4.10.3 Parameters used for setting up the log output method of Cosminexus HTTP Server
This table describes the parameters used for setting up the log output method of Cosminexus HTTP Server. In the table below, Default value means the value that is assumed when the parameter is not specified. VR is the version of Application Server on which parameters are introduced or changed.
Value of param-name |
Value of param-value |
Specifiable value |
Default value |
VR |
---|---|---|---|---|
Enabled when Div is specified in HttpsdCustomMethod. Specifies the number of divided log files. If the number of divided files exceeds the number specified here, the oldest files are deleted. If 0 is specified, the files are not deleted. |
Specify the value using an integer from 0 to 256. |
8 |
07-50 |
|
Enabled when Div is specified in HttpsdCustomMethod. Specifies the standard time for dividing the log files (unit: minutes) in a range from -1439 to 1439 as the difference for GMT. If 0 is specified, January 1, 1970, 0:0:0 (GMT) becomes the standard time. |
Specify the value using an integer from -1439 to 1439. |
540 |
07-50 |
|
Enabled when Div is specified in HttpsdCustomMethod. Specifies the time interval used for one log file in a range from 1 to 31536000. |
Specify the value using an integer from 1 to 31536000. |
86400 |
07-50 |
|
Enabled when Wrap is specified in HttpsdCustomMethod. Specifies the maximum number of log files to be output in a range from 1 to 256. If the size of the log file exceeds the size specified in CustomWraparoundFilesize, log is output to the next log file. In such a case, if the same number of log files as the maximum number specified in this parameter are already created, the files are re-used from the file with the name .001. |
Specify the value using an integer from 1 to 256. |
5 |
07-50 |
|
Enabled when Wrap is specified in HttpsdCustomMethod. Specifies the maximum size of the log file (units: kilobytes) in a range from 1 to 2097151. During log output, if the log file size exceeds the maximum size specified in this parameter, the log is output to the next log file. In such a case, the contents of the log file in which the log is output are cleared. |
Specify the value using an integer from 1 to 2097151. |
8192 |
07-50 |
|
Enabled when Div is specified in HttpsdErrorMethod. Specifies the number of divided log files in a range from 0 to 256. If the number of divided files exceeds the number specified here, the oldest files are deleted. If 0 is specified, the files are not deleted. |
Specify the value using an integer from 0 to 256. |
8 |
07-50 |
|
Enabled when Div is specified in HttpsdErrorMethod. Specifies the standard time for dividing the log files (unit: minutes) in a range from -1439 to 1439 as the difference for GMT. If 0 is specified, January 1, 1970, 0:0:0 (GMT) becomes the standard time. |
Specify the value using an integer from -1439 to 1439. |
540 |
07-50 |
|
Enabled when Div is specified in HttpsdErrorMethod. Specifies the time interval used for one log file in a range from 1 to 31536000. |
Specify the value using an integer from 1 to 31536000. |
86400 |
07-50 |
|
Enabled when Wrap is specified in HttpsdErrorMethod. Specifies the maximum number of log files to be output in a range from 1 to 256. If the size of the log file exceeds the size specified in ErrorWraparoundFilesize, log is output to the next log file. In such a case, if the same number of log files as the maximum number specified in this parameter are already created, the files are re-used from the file with the name .001. |
Specify the value using an integer from 1 to 256. |
5 |
07-50 |
|
Enabled when Wrap is specified in HttpsdErrorMethod. Specifies the maximum size of the log file (units: kilobytes) in a range from 1 to 2097151. During log output, if the log file size exceeds the maximum size specified in this parameter, the log is output to the next log file. In such a case, the contents of the log file in which the log is output are cleared. |
Specify the value using an integer from 1 to 2097151. |
8192 |
07-50 |
|
Specifies the directory to output the access log output by the Web server. |
Specify any string. |
Logs |
07-50 |
|
Specifies the label name provided by Cosminexus HTTP Server or an optional format. The formats corresponding to the label names provided by Cosminexus HTTP Server are as follows:
To specify a format other than the above, specify the optional format. The contents specified in the format are set up in the argument of the CustomLog directive in httpsd.conf (Cosminexus HTTP Server definition file). For details on the contents to be specified in the format, see the description about the CustomLog directive in the manual Cosminexus HTTP Server. When you are using UNIX and the value of the manager.web.send_request_method parameter is reverseproxy, if you directly edit httpsd.conf, do not delete the LogFormat directive that is specified by default. |
Specify any string with a maximum of 1024 characters. |
hws_std |
07-50 |
|
Specifies one of the following as the log output method for access log:
|
The following strings can be specified:
|
Div |
07-50 |
|
Specifies the directory to output the error log output by the Web server. |
Specify any string. |
Logs |
07-50 |
|
Specifies one of the following as the error log output method:
|
The following strings can be specified:
|
Wrap |
07-50 |
|
Specifies the directory to which log information is to be output by the Web server. |
Specify any string. |
Logs |
06-50 07-50 |
|
Specifies the directory to output the request log output by the Web server. |
Specify any string. |
Logs |
07-50 |
|
Specifies one of the following as the request log output method:
|
The following strings can be specified:
|
Div |
07-50 |
|
Enabled when "on" is set up in HWSRequestLogLevel. Specified when the I/O filter trace showing the execution trigger is output for the I/O filter function implemented in the module. The amount of output is large, so specification in real operations is not recommended. Specify one of the following values:
|
The following strings can be specified:
|
false |
07-50 |
|
Specifies whether to output to the request log. Specify one of the following values:
If "on" is set up in this parameter, the following parameter settings are enabled:
By default, the following parameters are output:
|
The following strings can be specified: Note that the value is not case sensitive.
|
On |
07-50 |
|
Enabled when "on" is set up in HWSRequestLogLevel. Specified when the module trace for internal module is output and trace corresponding to external module is output. The amount of output is large, so specification in real operations is not recommended. Specify one of the following values:
|
The following strings can be specified:
|
false |
07-50 |
|
Enabled when "on" is set up in HWSRequestLogLevel. Specified when module trace is output for the external module. Specify one of the following values:
|
The following strings can be specified:
|
true |
07-50 |
|
Enabled when "on" is set up in HWSRequestLogLevel. Specified in the following cases:
Specify one of the following values:
|
The following strings can be specified:
|
true |
07-50 |
|
Enabled when Div is specified in HttpsdRequestMethod. Specifies the number of divided log files in a range from 0 to 256. If the number of divided files exceeds the number specified here, the oldest files are deleted. If 0 is specified, the files are not deleted. |
Specify the value using an integer from 0 to 256. |
8 |
07-50 |
|
Enabled when Div is specified in HttpsdRequestMethod. Specifies the standard time for dividing the log files (unit: minutes) in a range from -1439 to 1439 as the difference for GMT. If 0 is specified, January 1, 1970, 0:0:0 (GMT) becomes the standard time. |
Specify the value using an integer from -1439 to 1439. |
540 |
07-50 |
|
Enabled when Div is specified in HttpsdRequestMethod. Specifies the time interval used for one log file in a range from 1 to 31536000. |
Specify the value using an integer from 1 to 31536000. |
86400 |
07-50 |
|
Enabled when Wrap is specified in HttpsdRequestMethod. Specifies the maximum number of log files to be output in a range from 1 to 256. If the size of the log file exceeds the size specified in RequestWraparoundFilesize, log is output to the next log file. In such a case, if the same number of log files as the maximum number specified in this parameter are already created, the files are re-used from the file with the name .001. |
Specify the value using an integer from 1 to 256. |
5 |
07-50 |
|
Enabled when Wrap is specified in HttpsdRequestMethod. Specifies the maximum size of the log file (units: kilobytes) in a range from 1 to 2097151. During log output, if the log file size exceeds the maximum size specified in this parameter, the log is output to the next log file. In such a case, the contents of the log file in which the log is output are cleared. |
Specify the value using an integer from 1 to 2097151. |
8192 |
07-50 |