3.8 Opening ports on the router and setting up a firewall on each server
You need to open the ports on the router and set up a firewall on each server.
The following shows the port numbers used and the connection direction:
|
Port number |
Connection direction |
|||||
|---|---|---|---|---|---|---|
|
Internet -> DMZ |
Internet <- DMZ |
DMZ -> Intranet |
DMZ <- Intranet |
Intranet <- Internet |
Intranet -> Internet |
|
|
26080/tcp |
-- |
-- |
-- |
-- |
Y |
-- |
|
26055/tcp |
Y |
-- |
-- |
Y |
-- |
-- |
|
2195/tcp |
-- |
Y |
-- |
-- |
-- |
-- |
|
80/tcp |
-- |
Y |
-- |
-- |
-- |
-- |
|
26079/tcp |
Y |
-- |
-- |
-- |
-- |
-- |
|
26067/tcp |
-- |
-- |
Y |
-- |
-- |
-- |
|
26068-26077/tcp |
-- |
-- |
-- |
Y |
-- |
-- |
|
5223/tcp |
-- |
-- |
-- |
-- |
-- |
Y |
- Legend:
-
Y: Applicable connection direction
--: Inapplicable connection direction
The following describes the port numbers:
-
26080: Port for management modules
-
26055: HTTPS communication port
-
2195: Port for communication with the APNs server. This port is required only for managing iOS devices.
-
80: HTTPS communication port. This port is required only for managing iOS devices.
-
26079: Port for HTTP communication between an Android device and the messaging server.
-
26067: Port for communication between the communication server and the database in the smart device manager (database receiving port)
-
26068-26077: Ports for communication between the communication server and the database in the smart device manager (communication server receiving port)
-
5223: Port for communication between iOS devices and the APNs server. This port is required only for managing iOS devices connected via Wi-Fi.
Related Topics