Network Rcvd/sec
- Organization of this page
Overview
The Network Rcvd/sec alarm monitors the number of packets received per second. If the number of packets is large, many packets have been received successfully.
Primary settings
PFM - Web Console alarm property |
Settings |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
UNIX |
Alarm message |
Pkt Rcvd/sec = %CVS1 |
|
Enable alarm |
Selected |
|
Alarm notification |
Notify when the state changed |
|
Notification target |
State changes for the alarm |
|
Evaluate all data |
Do not specify. |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached |
Selected |
|
occurrence(s) during |
4 |
|
interval(s) |
5 |
|
Alarm Conditions |
Record |
Network Interface Summary (PI_NINS) |
Field |
Pkts Rcvd/sec |
|
Abnormal condition |
Pkts Rcvd/sec >= 9#1 |
|
Warning condition |
Pkts Rcvd/sec >= 8#2 |
|
Actions |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
- Legend:
-
--: Setting is always ignored.
- #1
-
Depending on the environment, set a value that is around 90% of the NIC bandwidth.
- #2
-
Depending on the environment, set a value that is around 80% of the NIC bandwidth.
Alarm tables
PFM UNIX Template Alarms [NET] 09.00
Related reports
Reports/UNIX/Troubleshooting/Real-Time/Network Interface Summary