-
Check the causes for the error occurrence described in aa....aa, and then take action. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒8: List of causes described in KFCT70621-E Cause of error
Cause
Action
INVALID_DATA
The contents of the IOR information are invalid.
Terminate the CTM domain manager, CTM daemon, ORB gateway, and J2EE in the relevant CTM domain, and then restart them.
ACCESS_ERROR
A failure occurred during access to IOR information.
Make sure that no file was deleted from under the CTMSPOOL directory used by the relevant CTM domain manager. Also make sure that the access permissions were not changed.
NOT_ENOUGH_MEMORY
The memory is insufficient.
Terminate the unnecessary processes or increase the memory.
-
KFCT70622-W
an error occurred during the initialization of connecting information. reason=aa....aa
aa....aa: Reason for occurrence of error
- Description
-
An attempt to initialize IOR information failed.
The processing of the CTM domain manager will be interrupted.
- Action
-
Check the causes for the error occurrence described in aa....aa, and then take action. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒9: List of causes described in KFCT70622-W Cause of error
Cause
Action
ACCESS_ERROR
A failure occurred during access to IOR information.
Make sure that no file was deleted from under the CTMSPOOL directory used by the relevant CTM domain manager. Also make sure that the access permissions were not changed.
NOT_ENOUGH_MEMORY
The memory is insufficient.
Terminate the unnecessary processes or increase the memory.
-
KFCT70624-W
the error occurred while updating the connecting information. type=aa....aa reason=bb....bb.
aa....aa: Update type
bb....bb: Reason for occurrence of error
- Description
-
An attempt to update the IOR information failed.
The processing of the daemon continues.
The following contents are displayed in aa....aa.
- ADD_INFORMATION
-
Addition of IOR information
- DELETE_INFORMATION
-
Deletion of IOR information
- Action
-
Check the causes for the error occurrence described in bb....bb, and then take action. The following table lists the reasons for the error occurrence described in bb....bb and the corresponding actions.
Table 19‒10: List of causes described in KFCT70624-W Cause of error
Cause
Action
INVALID_DATA
The contents of the IOR information are invalid.
Make sure that no file was deleted from under the CTMSPOOL directory used by the relevant CTM domain manager. Also make sure that the access permissions were not changed.
ACCESS_ERROR
A failure occurred during access to IOR information.
Make sure that no file was deleted from under the CTMSPOOL directory used by the relevant CTM domain manager. Also make sure that the access permissions were not changed.
NOT_ENOUGH_MEMORY
The memory is insufficient.
Terminate the unnecessary processes or increase the memory.
-
KFCT70634-E
timeout occurred.
- Description
-
When executing the ctmstart command, the CTM daemon startup process was not terminated even after the lapse of the timeout period specified in the -CTMStartTimeOut option.
The processing of the command will be interrupted.
- Action
-
Revise the value specified in the -CTMStartTimeOut option used when executing the command.
Modify the specified timeout value, and then re-execute the command.
-
KFCT70638-I
ctmgetior [-h] | [ { -CTMDomain domain_name[,domain_name...] | -CTMDomainAll } ] [ { -CTMID ctmid[,ctmid...] | -CTMIDAll } ] [-CTMHost host_name[,host_name...] ] [-CTMMyHost host_name] [-CTMInterfaceName interface_name[,interface_name...] ] [-CTMLookupName lookup_name[,lookup_name...] ] [-CTMOutPath directory]
- Description
-
This message describes the usage method of the ctmgetior command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. If the specified option is invalid, modify the specified option, and then re-execute the command.
-
KFCT70639-E
the error occurred while accessing file. name=aa....aa reason=bb....bb.
aa....aa: File name
bb....bb: Reason for occurrence of error
- Description
-
The error occurred while accessing file.
- Action
-
Check the causes for the error occurrence described in bb....bb, and then take action. The following table lists the reasons for the error occurrence described in bb....bb and the corresponding actions.
Table 19‒11: List of causes described in KFCT70639-E Cause of error
Cause
Action
SYSTEM_CALL
A system call error occurred.
See the KFCT75500-E message displayed before this message, and then remove the cause of the failure.
PATH_LENGTH
The file name is too long.
Revise the value specified for the -CTMOutPath option.
-
KFCT70641-W
cannot terminate ctmd, because shared memory has been broken. error_code=aa....aa.
aa....aa: Maintenance information
- Description
-
Some of the management information in the shared memory is destroyed because the CTM domain manager was terminated forcibly or abnormally.
The previously managed CTM daemon cannot be terminated forcibly. The startup process of the CTM domain manager continues.
- Action
-
Check whether a previously started CTM daemon exists in the CTM domain specified in the CTM domain manager startup command.
If a previously started CTM daemon is found in the CTM domain specified with the ctmdmstart command, directly terminate that CTM daemon.
-
KFCT70643-I
ctmdmd determined restart mode. mode= aa....aa.
aa....aa: Inheritance status of the previous system state
- Description
-
This message describes whether the CTM domain manager was started with the previous system state inherited or the CTM domain manager was started in the initial state since the system state cannot be inherited during automatic forced startup of the CTM domain manager. The startup process of the CTM domain manager continues.
The following contents are displayed in aa....aa:
- REUSE
-
The management information is inherited, so the CTM domain manager will start with the system state prior to the previous termination recovered.
- INITIALIZE
-
The management information is not inherited, so the CTM domain manager will start in the initial state.
-
KFCT70648-I
now starting ctmtscgwd.
- Description
-
The OTM gateway is being started.
The startup process of the OTM gateway continues.
-
KFCT70649-I
usage:ctmtscgwd [-h] [-CTMDomain domain_name] [-CTMID ctmid] [-CTMMyHost host_name] [-CTMPort port_no] [-CTMTPool] [-CTMClientConnectCount count]
- Description
-
This message describes the usage method of the OTM gateway.
This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT70650-I
ctmtscgwd is now online.
- Description
-
The startup process of the OTM gateway has finished and online business can be started.
The processing of the OTM gateway continues.
-
KFCT70651-I
now terminating ctmtscgwd.
- Description
-
The OTM gateway is being terminated.
The processing of the OTM gateway continues.
-
KFCT70652-I
ctmtscgwd stop.
- Description
-
The OTM gateway was stopped.
-
KFCT70653-E
the initialization of ctmtscgwd is failed. error_code1=aa....aa error_code2=bb....bb.
aa....aa: Maintenance information 1
bb....bb: Maintenance information 2
- Description
-
An attempt to initialize the OTM gateway has failed.
The processing of the OTM gateway will be interrupted.
- Action
-
See the message displayed before this message, and then take action. If you do not understand the troubleshooting method from the error message, acquire the value of error_code1 (aa....aa) and error_code2 (bb....bb), and then contact System Administrator.
-
KFCT70654-I
usage:ctmstartgw [-h] -CTMGWID prc_id [-CTMDomain domain_name] [-CTMID ctmid] [-CTMMyHost host_name] [-CTMEjbPort port_no] [-CTMEnviron file] [-CTMTimeOut time] [-CTMAgent 0|1] [-CTMIDLConnect [0|1]] [-CTMClientConnectCount count]
- Description
-
This message describes the usage method of the ctmstartgw command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
-
KFCT70655-I
usage:ctmstopgw [-h] -CTMGWID prc_id [-CTMDomain domain_name] [-CTMID ctmid] [-CTMMyHost host_name] [-CTMForce [-CTMDebugInfo] ]
- Description
-
This message describes the usage method of the ctmstopgw command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
-
KFCT70700-I
now initializing CTM for J2EE server.
- Description
-
The CTM functionality in the J2EE server is being initialized.
The initialization process of the CTM functionality continues.
-
KFCT70701-I
the initialization of CTM is completed.
- Description
-
The initialization of the CTM functionality for the J2EE server has finished.
The processing continues.
-
KFCT70702-E
the initialization of CTM is failed.
- Description
-
An attempt to initialize the CTM functionality for the J2EE server has failed.
The startup process of the J2EE server continues, but the CTM functionality cannot be used.
- Action
-
Take action based on the previous message, and then restart the J2EE server.
-
KFCT70703-I
now finalizing CTM for J2EE server.
- Description
-
The CTM functionality for the J2EE server is being terminated.
The termination process of the CTM functionality continues.
-
KFCT70704-I
the finalization of CTM is completed.
- Description
-
The termination process of the CTM functionality for the J2EE server has finished.
The processing continues.
-
KFCT70705-E
the finalization of CTM is failed.
- Description
-
An attempt to terminate the CTM functionality for the J2EE server has failed.
The termination process of the J2EE server continues.
- Action
-
Take action based on the previous message before you next start the J2EE server.
-
KFCT70706-E
the property is invalid. property. name=aa....aa inter=bb....bb.
aa....aa: Invalid property name
bb....bb: Maintenance information
- Description
-
The property (aa....aa) is invalid.
- Action
-
Revise the property definition, and then restart the J2EE server.
-
KFCT70710-E
the error occurred while initializing CTM for J2EE server. kind=aa....aa detail=bb....bb inter=cc....cc.
aa....aa: Error type
bb....bb: Maintenance information 1
cc....cc: Maintenance information 2
- Description
-
An error occurred while initializing the CTM functionality for the J2EE server
The CTM functionality cannot be used.
- Action
-
Take action based on the error type described in aa....aa, and then restart the J2EE server. The following table lists the types of errors described in aa....aa and the corresponding actions.
Table 19‒12: List of error types described in KFCT70710-E Cause of error
Cause
Action
LOAD_LIBRARY
An attempt to read the library has failed.
Check whether the library path environment variables are set correctly and, if necessary, revise them.
ENVIRON
An attempt to acquire the environment variables has failed.
Check whether the environment variables CTMDIR and CTMSPOOL are set correctly and, if necessary, revise them.
COMMUNICATION
An error occurred in the communication process.
Check whether the Cosminexus TPBroker environment and properties are set correctly and, if necessary, revise them.
SH_MEM
An attempt to access shared memory has failed.
Check whether the environment variables CTMDIR and CTMSPOOL are set correctly and, if necessary, revise them.
In addition, check whether the CTMSPOOL directory exists, whether the library or directory under CTMSPOOL is deleted or changed, and whether the permissions have been changed and, if necessary, revise them.
MEMORY
The memory is insufficient.
Terminate the unnecessary processes.
Others
An error occurred in the internal processing.
Acquire kind (aa....aa), detail (bb....bb), and inter (cc....cc), and then contact maintenance personnel.
-
KFCT70711-E
the error occurred while finalizing CTM for J2EE server. kind=aa....aa detail=bb....bb inter=cc....cc.
aa....aa: Error type
bb....bb: Maintenance information 1
cc....cc: Maintenance information 2
- Description
-
An error occurred in the termination process of the CTM functionality for the J2EE server.
The termination process of CTM will be interrupted, but the process of stopping the J2EE server continues.
- Action
-
Take action based on the error type described in aa....aa, and then restart the J2EE server. The error type described in aa....aa and the corresponding actions are as follows:
- NOT_INITIALIZED
-
The initialization of CTM is not complete. Check whether an error occurred during the CTM initialization process.
If an error occurred during the initialization process, remove the error.
- In cases other than above
-
An error occurred in the internal processing.
Acquire kind (aa....aa), detail (bb....bb), and inter (cc....cc), and then contact maintenance personnel.
-
KFCT70712-E
Performance trace is unavailable due to failure of initialization. (reason=aa....aa)
aa....aa: Reason code
- Description
-
An attempt to initialize the PRF trace has failed; therefore, the PRF trace cannot be used.
The CTM functionality cannot be used.
- Action
-
Take action as per the reason code described in aa....aa, and then restart the J2EE server. The following table lists the reason codes described in aa....aa and the corresponding actions.
Table 19‒13: List of reason codes displayed in KFCT70712-E Reason code
Cause
Action
-1
The environment variable PRFSPOOL is not set.
Confirm that the environment variable PRFSPOOL is set.
-2
An error occurred during startup processing of the PRF trace service of the process.
The PRF demon may not have been invoked.
Confirm that the PRF demon is invoked.
-3
An error such as a system call error occurred during startup processing of the PRF trace service of the process.
See the log file present below setup-directory-of-environment-variable-PRFSPOOL\log\PRF-identifier (in Windows) or $PRFSPOOL/log/PRF-identifier (in UNIX).
Check the Cosminexus Performance Tracer messages, confirm the cause of the error, and then take action.
-
KFCT70713-E
cannot entry J2EE server. reason=aa....aa detail=bb....bb.
aa....aa: Reason
bb....bb: Maintenance information
- Description
-
The J2EE process cannot be registered.
The registration process of the J2EE server will be interrupted.
- Action
-
Take action based on the reason described in aa....aa, and then restart the J2EE server. The following table lists the reasons described in aa....aa and the corresponding actions.
Table 19‒14: List of reasons described in KFCT70713-E Cause of error
Cause
Action
STARTING
The CTM daemon is starting.
Start the J2EE server when the CTM daemon is online.
STOPPING
The CTM daemon is being stopping.
Start the J2EE server when the CTM daemon is online.
OVER
The number of processes that can be registered in the CTM daemon is exceeded.
Specify an appropriate value in -CTMEntryCount of the ctmstart command, restart the CTM daemon, and then restart the J2EE server.
HOST
The host is different from the CTM daemon.
Check whether the CTM daemon is running on the same machine, whether the -CTMMyHost option of the ctmstart command and the ejbserver.ctm.CTMMyHost property of the J2EE server are invalid and if necessary, revise them.
SYSTEM
A shared memory operation or an exclusive control has failed.
Check whether a file or directory under CTMSPOOL is deleted or changed or whether the permissions are changed and, if necessary, revise them.
MEMORY
The memory is insufficient.
Terminate the unnecessary processes.
Others
An error occurred in the internal processing.
Acquire reason (aa....aa) and detail (bb....bb), and then contact maintenance personnel.
-
KFCT70714-E
cannot clear J2EE server. reason=aa....aa detail=bb....bb.
aa....aa: Reason
bb....bb: Maintenance information
- Description
-
An attempt to un-register a J2EE server has failed.
The process of un-registering the J2EE server will be interrupted. Also, when this message is displayed, the CTM daemon may not be stopped normally.
- Action
-
Take action based on the reason described in aa....aa, and then restart the J2EE server. The following table lists the reasons described in aa....aa and the corresponding actions.
Table 19‒15: List of reasons described in KFCT70714-E Cause of error
Cause
Action
STARTING
The CTM daemon is starting.
Stop the J2EE server when the CTM daemon is online.
STOPPING
The CTM daemon is being stopping.
Stop the J2EE server when the CTM daemon is online.
MEMORY
The memory is insufficient.
Terminate the unnecessary processes.
Others
An error occurred in the internal processing.
Acquire reason (aa....aa) and detail (bb....bb), and then contact maintenance personnel.
-
KFCT70715-E
cannot find ctmd. domain=aa....aa ctmid=bb....bb.
aa....aa: CTM domain name of the target CTM daemon
bb....bb: CTMID of the target CTM daemon
- Description
-
The CTM daemon cannot be found.
The initialization or termination process of the CTM functionality for the J2EE server will be interrupted.
- Action
-
Take action depending on the state in which the error occurred.
- When starting the J2EE server
-
Confirm the following details, and then take action:
-
Is the CTM daemon running?
-
Is osagent running?
-
Is the environment variable OSAGENT_PORT invalid?
-
Is the property (ejbserver.ctm.CTMDomain, ejbserver.ctm.CTMID, ejbserver.ctm.CTMMyHost) corresponding to the CTM for the J2EE server invalid?
-
- When stopping the J2EE server
-
Confirm the following details, and then take action:
-
Is the CTM daemon stopped forcibly?
-
Is the CTM daemon abended?
-
-
KFCT70716-E
J2EE server may be down. name=aa....aa pid=bb....bb.
aa....aa: Server name of the J2EE server with termination detected
bb....bb: Process ID of the J2EE server with termination detected
- Description
-
The stopping of a J2EE sever was detected.
This message is displayed if a registered J2EE server is not stopped normally. If the CTM daemon is online, the processing of the CTM daemon continues.
- Action
-
Check whether a J2EE server with the output server name and process ID is abended.
If the J2EE server is abended, check the reason, remove the cause of the error, and then restart the server.
-
KFCT71000-E
memory allocation error. size : aa....aa
aa....aa: Secured memory size
- Description
-
An attempt to acquire memory has failed.
The processing continues.
- Action
-
Contact system administrator.
Terminate the unnecessary processes or increase the memory.
-
KFCT71001-E
can't start thread. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
The thread cannot be started.
The processing continues.
- Action
-
Confirm the following details, and then take action:
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71003-W
option error:aa....aa
aa....aa: Option name
- Description
-
An attempt to acquire the option has failed.
The default value will be set and the processing continues.
-
KFCT71004-E
invalid option value:aa....aa
aa....aa: Option name
- Description
-
The specified value of the option is invalid.
- Action
-
Check the specified value of the option
-
KFCT71005-W
failed in initializing communication module. reason code : aa....aa
aa....aa: Reason code for the initialization failure
- Description
-
An attempt to initialize the communication module has failed.
The processing continues.
The following reason codes are displayed in aa....aa.
Table 19‒16: List of reason codes described in KFCT71005-W Reason code
Cause of error
1
Memory is insufficient.
2
An exception of CORBA was caught.
3
An unexpected exception was caught.
4
An attempt to initialize the lock area has failed.
5
An attempt to secure the lock has failed.
6
An attempt to release the lock has failed.
7
The communication data is invalid.
8
The communication data that cannot be processed was received.
9
An unexpected error occurred.
-
KFCT71051-W
communication manager not found. communication manager name : aa....aa host name :bb....bb maintenance code1 : cc....cc code2 : dd....dd
aa....aa: Communication management object name
bb....bb: Host name
If the search for the communication management object is not executed on a specific host, "********" is displayed.
cc....cc: Maintenance code
dd....dd: Maintenance code
- Description
-
The communication management object was not found.
The processing continues, but the connection cannot be established.
- Action
-
Confirm the following details, and then take action:
-
Is osagent abended?
Restart osagent.
-
Is osagent overloaded?
Terminate the unnecessary processes.
-
Are the environment variables 'OSAGENT_PORT', 'OSAGENT_ADDR', and 'OSAGENT_ADDR_FILE' and the ORB option invalid?
Specify valid environment variables OSAGENT_PORT, OSAGENT_ADDR, and OSAGENT_ADDR_FILE and a valid ORB option.
-
Have the CTM daemon or CTM domain manager abended?
Restart the CTM daemon or CTM domain manager.
-
Is the specified CTMID and CTM domain name invalid?
Specify a valid CTMID and CTM domain name.
If this message is displayed continuously even after taking action, execute the osfind command and communicate the result to maintenance personnel.
-
-
KFCT71052-W
convert an object reference to string/convert string to an object reference error for CORBA object. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to convert a CORBA object to a string or to restore the object has failed.
The processing continues, but communication is not possible.
- Action
-
Confirm the following details, and then take action:
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the network interface abended?
Change the network interface settings so that communication is possible.
-
Is a process with an object (CTM daemon or CTM domain manager) abended?
Restart the process as defined in CTM.
-
Is a process with an object been restarted on a different port?
Specify the -CTMPort option for the process.
-
-
KFCT71053-E
failed in initializing communication module. maintenance code1 : aa....aa code2 : bb....bb
aa....aa: Maintenance code1
bb....bb: Maintenance code2
- Description
-
An attempt to initialize the communication module has failed.
The processing continues.
- Action
-
Confirm the following details, and then take action:
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the specified value of the -CTMPort option being used in other processes?
Change the specified value of the -CTMPort option to a value that is not used in other processes.
-
-
KFCT71100-W
request of communication manager timeout. communication manager name : aa....aa timeout : bb....bb
aa....aa: Communication management object name
bb....bb: Timeout value
- Description
-
The invocation of the communication management object has timed out.
The processing continues.
- Action
-
Confirm the following details:
-
Is the process with the communication management object over loaded?
-
Is the connection physically disconnected?
-
-
KFCT71101-W
can't register communication object : aa....aa,bb....bb
aa....aa: Communication management object name
bb....bb: Communication object name
- Description
-
The communication object cannot be registered.
The processing continues, but a message cannot be sent to that communication object.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, terminate the unnecessary processes or increase the memory.
-
KFCT71102-W
can't register communication object : aa....aa
aa....aa: Communication management object name
- Description
-
The communication object cannot be registered.
The processing continues, but a message cannot be sent to that communication object.
- Action
-
Confirm the following details, and then take action:
-
Are there too many communication objects to be registered?
Reduce the number of J2EE servers connected to one CTM daemon.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71103-W
communication object not registered : aa....aa,bb....bb
aa....aa: Communication management object name
bb....bb: Communication object name
- Description
-
The communication object cannot be registered.
The processing continues, but a message cannot be sent to that communication object.
- Action
-
Check the message KFCT71101-W or KFCT71102-W to confirm whether an attempt to register the communication object has failed, and then take action.
-
KFCT71150-W
cannot open a new connection for a thread. maintenance code1 : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to establish connection has failed.
The processing continues, but the request cannot be sent.
- Action
-
Confirm the following details, and then take action:
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the network interface abended?
Change the network interface settings so that communication is possible.
-
-
KFCT71151-W
static connection request timeout. timeout : aa....aa
aa....aa: Timeout value
- Description
-
The request timed out.
The processing continues.
- Action
-
Confirm the following details:
-
Is the send destination process overloaded?
-
Is the processing of the request time-consuming?
-
-
KFCT71152-W
static connection request failure. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to process the request has failed.
The processing continues, but the request processing result cannot be acquired.
- Action
-
Confirm the following details, and then take action:
-
Is the process abended?
Restart the process as defined in CTM.
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
-
KFCT71153-W
cannot narrow an object reference to a sub-type. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to convert the object has failed.
The processing continues, but the request cannot be sent.
- Action
-
Check whether the process has not aborted. After checked, restart the process as defined in CTM.
-
KFCT71200-W
dynamic connection request failure. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to process the request has failed.
The processing continues, but the request processing result cannot be acquired.
- Action
-
Confirm the following details, and then take action:
-
Is the process abended?
Restart the process as defined in CTM.
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
-
KFCT71201-W
cannot open a new connection for inter-ctmd. maintenance code1 : aa....aa code2 : bb....bb
aa....aa: Maintenance code1
bb....bb: Maintenance code2
- Description
-
An attempt to establish a connection between the CTM daemons has failed.
The processing continues, but a message cannot be sent.
- Action
-
Confirm the following details, and then take action:
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the network interface abended?
Change the network interface settings so that communication is possible.
-
Are the settings for the interlinking of multiple osagent (including between networks) invalid?
Specify valid settings for the interlinking of multiple osagent (including between networks). For details, see the Borland(R) Enterprise Server VisiBroker(R) Developers Guide.
-
-
KFCT71202-W
inter-ctmd receiver not found : aa....aa
aa....aa: Message receiving object name
- Description
-
The message receiving objects between the CTM daemons cannot be found.
The processing continues.
-
KFCT71203-W
can't register inter-ctmd receiver : aa....aa
aa....aa: Message receiving object name
- Description
-
The message receiving objects between the CTM daemons cannot be registered.
The processing continues.
- Action
-
Confirm the following details, and then take action:
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the shared memory insufficient?
Increase the specified value of the -CTMMaxCTM option.
-
-
KFCT71204-W
can't remove inter-ctmd receiver : aa....aa
aa....aa: Message receiving object name
- Description
-
The message receiving objects between the CTM daemons cannot be removed.
The processing continues.
-
KFCT71250-W
shared memory allocation error. maintenance code1: aa....aa code2: bb....bb
aa....aa: Maintenance code1
bb....bb: Maintenance code2
- Description
-
The shared memory is insufficient.
The processing continues, but the information related to communication between the CTM daemons is insufficient.
- Action
-
Check the value specified in the -CTMMaxCTM option. After checked, increase the specified value of the -CTMMaxCTM option.
-
KFCT71251-E
UDP initialization error. port : aa....aa
aa....aa: Port number
- Description
-
An attempt to initialize the UDP has failed.
The processing continues, but the information related to communication between the CTM daemons cannot be sent.
- Action
-
Confirm the following details, and then take action:
-
Is the specified port number already being used?
Change the specified value of the CTMPort option.
-
Are the specified values of the -CTMMaxCTM option, the CTMClientConnectCount option, and the -CTMServerConnectCount option invalid?
Specify an appropriate value in the -CTMMaxCTM option, the -CTMClientConnectCount option, and the -CTMServerConnectCount option
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71252-W
UDP receive error. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to receive UDP has failed.
The processing continues, but the information related to communication between the CTM daemons cannot be received.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, terminate the unnecessary processes or increase the memory.
-
KFCT71253-W
UDP send Error. maintenance code : aa....aa address : bb....bb port : cc....cc
aa....aa: Maintenance code
bb....bb: Send destination IP address (broadcast address)
cc....cc: Send destination port number
- Description
-
An attempt to send UDP has failed.
The processing continues, but the information related to communication between the CTM daemons cannot be sent.
- Action
-
Confirm the following details, and then take action:
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the network interface abended?
Change the network interface settings so that communication is possible.
-
-
KFCT71255-W
UDP data processing error : method aa....aa
aa....aa: Method name
- Description
-
An attempt to process the UDP communication data has failed.
The processing continues.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, terminate the unnecessary processes or increase the memory.
-
KFCT71256-W
UDP from other domain : aa....aa
aa....aa: CTM domain name
- Description
-
The UDP data of another CTM domain was received.
The data will be destroyed and the processing continues.
- Action
-
Check whether a CTM domain manager of another CTM domain is running with the same port number. If the CTM domain manager is running with the same port number, start the CTM domain manager with a different port number for each CTM domain.
-
KFCT71257-E
the same CTMID was detected. CTMID: aa....aa ipaddr:bb....bb
aa....aa: CTM identifier
bb....bb: IP address of the node started by the CTM identifier
- Description
-
The same CTM identifier is detected.
- Action
-
The CTM identifier must be unique to the CTM domain.
-
KFCT71300-W
read/write lock error
- Description
-
An attempted Read lock or Write lock has failed.
The processing continues.
-
KFCT71352-I
usage:ctmridinfo [-h] | [-CTMDomain domain_name] [-CTMHost host_name] [-CTMMyHost host_name]
- Description
-
This message describes the usage method of the ctmridinfo command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. If the specified option is invalid, modify the specified option, and then re-execute the command.
-
KFCT71353-E
domain information not found. maintenance code1 : aa....aa code2 : bb....bb code3 : cc....cc
aa....aa: Maintenance information 1
bb....bb: Maintenance information 2
cc....cc: Maintenance information 3
- Description
-
This message is displayed when the CTM domain information is not found in the specified CTM domain manager.
The process to acquire the CTM domain information will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the specified value of the option invalid?
Specify a valid value for the option.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is there a CTM daemon connected to the specified CTM domain manager?
Start a CTM daemon, connected to the specified CTM domain manager.
-
-
KFCT71357-E
communication manager request failure. maintenance code1 : aa....aa code2 : bb....bb
aa....aa: Maintenance information 1
bb....bb: Maintenance information 2
- Description
-
An attempt to process the requests for the communication management object has failed.
The process to acquire the CTM domain information will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the CTM domain manager abended?
Start the CTM domain manager.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
Is the network interface abended?
Change the network interface settings so that communication is possible.
-
-
KFCT71361-E
convert string to an object reference error for Naming Context. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to restore the CORBA Naming Context string has failed.
The CORBA Naming Context cannot be used, so the processing will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the specified value of the -CTMINSRef option invalid?
Specify an appropriate value in the -CTMINSRef option.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71362-E
Naming Service not found. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
The CORBA Naming Service cannot be found.
The CORBA Naming Context cannot be used, so the processing will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the specified value of the -CTMINSRef option invalid?
Specify an appropriate value in the -CTMINSRef option.
-
Is the CORBA Naming Service abended?
Restart the CORBA Naming Service, and then restart the CTM daemon.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71363-E
failed in initializing communication with Naming Service. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to initialize the communication with the CORBA Naming Service has failed.
The CORBA Naming Context cannot be used, so the processing will be interrupted.
- Action
-
Confirm the following details, and then take action:
-
Is the specified value of the -CTMINSRef option invalid?
Specify an appropriate value in the -CTMINSRef option.
-
Is the naming context or object of the CORBA Naming Service changed?
Restart the CORBA Naming Service, and then restart the CTM daemon.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71364-W
timeout occurred in communication with Naming Service. timeout : aa....aa
aa....aa: Timeout value
- Description
-
A timeout occurred in the communication with the CORBA Naming Service.
The processing continues.
- Action
-
Check whether the CORBA Naming Service is overloaded.
-
KFCT71365-E
timeout occurred in communication with Naming Service. timeout : aa....aa
aa....aa: Timeout value
- Description
-
A timeout occurred in the communication with the CORBA Naming Service.
The processing continues, but the CORBA Naming Service cannot be used.
- Action
-
Check whether the CORBA Naming Service is overloaded.
Restart the CORBA Naming Service, and then restart the CTM daemon.
-
KFCT71366-E
request to Naming Service failure. maintenance code : aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to process the CORBA Naming Service has failed.
The processing continues, but the CORBA Naming Service cannot be used.
- Action
-
Confirm the following details, and then take action:
-
Is the CORBA Naming Service abended?
Restart the CORBA Naming Service, and then restart the CTM daemon.
-
Is the naming context or object of the CORBA Naming Service changed?
Restart the CORBA Naming Service, and then restart the CTM daemon.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT71403-W
cannot get System Property. property name : ejbserver.client.ctm.RequestPriority maintenance code: aa....aa default value is used:bb....bb.
aa....aa: Exception occurred
bb....bb: Default value
- Description
-
An exception occurred while analyzing the ejbserver.client.ctm.RequestPriority property.
The default value will be used and the processing continues.
- Action
-
Take action based on the exception (aa....aa) that has occurred.
- SecurityException
-
Check the security manager policy.
- NullPointerException
-
Contact maintenance personnel.
- IllegalArgumentException
-
Contact maintenance personnel.
-
KFCT71404-W
invalid property value is specified. ejbserver.client.ctm.RequestPriority=aa....aa. default value is used:bb....bb.
aa....aa: Specified property value
bb....bb: Default value
- Description
-
An invalid value was specified in ejbserver.client.ctm.RequestPriority.
The default value will be used and the processing continues.
- Action
-
Specify a valid property value.
-
KFCT73002-E
prf tracing service cannot be started. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: PRF identifier
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
An error occurred when starting the PRF trace service.
The PRF daemon terminates.
- Action
-
Based on the list of reason codes described in the following table, investigate the causes, remove the cause of the error, and then restart the PRF daemon.
Table 19‒17: List of reason codes described in KFCT73002-E Reason code
Cause
101
Memory is insufficient.
102
Memory is insufficient.
103
An I/O error occurred when verifying the file or when creating a new file.
104
The new message queue ID in the msgget system call was not allocated. Check the usage status with the ipcs command. If an unnecessary message queue exists, the queue needs to be deleted with the ipcrm command.
106
The directory specified in the environment variable PRFSPOOL may not have been created correctly.
112
The specified PRF trace service is already running. Alternatively, the PRF trace service has stopped but a new PRF trace service cannot start because the running process is collecting the trace.
114
The shared memory used in the PRF trace service is corrupted.
115
The address of the shared memory used in the PRF trace service cannot be acquired.
401
An error occurred while opening an internal control file of the PRF trace service.
402
An internal control file of the PRF trace service is corrupted.
403
An error occurred in an internal control file of the PRF trace service. The directory specified in the environment variable PRFSPOOL may not have been created correctly.
404
The specified trace file creation directory is invalid.
502
An error occurred during creation of the necessary environment to control the PRF tracing service.
1601
An error occurred in the system call.
-
KFCT73003-E
prf tracing service cannot be continued. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: PRF identifier
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
A failure occurred while acquiring the PRF trace.
The PRF daemon terminates.
- Action
-
Based on the list of reason codes described in the following table, investigate the causes, remove the cause of the error, and then restart the PRF daemon.
Table 19‒18: List of reason codes described in KFCT73003-E Reason code
Cause
101
Memory is insufficient.
103
An I/O error occurred in the trace file.
104
The new message queue ID in the msgget system call was not allocated. Check the usage status with the ipcs command. If an unnecessary message queue exists, the queue needs to be deleted with the ipcrm command.
1601
An error occurred in the system call.
-
KFCT73004-W
failure to initialize for prf tracing service. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: PRF identifier
If the PRF identifier cannot be identified, **** is displayed.
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
An error occurred during initialization of the PRF trace service in the process.
The PRF trace acquisition of the process in which the error occurred will be suspended. This initialization is a preparatory process to acquire the PRF trace in the process.
Note that, this message may also be output during command execution.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒19: List of failure reason codes displayed in KFCT73004-W Reason code
Cause
101
Memory is insufficient.
106
The directory specified in the environment variable PRFSPOOL may not have been created correctly.
115
The shared memory controlled by the PRF daemon cannot be accessed. If output with a command, confirm that the specified PRF daemon is running.
1601
An error occurred in the system call.
-
KFCT73100-I
now starting statistical information service. ID:aa....aa
aa....aa: Service identifier(CTM identifier)
- Description
-
The statistical information service is running.
-
KFCT73101-I
statistical information service started. ID:aa....aa
aa....aa: Service identifier(CTM identifier)
- Description
-
The statistical information service was started.
-
KFCT73102-I
statistical information service stopped ID:aa....aa
aa....aa: Service identifier(CTM identifier)
- Description
-
The statistical information service was stopped.
-
KFCT73104-W
statistical information service cannot be started. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: Service identifier(CTM identifier)
bb....bb: Reason code
cc....cc: Internal code
- Description
-
A failure occurred in the initialization of the statistical information service.
The statistical information cannot be acquired in the relevant CTM node.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒20: List of reason codes for errors described in KFCT73104-W Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
2
The shared memory used for operation statistics is insufficient.
Revise the size of the shared memory.
3
The shared memory used for operation statistics cannot be accessed.
Contact maintenance personnel.
4
The new message queue ID in the msgget system call was not allocated.
Delete the unnecessary message queue ID.
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the environment variable CTMSPOOL.
6
An attempt to start the timer thread has failed.
Contact maintenance personnel.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
9
The specified statistical information service is already running.
--
10
An attempted exclusive control has failed.
Contact maintenance personnel.
11
An error occurred in the internal processing.
Contact maintenance personnel.
- Legend:
-
--: No action is performed.
-
KFCT73105-W
failure to create I/O thread for statistical information service. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: Service identifier(CTM identifier)
bb....bb: Reason code
cc....cc: Internal code
- Description
-
An attempt to create an exclusive I/O thread for the statistical information service has failed.
The statistical information cannot be acquired in the relevant CTM node.
The statistical information service will not be executed in the relevant CTM node.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒21: List of reason codes for errors described in KFCT73105-W Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
3
The shared memory used for operation statistics cannot be accessed.
Contact maintenance personnel.
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the CTMSPOOL environment variable.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
-
KFCT73106-W
I/O thread for statistical information service is stopped. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: Service identifier(CTM identifier)
bb....bb: Reason code
cc....cc: Internal code
- Description
-
The exclusive I/O thread of the statistical information service was stopped.
The acquisition of statistical information cannot continue in the relevant CTM node.
The statistical information service will be suspended in the relevant CTM node.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒22: List of failure reason codes displayed in KFCT73106-W Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
4
The new message queue ID in the msgget system call was not allocated.
Delete the unnecessary message queue ID.
11
An attempt to open the statistical information file has failed.
Contact maintenance personnel.
12
An I/O error occurred for the statistical information file.
Contact maintenance personnel.
-
KFCT73107-W
failure to initialize on process for statistical information service. ID:aa....aa reason code=bb....bb-cc....cc
aa....aa: Service identifier(CTM identifier)
bb....bb: Reason code
cc....cc: Internal code
- Description
-
An attempt to initialize the statistical information service in the process has failed.
The statistical information of the relevant process is not acquired.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒23: List of failure reason codes displayed in KFCT73107-W Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
3
The shared memory used for operation statistics cannot be accessed.
Contact maintenance personnel.
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the environment variable CTMSPOOL.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
-
KFCT73200-E
cannot delete module trace file. file name:aa....aa reason code=bb....bb-cc....cc
aa....aa: Path name of the file that cannot be deleted
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
The module trace file used in the CTM or performance tracer cannot be deleted.
The deletion of the module trace file will be skipped.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error, and then re-execute the command.
Table 19‒24: List of reason codes described in KFCT73200-E Reason code
Cause
101
Memory is insufficient.
204
An attempt to delete the module trace file has failed.
1601
A system call error occurred.
-
KFCT73201-E
module trace cannot be started. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal system code
- Description
-
An error occurred while starting the module trace acquisition used in the CTM or performance tracer.
The module trace will not be acquired.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error, and then re-execute the command.
Table 19‒25: List of reason codes described in KFCT73201-E Reason code
Cause
101
Memory is insufficient.
106
The directory specified in the environment variables CTMSPOOL and PRFSPOOL may not have been created correctly. Also, if the environment variable CTMSPOOL is omitted, you need to revise the directory specified in the environment variable CTMDIR.
201
The following directories cannot be created:
-
$CTMSPOOL/utt (in UNIX) or %CTMSPOOL%\utt (in Windows)
-
$PRFSPOOL/utt (in UNIX) or %PRFSPOOL%\utt (in Windows)
202
The following directories cannot be created:
-
$CTMSPOOL/utt/umt (in UNIX) or %CTMSPOOL%\utt\umt (in Windows)
-
$PRFSPOOL/utt/umt (in UNIX) or %PRFSPOOL%\utt\umt (in Windows)
502
An error occurred while creating the necessary environment to control the module trace.
504
An attempt to initialize the timer process has failed. The system continues and the module trace will be acquired. However, the unnecessary files in the following directories will not be deleted:
-
$CTMSPOOL/utt/umt (in UNIX) or %CTMSPOOL%\utt\umt (in Windows)
-
$PRFSPOOL/utt/um (in UNIX) or %PRFSPOOL%\utt\umt (in Windows)
Normally, the unnecessary files are deleted every 24 hours. Contact maintenance personnel.
1601
A system call error occurred.
-
-
KFCT73202-E
failure to initialize for module trace. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal system code
- Description
-
An error occurred while initializing the module trace acquisition used in the CTM or performance tracer.
The module trace of the process in which an error occurred is not acquired. This initialization is a preparatory process to acquire the module trace in the process.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error, and then re-execute the command.
Table 19‒26: List of reason codes described in KFCT73202-E Reason code
Cause
101
Memory is insufficient.
106
The directory specified in the environment variables CTMSPOOL and PRFSPOOL may not have been created correctly. Also, if the environment variable CTMSPOOL is omitted, you need to revise the directory specified in the environment variable CTMDIR.
109
An error occurred while creating the module trace file.
Remove the cause of the error from the errno value of KFCT73351-E or KFCT75500-E.
201
The following directories cannot be created:
-
$CTMSPOOL/utt (in UNIX) or %CTMSPOOL%\utt (in Windows)
-
$PRFSPOOL/utt (in UNIX) or %PRFSPOOL%\utt (in Windows)
Remove the cause of the error from the errno value of KFCT73351-E or KFCT75500-E.
202
The following directories cannot be created:
-
$CTMSPOOL/utt/umt (in UNIX) or %CTMSPOOL%\utt\umt (in Windows)
-
$PRFSPOOL/utt/umt (in UNIX) or %PRFSPOOL%\utt\umt (in Windows)
Remove the cause of the error from the errno value of KFCT73351-E or KFCT75500-E.
203
An error occurred in the umt internal exclusive control.
Communicate the errno value of the message KFCT75500-E to maintenance personnel.
503
An attempt to open the directory for creating the module trace file has failed. This directory will be created while starting CTM domain manager and the PRF daemon. Check whether the CTM domain manager and the PRF daemon are running normally in the execution environment in which this message is displayed.
505
The option argument of the command is invalid.
Revise the option argument of the message KFCT73350-E.
1601
A system call error occurred.
-
-
KFCT73203-W
error occurred while checking trace file number. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal system code
- Description
-
An error occurred while deleting the files under the following directories:
-
$CTMSPOOL/utt/umt (in UNIX) or %CTMSPOOL%\utt\umt (in Windows)
-
$PRFSPOOL/utt/umt (in UNIX) or %PRFSPOOL%\utt\umt (in Windows)
The files under these directories will not be deleted, but the processing of the system continues.
-
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒27: List of failure reason codes displayed in KFCT73203-W Reason code
Cause
101
Memory is insufficient.
203
An error occurred in the umt internal exclusive control.
Communicate the errno value of the message KFCT75500-E to maintenance personnel.
-
KFCT73300-E
cannot execute aa....aa command. reason code=bb....bb-cc....cc
aa....aa: Name of the command that cannot be executed
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
The command (aa....aa) cannot be executed.
The command terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error, and then re-execute the command.
Table 19‒28: List of reason codes described in KFCT73300-E Reason code
Cause
101
Memory is insufficient.
103
An I/O error occurred in the file.
106
The internal system file required for executing the aa....aa command does not exist. Confirm the following details:
-
The directory of the environment variable PRFSPOOL in the environment in which the command is executed
-
PRF identifier specified in the command
107
An error occurred while opening the trace file.
116
The number of specified trace files exceeds 256.
804
The file cannot be found.
1601
An error occurred in the system call.
-
-
KFCT73303-I
usage:ctmstsstart [-h] | [[-CTMDomain domain_name] [-CTMID ctmid] [-CTMInterval interval_time] [-CTMCheckInterval interval_time]]
- Description
-
This message describes the usage method of the ctmstsstart command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT73304-I
usage:ctmstsstop [-h] | [[-CTMDomain domain_name] [-CTMID ctmid]]
- Description
-
This message describes the usage method of the ctmstsstop command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT73307-I
usage:ctmstsed [-h] | [-CTMEdit edit-item[,edit-item]] [-CTMInterval interval] [-CTMTime [start][,end]] [-CTMQueueName queuename[,queuename]] [-CTMMethod methodname[,methodname]] [-CTMCsv] [-CTMStdout] [ststrace-file [ststrace-file]]
- Description
-
This message describes the usage method of the ctmstsed command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT73308-E
ctmstsstart command cannot be executed. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal code
- Description
-
The ctmstsstart command cannot be executed.
The command execution will be suspended.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒29: List of reason codes described in KFCT73308-E Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
3
The shared memory used for operation statistics cannot be accessed.
Contact maintenance personnel.
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the environment variable CTMSPOOL. If the environment CTMSPOOL is not specified, revise the value specified in the environment variable CTMDIR.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
15
An error occurred in the internal processing.
Contact maintenance personnel.
16
An attempt to acquire the IP address has failed.
Contact maintenance personnel.
17
The CTM daemon of the relevant CTM identifier is not online or the statistical information service is not running in the CTM node.
Confirm that the CTM daemon is running.
18
The exclusive control between processes has failed.
Contact maintenance personnel.
19
The ctmstsstart command is already executed.
If required, execute the ctmstsstop command, and then re-execute the ctmstsstart command.
26
The statistical information service is not running.
To acquire the statistical information, start the statistical information service.
-
KFCT73309-E
ctmstsstop command cannot be executed. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal code
- Description
-
The ctmstsstop command cannot be executed.
The command execution will be suspended.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒30: List of reason codes displayed in KFCT73309-E Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
3
The shared memory used for operation statistics cannot be accessed.
Contact maintenance personnel.
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the environment variable CTMSPOOL. If the environment CTMSPOOL is not specified, revise the value specified in the environment variable CTMDIR.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
10
An attempted exclusive control has failed.
Contact maintenance personnel.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
15
An error occurred in the internal processing.
Contact maintenance personnel.
16
An attempt to acquire the IP address has failed.
Contact maintenance personnel.
17
The CTM daemon of the relevant CTM identifier is not online or the statistical information service is not running in the CTM node.
Confirm that the CTM daemon is running.
18
The exclusive control between processes has failed.
Contact maintenance personnel.
22
The ctmstsstart command is not yet executed.
Execute the ctmstsstart command, and then execute the ctmstsstop command.
-
KFCT73310-E
ctmstsed command cannot be executed. reason code=aa....aa-bb....bb
aa....aa: Reason code
bb....bb: Internal code
- Description
-
An error occurred while executing the ctmstsed command.
The command execution will be suspended.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒31: List of reason codes described in KFCT73310-E Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
11
An attempt to create a file to output the edited output has failed or an attempt to open the statistical information file has failed.
Investigate the reason due to which the file cannot be created (access settings, OS settings), remove the cause of the error, and then re-execute the command. If an attempt to open the statistical information file has failed, revise the command specifications, and then re-execute the command.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
14
The number of statistical information files specified in the argument of the ctmstsed command has exceeded 256.
Specify a value of 256 or less for the number of statistical information files specified in the argument of the command, and then execute the command.
15
An error occurred in the internal processing.
Contact maintenance personnel.
23
An error occurred in the edited output of the statistical information.
Contact maintenance personnel.
24
An old output result file is remaining in the current directory.
The statistical information file is entered from a standard input, so whether to overwrite the file cannot be prompted. Therefore, the processing was interrupted. If the statistical information file is entered from a standard input, delete or save the operation statistics output file present in the directory to be executed, and then execute the command.
-
KFCT73311-W
no records found to meet the condition. aborts processing.
- Description
-
A record in which the statistical information is to be edited was not found. The processing will now stop.
The record for the specified time interval does not exist or the contents of the specified file do not exist.
The command process will be interrupted.
- Action
-
Revise the time specified in the -CTMTime option or revise the specified statistical information file.
In the Windows environment, confirm that the statistical information file is specified.
-
KFCT73314-I
usage: ctmstsflush [-h] | [-CTMDomain domain_name] [-CTMID ctmid]
- Description
-
This message describes the usage method of the ctmstsflush command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT73315-E
ctmstsflush command cannot be executed. reason code= aa....aa- bb....bb
aa....aa: Reason code
bb....bb: Internal code
- Description
-
An error occurred while executing the ctmstsflush command.
The command execution will be suspended.
- Action
-
Based on the list of reason codes described in the following table, remove the cause of the error.
Table 19‒32: List of reason codes described in KFCT73315-E Reason code
Cause
Action
1
Memory is insufficient.
Revise the memory size
5
The specified environment variable CTMSPOOL is invalid.
Revise the value specified in the environment variable CTMSPOOL. If the environment CTMSPOOL is not specified, revise the value specified in the environment variable CTMDIR.
8
The path specified in the environment variable CTMSPOOL is too long.
Check whether the length of the path exceeds 1,023 bytes and, if necessary, revise it.
13
An error occurred in the system call.
Check the message displayed before this message, and then contact maintenance personnel.
15
An error occurred in the internal processing.
Contact maintenance personnel.
17
The CTM daemon of the relevant CTM identifier is not online or the statistical information service is not running in the CTM node.
Confirm that the CTM daemon is running.
18
The exclusive control between processes has failed.
Contact maintenance personnel.
22
The ctmstsstart command is not yet executed.
Execute the ctmstsstart command, and then execute the ctmstsflush command.
26
The statistical information service is not running.
To acquire the statistical information, start the statistical information service.
27
A timeout occurred.
The writing to the trace information file in the buffer may have finished. Contact maintenance personnel.
-
KFCT73350-E
command option is invalid. aa....aa
aa....aa: Option name
- Description
-
The command option is invalid.
The processing will be interrupted.
- Action
-
Check whether the specified option is invalid or whether a problem exists in the combination of the specified options and, if necessary, revise them. Modify the specified option, and then re-execute the command.
-
KFCT73351-E
"aa....aa(bb....bb)" failed. errno=cc....cc
aa....aa: System call in which the error occurred
bb....bb: Internal information
cc....cc: errno value of the system call
- Description
-
An error occurred in the system call.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to investigate the cause of the error in the system call.
-
KFCT73352-R
aa....aa file exists. Is it overwritten ? [Y:Yes N:No]
aa....aa: File name
- Description
-
An operation statistics output file created during the previous execution of the ctmstsed command is present in the current directory. If you want to overwrite this output file, choose Y, and if you do not to overwrite it, choose N. You can also use lower case.
- Action
-
Specify Y or N as per the message.
-
KFCT73353-I
The execute of aa....aa command was suspended.
aa....aa: Command name
- Description
-
The processing of the command that is being executed will be interrupted.
- Action
-
If a message is displayed before this message, remove the cause of the error based on that message, and then re-execute the command. If a message is not displayed before this message, contact maintenance personnel.
-
KFCT73354-E
the combination of domain name and CTMSPOOL directory is invalid.
- Description
-
The combination of the CTM domain name and the environment variable CTMSPOOL is invalid.
The processing of the command will be interrupted.
- Action
-
Check whether the specified environment variable CTMSPOOL is already being used in another CTM domain manager with another CTM domain name, and then re-execute the command.
-
KFCT73355-I
buffering of statistical information is started. ID:aa....aa start time:bb....bb output interval:cc....cc connect check interval:dd....dd
aa....aa: CTM identifier
bb....bb: Buffering start time (yyyy/mm/dd hh: mm format)
cc....cc: Time interval output to the file (unit: minutes)
dd....dd: Time interval to perform connection count check (unit: seconds)
- Description
-
The process of acquiring the statistical information into the shared memory will start.
-
KFCT73356-I
buffering of statistical information is stopped. ID:aa....aa
aa....aa: CTM identifier
- Description
-
The buffering of the statistical information into the shared information was stopped.
-
KFCT73357-I
ctmstsstart command is accepted. option: aa....aa
aa....aa: The specified option name and option argument are displayed in the following format:
Option name[,option argument][;option name[,option argument]...]
- Description
-
The ctmstsstart command is accepted.
The processing of the command continues.
-
KFCT73364-W
cannot output trace information to a statistical file.
- Description
-
The statistical information cannot be output to a file.
The output of the statistical information will stop.
- Action
-
Execute the ctmstsstop command and the ctstsstart command and then resume the acquisition of the statistical information. After the statistical information is output to the previous file, the statistical information pooled in the buffer is not output to the file.
-
KFCT73401-I
usage:cprfstart [-h] | [-PRFID cprfid] [-PrfTraceLevel tracelevel[,[tracelevel]...]] [-PrfTraceCount count] [-PrfTraceFileSize file_size] [-PrfTraceBufferSize buffer_size] [-PrfRemakeBuffer] [-PrfNoBackUp [0|1]]
- Description
-
This message describes the usage method of the cprfstart command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73402-I
usage:cprfstop [-h] | [-PRFID cprfid] [-Force]
- Description
-
This message describes the usage method of the cprfstop command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73403-I
usage:cprfed [-h] | [[-Dump | -CSV] [-Time [start][,end]] [-ProcessID process-ID[,process-ID...]][-TraceFile prftrace-file[,prftrace-file...] | -AllTraceFile]]
- Description
-
This message describes the usage method of the cprfed command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73404-I
usage:cprflevel [-h] | [-PRFID cprfid] [-PrfChangeLevel tracelevel[,[tracelevel]...]] [-PrfLevelIndex index] [-PrfLevelAll]
- Description
-
This message describes the usage method of the cprflevel command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73405-I
usage:cprfflush [-h] | [-PRFID cprfid]
- Description
-
This message describes the usage method of the cprfflush command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73406-I
usage:cprfgetpid [-h] | [-PRFID cprfid]
- Description
-
This message describes the usage method of the cprfgetpid command.
This message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. Modify the specified option, and then re-execute the command.
-
KFCT73410-I
now starting cprfd.
- Description
-
The PRF daemon is being started.
The startup process of the PRF daemon continues.
-
KFCT73411-I
ProductName = aa....aa
PpNo = bb....bb
Version = cc....cc
PRFID = dd....dd
PRFSPOOL directory = ee....ee
aa....aa: Product name
bb....bb: Product ID
cc....cc: Version
dd....dd: PRF identifier
ee....ee: PRFSPOOL directory
- Description
-
The information related to PRF daemon that is being started is output.
The startup process of the PRF daemon continues.
-
KFCT73412-I
cprfd is now online.
- Description
-
The startup of the PRF daemon is finished.
The processing of the PRF daemon continues.
-
KFCT73413-I
now terminating cprfd. terminate type =aa....aa
aa....aa: Termination type (NORMAL STOP: Normal termination, FORCE STOP: Forced normal termination)
- Description
-
The PRF daemon is being terminated.
The processing of the PRF daemon continues according to the contents described in the termination type (aa....aa).
-
KFCT73414-I
CPRFD stop.
- Description
-
The PRF daemon was stopped normally.
The processing of the PRF daemon terminates.
-
KFCT73415-I
prf trace level is aa....aa.
aa....aa: PRF trace level
- Description
-
The current PRF trace level for index number 1 will be displayed and the command terminates.
-
KFCT73416-I
prf trace level was changed from aa....aa to bb....bb.
aa....aa: old PRF trace level
bb....bb: new PRF trace level
- Description
-
The old and new PRF trace levels at index number 1 will be displayed and the command terminates.
-
KFCT73417-I
option for aa....aa= bb....bb
aa....aa: Command name
bb....bb: The specified option name and option argument are displayed in the following format:
Option name[,option argument][;option name[,option argument]...]
- Description
-
The command is accepted. The option (bb....bb) specified in the command will be output.
The processing of the command continues.
-
KFCT73418-I
all prf trace levels are:
[aa....aa]=bb....bb [aa....aa]=bb....bb [aa....aa]=bb....bb [aa....aa]=bb....bb
aa....aa: Index number
bb....bb: PRF trace level of the relevant index number
- Description
-
All the current PRF trace levels will be displayed and the command terminates.
-
KFCT73419-I
prf trace level of [aa....aa] is bb....bb.
aa....aa: Index number
bb....bb: PRF trace level of the relevant index number
- Description
-
The PRF trace level of the specified index number will be displayed and the command terminates.
-
KFCT73420-I
prf trace level was changed:
[aa....aa]= bb....bb -> [aa....aa]= cc....cc
aa....aa: Index number
bb....bb: Old PRF trace level of the relevant index number
cc....cc: New PRF trace level of the relevant index number
- Description
-
The old and new PRF trace levels will be displayed and the command terminates.
-
KFCT73430-E
prf tracing service cannot be started. ID= aa....aa reason code = bb....bb - cc....cc.
aa....aa: PRF identifier
If the PRF identifier cannot be identified, **** is displayed.
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
An attempt to start the PRF trace service failed.
The PRF trace service will terminate.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. However, when exclusive control fails, an internal error occurs, and a message other than the listed reason codes appears, contact maintenance personnel.
Table 19‒33: List of reason codes displayed in KFCT73430-E Reason code
Cause
101
Memory is insufficient.
102
Memory is insufficient.
104
The new message queue ID in the msgget system call was not allocated. Check the usage status with the ipcs command. If an unnecessary message queue exists, the queue needs to be deleted with the ipcrm command.
106
The environment variable PRFSPOOL may not have been specified or the directory specified in the environment variable PRFSPOOL may not have been created correctly.
112
The specified PRF trace service is already running. Alternatively, the PRF trace service has terminated but a new PRF trace service cannot start because the running process is collecting the trace.
115
An attempt to access the shared memory used in the PRF trace service failed.
117
The specified option is invalid.
118
The shared memory used in the PRF trace service cannot be reused. Add the -PrfRemakeBuffer option to the cprfstart command, and then execute the command.
119
An attempt to re-create the shared memory used in the PRF trace service failed. If a process using the PRF trace service is running, the shared memory cannot be re-created. If you want to re-create the shared memory and start the PRF daemon, terminate the process that is using the PRF trace service.
Note that, the shared memory is re-created in the following cases:
-
When the cprfstart command is executed with the -PrfRemakeBuffer option added
-
When the cprfstart command is executed with a value different from the previous value (if value was not specified previously, specify a value other than 8194) specified in the -PrfTraceBufferSize option
502
An error occurred during creation of the necessary environment to control the PRF trace service.
1601
An error occurred in the system call.
3201
A timeout occurred when starting the PRF daemon. The PRF daemon may be running normally.
3203
An attempted exclusive control has failed.
8001
An internal error occurred.
-
-
KFCT73431-E
cannot create the process. process_name=aa....aa.
aa....aa: Process name (cprfd: PRF daemon)
- Description
-
An attempt to generate the child process has failed.
The daemon startup process terminates.
- Action
-
Wait for a while, and then restart or check the following details:
-
Are the system file resources insufficient?
-
Has the generation of child processes failed?
-
Is the memory insufficient?
Also, see the message KFCT73430-E output before this message, and then remove the cause of the error.
-
-
KFCT73432-W
failure to initialize for prf tracing service. ID: aa....aa reason code bb....bb - cc....cc.
aa....aa: PRF identifier
If the PRF identifier cannot be identified, **** is displayed.
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
An attempt to initialize the PRF trace service failed.
The acquisition of PRF trace of the process in which an error occurred will be suspended.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. Furthermore, if an internal error occurs, contact maintenance personnel.
Table 19‒34: List of failure reason codes displayed in KFCT73432-W Reason code
Cause
117
The specified option is invalid.
8001
An internal error occurred.
-
KFCT73433-E
cannot stop CPRFD. ID= aa....aa reason code = bb....bb - cc....cc.
aa....aa: PRF identifier
If the PRF identifier cannot be identified, **** is displayed.
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
An attempt to stop the PRF daemon has failed.
The cprfstop command terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. If the PRF daemon is not terminated, re-execute the cprfstop command. However, when exclusive control fails, an internal error occurs, and a message other than the listed reason codes appears, contact maintenance personnel.
Table 19‒35: List of reason codes displayed in KFCT73433-E Reason code
Cause
106
The environment variable PRFSPOOL may not have been specified or the directory specified in the environment variable PRFSPOOL may not have been created correctly.
115
An attempt to access the shared memory used in the PRF trace service failed. Specify -Force option, and then execute the command.
117
The specified option is invalid.
3201
A timeout occurred. Specify -Force option, and then execute the command.
3202
The PRF daemon with the specified PRF identifier is not running.
3203
An attempted exclusive control has failed.
8001
An internal error occurred.
-
KFCT73434-E
CPRFD is already started. ID= aa....aa.
aa....aa: PRF identifier
- Description
-
A PRF daemon with the specified PRF identifier is already running.
The cprfstart command terminates with an error.
A PRF daemon with the same PRF identifier as a PRF daemon that is already running cannot be started.
- Action
-
Check whether a PRF daemon with the same PRF identifier is running. After this check, if required, specify a different PRF identifier, and then re-execute the cprfstart command.
-
KFCT73435-E
CPRFD has not started. ID=aa....aa.
aa....aa: PRF identifier
- Description
-
A PRF daemon with the specified PRF identifier is not running.
The command terminates with an error.
- Action
-
Check whether a PRF daemon with the specified PRF identifier is running. Note that this message may also be displayed when the PRF daemon is running. In such cases, check that the -PRFID option, specified when the command starts, is correct or check that the running PRF daemon and the environment variable PRFSPOOL are different.
-
KFCT73436-E
PRFSPOOL environment is undefined.
- Description
-
The environment variable PRFSPOOL is not specified.
The process terminates with an error.
- Action
-
Confirm that the environment variable PRFSPOOL is specified. Specify a valid environment variable PRFSPOOL, and then re-execute the process.
-
KFCT73437-E
cannot find PRFSPOOL directory.
- Description
-
The directory described in the environment variable PRFSPOOL was not found.
The process terminates with an error.
- Action
-
Confirm that the directory described in the environment variable PRFSPOOL is correctly created. Create the directory described in the environment variable PRFSPOOL correctly, and then re-execute the process.
-
KFCT73438-E
cannot change prf trace level. ID= aa....aa reason code = bb....bb - cc....cc.
aa....aa: PRF identifier
If the PRF identifier cannot be identified, **** is displayed.
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
The PRF trace level cannot be changed.
The cprflevel command terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. After the cause of the error is removed, re-execute the cpflevel command. However, when exclusive control fails, an internal error occurs, and a message other than the listed reason codes appears, contact maintenance personnel.
Table 19‒36: List of reason codes described in KFCT73438-E Reason code
Cause
106
The environment variable PRFSPOOL may not have been specified or the directory specified in the environment variable PRFSPOOL may not have been created correctly.
117
The specified option is invalid.
3202
The PRF daemon with the specified PRF identifier is not running.
3203
An attempted exclusive control has failed.
8001
An internal error occurred.
-
KFCT73439-E
cannot execute aa....aa command. reason code bb....bb - cc....cc.
aa....aa: Name of the command that cannot be executed
bb....bb: Reason code
cc....cc: Internal system code
- Description
-
The command (aa....aa) cannot be executed.
The command terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. However, when exclusive control fails, an internal error occurs, and a message other than the listed reason codes appears, contact maintenance personnel.
Table 19‒37: List of reason codes displayed in KFCT73439-E Reason code
Cause
106
The environment variable PRFSPOOL may not have been specified or the directory specified in the environment variable PRFSPOOL may not have been created correctly.
115
An attempt to access the shared memory used in the PRF trace service failed.
117
The specified option is invalid.
3201
A timeout occurred. If this message is displayed while executing the cprfflush command, the writing to the trace information file in the buffer may have finished.
3202
The PRF daemon with the specified PRF identifier is not running.
3203
An attempted exclusive control has failed.
8001
An internal error occurred.
-
KFCT73440-E
cannot read trace-file.
- Description
-
An error occurred while reading the trace file in the PRF trace editing process.
The command terminates with an error.
- Action
-
Confirm the following details:
-
The trace file may not be specified in the edit command. Specify the trace file with -TraceFile (for Windows).
-
Check if the specified trace file is valid and the access permission is available and, if necessary, revise it.
Also, see the message KFCT75500-E displayed before this message and remove the cause of the error.
-
-
KFCT73441-E
-PrfTraceBufferSize value is over -PrfTraceFileSize value.
- Description
-
The specified value of the -PrfTraceBufferSize option exceeds the value of the -PrfTraceFileSize option. The startup command terminates with an error.
- Action
-
Check whether the specified value of the -PrfTraceBufferSize option exceeds the -PrfTraceFileSize option. Also, if the -PrfTraceFileSize option is not specified, confirm that the specified value of the -PrfTraceBufferSize option is 8192 or less.
If the specified value of the -PrfTraceBufferSize option exceeds the -PrfTraceFileSize option, in the -PrfTraceBufferSize option, specify a value less than or equal to the value of the -PrfTraceFileSize option.
-
KFCT73445-E
cannot output trace information to a trace-file.
- Description
-
The trace information cannot be output to a file.
The output of the trace file will be stopped. This message is displayed when the buffer for acquiring PRF trace is insufficient.
- Action
-
Forcibly stop a running PRF daemon. After this, normally start the PRF daemon. To stop the PRF daemon forcibly, add the -Force option to the cprfstop command, and then execute the command.
Also, in order to avoid this error, we recommend that you set the buffer size for acquiring PRF trace to a value greater than the default value (8192 kilobytes). For details on changing the buffer size, see the cprfstart command in the manual uCosminexus Application Server Command Reference Guide.
-
KFCT73501-E
process aborted.(reason=aa....aa)
aa....aa: Reason for the inability to continue the process
- Description
-
The processing cannot be continued, so the processing will be suspended.
One of the following reasons will be displayed in aa....aa:
-
An attempt to cancel the exclusion between threads has failed.
-
An attempt to cancel the exclusion between processes has failed.
-
- Action
-
Memory used in the operation may be insufficient. Increase the memory of the operating environment.
If this error continues to occur frequently, contact system administrator.
-
KFCT73502-W
cannot load library.
- Description
-
The environment variable that specifies the library storage directory or the version of Cosminexus TPBroker being used is invalid.
The processing continues. However, all the messages from the process in which this message was output are output in standard output or standard error output and are not output in system log, CTM log, and CTM domain log.
- Action
-
Change the environment variable that specifies the library storage directory or install the valid version of Cosminexus TPBroker, and then re-execute the process.
-
KFCT73551-E
cannot get aa....aa.
aa....aa: Name of the information that cannot be acquired
- Description
-
The aa....aa information cannot be acquired.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to confirm that the environment enables the acquisition of the information.
-
KFCT73552-E
cannot access directory indicated by aa....aa. "bb....bb"
aa....aa: Name of the information that indicates the directory
bb....bb: Directory name
- Description
-
The directory (bb....bb) cannot be accessed.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to check that the information describing the directory is valid. He also needs to check details such as the access permissions of the directory.
-
KFCT73553-E
cannot open file "aa....aa".
aa....aa: Name of the file that cannot be opened
- Description
-
The file (aa....aa) cannot be opened.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to check details such as the access permission for the files and directories.
-
KFCT73554-E
cannot read file "aa....aa".
aa....aa: Name of the file that cannot be read
- Description
-
The file (aa....aa) cannot be read.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to check details such as the access permission for the files and directories.
-
KFCT73555-E
cannot close file "aa....aa".
aa....aa: Name of the file that cannot be closed
- Description
-
The file (aa....aa) cannot be closed.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to check details such as the access permission for the files and directories.
-
KFCT73556-E
cannot access file "aa....aa".
aa....aa: Name of the file that cannot be accessed
- Description
-
The file (aa....aa) cannot be accessed.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to check details such as the access permission for the files and directories.
-
KFCT73557-E
aa....aa environment variable undefined.
aa....aa: Name of the undefined environment variable
- Description
-
The environment variable (aa....aa) is not defined.
The processing will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to define the environment variable.
-
KFCT73558-E
invalid option. option=aa....aa value=bb....bb reason=cc....cc.
aa....aa: Option name
bb....bb: Invalid option argument (cc....cc is only displayed in the case of INVALID_VALUE)
cc....cc: Reason code
- Description
-
The option is invalid.
The processing will be interrupted.
- Action
-
Take action based on the reason codes described in cc....cc. The following table lists the reason codes described in cc....cc and the corresponding actions.
Table 19‒38: List of reason codes displayed in KFCT73558-E Cause of error
Cause
Action
NO_OPT_ARG
The option argument is not specified.
Revise the specified value of the option, and then re-execute the command.
INVALID_VALUE
The value of the option argument is invalid.
Revise the specified value of the option, and then re-execute the command.
Others
An internal error occurred during the option analysis process.
Acquire the contents of option (aa....aa), value (bb....bb), and reason (cc....cc), and then contact maintenance personnel.
-
KFCT73559-E
the error occurred while initializing log function. reason=aa....aa detail=bb....bb inter=cc....cc.
aa....aa: Reason for occurrence of error
bb....bb: Detailed message
cc....cc: Maintenance information
- Description
-
An error occurred while initializing the log function.
The processing will be interrupted.
- Action
-
Take action based on the reasons for the error occurrence described in aa....aa, and then re-execute the command. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒39: List of causes described in KFCT73559-E Cause of error
Cause
Action
ENVIRON
An attempt to acquire the environment variables has failed.
Check whether the environment variables CTMDIR, CTMSPOOL, and PRFSPOOL have been defined and, if necessary, revise them.
FILE_ACC
An attempt to access the file has failed.
Check whether the CTMSPOOL and PRFSPOOL directories exist and whether the access permissions have been set up correctly. Also, confirm that enough free space is available in CTMSPOOL directory.
LOCK
An attempted exclusive control has failed.
If memory is insufficient, terminate the unnecessary processes or increase the memory. In other cases, contact maintenance personnel.
MEMORY
The memory is insufficient.
Terminate the unnecessary processes or increase the memory.
OTHER
An error other than that specified above occurred.
Acquire the contents of reason (aa....aa), detail (bb....bb), and inter (cc....cc), and then contact maintenance personnel.
-
KFCT73560-W
cannot get log control information, so using default value for -CTMLogFileSize and -CTMLogFileCount.
- Description
-
The CTM log control information cannot be acquired.
The default value will be set up in the maximum size (specified value of the -CTMLogFileSize option of the ctmstart command) and the maximum count (specified value of the -CTMLogFileCount option of the ctmstart command) of CTM log files and the processing continues.
-
KFCT73561-E
cannot get log control information. reason=aa....aa detail=bb....bb inter=cc....cc.
aa....aa: Reason for occurrence of error
bb....bb: Detailed message
cc....cc: Maintenance information
- Description
-
The log control information cannot be acquired.
The processing of the command terminates.
- Action
-
Take action based on the reason for the error occurrence described in aa....aa. The following table lists the reasons for the error occurrence described in aa....aa and the corresponding actions.
Table 19‒40: List of causes described in KFCT73561-E Cause of error
Cause
Action
FILE_ACC
An attempt to access the file has failed.
Confirm that the CTMSPOOL and PRFSPOOL directories exist. Also, check whether the files under the CTMSPOOL directory are edited incorrectly and whether the access permissions are changed.
NO_EXIST
The file does not exist.
After installation, check whether the ctmdmstart command, the ctmstart command, or the cprfstart command is running, or whether the files under the CTMSPOOL directory or PRFSPOOL directory are deleted incorrectly.
VERSION
The file version is unknown.
Check whether the ctmdmstart command or the ctmstart command of a version later than the ctmlogcat command is running.
Check the above details and run the ctmdmstart command or the ctmstart command of the same version as the ctmlogcat command. If the command is terminated normally, the log control information is updated and can be acquired.
-
KFCT73590-I
usage:ctmlogcat [-h] | [-d | -t ctmid]
- Description
-
This message describes the usage method of the ctmlogcat command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it. If the specified option is invalid, modify the specified option, and then re-execute the command.
-
KFCT73591-I
no aa....aa log message to output.
aa....aa: Type of log message (domain: CTM domain log or ctm: CTM log)
- Description
-
There is no log message to output.
The command has finished.
-
KFCT73592-E
the fatal error occurred, so process terminated. reason=aa....aa detail=bb....bb inter=cc....cc.
aa....aa: Reason for occurrence of error
bb....bb: Detailed message
cc....cc: Maintenance information
- Description
-
An error occurred, so the processing terminates.
- Action
-
Check the reason for the error occurrence described in aa....aa, and then take action.
The reason for the error occurrence described in aa....aa is described below:
- MEMORY
-
The memory is insufficient.
Terminate the unnecessary processes or increase the memory.
- OTHER
-
An error other than MEMORY error occurred.
Acquire the contents of reason, detail, and inter, and then contact maintenance personnel.
-
KFCT74000-E
command argument is invalid. option:aa....aa
aa....aa: Invalid option name
- Description
-
The specification of the command argument is invalid.
The command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT74001-E
this processing exceeded the maximum which was specified by the CTMClientConnectCount option. the effective option value at present is aa....aa.
aa....aa: Valid option value at present
- Description
-
The maximum value of the -CTMClientConnectCount option specified in the OTM gateway was exceeded.
The send request process will be interrupted.
The maximum value of the -CTMClientConnectCount option specified in the ORB gateway was exceeded.
The send request process will be interrupted.
- Action
-
Check the value specified in the -CTMClientConnectCount option.
Wait for the termination of the running OTM client application, and then re-execute the command. Also, if required, increase the value specified in the -CTMClientConnectCount option, and then re-execute the command.
Wait for the termination of the running CORBA client application, and then re-execute the command. Also, if required, increase the value specified in the -CTMClientConnectCount option, and then re-execute the command.
-
KFCT74002-E
memory allocation error. maintenance code:aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to acquire memory has failed.
The processing will be interrupted.
- Action
-
Contact system administrator.
Terminate the unnecessary processes or increase the memory.
-
KFCT74003-E
shared memory allocation error. maintenance code:aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to acquire shared memory has failed.
The processing will be interrupted.
- Action
-
Contact system administrator.
Modify the option argument, and then re-execute the command.
-
KFCT74004-E
cannot assign a ctmtscgwd. reason code:aa....aa .
aa....aa: Reason code
- Description
-
The OTM gateway is not allocated to the OTM client application.
- Action
-
Adjust the number of OTM client applications and the number of OTM gateways according to the reason codes described in aa....aa.
Table 19‒41: List of reason codes displayed in KFCT74004-E Reason code
Cause
Action
1
The OTM gateway is not connected to the CTM daemon.
Check whether the OTM gateway is connected to the CTM daemon.
2
There are no free connections in the OTM gateway connected to the CTM daemon.
Check the number of OTM client applications.
-
KFCT74550-E
scheduler initialization error. reason code=aa....aa
aa....aa: Reason code
- Description
-
An attempt to initialize has failed.
The startup process of the CTM daemon terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. Then re-execute the command.
Table 19‒42: List of reason codes displayed in KFCT74550-E Reason code
Cause
1
An option argument analysis error occurred.
2
The shared memory is insufficient.
3
Memory is insufficient.
4
An error occurred in the initialization process of the communication environment.
-
KFCT74551-E
command option is invalid. option:aa....aa
aa....aa: Option name
- Description
-
The argument of the command option is invalid.
The processing will be interrupted.
- Action
-
Check whether the specified option is invalid.
Modify the specified option, and then re-execute the command.
-
KFCT74552-E
memory allocation error. maintenance code:aa....aa
aa....aa: Maintenance code
- Description
-
Memory is insufficient.
The processing will be interrupted.
- Action
-
Contact system administrator.
Terminate the unnecessary processes or increase the memory.
-
KFCT74553-E
shared memory allocation error. maintenance code:aa....aa
aa....aa: Maintenance code
- Description
-
An attempt to secure the shared memory has failed.
The processing will be interrupted.
- Action
-
Contact system administrator.
Modify the option argument, and then re-execute the command.
-
KFCT74554-E
cache memory allocation error. allocation size=aa....aa maintenance code:bb....bb
aa....aa: Size that the user tried to secure
bb....bb: Maintenance code
- Description
-
An attempt to secure the server cache memory of the CTM daemon has failed.
The processing will be interrupted.
- Action
-
Contact system administrator.
Modify the argument of the -CTMServerCacheSize option in the ctmstart command, and then re-execute the command.
-
KFCT74555-W
this processing exceeded the maximum request registration. CTM queue name:aa....aa reason code:bb....bb
aa....aa: CTM queue name
bb....bb: Reason code (Max_Request: Value specified in the -CTMMaxRequestCount option of the ctmstart command was exceeded, so the request cannot be registered)
- Description
-
The maximum number of requests registered in the CTM queue was exceeded, so the request is not registered.
The processing continues.
This message is displayed for each CTM queue. After this message is displayed, the message will not be displayed for the same CTM queue for 60 seconds.
- Action
-
Use the ctmlsque command and check the number of registered requests.
If the service processes registered in the J2EE application are being delayed, remove the cause of the problem.
If the processing capability of the J2EE application is inadequate, increase the number of concurrent executions of schedule queues or the J2EE servers with the same J2EE application, revise the value specified in the -CTMMaxRequestCount option of the ctmstart command, and then restart the CTM daemon.
-
KFCT74556-E
cannot return the reply of the request. client ip:aa....aa client pid:bb....bb communication no:cc....cc,dd....dd
aa....aa: Client IP address of a destroyed request
bb....bb: Client process ID of destroyed request
cc....cc: Maintenance information 1
dd....dd: Maintenance information 2
- Description
-
The response of the request cannot be returned. The processing continues.
- Action
-
Increase the regulator process count.
-
KFCT74557-W
decline in the rate of processing was detected by the stay watch function. CTM queue name : aa....aa decision data : bb....bb/cc....cc/dd....dd/ee....ee/ff....ff/gg....gg
aa....aa: CTM queue name
bb....bb: Request accumulation count when checked just before stopping the system
cc....cc: Number of requests processed within the monitoring time
dd....dd: Monitoring state transition threshold value
ee....ee: System termination transition threshold value
ff....ff: Monitoring time interval
gg....gg: Termination mode
- Description
-
A decline in the processing rate was detected by the stay watch functionality of the schedule queue.
- Action
-
See the PRF trace file and statistical information file, track the reason due to which the process cannot be executed, and then revise the queue stay watch settings.
-
KFCT74558-E
cannot increase thread. CTMDispatchParallelCount=aa....aa. CTM queue name:bb....bb change count=cc....cc reason code:dd....dd
aa....aa: Upper limit of the thread count that can be managed with the CTM daemon
bb....bb: CTM queue name
cc....cc: Current execution count specified with the ctmchpara command
dd....dd: Reason code
ParallelCount: The upper limit of the number of threads that can be started in one J2EE server was exceeded.
DispatchParallelCount: The upper limit of the number of threads that can be managed with the CTM daemon was exceeded.
- Description
-
The upper limit of the threads distributed to a J2EE server in the CTM daemon has exceeded the number of concurrent executions specified with the ctmchpara command.
The change process will not be executed by the ctmchpara command.
- Action
-
Check the following details for each reason code described in dd....dd, and then take the corresponding actions:
- ParallelCount
-
Specify a value that does not exceed the upper limit of the number of threads that can run on one J2EE server ((127) × share count of a schedule queue) in the ctmchpara command.
- DispatchParallelCount
-
Specify a value that does not exceed aa....aa in the ctmchpara command or revise the concurrent execution count of another queue.
-
KFCT74559-E
cannot change the ParallelCount.error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred while changing the number of concurrent executions.
The processing will be interrupted without performing the change process using the ctmchpara command.
- Action
-
Confirm the following details, and then take action:
-
The value specified in the maximum value of the EJB pool count is Unlimited or a value of 127 or more is not specified
Set the maximum value of the EJB pool count as Unlimited or 127 or more, and then restart the J2EE application.
-
Does the ejbCreate() method consume time internally?
Set a large value for the value in the ejbserver.ctm.ActivateTimeOut property, and then restart the J2EE application.
-
Are the threads insufficient?
Increase the settings for the upper limit of the thread resources.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT74600-I
aa....aa is placed in shutdown state by bb....bb.
aa....aa: Locked CTM queue name
bb....bb: Lock mode
normal: Normal lock
force: Forced lock
timeout: Timeout lock
- Description
-
The schedule of the CTM queue (aa....aa) is locked.
- Action
-
Check the following details for each lock mode described in bb....bb, and then take actions:
- In the case of normal or force
-
The schedule was locked by the ctmholdque command.
Execute the ctmrlesque command to release the lock.
- In the case of timeout
-
The schedule is locked by the timeout lock functionality.
Investigate the cause for the occurrence of timeout and to release the lock, execute the ctmrlesque command.
-
KFCT74601-I
aa....aa restarted.
aa....aa: Name of the CTM queue for which the lock was released
- Description
-
The schedule of the CTM queue (aa....aa) was unlocked.
-
KFCT74604-I
the ParallelCount of aa....aa was changed to bb....bb.
aa....aa: CTM queue name
bb....bb: Valid value of the number of concurrent executions after change
- Description
-
The number of concurrent executions of the CTM queue (aa....aa) was changed to bb....bb.
-
KFCT74700-E
aa....aa command is used invalidly.
aa....aa: Command name
- Description
-
The usage method of the command (aa....aa) is invalid.
The command terminates with an error.
- Action
-
Check whether the option specified in the command is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT74701-E
error occurred during aa....aa command processing. reason code=bb....bb
aa....aa: Command name
bb....bb: Reason code
- Description
-
An error occurred during the command process.
The command terminates with an error.
- Action
-
Based on the list of reason codes described in the following table, investigate the cause, and then remove the cause of the error. Then re-execute the command.
Table 19‒43: List of reason codes displayed in KFCT74701-E Reason code
Cause
1
The CTM daemon is not running.
2
An attempt to secure the shared memory has failed.
3
A timeout occurred.
4
A communication error occurred.
5
An attempt to secure the process-specific memory has failed.
6
The version does not match with that of the CTM daemon.
7
The upper limit of threads that can be generated in the CTM daemon was exceeded.
8
An attempt to add threads in the CTM daemon has failed.
9
An attempted exclusive processing in the CTM daemon has failed.
10
An internal contradiction occurred.
11
The ctmstart -CTMQueueDeleteWait is valid, so the command is not accepted.
-
KFCT74702-E
aa....aa specified with bb....bb command do not match.
aa....aa: Command name
bb....bb: Option argument name
- Description
-
The argument (bb....bb) of the option specified in the (aa....aa) command is invalid.
The command terminates with an error.
- Action
-
Check the argument of the option.
Modify the specified option, and then re-execute the command.
-
KFCT74703-E
aa....aa specified with ctmholdque command is already in shutdown state. CTMDomain:bb....bb CTMID:cc....cc
aa....aa: CTM queue name
bb....bb: CTM domain name
cc....cc: CTM identifier
- Description
-
The CTM queue specified with the ctmholdque command is locked.
The command terminates with an error.
- Action
-
Check the argument of the option.
Modify the specified option, and then re-execute the command.
-
KFCT74704-E
failed in placing all ctm_queue in shutdown state. CTMDomain:aa....aa CTMID:bb....bb
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
An error occurred in the locking process of all the CTM queues.
The command terminates with an error.
- Action
-
Check the argument of the option.
Modify the specified option, and then re-execute the command.
-
KFCT74705-E
aa....aa specified with ctmrlesque command is not in shutdown state. CTMDomain:bb....bb CTMID:cc....cc
aa....aa: CTM queue name
bb....bb: CTM domain name
cc....cc: CTM identifier
- Description
-
The CTM queue specified in the ctmrlesque command is not blocked.
The command terminates with an error.
- Action
-
Check the argument of the option.
Modify the specified option, and then re-execute the command.
-
KFCT74706-E
failed restarting all ctm_queue in shutdown state. CTMDomain:aa....aa CTMID:bb....bb
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
An error occurred in the lock releasing process of all the CTM queues.
The command terminates with an error.
- Action
-
Check the argument of the option.
Modify the specified option, and then re-execute the command.
-
KFCT74750-I
usage:ctmlsque [-CTMDomain domain_name] [-CTMID ctmid]
[-CTMQueue CTM queue name] [-CTMMyHost host_name] [-CTMInterface [interface_name]]
[-CSV] [-CTMAppInfo][-h]
- Description
-
This message describes the usage method of the ctmlsque command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT74752-I
usage:ctmholdque [-CTMDomain domain_name][-CTMID ctmid]
{-CTMQueue CTM queue name | -CTMQueueALL} [-CTMMyHost host_name]
[[-CTMRequestLeave] [-CTMTimeOut time] | [-CTMChangeServer]] [-CTMForce] [-h]
- Description
-
This message describes the usage method of the ctmholdque command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT74753-I
usage:ctmrlesque [-CTMDomain domain_name] [-CTMID ctmid]
{-CTMQueue CTM queue name | -CTMQueueALL} [-CTMMyHost host_name] [-h]
- Description
-
This message describes the usage method of the ctmrlesque command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT74755-I
usage:ctmchpara [-CTMDomain domain_name] [-CTMID ctmid]
[-CTMMyHost host_name] [-CTMTimeOut time] -CTMQueue CTM queue name
-CTMChangeCount count [-h]
- Description
-
This message describes the usage method of the ctmchpara command. This error message is displayed when the command format is invalid or when the -h option is specified.
If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT75000-E
command argument is invalid. option name:aa....aa
aa....aa: Invalid option name
- Description
-
The specification of the command argument is invalid.
The command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT75001-E
this processing exceeded the maximum which was specified by the CTMClientConnectCount option. the effective option value at present is aa....aa.
aa....aa: Valid option value at present
- Description
-
The maximum value specified in the -CTMClientConnectCount option was exceeded.
The startup of the CTM regulator or the OTM gateway will be interrupted.
- Action
-
Check the value specified in the -CTMClientConnectCount option.
Wait for a running CTM regulator or an OTM gateway to terminate, and then re-execute the command. Also, if required, modify the -CTMClientConnectCount option, and then re-execute the command.
-
KFCT75002-E
this processing exceeded the maximum which was specified by the CTMServerConnectCount option. The effective option value at present is aa....aa.
aa....aa: Valid option value at present
- Description
-
The maximum value specified in the -CTMServerConnectCount option was exceeded.
The processing of the J2EE server will be interrupted.
- Action
-
Check the value specified in the -CTMServerConnectCount option.
If required, modify the value specified in the -CTMServerConnectCount option, and then re-execute the command.
-
KFCT75003-E
the error occurred in the initialization processing of CTM-daemon. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred in the initialization process of the CTM daemon.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to investigate the cause of abnormal termination, and then restart the CTM daemon.
-
KFCT75004-E
the error occurred by the lock control processing of the shared memory access.
- Description
-
An error occurred during the exclusive control processing of shared memory access.
The processing will now stop.
- Action
-
Contact system administrator.
Modify the option argument, and then re-execute the command.
-
KFCT75005-E
the error occurred by the registration processing of a communication object. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred while registering the communication object.
The processing will now stop.
- Action
-
Confirm the following details, and then take action:
-
Is osagent abended?
Restart osagent, and then re-execute the command.
-
Is osagent overloaded?
Terminate the unnecessary processes.
-
Is the memory insufficient?
Increase the memory, if required.
-
-
KFCT75050-E
the error occurred by the lock acquisition processing of the lock resources. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred during the lock acquisition process for the lock resources.
The processing will now stop.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, either terminate the unnecessary processes or increase the memory.
-
KFCT75051-E
the error occurred by the lock release processing of the lock resources. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred during the lock release processing of the lock resources.
The processing will now stop.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, either terminate the unnecessary processes or increase the memory.
-
KFCT75052-E
the error occurred by the generation processing of a thread. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred while generating threads.
The processing will now stop.
- Action
-
Confirm the following details, and then take action:
-
Are the thread resources insufficient?
Increase the settings for the upper limit of the thread resources.
-
Is the memory insufficient?
Terminate the unnecessary processes or increase the memory.
-
-
KFCT75053-E
the memory allocation failed. maintenance code1=aa....aa maintenance code2=bb....bb
aa....aa: Maintenance code1
bb....bb: Maintenance code2
- Description
-
An attempt to allocate memory has failed.
The processing will now stop.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, either terminate the unnecessary processes or increase the memory, if required.
-
KFCT75054-E
the error occurred by the generation processing of lock resources. error code=aa....aa maintenance code1=bb....bb maintenance code2=cc....cc
aa....aa: Maintenance error code
bb....bb: Maintenance code1
cc....cc: Maintenance code2
- Description
-
An error occurred while generating the lock resources.
The processing will now stop.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, either terminate the unnecessary processes or increase the memory, if required.
-
KFCT75122-E
the error occurred in the deactivation processing of CTM queue. Queue name:aa....aa maintenance code=bb....bb
aa....aa: CTM queue name
bb....bb: Maintenance information
- Description
-
An error occurred while locking the CTM queue (aa....aa).
The processing continues.
- Action
-
See the message KFCT75499-E, and then remove the cause of the error. If the cause of the error is unknown, acquire the maintenance code, and then contact maintenance personnel.
-
KFCT75127-W
the length of CTM queue is already specified. name=aa....aa set length=bb....bb activate length=cc....cc.
aa....aa: CTM queue name
bb....bb: Length of the CTM queue specified in the J2EE server
cc....cc: Length of the generated CTM queue
- Description
-
CTM queues have been generated with different lengths. The length of the generated CTM queue will become valid.
The processing continues.
- Action
-
If you want to create a CTM queue with the specified length, either specify a different CTM queue name, or delete the target CTM queue, and then re-execute the command.
-
KFCT75201-E
invalid argument value is specified. name=aa....aa, bb....bb=cc....cc.
aa....aa: Method name
bb....bb: Argument name
cc....cc: Specified value
- Description
-
The specified value (cc....cc) of argument (bb....bb) of method (aa....aa) is invalid.
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact maintenance personnel.
-
KFCT75202-E
cannot get property. name=aa....aa.
aa....aa: Property name
- Description
-
An attempt to acquire the property (aa....aa) has failed.
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact System Administrator.
-
KFCT75204-E
invalid property value is specified. aa....aa=bb....bb.
aa....aa: Property name
bb....bb: Property value
- Description
-
An attempt to acquire the property value (bb....bb) has failed.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to modify the specified value of the property, and then re-execute the command.
-
KFCT75206-E
internal error occurred. name=aa....aa.
aa....aa: Maintenance information
- Description
-
An internal contradiction occurred.
The processing will now stop.
- Action
-
Contact system administrator.
-
KFCT75207-E
it has already created CTM queue. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The specified CTM queue (aa....aa) is already generated.
The processing will now stop.
- Action
-
Contact system administrator.
Restart the J2EE application after the system administrator changes the CTM queue name.
-
KFCT75208-E
an error occurred in the communication CTM-daemon. reason=aa....aa. mainteance code=bb....bb.
aa....aa: Reason code
bb....bb: Maintenance code
- Description
-
An error occurred in the communication with the CTM daemon.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to check the reason codes described in aa....aa, and then take action. The reason codes described in aa....aa are as follows:
- DAEMON_FAILURE
-
An error occurred in the daemon.
See the message KFCT75499-E, and then remove the cause of the error. Take action, and then re-execute the command.
- SEND_FAILURE
-
An error occurred during the communication with the daemon.
Confirm that the CTM daemon is running.
- TIMED_OUT
-
A timeout occurred during the communication with the daemon.
If required, increase the value of ejbserver.ctm.ActivateTimeOut key and ejbserver.ctm.DeactivateTimeOut key, and then re-execute the process.
-
KFCT75209-E
the specified JNDI lookup name has already been registered. name=aa....aa.
aa....aa: JNDI lookup name
- Description
-
The specified JNDI lookup name (aa....aa) is registered.
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact maintenance personnel.
-
KFCT75210-E
the specified JNDI lookup name is not existed. name=aa....aa.
aa....aa: JNDI lookup name
- Description
-
The specified JNDI lookup name (aa....aa) does not exist.
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact maintenance personnel.
-
KFCT75211-E
Stateless Session Bean is not registered in CTM queue. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The Stateless Session Bean is not registered in the CTM queue (aa....aa).
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact maintenance personnel.
-
KFCT75212-I
the activation of CTM queue is completed. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The activation of the CTM queue (aa....aa) is finished.
The processing continues.
-
KFCT75213-I
the deactivation of CTM queue is completed. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The deactivation of the CTM queue (aa....aa) is finished.
The processing continues.
-
KFCT75214-E
the error occurred in activation of CTM queue. name=aa....aa.
aa....aa: CTM queue name
- Description
-
An error occurred in the activation of the CTM queue (aa....aa).
The startup process of the J2EE application will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. Remove the cause of the error, and then re-execute the process.
-
KFCT75215-E
the error occurred in deactivation of CTM queue. name=aa....aa.
aa....aa: CTM queue name
- Description
-
An error occurred in the deactivation of the CTM queue (aa....aa).
The termination process of the J2EE application will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. Remove the cause of the error, and then re-execute the process.
If the error recurs, the connection with the CTM daemon may have failed. Confirm that the CTM daemon is running.
-
KFCT75216-E
invalid version protocol. reason=aa....aa.
aa....aa: Reason code
- Description
-
The versions in the CTM communication protocol are incompatible.
The processing will now stop.
- Action
-
Acquire the maintenance information, and then contact System Administrator.
The System Administrator needs to see the reason codes described in aa....aa, and then take action. The reason codes described in aa....aa are as follows:
- INCOMPATIBLE
-
The protocol versions are incompatible.
There is a version mismatch in the CTM system daemons or in the application programs included in the same CTM domain. Recheck the versions.
- NOT_IGNORE
-
Information that cannot be ignored exists in the communication protocol.
In some functions, the version of the processes described in the location code does not match with the versions of other processes. Recheck the versions.
-
KFCT75217-I
the connecting to CTM-daemon is started. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
The process of connecting to the CTM daemon is started.
The processing continues.
-
KFCT75218-I
the connection to CTM-daemon is completed. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
The connection to the CTM daemon is complete.
The processing continues.
-
KFCT75219-E
the connection to CTM-daemon is failed. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
An attempt to connect to the CTM daemon has failed.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. After the cause of the error is removed, restart the J2EE server.
-
KFCT75220-I
the connecting from J2EE server is started. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
The process of connecting to the CTM daemon is starting.
The processing continues.
-
KFCT75221-I
the connection from J2EE server is completed. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
The process of connecting to the CTM daemon is finished.
The processing continues.
-
KFCT75222-E
the connection from J2EE server is failed. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
An attempt to connect to the CTM daemon has failed.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. After the cause of the error is removed, restart the J2EE server.
-
KFCT75223-I
the activation of CTM queue is started. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The activation of the CTM queue (aa....aa) is starting.
The processing continues.
-
KFCT75224-I
the activation of CTM queue from J2EE server is started. name=aa....aa conn_id=bb....bb.
aa....aa: CTM queue name
bb....bb: Connection identifier
- Description
-
The activation of the CTM queue (aa....aa) in the CTM daemon is starting.
The processing continues.
-
KFCT75225-I
the activation of CTM queue from J2EE server is completed. name=aa....aa conn_id=bb....bb.
aa....aa: CTM queue name
bb....bb: Connection identifier
- Description
-
The activation of the CTM queue (aa....aa) in the CTM daemon has finished.
The processing continues.
-
KFCT75226-E
the activation of CTM queue from J2EE server is failed. name=aa....aa conn_id=bb....bb.
aa....aa: CTM queue name
bb....bb: Connection identifier
- Description
-
An attempt to activate the CTM queue (aa....aa) in the CTM daemon has failed.
The startup process of the J2EE application will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. After the cause of the error is removed, restart the J2EE application.
-
KFCT75227-I
the deactivation of CTM queue is started. name=aa....aa.
aa....aa: CTM queue name
- Description
-
The deactivation of the CTM queue (aa....aa) is starting.
The processing continues.
-
KFCT75228-I
the deactivation of CTM queue from J2EE server is started. conn_id=aa....aa.
aa....aa: Connection identifier
- Description
-
The deactivation of the CTM queue in the CTM daemon is starting.
The processing continues.
-
KFCT75229-I
the deactivation of CTM queue from J2EE server is completed. conn_id=aa....aa.
aa....aa: Connection identifier
- Description
-
The deactivation of the CTM queue in the CTM daemon is complete.
The processing continues.
-
KFCT75230-E
the deactivation of CTM queue from J2EE server is failed. conn_id=aa....aa.
aa....aa: Connection identifier
- Description
-
An attempt to deactivate the CTM queue in the CTM daemon has failed.
The termination process of the J2EE application will be interrupted.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error. After the cause of the error is removed, re-execute the deactivation of the CTM queue.
If an attempt to deactivate the CTM queue fails again, the connection with the CTM daemon may have failed. Confirm whether the CTM daemon exists.
-
KFCT75231-I
the disconnecting to CTM-daemon is started. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
The process of disconnecting the CTM daemon has started.
The processing continues.
-
KFCT75232-I
the disconnection to CTM-daemon is completed. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
The process of disconnecting the CTM daemon has finished.
The processing continues.
-
KFCT75233-E
the disconnection to CTM-daemon is failed. CTMDomain=aa....aa CTMID=bb....bb.
aa....aa: CTM domain name
bb....bb: CTM identifier
- Description
-
An attempt to disconnect the CTM daemon has failed.
The processing continues.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error.
-
KFCT75234-I
the disconnecting from J2EE server is started. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
The disconnection process is starting in the CTM daemon.
The processing continues.
-
KFCT75235-I
the disconnection from J2EE server is completed. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
The process of disconnecting the CTM daemon has finished.
The processing continues.
-
KFCT75236-E
the disconnection from J2EE server is failed. name=aa....aa conn_id=bb....bb.
aa....aa: The J2EE server name
bb....bb: Connection identifier
- Description
-
An attempt to disconnect the CTM daemon has failed.
The processing continues.
- Action
-
Contact system administrator.
The System Administrator needs to see the message KFCT75499-E, and then remove the cause of the error.
-
KFCT75237-W
the connection down from J2EE server is detected. conn_id=aa....aa.
aa....aa: Connection identifier
- Description
-
The disconnection from the J2EE server was detected.
The processing continues.
-
KFCT75238-W
the deactivation of CTM queue is not completed in terminating J2EE server. maintenance code=aa....aa.
aa....aa: Maintenance information
- Description
-
An attempt was made to stop the J2EE server when the deactivation of the CTM queue had not finished.
The processing continues.
An error will occur in the connection between the J2EE server and the CTM daemon and the termination process of the J2EE application might not end normally.
- Action
-
Contact system administrator.
The System Administrator needs to confirm that the CTM daemon exists.
-
KFCT75239-W
it is already active in destroying CTM queue. name=aa....aa.
aa....aa: CTM queue name
- Description
-
An attempt was made to delete the CTM queue when the CTM queue (aa....aa) was active.
The processing continues.
An error will occur in the connection between the J2EE server and the CTM daemon and the termination process of the J2EE application might not end normally.
- Action
-
Contact system administrator.
The System Administrator needs to confirm that the CTM daemon exists.
-
KFCT75300-E
the combination of JNDI lookup name and interface name is invalid.
JNDI lookup name=aa....aa.
registered interface=bb....bb registering interface=cc....cc.
aa....aa: JNDI lookup name
bb....bb: Registered interface name
cc....cc: Interface name that the user tried to register
- Description
-
The combination of JNDI look-up name and interface name differs from the already registered combination.
The processing of the method will be interrupted.
- Action
-
Check the combination of the JNDI look-up name and interface name. Modify the combination, and then re-execute the process.
-
KFCT75303-E
the registration to Naming Service is failed. JNDI lookup name=aa....aa maintenance code=bb....bb.
aa....aa: Failed JNDI lookup name
bb....bb: Maintenance information
- Description
-
An attempt to register to the CORBA Naming Service has failed.
The processing will now stop.
- Action
-
Check the contents that are displayed in the details, resolve the problem, and then re-execute the operation:
-
Confirm that INS is running.
-
Before starting the CTM daemon, confirm that the JNDI look-up name to be registered is not already registered.
-
Confirm that the INS registration name is valid.
-
-
KFCT75305-E
the removal from Naming Service is failed. JNDI lookup name=aa....aa maintenance code=bb....bb.
aa....aa: Failed JNDI lookup name
bb....bb: Maintenance information
- Description
-
An attempt to delete from the CORBA Naming Service has failed.
The processing continues.
- Action
-
Check whether the global CORBA Naming Service is running.
-
KFCT75306-E
the connection failure between aa....aa and CTM-daemon. maintenance code1=bb....bb maintenance code2=cc....cc.
aa....aa: Process in which disconnection was detected
CTM-regulator: CTM regulator process
OTM-gateway: OTM gateway process
bb....bb: Maintenance information 1
cc....cc: Maintenance information 2
- Description
-
A disconnection with the CTM daemon was detected.
The processing will now stop.
- Action
-
Contact system administrator.
-
KFCT75307-E
the timeout occurred. server pid=aa....aa JNDI lookup name=bb....bb interface=cc....cc operation=dd....dd.
aa....aa: Server process ID to be connected
bb....bb: JNDI lookup name
cc....cc: Interface name
dd....dd: Operation name
- Description
-
A timeout was detected.
The processing will now stop.
- Action
-
Contact system administrator.
The System Administrator needs to investigate the cause for the occurrence of timeout, and then restart the CTM or the J2EE server.
-
KFCT75492-W
the CORBA exception was thrown in user application. class name:aa....aa minor=bb....bb completed=cc....cc
aa....aa: CORBA exception class name
If the CORBA exception class name cannot be acquired, **** will be displayed.
bb....bb: Minor code of CORBA exception
cc....cc: Completion status of the CORBA exception process
- Description
-
A CORBA exception was thrown.
The exception information will be output and then the processing continues.
- Action
-
Acquire the CORBA exception class name, minor code of CORBA exception, and the completion status of CORBA exception process and then investigate the cause.
-
KFCT75499-E
a system exception occurred. error code=aa....aa detail code=bb....bb place code=cc....cc completion status=dd....dd maintenance code=ee....ee,ff....ff,gg....gg,hh....hh.
aa....aa: Error code
bb....bb: Details code
cc....cc: Place code
dd....dd: Completion status
ee....ee: Maintenance code 1
ff....ff: Maintenance code 2
gg....gg: Maintenance code 3
hh....hh: Maintenance code 4
- Description
-
An exception is thrown in the system.
One of the following processes will be executed depending upon the importance level of the error:
-
The processing discontinues and the process will be abended.
-
The processing discontinues and the process returns to the invocation source of the service being executed.
-
The processing continues as it is.
-
- Action
-
Contact system administrator.
The System Administrator must see the error code and content code to remove the cause of the error. For details on the error code and content code, see 19.4.1 List of error codes, and 19.4.4 List of content codes. If the cause of the error is unknown, obtain the maintenance code, and then contact maintenance personnel.
-
KFCT75500-E
aa....aa(bb....bb) is failed.errno=cc....cc:dd....dd
aa....aa: System call in which the error occurred
bb....bb: Maintenance information
cc....cc: errno value of the system call
dd....dd: Details of system call error
- Description
-
An error occurred in the system call (aa....aa).
One of the following processes will be executed depending upon the importance level of the error:
-
The processing discontinues and the process will be abended.
-
The processing discontinues and the process will return to the invocation source of the service being executed.
-
The processing continues as it is.
-
- Action
-
Based on the system call name and errno value, investigate the cause in the system call reference manual of the appropriate OS.
-
KFCT75800-E
an exception occurred. code=aa....aa ExpAddr:bb....bb
aa....aa: Exception code
bb....bb: Address in which an exception was thrown
- Description
-
A structured exception of the code aa....aa was thrown during the execution of the bb....bb command.
The stack trace will be acquired and the processing will be interrupted.
- Action
-
Contact system administrator.
-
KFCT75999-E
aa....aa(bb....bb) killed by code=cc....cc
aa....aa: Internal process code that detected the error
bb....bb: Terminated process ID
cc....cc: Abort code (Abnormal termination reason code )
- Description
-
The CTM and PRF service was terminated since an error occurred.
One of the following processes will be executed depending upon the importance level of the error:
-
CTM domain manager process will be abended.
-
The CTM daemon process will be abended.
-
The CTM regulator process will be abended.
-
The OTM gateway process will be abended.
-
The PRF daemon process will be abended.
-
The EJB client application process will be abended.
-
The J2EE server process will be abended.
-
- Action
-
Contact system administrator.
Investigate the abnormal termination reason code, and then restart the application programs of CTM, PRF, or EJB. For details on the abort code, see 19.5 List of abort codes.
-
KFCT76000-I
usage:ctmver -h | file_path
- Description
-
This message describes the usage method of the ctmver command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT76001-I
usage:ctmjver -h | file_path
- Description
-
This message describes the usage method of the ctmjver command.
This error message is displayed when the command format is invalid or when the -h option is specified. If the command format is invalid, the command terminates with an error.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT76002-E
the memory allocation failed.
- Description
-
An attempt to allocate memory has failed.
The processing will now stop.
- Action
-
Check whether the memory is insufficient.
If the memory is insufficient, either terminate the unnecessary processes or increase the memory, if required.
-
KFCT76003-E
the setting of an environment variable is unreasonable. environment variable name:aa....aa
aa....aa: Invalid environment variable name
- Description
-
The specified environment variable (aa....aa) is invalid.
The processing will now stop.
- Action
-
Check whether the specified environment variable is invalid and, if necessary, revise it.
Modify the specified environment variable, and then re-execute the command.
-
KFCT76004-E
the specified file path is unreasonable. file path:aa....aa
aa....aa: Invalid file path name
- Description
-
The specified file path (aa....aa) is invalid.
The processing will now stop.
- Action
-
Check whether the specified file path is invalid and, if necessary, revise it.
Modify the specified file path, and then re-execute the command.
-
KFCT76005-E
the specified file path is too long.
- Description
-
The specified file path is too long.
The processing will now stop.
- Action
-
Check whether the character string length of the specified file path has exceeded 255 bytes and, if necessary, revise it.
Modify the specified file path, and then re-execute the command.
-
KFCT76006-E
command argument is invalid.
- Description
-
An invalid value is specified in the command argument.
The processing will now stop.
- Action
-
Check whether the specified option is invalid and, if necessary, revise it.
Modify the specified option, and then re-execute the command.
-
KFCT76007-E
the specified file path doesn't exist. file path:aa....aa
aa....aa: Specified file path name
- Description
-
The specified file path (aa....aa) does not exist.
The command terminates with an error.
- Action
-
Check whether the specified file path is invalid and, if necessary, revise it.
Modify the specified file path, and then re-execute the command.
-
KFCT76008-E
the version information doesn't exist in the specified file path.
- Description
-
The version information does not exist in the specified file path.
The command terminates with an error.
- Action
-
Check whether the specified file path is invalid and, if necessary, revise it.
Modify the specified file path, and then re-execute the command.
-
KFCT76009-E
permission denied. file path:aa....aa
aa....aa: Specified file path name
- Description
-
There is no permission to access the specified file.
The command terminates with an error.
- Action
-
Revise the access permissions of the specified file path.
Use the chmod command to modify the access permissions of the file path, and then re-execute the command.
-
KFCT76010-E
cannot get version information. reason code=aa....aa
aa....aa: Reason code
- Description
-
An error occurred while acquiring the version information.
The command terminates with an error.
- Action
-
Take action based on the reason codes described in aa....aa. The following table lists the reason codes described in aa....aa and the corresponding actions.
Table 19‒44: List of reason codes described in KFCT76010-E Reason code
Cause
Action
1
The settings of the environment variable CTMDIR are invalid.
Modify the environment variable CTMDIR appropriately.
2
An attempt to install has failed.
Re-install the Java application.
3
The settings of the environment variable CTMDIR are invalid or the installation has failed.
Modify the environment variable CTMDIR appropriately. Otherwise, re-install the Java application.
-
KFCT76014-E
the wrong library was loaded. Name:aa....aa PP-No:bb....bb Version:cc....cc
aa....aa: Library file name
bb....bb: Product code
cc....cc: Product version
- Description
-
An invalid library was loaded.
The processing of the daemon and the command will be interrupted.
- Action
-
Revise the settings for the installation environment and the environment variable. Modify the settings, and then re-execute the command.