4.11.6 Parameters used for setting up the user properties for the batch server
This section describes the parameters used for setting up the user properties for the batch server.
For details about the contents to be specified in param-value corresponding to 'Value of param-name', see 3.2.2 usrconf.properties (User property file for batch servers). When you reference the section, read the key as parameter. In the table below, Default value means the value that is assumed when the parameter is not specified.
The following describes the specification format.
- Specification format
<param-name>parameter</param-name> <param-value>value</param-value>
Among the parameters that can be specified in usrconf.properties (the user property file for the batch server), specify any parameters that do not appear either in the table in 4.11.8 Parameters applicable to the JavaVM system properties for the batch server or in the table in this section by using the following format.
- Specification format
<param-name>ex.properties</param-name> <param-value>parameter=value</param-value>
To specify multiple values, specify multiple <param-value> elements.
- Specification format when multiple values are specified
<param-name>ex.properties</param-name> <param-value>parameter=value</param-value> <param-value>parameter=value</param-value>
- Organization of this subsection
-
(1) Parameters beginning with ejbserver.application
The following table describes the parameters beginning with ejbserver.application.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.application.InitTermProcessClasses#1 |
None |
|
ejbserver.application.userlog.CJLogHandler.handler-name.appname |
user_app |
|
ejbserver.application.userlog.CJLogHandler.handler-name.count |
2 |
|
ejbserver.application.userlog.CJLogHandler.handler-name.encoding |
None |
|
ejbserver.application.userlog.CJLogHandler.handler-name.filter |
None |
|
ejbserver.application.userlog.CJLogHandler.handler-name.formatter |
None |
|
ejbserver.application.userlog.CJLogHandler.handler-name.level |
SEVERE |
|
ejbserver.application.userlog.CJLogHandler.handler-name.limit |
1048576 |
|
ejbserver.application.userlog.CJLogHandler.handler-name.msgid |
0001 |
|
ejbserver.application.userlog.CJLogHandler.handler-name.path |
user_log |
|
ejbserver.application.userlog.CJLogHandler.handler-name.separator |
| |
|
ejbserver.application.userlog.Logger.logger-name.filter |
None |
|
ejbserver.application.userlog.Logger.logger-name.handlers#1 |
None |
|
ejbserver.application.userlog.Logger.logger-name.level |
SEVERE |
|
ejbserver.application.userlog.Logger.logger-name.useParentHandlers |
true |
|
ejbserver.application.userlog.loggers#1 |
None |
|
ejbserver.application.userlog.menu.handlers.#1#2 |
None |
- #1
-
To specify multiple values in param-value, delimit the values with commas (,).
(Example)
<param-value>value1, value2, value3</param-value>
- #2
-
The list of handler names is specified in this parameter.
When you delete the handler name from this parameter, also delete the related parameter (ejbserver.application.userlog.CJLogHandler.handler-name-to-be-deleted.XXX).
Note that the key corresponding to this parameter in not included in 3.3 usrconf.properties (User property file for batch servers).
(2) Parameters beginning with ejbserver.batch
The following table describes the parameters beginning with ejbserver.batch:
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.batch.application.exit.enabled |
true |
|
ejbserver.batch.gc.watch.threshold |
0 |
|
ejbserver.batch.queue.length |
50 |
|
ejbserver.batch.schedule.group.name |
JOBGROUP |
(3) Parameters beginning with ejbserver.client
The following table describes the parameters beginning with ejbserver.client.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.client.ctm.RequestPriority |
4 |
(4) Parameters beginning with ejbserver.connectionpool
The following table describes the parameters beginning with ejbserver.connectionpool.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.connectionpool.association.enabled |
false |
|
ejbserver.connectionpool.validation.timeout |
5 |
(5) Parameters beginning with ejbserver.connector
The following table describes the parameters beginning with ejbserver.connector.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.connector.logwriter.filenum |
4 |
|
ejbserver.connector.logwriter.filesize |
2097152 |
(6) Parameters beginning with ejbserver.container
The following table describes the parameters beginning with ejbserver.connector.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.container.audit_trail.enabled |
false |
(7) Parameters beginning with ejbserver.deploy
The following table describes the parameters beginning with ejbserver.deploy.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.deploy.resourcefile.scramble.enabled |
false |
(8) Parameters beginning with ejbserver.ext
The following table describes the parameters beginning with ejbserver.ext.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.ext.method_observation.interval |
0 |
(9) Parameters beginning with ejbserver.http
The following table describes the parameters beginning with ejbserver.http.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.http.port |
28080 |
(10) Parameters beginning with ejbserver.instrumentation
The following table describes the parameters beginning with ejbserver.instrumentation.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.instrumentation.enabled |
true |
(11) Parameters beginning with ejbserver.jndi
The following table describes the parameters beginning with ejbserver.jndi.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.jndi.cache |
on |
|
ejbserver.jndi.cache.interval |
0 |
|
ejbserver.jndi.cache.interval.clear.option |
refresh |
|
ejbserver.jndi.namingservice.group.specify-group-name.providerurls |
None |
|
ejbserver.jndi.namingservice.group.list |
None |
|
ejbserver.jndi.request.timeout |
0 |
(12) Parameters beginning with ejbserver.jta
The following table describes the parameters beginning with ejbserver.jta.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.jta.TransactionManager.defaultTimeOut |
180 |
(13) Parameters beginning with ejbserver.logger
The following table describes the parameters beginning with ejbserver.logger.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.ConnectionPoolWatchLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.ConsoleLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.ConsoleLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.EJBContainerLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.EJBContainerLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.ExceptionLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.ExceptionLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.FileDescriptorWatchLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.MaintenanceLogFile.filenum |
4 |
|
ejbserver.logger.channels.define.MaintenanceLogFile.filesize |
16777216 |
|
ejbserver.logger.channels.define.MemoryWatchLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.MemoryWatchLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.MessageLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.MessageLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.ThreaddumpWatchLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.ThreadWatchLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.ThreadWatchLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.UserErrLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.UserErrLogFile.filesize |
1048576 |
|
ejbserver.logger.channels.define.UserOutLogFile.filenum |
2 |
|
ejbserver.logger.channels.define.UserOutLogFile.filesize |
1048576 |
|
ejbserver.logger.enabled.* |
Error, Warning |
(14) Parameters beginning with ejbserver.management
The following table describes the parameters beginning with ejbserver.management.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.management.JVM.stats_monitor.FullGCCount.enabled |
true |
|
ejbserver.management.JVM.stats_monitor.FullGCCount.interval |
600 |
|
ejbserver.management.JVM.stats_monitor.FullGCCount.threshold |
10 |
|
ejbserver.management.statistics.interval |
60 |
|
ejbserver.management.stats_file.base_time |
0 |
|
ejbserver.management.stats_file.dir |
(In Windows) Cosminexus-working-directory\ejb\server-name\stats (In UNIX) Cosminexus-working-directory/ejb/server-name/stats |
|
ejbserver.management.stats_file.enabled |
true |
|
ejbserver.management.stats_file.num |
7 |
|
ejbserver.management.stats_file.period |
24 |
(15) Parameters beginning with ejbserver.manager
The following table describes the parameters beginning with ejbserver.manager.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.manager.agent.JP1EventAgent.conf |
None |
|
ejbserver.manager.agent.JP1EventAgent.enabled |
false |
|
ejbserver.manager.agent.MEventAgent.conf |
None |
|
ejbserver.manager.agent.MEventAgent.enabled |
true |
(16) Parameters beginning with ejbserver.naming
The following table describes the parameters beginning with ejbserver.naming.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.naming.host |
Same host as the batch server |
|
ejbserver.naming.port |
900 |
|
ejbserver.naming.startupRetryCount |
9 |
|
ejbserver.naming.startupWaitTime |
1 |
(17) Parameters beginning with ejbserver.rmi
The following table describes the parameters beginning with ejbserver.rmi.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.rmi.naming.host |
None |
|
ejbserver.rmi.naming.port |
23152 |
|
ejbserver.rmi.remote.listener.port |
0 |
|
ejbserver.rmi.request.timeout |
0 |
(18) Parameters beginning with ejbserver.server
The following table describes the parameters beginning with ejbserver.server.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.server.prf.PRFID |
None |
|
ejbserver.server.threaddump.filenum |
256 |
(19) Parameters beginning with ejbserver.stdoutlog
The following table describes the parameters beginning with ejbserver.stdoutlog.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.stdoutlog.autoflush |
false |
(20) Parameters beginning with ejbserver.watch
The following table describes the parameters beginning with ejbserver.watch.
|
Value of param-name |
Default value |
|---|---|
|
ejbserver.watch.enabled |
true |
|
ejbserver.watch.fileDescriptor.enabled |
true |
|
ejbserver.watch.fileDescriptor.interval |
60 |
|
ejbserver.watch.fileDescriptor.threshold |
2147483647 |
|
ejbserver.watch.fileDescriptor.writefile.enabled |
true |
|
ejbserver.watch.memory.enabled |
true |
|
ejbserver.watch.memory.interval |
60 |
|
ejbserver.watch.memory.threshold |
80 |
|
ejbserver.watch.memory.writefile.enabled |
true |
|
ejbserver.watch.thread.enabled |
true |
|
ejbserver.watch.thread.interval |
60 |
|
ejbserver.watch.thread.threshold |
2147483647 |
|
ejbserver.watch.thread.writefile.enabled |
true |
|
ejbserver.watch.threaddump.enabled |
true |
|
ejbserver.watch.threaddump.interval |
30 |
|
ejbserver.watch.threaddump.threshold |
80 |
|
ejbserver.watch.threaddump.writefile.enabled |
true |
(21) Parameters beginning with java
The following table describes the parameters beginning with java.
|
Value of param-name |
Default value |
|---|---|
|
java.naming.factory.initial |
com.hitachi.software.ejb.jndi.InsContextFactory |
(22) Parameters beginning with vbroker
The following table describes the parameters beginning with vbroker.
|
Value of param-name |
Default value |
|---|---|
|
vbroker.agent.port |
14000 |
|
vbroker.se.iiop_tp.host |
None |
|
vbroker.se.iiop_tp.scm.iiop_tp.listener.port |
0 |
(23) Parameters beginning with webserver.connector
The following table describes the parameters beginning with webserver.connector.
|
Value of param-name |
Default value |
|---|---|
|
webserver.connector.http.bind_host |
None |
|
webserver.connector.http.permitted.hosts# |
None |
- #
-
To specify multiple values in param-value, delimit the values with commas (,).
(Example)
<param-value>value1, value2, value3</param-value>