20.2.21 NetworkInfo (network information)

This class manages the location of a device in the network.

You can import or export this class. For details about importing by jamCsvImport.bat, see the section describing import processing by the Import job menu.

You can also specify this class as a search condition when creating a user report.

The following table lists the properties of NetworkInfo.

Table 20‒52: Properties of NetworkInfo
Property	Key	Description	Type [maximum length (bytes)]	Remarks	Specification in jamimport
`AssetID`	K	Asset ID	uint32	This is the ID of the asset. If you are specifying this information for an import operation, specify the same value as for the corresponding object class `AssetInfo`.	M
`ComputerName`	N	Computer name	string[512]	This is the name of the computer. It is converted into upper-case letters.	O
`CreationClassName`	K	CCN	string[32]	This is `NetworkInfo`.	M
`DefaultGateway`	N	Default Gateway	string[70]	This is the default gateway.	O
`DHCPServerName`	N	DHCP server name	string[255]	This is the DHCP server name.	O
`GlobalIPAddress`	N	Global IP address	string[70]	This is the global IP address.	O
`InfoInd`	N	ITDM2 management information acquisition control	string[3]	If the Import job menu is used for importing, `1` is always set.	R
`IPAddress`	N	IP address	string[70]	This is the IP address. If you are updating this information for an import operation, delete the existing IP address from the association class `IPAddressLink` and then register the new IP address and also update the association.	O
`IPAddressKind`	N	IP address type	string[3]	See IP address type. If you are registering the asset as `IPv4`, you must import the association class `IPAddressLink` (IP address link).	O
`MACAddress`	N	MAC address	string[17]	This is the MAC address.	O
`NetworkID`	K	Network info ID	uint32	This is a unique ID that identifies the network information. When new information is imported, assign a unique value in the range 10001 to 1000000000.	M
`NodeName`	N	Node name (host name)	string[512]	This is the node name (host name). It is converted into lower-case letters.	O
`PortInfo`	N	Port information	string[255]	This is the port information.	O
`SubnetMask`	N	Subnet mask	string[70]	This is the subnet mask of the IP address	O
`UpdateInd`	N	Update indicator	uint32	This information is used by the asset management system. Do not update it.	O
`UpdateTime`	N	Update control	string[20]	This information is used to control concurrent updating of information.	O
`UserPropertyArea_1`^#	N	User property area-1	string[255]	This item can manage a maximum of 255 bytes of information. With a window operation, multiple character string lines can be specified.	O
`UserPropertyArea_2`^#	N	User property area-2	string[255]		O
`UserPropertyCode_1`^#	N	User property code-1	string[64]	This item can control code information.	O
`UserPropertyCode_2`^#	N	User property code-2	string[64]	This item can control code information.	O
`UserPropertyField128_1`^#	N	User property field 128-1	string[128]	This item can control a maximum of 128 bytes of information.	O
`UserPropertyField128_2`^#	N	User property field 128-2	string[128]		O
`UserPropertyField255_1`^#	N	User property field 255-1	string[255]	This item can manage a maximum of 255 bytes of information.	O
`UserPropertyField255_2`^#	N	User property field 255-2	string[255]	This item can manage a maximum of 255 bytes of information.	O

Legend:

K: Key property

N: Non-key property

M: Mandatory property during registration (omitting this property results in an error)

R: Property whose specification is recommended during new registration (omitting this property does not result in an error)

O: Optional property

#

This is an extended property. You can add managed items by editing the display name of this property and setting it to be displayed using the Customize Managed Items job menu.

The tables below provide details of the property codes.

Table 20‒53: IP address type
Code	Display value
`001`	`IPv4`
`002`	`IPv6`

To Page Top