Hitachi

JP1 Version 12 JP1/IT Desktop Management 2 Configuration Guide


2.8.1 Overview of building a JP1/NETM/NM - Manager linkage configuration system

To build a system that links with JP1/NETM/NM - Manager, you first need to build a minimal configuration system. You can then deploy network control appliances. Next, install JP1/NETM/NM - Manager, and enable linkage with JP1/NETM/NM - Manager.

  1. Build a minimal configuration system.

  2. Deploy and set up a network control appliance in each monitored network segment.

  3. Install JP1/NETM/NM - Manager on the management server.

  4. Set up JP1/NETM/NM - Manager.

    To run JP1/IT Desktop Management 2 in a cluster system, also run JP1/NETM/NM - Manager in a cluster system by installing JP1/NETM/NM - Manager on the same secondary server.

  5. Register network segments and groups to be monitored in JP1/NETM/NM - Manager.

  6. Specify the environment settings of network control appliances in JP1/NETM/NM - Manager.

  7. Set quarantine communication information (settings for quarantine-exempt connections) on the network control appliances.

  8. In the Settings module of JP1/IT Desktop Management 2, click Network Access Control to display the Assign Network Access Control Settings view. Then, for the network segments to be monitored that were registered in JP1/NETM/NM - Manager, change the settings so that notification is not sent when the segments are not monitored.

    If you use the blacklist method to manage network connections, skip step 9. Perform step 9 only if you use the whitelist method to manage network connections.

  9. Edit the network control settings file (jdn_networkcontrol.conf) stored on the management server. For details about this procedure, see 4.6.6 Procedure for editing the network control settings file.

  10. In JP1/IT Desktop Management 2, enable linkage with JP1/NETM/NM - Manager.

    For details about this procedure, see 4.6.5 Enabling the JP1/NETM/NM - Manager linkage settings.

Building of the JP1/NETM/NM - Manager linkage configuration system is complete.

Important

When linking with JP1/NETM/NM - Manager, a list of access-permitted devices and a list of access-denied devices for network control appliance will be replaced by the content of the network control list of JP1/IT Desktop Management 2 - Manager. For this reason, if you have registered a list of access-permitted devices and a list of access-denied devices for network control appliance before linking with JP1/IT Desktop Management 2 - Manager, the content will be lost. When the content is different between the network control list and the list of access-permitted devices and list of access-denied devices for network control appliance that were already registered before linking with JP1/IT Desktop Management 2 - Manager, register them to the network control list first and then link with JP1/NETM/NM - Manager if necessary.

Important

When linking with JP1/NETM/NM - Manager, register the following server in the quarantine communication information on the network control appliances. Also even when the device is disconnected from the network, maintain the communication with the server.

  • Management server

Related Topics: