5.2 Messages from KDCCC0001 to KDCCC9999 : Messages

KDCCC0001-I

The command finished normally.

Description: The command terminated normally.
Action: Not required.

KDCCC0011-E

A library required for command execution was not found. (details = detailed-information)

Description: The library required for command execution is either not found or is incompatible.
Action: See the description about the development support commands in the manual uCosminexus Application Server SOAP Application Development Guide.

KDCCC0012-E

A command could not be executed. (details = detailed-information)

Description

The command could not be executed because of detailed-information.

Action

Remove the cause of the error, and then re-execute the command.

If the WSDL2Java command is executed, specify the -C option, and then re-execute the command.

KDCCC0013-E

An attempt to analyze the WSDL definition has failed. (details = detailed-information)

Description

The WSDL analysis could not be executed because of detailed-information.

Action

Remove the cause of the error, and then re-execute the command.

If the WSDL2Java command is executed, specify the -C option, and then re-execute the command.

KDCCC0014-E

An attempt to copy files failed.

Description: An attempt to copy the file has failed.
Action: Revise the directory permissions, and then re-execute the command.

KDCCC0101-E

The specified class class-name cannot be converted to an xml schema data type. The type anyType will be used. (details = bean)

Description

The class-name class is not a bean class and cannot be converted to an XML schema data type.

Define the class as the anyType type of XML schema based on the WSDL definition.

Action

Either make the changes such that the class-name class is not used as an argument of the target class or do not generate a WSDL for the methods containing the class-name class.

KDCCC0102-E

The specified class class-name cannot be converted to an xml schema data type. The type anyType will be used. (details = package)

Description: The class-name class is defined as the java or javax package, and cannot be converted to an XML schema data type.
Action: Either make the changes such that the class-name class is not used as an argument of the target class or do not generate a WSDL for the methods containing the class-name class.

KDCCC0103-E

The specified class class-name cannot be converted to an xml schema data type. The type anyType will be used. (details = holders)

Description: The class-name class is defined as the org.apache.axis.holders package, and cannot be converted to an XML schema data type.
Action: Either make the changes such that the class-name class is not used as an argument of the target class or do not generate a WSDL for the methods containing the class-name class.

KDCCC0111-E

A WSDL2Java command timed out.

Description: The WSDL generation processing has timed out.
Action: Reset the timeout to a bigger value in the -O option.

KDCCC0121-E

The wsdl file has already been specified as, WSDL-file-name1. It cannot be specified again as WSDL-file-name2.

Description: The WSDL file is specified as WSDL-file-name-1. You cannot specify the WSDL file as WSDL-file-name2.
Action: Revise the specification, and then re-execute the command.

KDCCC0122-E

The wsdl file was not specified.

Description: The WSDL file is not specified.
Action: Specify the WSDL file.

KDCCC0123-E

An option specification is incorrect. (details = detailed-information)

Description: A mistake described in detailed-information exists in the specification method of the option.
Action: Correct the mistake, and then re-execute the command.

KDCCC0131-E

A binding element was not found. (binding = binding-name)

Description: binding (binding-name) does not exist in the WSDL definition. Revise the value specified in port- binding=".." of the WSDL definition.
Action: Revise the WSDL definition, and then re-execute the command after correction.

KDCCC0132-E

A binding element was not found in the WSDL document WSDL-file-name. (binding = binding-name)

Description: binding (binding-name) does not exist in the WSDL definition WSDL-file-name. Revise the value specified in port-binding=".." of the WSDL definition.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0133-E

A portType element was not found. (portType = port-type-name)

Description: portType (portType-name) does not exist in the WSDL definition. Revise the value specified in binding-type=".." of the WSDL definition.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0134-E

A portType element was not found in the WSDL document WSDL-file-name. (portType = portType-name)

Description: portType (portType-name) does not exist in the WSDL definition (WSDL-file-name). Revise the value specified in binding-type=".." of the WSDL definition.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0135-E

The specified XML schema type data-type is not valid in XML schema version schema-version.

Description: The specified XML Schema type data-type is not valid in the Schema version "<Schema version>".
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0136-E

A specified XML schema type is not currently supported. (XML schema type = data-type)

Description: The specified XML Schema type data-type is not currently supported.
Action: Revise the WSDL definition, and then re-execute the command after correction.

KDCCC0137-E

A specified type is referenced but not defined. (type = data-type)

Description: The specified Type data-type is not defined.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0138-E

The specification of a type or ref attribute is incorrect. (element = element-name)

Description: The type attribute or ref attribute of element-name is incorrect.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0139-E

The specification of a parameterOrder attribute is incorrect. (element = element-name)

Description: Not all the part elements for sending are defined in the parameterOrder attribute of element-name.
Action: Define all the part element names for sending when specifying the parameterOrder attribute.

KDCCC0140-E

The specification of the part element used for input or output is incorrect. (element = element-name)

Description: element-name is not defined in the part attribute for sending or receiving.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0141-E

The part element lacks the element attribute or type attribute. (operation or fault element = element-name, part element = part-element-name)

Description: The element or type attribute is not specified in the Message part element part-element-name of the operation or fault element element-name.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0142-E

The binding operation element has no corresponding portType operation element. (binding operation name = element-name, input name = input-element-name, output name = output-element-name)

Description: The binding operation element does not correspond with the portType operation element.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0143-E

The name attribute of the fault element is incorrect. (binding = binding-element-name, operation = operation-element-name)

Description: The name attribute of the Fault element is incorrect.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0144-E

The soap:fault element is incorrect. (binding = binding-element-name, operation = operation-element-name, fault = fault-element-name)

Description: The soap:fault element of binding binding-element-name, operation operation-element-name, and Fault Fault-element-name is incorrect.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0145-E

The binding fault element does not match the portType fault element. (binding = binding-element-name, operation = operation-element-name, fault = fault-element-name)

Description: The description of binding fault fault-element-name and portType fault does not match in binding binding-element-name and operation operation-element-name.
Action: Revise the relationship between binding fault and portType fault, and then re-execute the command after correcting the WSDL definition.

KDCCC0146-E

The operation element requires the use attribute. (binding operation = operation-element-name)

Description: The use attribute is not specified in the binding operation operation-element-name.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0147-E

The specification of the service element's name attribute is incorrect.

Description: The name attribute of the service element is either not specified or is incorrect.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0148-E

The name attribute is not specified in the port element.

Description: The name attribute is not specified in the port element.
Action: Define the name attribute in the port element, and then re-execute the commands.

KDCCC0149-E

The binding attribute is not specified in the port element.

Description: The binding attribute is not specified in the port element.
Action: Define the binding attribute in the port element, and then re-execute the command.

KDCCC0150-E

The message attribute is not specified in a child element of the portType element.

Description: The value of the message attribute is not specified in any one of input, output, or fault of the portType element.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0151-E

The message attribute specified in a child element of the portType element is incorrect. (message = value-specified-for-message-attribute)

Description: The value specified for the message element value-specified-for-message-element in any one of <input>, <output>, or <fault> of the portType element is invalid.
Action: Revise the WSDL definition, and then re-execute the command after corrections.

KDCCC0161-E

The file cannot be opened. (file = file-name)

Description

The mapping file file-name of the name space and package name cannot be opened.

Action

Check whether the file exists.

If the file exists, check the access permission.

KDCCC0171-W

A file already exists. WSDL2Java cannot overwrite it. (file = file-name)

Description: The file-name file already exists. The file-name file is not overwritten.
Action: Revise the output destination, and re-execute the command as and when required.

KDCCC0172-E

A file already exists. (file = file-name)

Description: An error occurred when checking the existence of the file-name file. The file has not been created.
Action: If the file exists, revise the access permission of the file, and then re-execute the command.

KDCCC0181-E

The location attribute is not specified in the address element. (service = service-element-name, port = port-element-name)

Description: The location attribute does not exist in the address element of the service element service-element-name, and the port element port-element-name in the WSDL definition.
Action: Revise the specified value, and then re-execute the command.

KDCCC0182-E

The address element's location attribute is invalid. (service = service-element-name, port = port-element-name, location attribute value = location-attribute-value)

Description: The location attribute value location-attribute-value of the address element in the service element service-element-name, and the port element port-element-name of the WSDL definition are incorrect.
Action: Revise the specified value, and then re-execute the command.

KDCCC0191-E

A file name is duplicated. (file = file-name)

Description

The file-name to be generated is duplicated. There are elements with same package names for namespace.

Action

Revise the WSDL definition, and then re-execute the command.

If you change the package name, make sure to revise the contents also.

KDCCC0201-E

The class has already been specified as class-name1. It cannot be specified again as class-name2.

Description: The class name is specified as class-name1. You cannot specify the class name as class-name2.
Action: Revise the specification, and then re-execute the command.

KDCCC0202-W

An option specification is incorrect. (option = -w, value = option-value)

Description

A value other than All, Interface, or Implementation is specified in the -w option.

All will be assumed.

Action

To specify a value other than All, revise the option value, and then re-execute the command.

KDCCC0203-E

An option specification is incorrect. (option = -T)

Description: A value other than 1.1 or 1.2 is specified in the -T option.
Action: Revise the option value, and then re-execute the command.

KDCCC0204-E

An option specification is incorrect. (option = -A)

Description: A value other than DEFAULT, NONE, or OPERATION is specified in the -A option.
Action: Revise the option value, and then re-execute the command.

KDCCC0205-E

An option specification is incorrect. (option = -u)

Description: A value other than LITERAL or ENCODED is specified in the -u option.
Action: Revise the option value, and then re-execute the command.

KDCCC0206-E

The class name is not specified.

Description: The class name is not specified.
Action: Specify the class name, and then re-execute the command.

KDCCC0207-E

An option is not specified. (option = -l)

Description: If All or Implementation is specified in the -w option, you must specify the -l option.
Action: Specify -l option, and then re-execute the process.

KDCCC0208-E

A specified class was not found. (class = class-name)

Description: The specified class does not exist.
Action: Revise the class name, and then re-execute the command.

KDCCC0211-W

An option specification is incorrect. The specified value will be ignored. (option = -d, value = option-value)

Description

The -d option is specified incorrectly.

Action

Revise the option value, and then re-execute the command.

The source is generated by assuming Request.

KDCCC0221-W

An option specification is incorrect. The system assumes an RPC was specified. (option = -p, value = option-value)

Description: A value other than RPC, EJB, or C4MSG is specified in the -p option.
Action: Revise the option value, and then re-execute the command.

KDCCC0222-I

An option is not specified. The system assumes an RPC was specified. (option = -p)

Description

The -p option is not specified.

RPC will be assumed.

Action

If you want to use a value other than RPC for creation, revise the option value, and then re-execute the command.

KDCCC0223-E

The option option-name1 cannot be specified when the specified value of option-name2 is option-value.

Description: The option-name1 option cannot be specified when the value of option-name2 is option-value.
Action: Revise the option value, and then re-execute the command.

KDCCC0224-E

A required option is not specified. (option = option-name)

Description: The mandatory option-name option is not specified.
Action: Revise the option value, and then re-execute the command.

KDCCC0225-E

The onMessage method is not defined in the specified class.

Description: The onMessage method does not exist in the specified class, and therefore, the -p option cannot be used if the value is C4MSG.
Action: Revise the option value, and then re-execute the command.

KDCCC0226-E

The specified class is not an EJB remote interface or EJB local interface.

Description: If EJB is specified in the -p option, specify the remote or local interface class of the EJB.
Action: Revise the option value, and then re-execute the command.

KDCCC0227-E

The value of the specified option is incorrect. (option = -z)

Description: A value other than RPC or DOCUMENT is specified in the -z option.
Action: Revise the option value, and then re-execute the command.

KDCCC0228-W

method-name method defined in the specified class was assumed to throw java.rmi.RemoteException. An implementation class of java.rmi.Remote including javax.ejb.EJBObject must throw it.

Description: The java.rmi.RemoteException exception does not exist in the throws clause of the method-name method defined in the specified class. An implementation class of java.rmi.Remote (including javax.ejb.EJBObject), or a method of the inherited interface must throw the java.rmi.RemoteException exception.
Action: Add the java.rmi.RemoteException exception to the throws clause of the method-name method.

KDCCC0229-W

exception-class-name exception of method-name method defined in the specified class was ignored.

Description: The exception-class-name exception included in the throws clause of the method-name method defined in the specified class was not processed. If this command terminates normally, the information related to the exception-class-name exception will not be included in the generated WSDL or the service deployment definition.
Action: Delete the exception-class-name exception from the throws clause of the method-name method.

KDCCC0230-W

java.rmi.RemoteException of method-name method defined in the specified class was ignored. An implementation class of javax.ejb.EJBLocalObject must not throw it.

Description: The java.rmi.RemoteException exception exists in the throws clause of the method-name method defined in the specified class. An implementation class of javax.ejb.EJBLocalObject or a method of the inherited interface must not throw the java.rmi.RemoteException exception.
Action: Delete the java.rmi.RemoteException exception from the throws clause of the method-name method.

KDCCC0231-E

Cannot generate exception class from complexType or element tag-name. Name "exception-class-name" is reserved.

Description: An exception class cannot be generated from the complex type or element tag-name. The name exception-class-name is reserved.
Action: Either revise the name space URI of tag-name or change the package name specified in the -N, -f, or -p option, and then re-execute the command.

KDCCC0232-E

The value option-value1 of the option option-name1 and the value option-value2 of the option option-name2 are exclusive.

Description: If option-value1 is specified as the value of option-name1, you cannot specify option-value2 as the value of option-name2.
Action: Revise the option value, and then re-execute the command.

KDCCC0233-I

The validation of the WSDL document was started. (WSDL document = option-value1)

Description: The validation of WSDL is started.
Action: Not required.

KDCCC0234-E

The WSDL document is invalid. The document has unsupported WSDL elements or attributes.

Description: Unsupported WSDL elements or attributes are used in the WSDL definition.
Action: Delete the unsupported WSDL elements or attributes from the WSDL definition.

KDCCC0235-E

The WSDL document is invalid. The document has unsupported MIME binding elements or attributes.

Description: Unsupported MIME binding elements or attributes are used in the WSDL definition.
Action: Delete the unsupported MIME binding elements or attributes from the WSDL definition.

KDCCC0236-E

The WSDL document is invalid. The document has unsupported XML Schema elements or attributes.

Description: Unsupported WSDL elements or attributes are used in the WSDL definition.
Action: Delete the unsupported XML Schema elements or attributes from the WSDL definition.

KDCCC0237-I

The validation of the WSDL document was finished successfully.

Description: The validation processing of the WSDL definition is completed successfully.
Action: Not required.

KDCCC0238-E

The type referenced by part-element-name of message-element-name is simple type or array.

Description: The type referenced by part-element-name of message-element-name is either a simple type or an array.
Action: Make the changes so as to reference a complex type, and then re-execute the command.

KDCCC0239-E

Multiple part elements or no part elements were found in message-element-name.

Description: Either 0, or multiple part elements are specified in message-element-name. Only one part element can be included in message-element-name.
Action: Correct the WSDL, and then re-execute the command.

KDCCC0240-E

The type attribute of the part element is specified when the style is document. (message = message-element-name, part = part-element-name)

Description: The type attribute is specified in the part element of the document or literal WSDL.
Action: Specify the element attribute in the part element of the document or literal WSDL.

KDCCC0245-E

An option specification is incorrect. (option = -C, --check).

Description: An invalid string is passed to the argument of the WSDL validation option of the WSDL2Java command.
Action: Revise the argument of the WSDL validation option, and then re-execute the command.

KDCCC0247-E

Cannot specify multiple "element1" elements in a single "element2" element.

Description: Multiple element1 elements are defined as the child elements of the element2 element. More than one element1 element cannot be specified in the element2 element.
Action: Revise the WSDL definition, and then re-execute the command.

KDCCC0263-E

Multiple part elements are defined in the message element when the style is document. (message = message-element-name)

Description: Multiple part elements are defined for one message element in the document or literal WSDL.
Action: Specify one or lesser part elements for one message element.

KDCCC0265-E

The specified URL is invalid. (option = -l/--location, specified url = specified-URL)

Description: An invalid URL is specified in the -l or --location option.
Action: Revise the URL, and specify a correct URL.

KDCCC0266-E

The style of all the operations in the wsdl:binding element is not the same. (binding = binding-element-name)

Description: Operations with different styles cannot be defined in the binding element.
Action: Specify the same style for all the operations in the binding element.

KDCCC0269-E

The overloaded method is not supported when the document style is specified. (method = method-name)

Description: If DOCUMENT is specified in the -z option, the interface containing the overloaded method cannot be specified.
Action: Change the method name.

KDCCC0271-E

The specified URL contains invalid character(s). (option = -l/--location, specified url = specified-URL)

Description

An invalid URL is specified in -l option.

Action

Unsupported characters have been used in the URL. Revise the URL, and specify a correct URL.

For a URL exceeding 128 bytes, only up to 128 bytes will be displayed in specified-URL. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0272-E

The specified URL is too long. (option = -l/--location, specified url = specified-URL)

Description

An invalid URL is specified in -l option.

Action

The URL length exceeds 8,190 bytes. Revise the URL, and specify a correct URL.

Up to 128 bytes will be displayed in specified-URL. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0273-E

The value of the address element's location attribute contains invalid character(s). (service = service-element-name, port = port-element-name, location attribute value = location-attribute-value)

Description

The location attribute value location-attribute-value of the address element in the service element service-element-name, and the port element port-element-name of the WSDL definition are incorrect.

Action

Unsupported characters are used in the value of the location attribute. Revise the value of the location attribute, and then re-execute the command.

If the value of the location attribute exceeds 128 bytes, only up to 128 bytes will be displayed in location-attribute-value. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0274-E

The value of the address element's location attribute is too long. (service = service-element-name, port = port-element-name, location attribute value = location-attribute-value)

Description

The location attribute value location-attribute-value of the address element in the service element service-element-name, and the port element port-element-name of the WSDL definition are incorrect.

Action

The string length of the location attribute value exceeds 8,190 bytes. Revise the value of the location attribute, and then re-execute the command.

Up to 128 bytes will be displayed in location-attribute-value. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0275-E

An unsupported XML Schema version is specified. (value = value, file = file-name)

Description: An unsupported version of XML Schema is used. (value = value, file = file-name).
Action: Revise the WSDL definition, and use http://www.w3.org/2001/XMLSchema.

KDCCC0276-W

The filename specified in the attribute-name attribute of element-name element is not a relative URI. The specified file is skipped. (attribute-name = value, file = file-name)

Description

The file specified in the attribute-name attribute of the element-name element is not a relative URI. The specified file is skipped (attribute-name = value, file = file-name).

The specification of a file name using various protocols, such as file, http, and ftp is not supported.

Action

Revise the WSDL definition, and describe the file path with a relative URI.

KDCCC0277-E

The file path specified by attribute-name attribute of element-name element is too long. Please specify it within 256 characters. (attribute-name = value, file = file-name)

Description: The file path specified in the attribute-name attribute of the element-name element is too long. Specify the file path within 256 characters (attribute-name = value, file = file-name).
Action: Revise the WSDL definition and make sure that after converting to absolute path, the number of characters is within 256 characters.

KDCCC0278-E

The XML Schema file specified in the schemaLocation attribute of import element is already imported. (namespace = namespace, schemaLocation= value, file = file-name)

Description

The XML Schema file specified in the schemaLocation attribute of the import element is already imported. (namespace = namespace, schemaLocation = value, file = file-name).

The same XML Schema file cannot be imported twice.

Action

Revise the XML Schema definition.

KDCCC0279-E

The namespace of "target-file-name" file specified in the element-name element does not match to that specified in the attribute-name attribute. (attribute-name = namespace, file = file-name)

Description: The namespace of the target-file-name file specified in the element-name element does not match the namespace specified in the attribute-name attribute (attribute-name = namespace, file = file-name).
Action: Revise the WSDL definition, and specify the same namespace.

KDCCC0280-E

A XML Schema definition has to be imported to refer the element or attribute of other namespaces. (namespace = value, file = file-name)

Description: The XML Schema definition must be imported to reference the elements and attributes of other namespace (namespace = value, file = file-name).
Action: Import the XML Schema definition with the xsd:import element.

KDCCC0281-E

The namespace "http://www.w3.org/2001/XMLSchema" cannot be imported. (file = file-name)

Description: Cannot import the namespace http://www.w3.org/2001/XMLSchema (file = file-name).
Action: Delete the import element in which http://www.w3.org/2001/XMLSchema is described.

KDCCC0282-W

A schemaLocation attribute of import element cannot be specified. (namespace = value, file = file-name)

Description: The schemaLocation attribute of the import element is not required (namespace = value, file = file-name).
Action: Delete the schemaLocation attribute of the import element.

KDCCC0283-E

A types element must be specified before all other elements (except documentation and import element) in a WSDL definition. (file = file-name)

Description: The types element must be defined before all other elements, except the documentation element and import element, in the WSDL definition (file = file-name).
Action: Revise the WSDL definition, and describe at the correct location.

KDCCC0284-E

A WSDL file structure specified in the import element of WSDL definition is invalid or the WSDL definition specified import element is invalid. (location = value, file = file-name, details = detailed-information)

Description: The WSDL file structure specified in the import element of the WSDL definition is invalid, or the WSDL definition describing the import element is incorrect (location = value, file = file-name, details = detailed-information).
Action: Revise the structure of the WSDL file. For details about the combination of each element of the WSDL definition, see the description about the combination of elements when the WSDL is imported in the manual uCosminexus Application Server SOAP Application Development Guide.

KDCCC0285-E

An import element must be specified before all other elements (except documentation element) in a WSDL definition. (file = file-name)

Description: The import element must be defined before all other elements, except the documentation element, in the WSDL definition (file = file-name).
Action: Revise the WSDL definition, and describe at the correct location.

KDCCC0286-E

A namespace attribute of import element does not exist in the XML Schema definition. (file = file-name)

Description: The namespace attribute of the import element does not exist in the XML Schema definition (file = file-name).
Action: Revise the XML Schema definition.

KDCCC0287-E

The XML shema file specified in the schemaLocation attribute of include element is already included. (targetNamespace = namespace, schemaLocation = value, file = file-name)

Description

The XML Schema file specified in the schemaLocation attribute of the include element has been already included (targetNamespace = namespace, schemaLocation = value, file = file-name).

The same XML Schema file cannot be included twice.

Action

Revise the XML Schema definition.

KDCCC0288-E

The WSDL file specified in the location attribute of import element is already imported. (namespace = namespace, location = value, file = file-name)

Description

The WSDL file specified in the location attribute of the import element has been already imported (namespace = namespace, location = value, file = file-name).

The same WSDL file cannot be imported twice.

Action

Revise the WSDL definition.

KDCCC0289-W

The namespace "namespace" has to be imported. (file = file-name)

Description: The namespace namespace must be imported (file = file-name).
Action: Import namespace.

KDCCC0290-E

The target namespace is not specified for targetNamespace attribute. (file = file-name)

Description

The namespace is not specified in the targetNamespace attribute (file = file-name). This message is output in the following cases:

When the value of the import source targetNamespace attribute or the import target targetNamespace attribute is omitted
When the combination of the values of the import source targetNamespace attribute and the import target targetNamespace attribute is a blank character

Action

Specify the target name space.

KDCCC0291-E

The percent-encoded valuefile has to be specified instead of the "value" which used in attribute-name attribute of element-name element. (percent-encoded value = percent-encoded-value, file = file-name)

Description

Specify a percent-encoded value for the value to be specified in the attribute-name attribute of the element-name element (percent-encoded value = percent-encoded-value, file = file-name).

Action

If a character string containing other than the reserved characters and unreserved characters stipulated in RFC3986 is used, the percent encoding must be performed in UTF-8.

Use the percent-encoded file name output in the message.

KDCCC0292-E

The percent-encoded value of the port element's name attribute is not equal the value of the end part of the URL path component. (service = service-element-name, port = port-element-name, name attribute value (percent-encoded) = percent-encoded-name-attribute-value, the end part of the URL path component = end-part-of-URL-path)

Description

After performing percent encoding for the value specified in the name attribute in the port element port-element-name of the service element service-element-name in the WSDL definition, percent-encoded-name-attribute-value and the end part of the URL path component end-part-of-URL-path specified in the location attribute of the address element do not match.

Action

Specify the value displayed in percent-encoded-name-attribute-value in the end part of the location attribute of the URLaddress element. However, if the length of the string exceeds 128 bytes, only the first 128 bytes will be displayed. In such a case, perform percent encoding for the value of the name attribute of port element in the encryption-format UTF-8 encoding, and specify the result in the end part of the location attribute of the address element.

If the length of the strings specified in service-element-name, port-element-name, percent-encoded-name-attribute-value, and end-part-of-URL-path exceeds 128 bytes, the end part will be truncated, and only the first 128 bytes will be displayed. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0293-E

The value of the port element's name attribute is not equal the value of the end part of the URL path component. (service = service-element-name, port = port-element-name, the end part of the URL path component = end-part-of-URL-path)

Description

The value specified in the name attribute in the port element port-element-name of the service element service-element-name in the WSDL definition does not match the end part of the URL path component end-part-of-URL-path specified in the location attribute of the address element.

Action

Check the value of the name attribute of the port element and the location attribute of the address element, and specify the correct value.

If the length of the strings specified in service-element-name, port-element-name, and end-part-of-URL-path exceeds 128 bytes, the end part will be truncated, and only the first 128 bytes will be displayed. If the characters are not delimited at the 128^th byte, the character displayed in the 128^th byte will be different from the specified character.

KDCCC0295-I

The validation of the XML Schema document was started. (XML Schema document = file-name)

Description: The processing of the WSDL validation function has started (XML Schema document = file-name).
Action: Not required.

KDCCC0296-I

The validation of the XML Schema document was finished successfully.

Description: The processing of the WSDL validation function is completed successfully.
Action: Not required.

KDCCC0297-E

The command cannot be executed because you do not have administrator privileges.

Description: The command cannot be executed because you do not have administrator privileges.
Action: Re-execute the command on a command prompt, as an administrator.

KDCCC0298-E

An error occurred while the permissions were being checked.

Description: An error occurred while the permissions were being checked.
Action: The memory may be insufficient. Increase the free memory, and then re-execute the command. If the problem is still not resolved, contact the system administrator.

KDCCC0299-E

The XML Schema document is invalid. The document has unsupported XML Schema elements or attributes.

Description: Unsupported XML Schema elements or attributes are used in the XML Schema definition.
Action: Delete the unsupported XML Schema elements or attributes from the XML Schema definition.

KDCCC0300-E

The targetNamespace attribute of the importing schema must be different from the targetNamespace attribute of the schema which contains import. (targetNamespace = value, file = file-name)

Description: The value of the import target targetNamespace attribute must be different from the value of the import source targetNamespace attribute (targetNamespace = value, file = file-name).
Action: Revise the targetNamespace attribute.

KDCCC0301-W

The definition of the type QName-definition-type is duplicate.

Description: The definition of QName-definition-type is duplicate in the WSDL.
Action: Revise the WSDL, and if necessary, re-execute the command.

KDCCC0302-E

Element element-name is referenced but not defined.

Description: The element-name element is referenced, but is not defined.
Action: Revise the WSDL definition or XML Schema definition.

KDCCC0303-E

There is a wrong description in the WSDL definition. (file = file-name)

Description: The WSDL definition contains a wrong description (file = file-name).
Action: Delete the wrong description from the WSDL definition.

KDCCC0304-E

The file path of specified WSDL is invalid. (file = file-name)

Description: The file path of the specified WSDL is invalid (file = file-name).
Action: Make sure that no invalid characters are included in the file path of the specified WSDL.

KDCCC0305-E

The value of -z/--style option for Java2WSDL or Java2WSDD command is incorrect when using attachments. (-z = specified-value-for-option--z)

Description: The specification of the -z option of the Java2WSDL command or Java2WSDD command is invalid when attached files are used (-z = specified-value-for-option--z).
Action: Revise the options specified during the execution of the Java2WSDL command or the Java2WSDD command.

KDCCC0306-E

Attachments cannot be used when the style is rpc.

Description: If the style attribute of the soap:binding element in the WSDL definition is rpc, the attached file cannot be used.
Action: Revise the WSDL definition that is the input of the WSDL2Java command.

KDCCC0308-E

Attachments cannot be used in the xsd:attribute element in the WSDL definition. (attribute name = specified-attribute-value)

Description: The attached file cannot be used in the xsd:attribute element of the WSDL definition (attribute name = specified-attribute-name).
Action: Revise the WSDL definition that is the input of the WSDL2Java command.

KDCCC0309-E

Attachments cannot be used in the user definition exception.

Description: The attached file cannot be used in a user-defined exception.
Action: Revise the user-defined exception, and the contents of the Java class referenced from the user-defined exception.

KDCCC0310-E

Attachments cannot be specified as the type referenced by wsdl:fault element. (fault name = specified-fault-name)

Description: The attached file cannot be used in the element type referenced from the wsdl:fault element (fault name = specified-fault-name).
Action: Revise the WSDL definition that is the input of the WSDL2Java command.