Application Summary Extension (PD_APP2)
- Organization of this page
Function
The Application Summary Extension (PD_APP2) record stores performance data that summarizes by application the records stored in the Application Process Overview (PD_APS) record at a given point in time. One record is stored for each application. This record is a multi-instance record.
- Note:
-
To change the application definition, you must change the settings from PFM - Web Console.
Default values and values that can be specified
Item |
Default value |
Modifiable |
---|---|---|
Collection Interval |
60 |
Yes |
Collection Offset# |
0 |
Yes |
Log |
No |
Yes |
LOGIF |
Blank |
Yes |
Over 10 Sec Collection Time |
No |
No |
Realtime Report Data Collection Mode |
Reschedule |
Yes |
- #
-
A value between 0 and 32,767 seconds can be specified (a value within the range specified for Collection Interval). Use this item to distribute the collection load, because executing data collection all at once results in concentration of the processing workload. Note that the data collection duration to be recorded is the same as the Collection Interval, regardless of the value specified for Collection Offset.
When changing the Collection Offset value, specify a value that takes into account the impact of the collection processing load.
ODBC key field
PD_APP2_APPLICATION_NAME
Lifetime
From the time the application definition is added in PFM - Web Console until it is deleted.
Record size
-
Fixed portion: 681 bytes
-
Variable portion: 153 bytes
Fields
PFM-View name (PFM-Manager name) |
Description |
Smry |
Format |
Delta |
Not sprtd in |
Data source |
---|---|---|---|---|---|---|
Application Exist (APPLICATION_EXIST) |
The application status set from the process monitoring settings. NORMAL or ABNORMAL is displayed. The application status is the result obtained based on the status set for the monitoring targets. To check the status of the monitoring targets, refer to Monitoring Status, which is displayed in the Application Process Detail (PD_APPD) record. NORMAL: The status of least one of the monitoring targets is NORMAL. ABNORMAL: The status of all of the monitoring targets is ABNORMAL. |
-- |
string(10) |
No |
-- |
-- |
Application Name (APPLICATION_NAME) |
The name set in the process monitoring settings |
-- |
string(64) |
No |
-- |
-- |
Application Status (APPLICATION_STATUS) |
The application status set from the process monitoring settings. NORMAL or ABNORMAL is displayed. The application status is the result obtained based on the status set for the monitoring targets. To check the status of the monitoring targets, refer to Monitoring Status, which is displayed in the Application Process Detail (PD_APPD) record. NORMAL: The status of all of the monitoring targets is NORMAL. ABNORMAL: The status of least one of the monitoring targets is ABNORMAL. |
-- |
string(10) |
No |
-- |
-- |
Case Sensitive (CASE_SENSITIVE) |
Distinguishes between upper- and lower-case letters: Yes: Case sensitive No: Not case sensitive |
-- |
string(4) |
No |
-- |
-- |
Interval (INTERVAL) |
Number of seconds in the interval during which the Application Process Detail (PD_APP2) records were stored. Always 0. |
-- |
ulong |
No |
HP-UX, Solaris, AIX, Linux |
-- |
Record Time (RECORD_TIME) |
Time at which the record was created (Greenwich Mean Time) |
-- |
time_t |
No |
-- |
-- |
Record Type (INPUT_RECORD_TYPE) |
Record type. Always APP2. |
-- |
char(8) |
No |
-- |
-- |
Virtual Env ID (VIRTUAL_ENV_ID) |
ID of the virtualized environment created by the virtualized system provided by the OS |
-- |
string(65) |
No |
HP-UX |
-- |