19.8.3 Messages starting with AH
-
AH01876
mod_ssl/aa....aa compiled against Server: bb....bb cc....cc, Library: dd....dd
aa....aa: Product version
bb....bb: Product name
cc....cc: Product version
dd....dd: Information about the library
- Description
-
This message outputs the information about the OpenSSL library and the information about the SSL module.
-
AH01883
Init: Initialized OpenSSL library
- Description
-
The OpenSSL library will be initialized.
-
AH01887
Init: Initializing (virtual) servers for SSL
- Description
-
The SSL settings of the server will be initialized.
-
AH01895
Unable to configure verify locations for client authentication
- Description
-
A CA certificate to be used for client authentication could not be set. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specifications of the SSLCACertificateFile and SSLCACertificatePath directives.
-
AH01896
Unable to determine list of acceptable CA certificates for client authentication
- Description
-
The list of CA certificates that can be used for client authentication could not be determined. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specifications of the SSLCACertificateFile and SSLCACertificatePath directives.
-
AH01897
Init: Oops, you want to request client authentication, but no CAs are known for verification!? [Hint: SSLCACertificate*]
- Description
-
No CA required to verify client authentication exists. Continues processing to start the Web server.
- Action
-
Check and, if necessary, revise the specifications of the SSLCACertificateFile and SSLCACertificatePath directives.
-
AH01898
Unable to configure permitted SSL ciphers
- Description
-
The types of SSL encryption to be permitted could not be set. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specification of the SSLCipherSuite directive.
-
AH01899
Host aa....aa:bb....bb: CRL checking has been enabled, but neither SSLCARevocationFile nor SSLCARevocationPath is configured
aa....aa: Host name
bb....bb: Port number
- Description
-
Although CRL checking is enabled, the SSLCARevocationFile is not specified. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specifications of the SSLCARevocationCheck and SSLCARevocationFile directives.
-
AH01901
Host aa....aa:bb....bb: unable to configure X.509 CRL storage for certificate revocation
aa....aa: Host name
bb....bb: Port number
- Description
-
The CRL for revoking the certificate could not be set. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specification of the SSLCARevocationFile directive.
-
AH01902
Host aa....aa:bb....bb: X.509 CRL storage locations configured, but CRL checking (SSLCARevocationCheck) is not enabled
aa....aa: Host name
bb....bb: Port number
- Description
-
Although the CRL storage location is set, CRL checking is not enabled. Continues processing to start the Web server.
- Action
-
Revise the specification of the SSLCARevocationCheck directive to enable CRL checking.
-
AH01909
aa....aa:bb....bb:cc....cc server certificate does NOT include an ID which matches the server name
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
- Description
-
The server certificate does not include any ID that matches the server name. Continues processing to start the Web server.
- Action
-
Make sure that the server certificate matches the server name.
-
AH01914
Configuring server aa....aa:bb....bb for SSL protocol
aa....aa: Host name
bb....bb: Port number
- Description
-
SSL settings will be specified for the server.
-
AH01915
Init: (aa....aa:bb....bb) You configured HTTPS(443) on the standard HTTP(80) port!
aa....aa: Host name
bb....bb: Port number
- Description
-
Although SSL is enabled, the port number 80, which is the standard port number for the HTTP protocol, is set. Continues processing to start the Web server.
- Action
-
Revise the port number specification of the port that the server uses to receive requests.
-
AH01916
Init: (aa....aa:bb....bb) You configured HTTP(80) on the standard HTTPS(443) port!
aa....aa: Host name
bb....bb: Port number
- Description
-
Although SSL is disabled, the port number 443, which is the standard port number for the HTTPS protocol, is set. Continues processing to start the Web server.
- Action
-
Revise the port number specification of the port that the server uses to receive requests.
-
AH01962
Unable to create a new SSL connection from the SSL context
- Description
-
No SSL connection could be generated from the SSL context. Cannot connect via SSL.
- Action
-
Take action according to the error message that is output together with this message.
-
AH01963
Unable to set session id context to 'aa....aa'
aa....aa: Data for identifying the server
- Description
-
Data could not be set for the session ID context. Cannot connect via SSL.
- Action
-
Take action according to the error message that is output together with this message.
-
AH01996
SSL handshake failed: HTTP spoken on HTTPS port; trying to send HTML error page
- Description
-
An SSL handshake failed: The HTTPS port received an HTTP request.
-
AH01998
Connection closed to child aa....aa with abortive shutdown (server bb....bb:cc....cc)
aa....aa: Unique ID that identifies the server
bb....bb: Host name
cc....cc: Port number
- Description
-
A connection to the server indicated by an ID was closed.
-
AH02011
No acceptable peer certificate available
- Description
-
There are no client certificates that can be accessed.
-
AH02036
Faking HTTP Basic Auth header: "Authorization: aa....aa"
aa....aa: Header value
- Description
-
Basic authentication using a client certificate will be performed.
-
AH02039
Certificate Verification: Error (aa....aa): bb....bb
aa....aa: Error number
bb....bb: Error string
- Description
-
Client authentication failed. Stops the SSL request processing.
-
AH02040
Certificate Verification: Certificate Chain too long (chain has aa....aa certificates, but maximum allowed are only bb....bb)
aa....aa: Number of chained CA certificates
bb....bb: Value of the SSLVerifyDepth directive
- Description
-
Certificate verification failed because the received client certificate is located deeper than the depth specified in the SSLVerifyDepth directive. Stops the SSL request processing.
- Action
-
Check the value specified in the SSLVerifyDepth directive. If the client certificate is not accepted, no action is required.
-
AH02042
rejecting client initiated renegotiation
- Description
-
A renegotiation request from the client was rejected.
Stops the SSL request processing.
-
AH02219
access to aa....aa failed, reason: SSL connection required
aa....aa: Requested file
- Description
-
The path at which the SSLRequireSSL directive is specified was accessed without using SSL. The system returns the status code 403 Forbidden to the client and stops processing the request.
-
AH02231
No SSL protocols available [hint: SSLProtocol]
- Description
-
No available protocols are specified in the SSLProtocol directive. Does not start the Web server.
- Action
-
Check and, if necessary, revise the specification of the SSLProtocol directive.
-
AH02311
Fatal error initialising mod_ssl, exiting. See aa....aa for more information
aa....aa: Error log file name
- Description
-
A fatal error occurred during initialization of mod_ssl. Does not start the Web server.
- Action
-
In the error log file indicated in the message, find the message that has been output together with this message, and then review the cause of the error indicated in the message found.
-
AH02312
Fatal error initialising mod_ssl, exiting.
- Description
-
A fatal error occurred during initialization of mod_ssl. Does not start the Web server.
- Action
-
Review the cause of the error indicated in the message that has been output together with this message.
-
AH02562
Failed to configure certificate aa....aa:bb....bb:cc....cc (with chain), check dd....dd
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
dd....dd: Certificate file name
- Description
-
A server certificate could not be set. Does not start the Web server.
- Action
-
Review the certificate file specified in the SSLCertificateFile directive.
-
AH02564
Failed to configure encrypted (?) private key aa....aa:bb....bb:cc....cc, check dd....dd
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
dd....dd: Private key file name
- Description
-
A server private key could not be set. Does not start the Web server.
- Action
-
Review the server private key file specified in the SSLCertificateKeyFile directive.
-
AH02565
Certificate and private key aa....aa:bb....bb:cc....cc from dd....dd and ee....ee do not match
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
dd....dd: Certificate file name
ee....ee: Private key file name
- Description
-
The server certificate and server private key are not paired correctly. Does not start the Web server.
- Action
-
Revise the specifications of the SSLCertificateFile and SSLCertificateKeyFile directives so that a private key and certificate are set as a correct pair.
-
AH02568
Certificate and private key aa....aa:bb....bb:cc....cc configured from dd....dd and ee....ee
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
dd....dd: Certificate file name
ee....ee: Private key file name
- Description
-
A server certificate and server private key were set.
-
AH02569
Illegal attempt to re-initialise SSL for server (SSLEngine On should go in the VirtualHost, not in global scope.)
- Description
-
An illegal attempt was made to re-initialize the SSL settings for the server. Does not start the Web server.
- Action
-
Check the SSL settings in the virtual host. (If SSL settings are enabled outside the virtual host, at least one SSL-related directive must be set inside the virtual host.)
-
AH02572
Failed to configure at least one certificate and key for aa....aa:bb....bb
aa....aa: Host name
bb....bb: Port number
- Description
-
No server certificate and server private key are set. Does not start the Web server.
- Action
-
To enable SSL, set at least one server certificate and server private key.
-
AH02576
Attempting to load encrypted (?) private key aa....aa:bb....bb:cc....cc
aa....aa: Host name
bb....bb: Port number
cc....cc: Index number
- Description
-
A password-protected server private key will be loaded.
-
AH02577
Init: SSLPassPhraseDialog builtin is not supported on Win32 (key file aa....aa)
aa....aa: Server private key file name
- Description
-
The Windows edition does not support an interactive interface for entering a password for a password-protected private key. Does not start the Web server.
- Action
-
Consider canceling password protection for a server private key.
-
AH10104
aa....aa:bb....bb, SSLSrvConfigRec shared from cc....cc:dd....dd
aa....aa: Host name
bb....bb: Port number
cc....cc: Host name
dd....dd: Port number
- Description
-
SSL settings are shared. Continues processing to start the Web server.
- Action
-
Review the <VirtualHost> settings to determine whether SSL settings can be shared.