15.2 Messages beginning with KEUC
This section describes the messages from KEUC00001 to KEUC09999 that are output when you switch an already built execution environment.
-
KEUC00001-I (C)
The cosmienv aa....aa command will now start.
aa....aa: -s, -d, -r, or -l
- Description
-
The cosmienv aa....aa command is started.
-
KEUC00002-I (C)
The cosmienv aa....aa command ended successfully.
aa....aa: -s, -d, -r, or -l
- Description
-
The cosmienv aa....aa command ended successfully.
-
KEUC00003-E (C)
Execution of the cosmienv aa....aa command failed. (code = bb....bb[, cc....cc])
aa....aa: -s, -d, -r, or -l
bb....bb: Return code
cc....cc: Maintenance code
- Description
-
An attempt to execute the cosmienv aa....aa command has failed.
- Action
-
Check the return code output to the message, and take action. Note that when the return code is 143, the maintenance code is also displayed in sync.
For details about return codes and actions, reference the following table.
Table 15‒1: Return codes and actions Return code
Meaning
Action
0
Normal termination
--
128
Abnormal termination
Acquire the output message and log, and contact maintenance personnel.
129
The information which is the basis of storage or restoration operation is incorrect
130
An error has occurred in the post-processing of storage or restoration operation
131
The information required for storage or restoration operation is incorrect
Check that the installed product version supports switching of the built execution environments. If the problem is still not resolved, acquire the output message and log, and contact maintenance personnel.
133
Disk access error
Acquire the output message and log, and contact maintenance personnel.
135
File open error
Acquire the output message and log, and contact maintenance personnel.
138
An invalid argument is specified
Check the command syntax.
139
An unsupported function is requested
Check the installed products.
140
An execution request is sent for an already running command
Make sure that the command is not running.
141
The operating environment is invalid
Before you execute the recovery function, check the following contents:
-
Cosminexus must be uninstalled
-
Unnecessary files must not be present in the installation destination
142
Execution permission is not available
Check the permissions when the command is issued.
143
A failure has occurred while processing the component software
Check the maintenance code (cc....cc of bb....bb[,cc....cc]) of the component software displayed in the message. For details about maintenance codes, reference the following table.
For the error-generating component software, check the cosmienv command log.
Table 15‒2: Maintenance codes of the component software Component software
Maintenance code
Meaning
Action
Cosminexus Component Container
145
An attempt to install HNTRLib has failed
Re-install Cosminexus Component Container.
146
An attempt to execute the storage operation has failed
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
147
Abnormal termination
Collect the files present below /opt/Cosminexus/env/log, and then contact maintenance personnel.
Cosminexus Component Transaction Monitor
129
The information which is the basis of storage or restoration operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
130
A post-processing error of storage or restoration operation
131
The information required for storage or restoration operation is incorrect
138
An invalid argument is specified
142
The executing user is an unauthorized user
Confirm that the process is executed with root authority.
146
The storage directory does not exist
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
147
Other errors
Acquire the output message and log, and contact maintenance personnel.
148
An attempt to delete the file or directory has failed
Cosminexus DABroker Library
128
Abnormal termination
Acquire the output message and log, and contact maintenance personnel.
131
The information required for storage or restoration operation is incorrect
138
An invalid argument is specified
Check the command arguments, and re-execute the process.
144
The Cosminexus DABroker Library is running
Terminate all programs that are currently accessing the Cosminexus DABroker Library, and re-execute the process.
Cosminexus Developer's Kit for Java
131
The information required for storage or deletion operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
138
An invalid argument is specified
Acquire the output message and log, and contact maintenance personnel.
144
An attempt to execute the Recover operation has failed
Acquire the output message and log, and contact maintenance personnel.
145
/opt/Cosminexus/jdk is a symbolic link file
/opt/Cosminexus/jdk is not supported if it is a symbolic link file. Set the entity file.
146
Other errors
Acquire the output message and log, and contact maintenance personnel.
Cosminexus Performance Tracer
129
The information which is the basis of storage or restoration operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
130
A post-processing error of storage or restoration operation
131
The information required for storage or restoration operation is incorrect
138
An invalid argument is specified
142
The executing user is an unauthorized user
Confirm that the process is executed with root authority.
145
An attempt to install HccLib has failed
Re-install the Java application.
146
The storage directory does not exist
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
147
Other errors
Acquire the output message and log, and contact maintenance personnel.
148
An attempt to delete the file or directory has failed
Cosminexus Reliable Messaging
129
The information which is the basis of storage or restoration operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
130
An error has occurred in the post-processing of storage or restoration operation
144
An attempt to install HNTRLib2 has failed
Re-install the Java application.
145
The storage directory does not exist
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
146
Other errors
Acquire the output message and log, and contact maintenance personnel.
Cosminexus TPBroker
129
The information which is the basis of storage or restoration operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
130
An error has occurred in the post-processing of storage or restoration operation
131
The information required for storage or restoration operation is incorrect
133
Disk access error
135
File open error
144
An attempt to install HCCLib has failed
Re-install Cosminexus TPBroker.
145
An attempt to install HNTRLib2 has failed
146
An attempt to execute the storage operation has failed
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
147
An attempt to acquire or set up Hitachi PP installer information has failed
Acquire the output message and log, and contact maintenance personnel.
Cosminexus Web Services - Security
129
The information which is the basis of storage or restoration operation is incorrect
Acquire the output message and log, and contact maintenance personnel.
130
An error has occurred in the post-processing of storage or restoration operation
Acquire the output message and log, and contact maintenance personnel.
131
The information required for storage or restoration operation is incorrect
138
An invalid argument is specified
146
An attempt to execute the storage operation has failed
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
147
Other errors
Acquire the output message and log, and contact maintenance personnel.
148
An attempt to delete the file or directory has failed
Cosminexus XML Processor
128
Abnormal termination
Acquire the output message and log, and contact maintenance personnel.
138
An invalid argument is specified
Check the command arguments, and re-execute the process.
144
An attempt to execute the storage operation has failed
Take action using the following procedure:
-
Create the specified storage directory. or specify an existent directory path.
-
Terminate the usage of Cosminexus XML Processor.
145
An attempt to install HNTRLib2 has failed
Re-install Cosminexus XML Processor.
Cosminexus HTTP Server
128
Abnormal termination
Acquire the output message and log, and contact maintenance personnel.
138
An invalid argument is specified
144
An attempt to execute the storage operation has failed
Take action with any of the following methods:
-
Create the specified storage directory.
-
Specify an existent directory path.
-
-
KEUC00004-I (C)
Command usage: cosmienv <options> [-I<identifier>] [-P<save-path>] [-f]
<options>:
-s - saves the Cosminexus environment
-d - deletes the saved Cosminexus environment
-r - restores the saved Cosminexus environment
-l - lists the saved Cosminexus environment
-h - displays this help information
<identifier>:
Specify a unique identifier to distinguish the Cosminexus environment to be saved.
Use a maximum of 20 alphanumeric characters.
This identifier must be specified when the -s,-d, or -r option is used.
<save-path>:
Specify the full path of the Cosminexus environment to be saved.
You cannot specify a 1-byte space, 2-byte space, or tab character in a path name.
The save destination of the Cosminexus environment becomes <save-path>/<identifier>.
This save path must be specified when the -s option is used.
<-f>:
When the -r option is specified, specify the -f option to force restoration of the Cosminexus environment.
If the -f option is specified, the Cosminexus environment will be restored even if there are files remaining in the Cosminexus installation directory.
If the -f option is not specified, the Cosminexus environment will not be restored if there are files remaining in the Cosminexus installation directory.
The -f option is ignored if it is specified with any option other than the -r option.
- Description
-
This message describes the usage method of the cosmienv command.
-
KEUC00005-E (C)
To save, restore, or delete the Cosminexus system environment, use the cosmienv command.
- Description
-
The operation for storing, restoring, or deleting the Cosminexus system environment is invalid.
- Action
-
Use the cosmienv command to store, restore, and delete the Cosminexus system environment.
-
KEUC00006-E (C)
Command usage: cosmienv <options> [-I<identifier>] [-P<save-path>] [-f]
- Description
-
The usage method of the cosmienv command is invalid.
- Action
-
Make sure that the specification method for arguments of the cosmienv command is not invalid.
If the specification method of arguments is not invalid, execute echo $?, acquire the return codes of the cosmienv command, and take action for the return codes.
For details about return codes of the cosmienv command, see KEUC00003-E (C).