F.3 MIB objects that are acquired when resources are collected

This appendix describes the collection-target resources of SNMP agents and the MIB objects obtained during resource collection for each resource group. This appendix also describes the collection-target resources of the SSO-Ex resource category and the MIB objects obtained during resource collection for each resource group.

Note that for resources for which the MIB objects to be obtained include the increment per collection interval ( [Figure] ), values are not obtained for the first collection because calculation using an increment requires the previous value. For such resources, therefore, collected data can be saved and the resource status change event can be issued after at least one collection interval passes (from the second collection and thereafter).

Organization of this subsection

(1) Computer group
(2) CPU group
(3) Memory group
(4) Disk group
(5) File System group
(6) Network group
(7) Channel group
(8) Virtual Memory Used Area group
(9) SMS group
(10) HighCapacityNetwork group
(11) IPv6 Network group

(1) Computer group

The following table lists the resources of the computer group and the MIB objects obtained during resource collection.

Table F‒10: MIB objects to be obtained (Computer group)
Resource	Subresource	MIB object acquired
Computer Summary	Host Name	mib2.1.5
	System Up-Time	#21
	System Location	mib2.1.6
	System Contact	mib2.1.4
Operating System Summary	OS Name	mib2.1.1
	OS Version	mib2.1.1
	System Description	mib2.1.1
Process Summary	PID	hp.2.3.1.4.2.1.1
	PPID	hp.2.3.1.4.2.1.4
	UID	hp.2.3.1.4.2.1.3
	Priority	hp.2.3.1.4.2.1.12
	User Name	hp.2.3.1.4.2.1.30
	User CPU	hp.2.3.1.4.2.1.15
	System CPU	hp.2.3.1.4.2.1.16
	Start Command	hp.2.3.1.4.2.1.22
	Status	hp.2.3.1.4.2.1.19
	Data Size	hp.2.3.1.4.2.1.5
	Text Size	hp.2.3.1.4.2.1.6
	Stack Size	hp.2.3.1.4.2.1.7
	Nice	hp.2.3.1.4.2.1.8
	TTY Major	hp.2.3.1.4.2.1.9
	TTY Minor	hp.2.3.1.4.2.1.10
	Group ID	hp.2.3.1.4.2.1.11
	Process Address	hp.2.3.1.4.2.1.13
	CPU Utilization	hp.2.3.1.4.2.1.14
	Up-Time	hp.2.3.1.4.2.1.17
	Process Flag	hp.2.3.1.4.2.1.18
	Sleep Address	hp.2.3.1.4.2.1.20
	Last Processor	hp.2.3.1.4.2.1.21
	In-Core Time	hp.2.3.1.4.2.1.23
	Time Slice CPU	hp.2.3.1.4.2.1.24
	Total CPU	hp.2.3.1.4.2.1.25
	FSS Group ID	hp.2.3.1.4.2.1.26
	In-Core CPU Utilization	#8
	In-Core Pages	hp.2.3.1.4.2.1.28
	SUID	hp.2.3.1.4.2.1.29
Job Summary	Job Name	hitachi.5.7.2.14.2.1.2
	Jobstep Name	hitachi.5.7.2.14.2.1.3
	Used CPU	hitachi.5.7.2.14.2.1.4
	Unused CPU	hitachi.5.7.2.14.2.1.5
	Wait Utilization	hitachi.5.7.2.14.2.1.6
	Swap Out Utilization	hitachi.5.7.2.14.2.1.7
	Low Priority	hitachi.5.7.2.14.2.1.8
	High Priority	hitachi.5.7.2.14.2.1.9
	Page In	hitachi.5.7.2.14.2.1.19
	Page Out	hitachi.5.7.2.14.2.1.20
	Page Reclaim	hitachi.5.7.2.14.2.1.21
CPU Load Average	CPU Load Average 1 Min	hp.2.3.1.1.3 / 100
	CPU Load Average 5 Min	hp.2.3.1.1.4 / 100
	CPU Load Average 15 Min	hp.2.3.1.1.5 / 100
CPU Utilization	Total CPU	#1
	User CPU	#2
	System CPU	#3
	Wait CPU	#4
CPU Utilization (VOS3)	Total CPU	hitachi.5.7.2.3.4
	Task CPU	hitachi.5.7.2.3.5
	Action CPU	hitachi.5.7.2.3.6
	Core CPU	hitachi.5.7.2.3.7
System Table Entries	Process	#9
	i Node	#10
	File	#11
File System I/Os	read	hitachi.5.1.2.2.1.10 / `collection-interval`
File System I/Os	write	hitachi.5.1.2.2.1.12 / `collection-interval`
Run Queue Length	Run Queue Length	hitachi.5.1.2.2.1.15
System Calls	System Calls	#5
Interruptions	Interruptions	#6
Context Switches	Context Switches	#7
Active Processes	Wait for Execution	#12
	Wait for Transfer	#13
	Wait for Page In	#14
	Sleep	#15
	Swap Out	#16
Process Size	Total Physical Memory	#17
	Wait Physical Memory	#18
	Total Virtual Memory	#19
	Wait Virtual Memory	#20
Login Users	Login Users	hp.2.3.1.1.2

Legend:: indicates the increment per collection interval.

#1, #2, #3, #4

1. If the agent type is PE, PD, PC, or PA:

UserCpu= [Figure] hp.2.3.1.1.13

NiceCpu= [Figure] hp.2.3.1.1.16

SystemCpu= [Figure] hp.2.3.1.1.14

Interval= [Figure] hp.2.3.1.1.1

#1: (UserCpu + NiceCpu + SystemCpu) / Interval x 100

#2: (UserCpu + NiceCpu) / Interval x 100

#3: SystemCpu / Interval x 100

2. If the agent type is WB, WA, or W1:

UserCpu= [Figure] hitachi.5.1.2.2.1.3

SystemCpu= [Figure] hitachi.5.1.2.2.1.1

IdleCpu= [Figure] hitachi.5.1.2.2.1.2

#1: (UserCpu + SystemCpu) / (UserCpu + SystemCpu + IdleCpu) x 100

#2: UserCpu / (UserCpu + SystemCpu + IdleCpu) x 100

#3: SystemCpu / (UserCpu + SystemCpu + IdleCpu) x 100

3. If the agent type is AA:

UserCpu=hitachi.5.1.2.3.1.1

SystemCpu=hitachi.5.1.2.3.1.2

WaitCpu=hitachi.5.1.2.3.1.4

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

4. If the agent type is SB:

UserCpu=hitachi.5.1.2.4.1.1

SystemCpu=hitachi.5.1.2.4.1.2

WaitCpu=hitachi.5.1.2.4.1.4

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

5. If the agent type is LA:

UserCpu=hitachi.5.1.2.5.1.1

SystemCpu=hitachi.5.1.2.5.1.2

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

6. If the agent type is T1:

UserCpu=hitachi.5.1.2.6.1.1

SystemCpu=hitachi.5.1.2.6.1.2

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

7. If the agent type is SD, SC, AC, or AB:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

WaitCpu=hitachi.5.1.2.1.10.5

#1: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

8. If the agent type is LB:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

9. If the agent type is LD, or LC:

UserCpu=hitachi.5.1.2.1.10.3

SystemCpu=hitachi.5.1.2.1.10.4

WaitCpu= hitachi.5.1.2.1.10.5

#1: UserCpu + SystemCpu

#2: UserCpu

#3: SystemCpu

#4: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

10. If the agent type is PF:

UserCpu= [Figure] hitachi.5.1.2.1.24.13

NiceCpu= [Figure] hitachi.5.1.2.1.24.16

SystemCpu= [Figure] hitachi.5.1.2.1.24.14

Interval= [Figure] hitachi.5.1.2.1.24.1

#1: (UserCpu + SystemCpu + NiceCpu) / Interval x 100

#2: (UserCpu + NiceCpu) / Interval x 100

#3: SystemCpu / Interval x 100

#5

If the agent type is PD, PA, AB, or AA:

[Figure] hitachi.5.1.2.1.2.32 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.32 / collection-interval

If the agent type is WB, WA, or W1:

[Figure] hitachi.5.1.2.2.1.16 / collection-interval

#6

If the agent type is PD, PA, AB, or AA:

[Figure] hitachi.5.1.2.1.2.19 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.19 / collection-interval

If the agent type is WB, WA, or W1

[Figure] hitachi.5.1.2.2.1.18 / collection-interval

#7

If the agent type is PD, PA, AB, or AA:

[Figure] hitachi.5.1.2.1.2.31 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.31 / collection-interval

If the agent type is WB, WA, or W1:

[Figure] hitachi.5.1.2.2.1.5 / collection-interval

#8

If the agent type is PF, PE, PD, PC, or PA:

hp.2.3.1.4.2.1.27

#9

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.24

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.24

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#10

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.25

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.25

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#11

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.26

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.26

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#12

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.7

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#13

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.8

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.8

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#14

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.9

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.9

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#15

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.10

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#16

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.11

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.11

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#17

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.16

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.16

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#18

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.17

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.17

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#19

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.14

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.14

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#20

If the agent type is PD, or PA:

hitachi.5.1.2.1.1.15

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.14.15

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#21

If the agent type is PF, SD, AC, or LD:

hitachi.5.1.2.1.24.1

Other than the above:

hp.2.3.1.1.1

To Page Top

(2) CPU group

The following table lists the resources of the CPU group and the MIB objects obtained during resource collection.

Table F‒11: MIB objects to be obtained (CPU group)
Resource	Subresource	MIB object acquired
CPU Summary	CPU Quantity	#1
CPU Load Average	CPU Load Average 1 Min	#6
	CPU Load Average 5 Min	#7
	CPU Load Average 15 Min	#8
CPU Utilization	Total CPU	#2
	User CPU	#3
	System CPU	#4
	Wait CPU	#5
File System I/Os	read	#9
File System I/Os	write	#10
NFS I/Os	read	#11
NFS I/Os	write	#12
Run Queue Length	Run Queue Length	#13
System Calls	exec	#14
	read	#15
	write	#16
I/O Characters	read	#17
	canon	#18
	output	#19

#1

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.1

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.1

If the agent type is WB, WA, or W1:

hitachi.5.1.2.2.4.1

#2, #3, #4, #5

1. If the agent type is PD, or PA:

UserCpu= [Figure] hitachi.5.1.2.1.4.2.1.28

NiceCpu= [Figure] hitachi.5.1.2.1.4.2.1.29

SystemCpu= [Figure] hitachi.5.1.2.1.4.2.1.30

IdleCpu= [Figure] hitachi.5.1.2.1.4.2.1.31

WaitCpu= [Figure] hitachi.5.1.2.1.4.2.1.32

#2: (UserCpu + NiceCpu + SystemCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

In SSO 08-00 or later, the WaitCpu value is not added.

#3: (UserCpu + NiceCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#4: SystemCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#5: WaitCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

2. If the agent type is PF, PE, or PC:

UserCpu= [Figure] hitachi.5.1.2.1.17.2.1.28

NiceCpu= [Figure] hitachi.5.1.2.1.17.2.1.29

SystemCpu= [Figure] hitachi.5.1.2.1.17.2.1.30

IdleCpu= [Figure] hitachi.5.1.2.1.17.2.1.31

WaitCpu= [Figure] hitachi.5.1.2.1.17.2.1.32

#2: (UserCpu + NiceCpu + SystemCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

In SSO 08-00 or later, the WaitCpu value is not added.

#3: (UserCpu + NiceCpu) / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#4: SystemCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

#5: WaitCpu / (UserCpu + NiceCpu + SystemCpu + IdleCpu + WaitCpu) x 100

3. If the agent type is WB, WA, or W1:

UserCpu= [Figure] hitachi.5.1.2.2.4.2.1.4

SystemCpu= [Figure] hitachi.5.1.2.2.4.2.1.2

IdleCpu= [Figure] hitachi.5.1.2.2.4.2.1.3

#2: (UserCpu + SystemCpu) / (UserCpu + SystemCpu + IdleCpu) x 100

#3: UserCpu / (UserCpu + SystemCpu + IdleCpu) x 100

#4: SystemCpu / (UserCpu + SystemCpu + IdleCpu) x 100

4. If the agent type is SD, SC, SB, AC, AB, or AA:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

WaitCpu=hitachi.5.1.2.1.10.1.1.4

#2: UserCpu + SystemCpu

In SSO 08-00 or later, the WaitCpu value is not added.

#3: UserCpu

#4: SystemCpu

#5: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

5. If the agent type is LB, or LA:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

#2: UserCpu + SystemCpu

#3: UserCpu

#4: SystemCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

6. If the agent type is LD, or LC:

UserCpu=hitachi.5.1.2.1.10.1.1.2

SystemCpu=hitachi.5.1.2.1.10.1.1.3

WaitCpu=hitachi.5.1.2.1.10.1.1.4

#2: UserCpu + SystemCpu

#3: UserCpu

#4: SystemCpu

#5: WaitCpu

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#6

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.25 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.25 / 100

#7

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.26 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.26 / 100

#8

If the agent type is PD, or PA:

hitachi.5.1.2.1.4.2.1.27 / 100

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.17.2.1.27 / 100

#9

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.2 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.2 / collection-interval

#10

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.3 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.3 / collection-interval

#11

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.6 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.6 / collection-interval

#12

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.7 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.7 / collection-interval

#13

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.11

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.11

#14

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.12 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.12 / collection-interval

#15

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.13 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.13 / collection-interval

#16

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.14 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.14 / collection-interval

#17

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.22 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.22 / collection-interval

#18

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.23 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.23 / collection-interval

#19

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.4.2.1.24 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.17.2.1.24 / collection-interval

To Page Top

(3) Memory group

The following table lists the resources of the memory group and the MIB objects obtained during resource collection.

Table F‒12: MIB objects to be obtained (Memory group)
Resource	Subresource	MIB object acquired
Memory Summary	Physical Memory	#1
	Free Memory	#2
	Memory Utilization	#3
	Configured Swap	#4
	Enabled Swap	#5
	Free Swap	#6
	Swap Utilization	#7
Swap Summary	Swap Type	#8
	Swap Using Flag	#9
	Swap Priority	#10
	Swap Space	#11
	Free Swap	#12
	Mount Point	#13
Memory Utilization	Memory Utilization	#3
Free Memory Size	Free Memory Size	#2
Swap Utilization	Swap Utilization	#7
Free Swap Size	Free Swap Size	#6
Paging Pages	Free	#15
	Load	#16
	Page In	#17
	Page Out	#18
	Swap In	#19
	Swap Out	#20
	Scan	#21
	Reclaimed	#22
Paging Times	Page In	#23
Paging Times	Page Out	#24
Swapping Times	Swap In	#25
Swapping Times	Swap Out	#26
Page Faults	Page Faults	#14
TLB Flashes	TLB Flashes	#27
Free Pages	Free Pages	hitachi.5.7.2.6.59
Free Pages	Free Rblw Pages	hitachi.5.7.2.6.60
Workingset Size	Job Total Workingset Size	hitachi.5.7.2.6.61
Workingset Size	Job Rblw Workingset Size	hitachi.5.7.2.6.62
LSQA pages	LSQA Total Pages	hitachi.5.7.2.6.63
LSQA pages	LSQA Rblw Pages	hitachi.5.7.2.6.64
Common Pages	Common Total Pages	hitachi.5.7.2.6.65
Common Pages	Common Rblw Pages	hitachi.5.7.2.6.66
SQA Pages	SQA Total Pages	hitachi.5.7.2.6.67
SQA Pages	SQA Rblw Pages	hitachi.5.7.2.6.68
NUC Pages	NUC Total Pages	hitachi.5.7.2.6.69
NUC Pages	NCU Rblw Pages	hitachi.5.7.2.6.70
Fix Pages	Fix Total Pages	hitachi.5.7.2.6.71
Fix Pages	Fix Rblw Pages	hitachi.5.7.2.6.72

#1

If the agent type is V3:

hitachi.5.7.2.6.58 x 4

If the agent type is PF, SD, AC, LD, or WB:

hitachi.5.1.2.1.24.8

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

hp.2.3.1.1.8

#2

If the agent type is V3:

hitachi.5.7.2.6.59 x 4

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, SD, AC, LD, or WB:

hitachi.5.1.2.1.24.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

hp.2.3.1.1.7

#3

If the agent type is V3:

(hitachi.5.7.2.6.58 - hitachi.5.7.2.6.59) / hitachi.5.7.2.6.58 x 100

If the agent type is PF, SD, AC, LD, or WB:

(hitachi.5.1.2.1.24.8 - hitachi.5.1.2.1.24.7) / hitachi.5.1.2.1.24.8 x 100

Other than the above:

(hp.2.3.1.1.8 - hp.2.3.1.1.7) / hp.2.3.1.1.8 x 100

#4

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.1

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.1

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is AB, AA, WA, or W1:

hitachi.5.1.2.1.7.1

If the agent type is SC, SB, LC, LB, LA, or T1:

hp.2.3.1.1.10

If the agent type is SD, AC, LD, or WB:

hitachi.5.1.2.1.24.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#5

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.2

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.2

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is WA, or W1:

hitachi.5.1.2.1.7.2

If the agent type is WB:

hitachi.5.1.2.1.24.11

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#6

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.3

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.3

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

If the agent type is AB, AA, WA, or W1:

hitachi.5.1.2.1.7.3

If the agent type is SC, SB, LC, LB, LA, or T1:

hp.2.3.1.1.12

If the agent type is SD, AC, LD, or WB:

hitachi.5.1.2.1.24.12

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#7

If the agent type is PD, or PA:

(hitachi.5.1.2.1.9.1 - hitachi.5.1.2.1.9.3) / hitachi.5.1.2.1.9.1 x 100

If the agent type is PD, or PA:PF, PE, or PC:

(hitachi.5.1.2.1.19.1 - hitachi.5.1.2.1.19.3) / hitachi.5.1.2.1.19.1 x 100

If the agent type is AB, AA, WA, or W1:

(hitachi.5.1.2.1.7.1 - hitachi.5.1.2.1.7.3) / hitachi.5.1.2.1.7.1 x 100

If the agent type is SC, SB, LC, LB, LA, or T1:

(hp.2.3.1.1.10-hp.2.3.1.1.12) / hp.2.3.1.1.10 x 100

If the agent type is SD, AC, LD, or WB:

(hitachi.5.1.2.1.24.10-hitachi.5.1.2.1.24.12) / hitachi.5.1.2.1.24.10 x 100

#8

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.2

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.2

#9

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.3

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.3

#10

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.4

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.4

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#11

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.9 or hitachi.5.1.2.1.9.11.1.10

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.9 or hitachi.5.1.2.1.19.11.1.10

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#12

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.5

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.5

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

#13

If the agent type is PD, or PA:

hitachi.5.1.2.1.9.11.1.14

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.19.11.1.14

#14

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.18 / collection-interval

If the agent type is WB, WA, or W1:

[Figure] hitachi.5.1.2.2.2.9 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.18 / collection-interval

#15

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.16 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.16 / collection-interval

#16

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.17 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.17 / collection-interval

#17

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.26 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.26 / collection-interval

#18

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.27 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.27 / collection-interval

#19

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.28 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.28 / collection-interval

#20

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.29 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.29 / collection-interval

#21

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.37 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.37 / collection-interval

#22

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.38 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.38 / collection-interval

#23

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.24 / collection-interval

If the agent type is AC, AB, or AA:

[Figure] hitachi.5.1.2.1.13.24 / collection-interval

Other than the above:

[Figure] hitachi.5.1.2.1.2.24 / collection-interval

#24

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.25 / collection-interval

If the agent type is AC, AB, or AA:

[Figure] hitachi.5.1.2.1.13.25 / collection-interval

Other than the above:

[Figure] hitachi.5.1.2.1.2.25 / collection-interval

#25

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.14 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.14 / collection-interval

#26

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.2.15 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.15.15 / collection-interval

#27

If the agent type is PD, or PA:

hitachi.5.1.2.1.2.7

If the agent type is PF, PE, or PC:

hitachi.5.1.2.1.15.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

To Page Top

(4) Disk group

The following table lists the resources of the disk group and the MIB objects obtained during resource collection.

Table F‒13: MIB objects to be obtained (Disk group)
Resource	Subresource	MIB object acquired
Disk Busy Utilization	Instance Name	#3
Disk Busy Utilization	Disk Busy Utilization	#4
Disk Busy	Disk Busy	#1
Disk I/Os	Instance Name	#5
	read	#6
	write	#7
Data Transfers	Instance Name	#8
Data Transfers	Data Transfers	#2

Legend:

[Figure] indicates the increment per collection interval.

#1

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.5.2.1.4 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.18.2.1.4 / collection-interval

#2

If the agent type is PD, or PA:

[Figure] hitachi.5.1.2.1.5.2.1.7 / collection-interval

If the agent type is PF, PE, or PC:

[Figure] hitachi.5.1.2.1.18.2.1.7 / collection-interval

If the agent type is LD, or LC:

[Figure] hitachi.5.1.2.1.23.2.1.6 / collection-interval

#3

If the agent type is SB:

hitachi.5.1.2.1.8.2.1.1

If the agent type is SD, SC, or AB:

hitachi.5.1.2.1.22.1.1.1, hitachi.5.1.2.1.22.1.1.2

If the agent type is AC, LD, or LC

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

#4

If the agent type is SB:

hitachi.5.1.2.1.8.2.1.2

If the agent type is SD, SC, or AB:

hitachi.5.1.2.1.22.1.1.3

If the agent type is AC, LD, or LC:

[Figure] hitachi.5.1.2.1.23.2.1.3 / 1000 / collection-interval x 100

#5

If the agent type is AC, LD, or LC:

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

Other than the above:

Hitachi.5.1.2.3.2.2.1.2

#6

If the agent type is AC, LD, or LC:

[Figure] hitachi.5.1.2.1.23.2.1.4 / collection-interval

Other than the above:

[Figure] Hitachi.5.1.2.3.2.2.1.3 / collection-interval

#7

If the agent type is AC, LD, or LC:

[Figure] hitachi.5.1.2.1.23.2.1.5 / collection-interval

Other than the above:

[Figure] Hitachi.5.1.2.3.2.2.1.4 / collection-interval

#8

If the agent type is LD, or LC:

hitachi.5.1.2.1.23.2.1.1, hitachi.5.1.2.1.23.2.1.2

To Page Top

(5) File System group

The following table lists the resources of the file system group and the MIB objects obtained during resource collection.

Table F‒14: MIB objects to be obtained (File System group)
Resource	Subresource	MIB object acquired
File System Summary	Instance Name	#5
	File System Name	#6
	Total Size	#1
	Used Size	#2
	Free Size	#3
	Available Size	#4
	Utilization	#7
File System Utilization	Instance Name	#5
File System Utilization	File System Utilization	#7
File System Available	Instance Name	#5
File System Available	File System Available	#4

#1

If the agent type is W1:

hp.2.3.1.2.2.1.4

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.5 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.5

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.4 x hp.2.3.1.2.2.1.7) / 1024

#2

If the agent type is W1:

hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

((hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6) x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

((hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.2.1.5) x hp.2.3.1.2.2.1.7) / 1024

#3

If the agent type is W1:

hp.2.3.1.2.2.1.5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.6 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.6

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.5 x hp.2.3.1.2.2.1.7) / 1024

#4

If the agent type is W1:

hp.2.3.1.2.2.1.6

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, or LB:

(hitachi.5.1.2.1.21.2.1.7 x hitachi.5.1.2.1.21.2.1.8) / 1024

If the agent type is WB, or WA:

hitachi.5.1.2.1.21.2.1.7

The decimal places .00 are added to resource values that are displayed and output. For details, see 2.2.4 Cautionary notes on the resource monitoring function.

Other than the above:

(hp.2.3.1.2.2.1.6 x hp.2.3.1.2.2.1.7) / 1024

#5

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

hitachi.5.1.2.1.21.2.1.11

Other than the above:

hp.2.3.1.2.2.1.10

#6

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

hitachi.5.1.2.1.21.2.1.4

Other than the above:

hp.2.3.1.2.2.1.3

#7

If the agent type is PF, PE, PD, SD, SC, AC, AB, LD, LC, LB, WB, or WA:

((hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6) / (hitachi.5.1.2.1.21.2.1.5 - hitachi.5.1.2.1.21.2.1.6 + hitachi.5.1.2.1.21.2.1.7)) x 100

Other than the above:

((hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5) / (hp.2.3.1.2.2.1.4 - hp.2.3.1.2.2.1.5 + hp.2.3.1.2.2.1.6)) x 100

To Page Top

(6) Network group

The following table lists the resources of the network group and the MIB objects obtained during resource collection.

Table F‒15: MIB objects to be obtained (Network group)
Resource	Subresource	MIB object acquired
Network Summary	Interface Name	mib2.2.2.1.2
	Interface Type	mib2.2.2.1.3
	Maximum IP Datagram	mib2.2.2.1.4
	Interface Speed	mib2.2.2.1.5
	IP Address	mib2.4.20.1.1 mib2.4.20.1.2
	Subnet Mask	mib2.4.20.1.2 mib2.4.20.1.3
	Interface Address	mib2.2.2.1.6
	Interface Status	mib2.2.2.1.8
Interface Utilization^#	Total	(mib2.2.2.1.10 + mib2.2.2.1.16) x 8 / (`collection-interval` x mib2.2.2.1.5) x 100
Interface Utilization^#	Average	(mib2.2.2.1.10 / 2 + mib2.2.2.1.16 / 2) x 8 / (`collection-interval` x mib2.2.2.1.5) x 100
Interface Uses	InOctets	mib2.2.2.1.10 / `collection-interval`
Interface Uses	OutOctets	mib2.2.2.1.16 / `collection-interval`
Interface Traffic	InUcastPkts	mib2.2.2.1.11 / `collection-interval`
	InNUcastPkts	mib2.2.2.1.12 / `collection-interval`
	InErrors	mib2.2.2.1.14 / `collection-interval`
	OutUcastPkts	mib2.2.2.1.17 / `collection-interval`
	OutNUcastPkts	mib2.2.2.1.18 / `collection-interval`
	OutErrors	mib2.2.2.1.20 / `collection-interval`
IP Traffic	InReceives	mib2.4.3 / `collection-interval`
	InUnknownProtos	mib2.4.7 / `collection-interval`
	InDelivers	mib2.4.9 / `collection-interval`
	OutRequests	mib2.4.10 / `collection-interval`
	OutNoRoutes	mib2.4.12 / `collection-interval`
ICMP Traffic	InMsgs	mib2.5.1 / `collection-interval`
	InErrors	mib2.5.2 / `collection-interval`
	InEchos	mib2.5.8 / `collection-interval`
	InEchoReps	mib2.5.9 / `collection-interval`
	OutMsgs	mib2.5.14 / `collection-interval`
	OutErrors	mib2.5.15 / `collection-interval`
	OutEchos	mib2.5.21 / `collection-interval`
	OutEchoReps	mib2.5.22 / `collection-interval`
TCP Traffic	InSegs	mib2.6.10 / `collection-interval`
	OutSegs	mib2.6.11 / `collection-interval`
	RetransSegs	mib2.6.12 / `collection-interval`
	InErrs	mib2.6.14 / `collection-interval`
	OutRsts	mib2.6.15 / `collection-interval`
UDP Traffic	InDatagrams	mib2.7.1 / `collection-interval`
	InNoPorts	mib2.7.2 / `collection-interval`
	InErrors	mib2.7.3 / `collection-interval`
	OutDatagrams	mib2.7.4 / `collection-interval`
SNMP Traffic	InPkts	mib2.11.1 / `collection-interval`
	OutPkts	mib2.11.2 / `collection-interval`
	OutTooBigs	mib2.11.20 / `collection-interval`
	OutNoSuchNames	mib2.11.21 / `collection-interval`
	OutBadValues	mib2.11.22 / `collection-interval`
	OutGenErrors	mib2.11.24 / `collection-interval`
Ping Response Time	Ping Response Time	hp.2.7.1

Legend:

[Figure] indicates the increment per collection interval.

#:

Use Total in the case of half-duplex communications.

Use Average in the case of full-duplex communications.

To Page Top

(7) Channel group

The following table lists the resources of the channel group and the MIB objects obtained during resource collection.

Table F‒16: MIB objects to be obtained (Channel group)
Resource	Subresource	MIB object acquired
Channel Summary	Channel Quantity	hitachi.5.7.2.10.1
Channel Busy Utilization	Instance Name	hitachi.5.7.2.10.2.1.2
Channel Busy Utilization	Channel Busy Utilization	hitachi.5.7.2.10.2.1.3

To Page Top

(8) Virtual Memory Used Area group

The following table lists the resources of the virtual memory used area group and the MIB objects obtained during resource collection.

Table F‒17: MIB objects to be obtained (Virtual Memory Used Area group)
Resource	Subresource	MIB object acquired
Pages	Instance Name	hitachi.5.7.2.2.1.1.2
Pages	Used Pages	hitachi.5.7.2.2.1.1.3
Area Utilization	Instance Name	hitachi.5.7.2.2.1.1.2
	Area Utilization	hitachi.5.7.2.2.1.1.7
	Max Utilization	hitachi.5.7.2.2.1.1.8

To Page Top

(9) SMS group

The following table lists the resources of the SMS group and the MIB objects obtained during resource collection.

Table F‒18: MIB objects to be obtained (SMS group)
Resource	Subresource	MIB object acquired
Computer Summary	Host Name	hitachi.5.1.5.2.1.1.1.2
Computer Summary	Domain Name	hitachi.5.1.5.2.1.1.1.5
Operating System Summary	OS Name	hitachi.5.1.5.2.4.1.1.3
	OS Version	hitachi.5.1.5.2.4.1.1.4
	Installation Date	hitachi.5.1.5.2.4.1.1.5
	Registered Owner	hitachi.5.1.5.2.4.1.1.6
	Registered Organization	hitachi.5.1.5.2.4.1.1.7
	Build Number	hitachi.5.1.5.2.4.1.1.8
	Build Type	hitachi.5.1.5.2.4.1.1.9
	Root Directory	hitachi.5.1.5.2.4.1.1.10
	Start Option	hitachi.5.1.5.2.4.1.1.11
	Country Code	hitachi.5.1.5.2.4.1.1.12
	Language ID	hitachi.5.1.5.2.4.1.1.13
CPU Summary	CPU Name	hitachi.5.1.5.2.3.1.1.3
CPU Summary	CPU Type	hitachi.5.1.5.2.3.1.1.4
Memory Summary	Physical Memory	hitachi.5.1.5.2.8.1.1.3
	Total Page File Space	hitachi.5.1.5.2.8.1.1.4
	Page File Name	hitachi.5.1.5.2.8.1.1.5
	File Size	hitachi.5.1.5.2.8.1.1.6
	Base Memory	hitachi.5.1.5.2.8.1.1.7
	Extended Memory	hitachi.5.1.5.2.8.1.1.8
Disk Summary	Disk Drive	hitachi.5.1.5.2.7.1.1.3
	Storage Type	hitachi.5.1.5.2.7.1.1.4
	File System Type	hitachi.5.1.5.2.7.1.1.5
	Volume Name	hitachi.5.1.5.2.7.1.1.6
	Serial Number	hitachi.5.1.5.2.7.1.1.7
	Total Size	hitachi.5.1.5.2.7.1.1.8
	Used Size	hitachi.5.1.5.2.7.1.1.9
	Free Size	hitachi.5.1.5.2.7.1.1.10
	Utilization	hitachi.5.1.5.2.7.1.1.11
	Sectors	hitachi.5.1.5.2.7.1.1.12
	Cylinders	hitachi.5.1.5.2.7.1.1.13
	Heads	hitachi.5.1.5.2.7.1.1.14
Network Summary	Network Status	hitachi.5.1.5.2.5.1.1.3
	Software Major Version	hitachi.5.1.5.2.5.1.1.4
	Software Minor Version	hitachi.5.1.5.2.5.1.1.5
	Software Name	hitachi.5.1.5.2.5.1.1.6
	IPX Address	hitachi.5.1.5.2.5.1.1.7
	IP Address	hitachi.5.1.5.2.5.1.1.8
	Subnet Mask	hitachi.5.1.5.2.5.1.1.9
	Default Gateway	hitachi.5.1.5.2.5.1.1.10
	Logon User	hitachi.5.1.5.2.5.1.1.11
	Work Group	hitachi.5.1.5.2.5.1.1.12
	Shell Major Version	hitachi.5.1.5.2.5.1.1.13
	Shell Minor Version	hitachi.5.1.5.2.5.1.1.14
Serial Port Summary	Port Address	hitachi.5.1.5.2.9.1.1.4
	Baud Rate	hitachi.5.1.5.2.9.1.1.5
	Parity Enabled	hitachi.5.1.5.2.9.1.1.6
	Parity	hitachi.5.1.5.2.9.1.1.7
	Byte Size	hitachi.5.1.5.2.9.1.1.8
	Stop Bits	hitachi.5.1.5.2.9.1.1.9
	Carrier Detect	hitachi.5.1.5.2.9.1.1.10
	Dataset Ready	hitachi.5.1.5.2.9.1.1.11
	CTS	hitachi.5.1.5.2.9.1.1.12
Parallel Port Summary	Port Address	hitachi.5.1.5.2.10.1.1.4
Video Summary	Video Mode	hitachi.5.1.5.2.11.1.1.3
	Maximum Rows	hitachi.5.1.5.2.11.1.1.4
	Adapter Type	hitachi.5.1.5.2.11.1.1.5
	Manufacturer	hitachi.5.1.5.2.11.1.1.6
	Display Type	hitachi.5.1.5.2.11.1.1.7
	Second Adapter Type	hitachi.5.1.5.2.11.1.1.8
	BIOS Date	hitachi.5.1.5.2.11.1.1.9
Mouse Summary	Hardware Installed	hitachi.5.1.5.2.12.1.1.3
	Hardware Type	hitachi.5.1.5.2.12.1.1.4
	Manufacturer	hitachi.5.1.5.2.12.1.1.5
	Buttons	hitachi.5.1.5.2.12.1.1.6
	Language ID	hitachi.5.1.5.2.12.1.1.7
	IRQ	hitachi.5.1.5.2.12.1.1.8
BIOS Summary	Manufacturer	hitachi.5.1.5.2.13.1.1.3
	Category	hitachi.5.1.5.2.13.1.1.4
	Release Date	hitachi.5.1.5.2.13.1.1.5
IRQ Summary	IRQ Number	hitachi.5.1.5.2.14.1.1.3
	IRQ Address	hitachi.5.1.5.2.14.1.1.4
	Description	hitachi.5.1.5.2.14.1.1.5
	Detected	hitachi.5.1.5.2.14.1.1.6
	Handled By	hitachi.5.1.5.2.14.1.1.7
Environment Summary	Environment Variable	hitachi.5.1.5.2.16.1.1.3
Environment Summary	Environment Value	hitachi.5.1.5.2.16.1.1.4
Service Summary	Service Name	hitachi.5.1.5.2.17.1.1.3
	Status	hitachi.5.1.5.2.17.1.1.4
	Start Type	hitachi.5.1.5.2.17.1.1.5
	Start Name	hitachi.5.1.5.2.17.1.1.6
	EXE Path	hitachi.5.1.5.2.17.1.1.7
Network Card Summary	Manufacturer	hitachi.5.1.5.2.6.1.1.3
	IRQ	hitachi.5.1.5.2.6.1.1.4
	Port Address	hitachi.5.1.5.2.6.1.1.5
Audited Software Summary	Package Number	hitachi.5.1.5.2.15.1.1.3
	Software Name	hitachi.5.1.5.2.15.1.1.4
	File Path	hitachi.5.1.5.2.15.1.1.5
	File Size	hitachi.5.1.5.2.15.1.1.6
	File Date	hitachi.5.1.5.2.15.1.1.7

To Page Top

(10) HighCapacityNetwork group

The following table lists the resources of the HighCapacityNetwork group and the MIB objects obtained during resource collection.

Table F‒19: MIB objects to be obtained (HighCapacityNetwork group)
Resource	Subresource	MIB object acquired
Interface Utilization	Instance Name^#	mib2.31.1.1.1.18
	HalfDuplex	(mib2.31.1.1.1.6 + mib2.31.1.1.1.10) x 8 / (`collection-interval` x mib2.31.1.1.1.15 x 1000000) x 100
	FullDuplex	(mib2.31.1.1.1.6 / 2 + mib2.31.1.1.1.10 / 2) x 8 / (`collection-interval` x mib2.31.1.1.1.15 x 1000000) x 100
Interface Uses	Instance Name^#	mib2.31.1.1.1.18
	InOctets	mib2.31.1.1.1.6 / `collection-interval`
	OutOctets	mib2.31.1.1.1.10 / `collection-interval`
Interface Traffic	Instance Name^#	mib2.31.1.1.1.18
	InUcastPkts	mib2.31.1.1.1.7 / `collection-interval`
	InMulticastPkts	mib2.31.1.1.1.8 / `collection-interval`
	InBroadcastPkts	mib2.31.1.1.1.9 / `collection-interval`
	OutUcastPkts	mib2.31.1.1.1.11 / `collection-interval`
	OutMulticastPkts	mib2.31.1.1.1.12 / `collection-interval`
	OutBroadcastPkts	mib2.31.1.1.1.13 / `collection-interval`

Legend:: indicates the increment per collection interval.
Note:: SSO collects the resources of the HighCapacityNetwork group regardless of the agent type. However, SSO might be unable to collect resources of the HighCapacityNetwork group with some SNMP agents.
#:: If the value of the mib2.31.1.1.1.18 MIB cannot be obtained, the suffix of a MIB object obtained for a subresource other than the instance name is used as the value.

To Page Top

(11) IPv6 Network group

The following table lists the resources of the IPv6 network group and the MIB objects obtained during resource collection.

Table F‒20: MIB objects to be obtained (IPv6 Network group)
Resource	Subresource	MIB object acquired
IP Traffic	InReceives	mib2.55.1.6.1.1 / `collection-interval`
	InUnknownProtos	mib2.55.1.6.1.6 / `collection-interval`
	InDelivers	mib2.55.1.6.1.9 / `collection-interval`
	OutRequests	mib2.55.1.6.1.11 / `collection-interval`
ICMP Traffic	InMsgs	mib2.56.1.1.1.1 / `collection-interval`
	InErrors	mib2.56.1.1.1.2 / `collection-interval`
	InEchos	mib2.56.1.1.1.8 / `collection-interval`
	InEchoReps	mib2.56.1.1.1.9 / `collection-interval`
	OutMsgs	mib2.56.1.1.1.18 / `collection-interval`
	OutErrors	mib2.56.1.1.1.19 / `collection-interval`
	OutEchos	mib2.56.1.1.1.25 / `collection-interval`
	OutEchoReps	mib2.56.1.1.1.26 / `collection-interval`

Legend:: indicates the increment per collection interval.

SSO collects the resources of the IPv6 Network group regardless of the agent type. However, SSO might be unable to collect resources of the IPv6 Network group with some SNMP agents.

To Page Top