2.3.22 Range of data collected for each virtualized system

Global zone, non-global zone, and PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Hitachi Compute Blade logical partitioning feature environments

The following table describes the data collected by PFM - Agent for Platform running in a virtualized system in the global zone, non-global zone, PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Hitachi Compute Blade logical partitioning feature environments. For example, when you collect data of the PD record in an environment where PFM - Agent for Platform is running in the shared-IP non-global zone, the Shared-IP Non-Global Zone column indicates This zone only. This means that the data only for the shared-IP non-global zone will be collected. When you collect data of the PI record in this environment, the Shared-IP Non-Global Zone column indicates Entire system, which means that the data for the global zone and non-global zones will be collected.

Table 2‒3: Data collected for each virtualized system (global zone, non-global zone, PowerVM, HP Integrity Virtual Machines, VMware/KVM, and Hitachi Compute Blade logical partitioning feature environments)
Record	Global Zone^#1	Non-Global Zone		PowerVM and HP Integrity Virtual Machines	VMware/KVM and Hitachi Compute Blade logical partitioning feature
Record	Global Zone^#1	Shared-IP Non-Global Zone	Exclusive-IP Non-Global Zone	PowerVM and HP Integrity Virtual Machines
`PD`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_APP`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_APP2`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_APPD`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_APS`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_APSI`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_FSL`	Entire system	This zone only	This zone only	Local disk information on the logical partition	Local disk information in the guest OS
`PD_FSR`	Information is collected only for the global zone. Information about a remote file system (NFS) installed in the non-global zone cannot be obtained.	This zone only	This zone only	Remote file system information registered on the logical partition	Remote file system information registered in the guest OS
`PD_PDI`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_PDS`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_PGM`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_TERM`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PD_UPD`	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
`PD_UPDB`	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
`PD_USER`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PI`^#2	Entire system	Entire system	Entire system	System values on the logical partition	System values in the guest OS
`PI_CPUP`	Entire system	Entire system	Entire system	Processor information allocated to the logical partition	Processor information allocated to the guest OS
`PI_DEVD`	Entire system	Entire system	Entire system	Disk information allocated to the logical partition	Disk information allocated to the guest OS
`PI_DEVS`	Entire system	Entire system	Entire system	Disk information allocated to the logical partition	Disk information allocated to the guest OS
`PI_NIND`^#3	Interface information shared by the global zone and all shared-IP non-global zones	--	This zone only	NIC information allocated to the logical partition	NIC information allocated to the guest OS
`PI_NINS`^#3	Interface information shared by the global zone and all shared-IP non-global zones	--	This zone only	NIC information allocated to the logical partition	NIC information allocated to the guest OS
`PI_UPI`	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
`PI_UPIB`	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
`PI_WGRP`	Entire system	This zone only	This zone only	Processes on the logical partition	Processes on the guest OS
`PI_XUI1` to `PI_XUI5`	Specified value	Specified value	Specified value	Performance data that the user specified on the logical partition	Performance data that the user specified in the guest OS
`PL_MESS`	Specified value	Specified value	Specified value	The file specified in `evfile` or the `Messages` `File` property	The file specified in `evfile` or the `Messages` `File` property

Legend:

--: Not collected

#1

The values of items marked with "Entire system" might differ from the actual values of the entire system.

Therefore, for the "Non - Global Zone" items in the table, use only "This zone only" records.

#2

For the following fields, interface information is collected even in the non-global zone environment:

ICMP Pkts In, ICMP Pkts Out, ICMP6 Pkts In, ICMP6 Pkts Out, IP Pkts In, IP Pkts Out, IP6 Pkts In, IP6 Pkts Out, TCP Pkts In, TCP Pkts Out, Total Pkts, Total Pkts In, Total Pkts Out, UDP Pkts In, UDP Pkts Out

For the following fields, information is not collected in the non-global zone environment:

NFS Server Lookup Ops, NFS Server Ops/sec, NFS Server Read Ops, NFS Server Read Ops/sec, NFS Server Total Bad Ops, NFS Server Total Ops, NFS Server Write Ops, NFS Server Write Ops/sec, Cache Mem %, Cache Mem Mbytes, Effective Free Mem %, Effective Free Mem Mbytes

Also, the correct value is not collected in the non-global zone environment for the following fields:

Effective Used Mem %, Effective Used Mem Mbytes

(For Effective Used Mem %, 100.0000 is collected, and for Effective Used Mem Mbytes, the same value as Total Physical Mem Mbytes is collected.)

#3

Physical interface information is collected. Because the shared-IP non-global zone is a logical zone, no information is collected.

WPAR environment

The following table describes the data collected by PFM - Agent for Platform running in a WPAR environment. For example, when you collect data of the PD record in an environment where PFM - Agent for Platform is running in a system WPAR environment, the System WPAR column indicates System WPAR environment. This means that the data only for the system WPAR environment is collected. When you collect data of the PI record in this environment, the System WPAR column indicates Global environment and system WPAR environment, which means that the data for the global environment and system WPAR environments will be collected.

Table 2‒4: Data collected for each virtualized system (WPAR environment)
Record	Field	Global environment	System WPAR
`PD`	All	Global environment	System WPAR environment
`PD_APP`	All	Global environment	System WPAR environment
`PD_APP2`	All	Global environment	System WPAR environment
`PD_APPD`	All	Global environment	System WPAR environment
`PD_APS`	All	Global environment	System WPAR environment
`PD_APSI`	All	Global environment	System WPAR environment
`PD_FSL`	All	Global environment	System WPAR environment
`PD_FSR`	All	Global environment	System WPAR environment
`PI`^#	`1-Minute Run Queue Avg`, `15-Minute Run Queue Avg`, `5-Minute Run Queue Avg`, `Active CPUs`, `Alloc Mem %`, `Alloc Mem Mbytes`, `Alloc Swap %`, `Alloc Swap Mbytes`, `Block Ops`, `Block Reads`, `Block Writes`, `Cache Read %`, `Cache Write %`, `Context Switches`, `CPU %`, `Effective Free Mem %`, `Effective Free Mem Mbytes`, `Effective Used Mem %`, `Effective Used Mem Mbytes`, `Faults`, `Free Mem %`, `Free Mem Mbytes`, `Free Swap %`, `Free Swap Mbytes`, `Idle %`, `Kernel CPU %`, `Logical I/O Ops`, `Logical Read Mbytes`, `Logical Reads`, `Logical Write Mbytes`, `Logical Writes`, `Major Faults`, `Pages In`, `Pages Out`, `Physical I/O Ops`, `Physical Reads`, `Physical Writes`, `Run Queue`, `Swapped-In Pages`, `Swapped-Out Pages`, `System Calls`, `Total Idle Time`, `Total Kernel-Mode Time`, `Total Page Scans`, `Total Physical Mem Mbytes`, `Total Swap Mbytes`, `Total User-Mode Time`, `Total Wait Time`, `User CPU %`, `Wait %`	Global environment and all WPAR environments	Global environment and system WPAR environment
	`ICMP Pkts In`, `ICMP Pkts Out`, `ICMP6 Pkts In`, `ICMP6 Pkts Out`, `IP Pkts In`, `IP Pkts Out`, `IP6 Pkts In`, `IP6 Pkts Out`, `NFS Client Lookup Ops`, `NFS Client Ops/sec`, `NFS Client Read Ops`, `NFS Client Read Ops/sec`, `NFS Client Total Bad Ops`, `NFS Client Total Ops`, `NFS Client Write Ops`, `NFS Client Write Ops/sec`, `NFS Server Lookup Ops`, `NFS Server Ops/sec`, `NFS Server Read Ops`, `NFS Server Read Ops/sec`, `NFS Server Total Bad Ops`, `NFS Server Total Ops`, `NFS Server Write Ops`, `NFS Server Write Ops/sec`, `Processes`, `Processes Ended`, `Processes Started`, `TCP Pkts In`, `TCP Pkts Out`, `Total Pkts`, `Total Pkts In`, `Total Pkts Out`, `UDP Pkts In`, `UDP Pkts Out`, `Users`	Global environment and all WPAR environments	System WPAR environment
	`Block Reads/sec`, `Block Writes/sec`, `Context Switches/sec`, `Logical Reads/sec`, `Logical Writes/sec`, `Major Faults/sec`, `Page Scans/sec`, `Pages In/sec`, `Pages Out/sec`, `Swapped-In Pages/sec`, `Swapped-Out Pages/sec`, `System Calls/sec`, `Total Faults/sec`	Global environment and all WPAR environments	--
	`Boot Time`, `Interval`, `Record Time`, `System Up Time`	Global environment	System WPAR environment
	`Record Type`	Fixed value	Fixed value
	`Interrupts`, `Interrupts/sec`, `Mem I/O Ops`, `Minor Faults`, `Minor Faults/sec`, `Other Pkts In`, `Other Pkts Out`, `Page Reclaims/sec`, `Page-In Ops`, `Page-In Ops/sec`, `Page-Out Ops`, `Page-Out Ops/sec`, `Page Ops/sec`, `Software Lock Faults`, `Software Lock Faults/sec`, `Swap-In Ops`, `Swap-Ins/sec`, `Swap-Out Ops`, `Swap-Outs/sec`, `Total Page Ops`, `Total Page Reclaims`, `Total Swaps`, `Total Swaps/sec`, `Traps`, `Traps/sec`	--	--
`PI_CPUP`	`CPU %`, `Context Switches`, `Idle %`, `Idle Time`, `System %`, `System Calls`, `System Time`, `User %`, `User Time`, `Wait %`, `Wait Time`	Global environment and all WPAR environments	Global environment and system WPAR environment
	`Context Switches/sec`, `Sys Calls/sec`	Global environment and all WPAR environments	--
	`Boot Time`, `Interval`, `Record Time`, `Up Time`	Global environment	System WPAR environment
	`Processor ID`, `Status`, `Type`	Global environment	Global environment
	`Record Type`	Fixed value	Fixed value
	`Interrupts`, `Interrupts/sec`, `Traps`, `Traps/sec`	--	--
`PI_DEVD`	All	Global environment	--
`PI_DEVS`	All	Global environment	--
`PI_NIND`	All	Global environment	System WPAR environment
`PL_MESS`	All	Global environment	System WPAR environment

Legend:

--: Not collected

#

For the following fields, information is not collected in the system WPAR environment:

NFS Server Lookup Ops, NFS Server Ops/sec, NFS Server Read Ops, NFS Server Read Ops/sec, NFS Server Total Bad Ops, NFS Server Total Ops, NFS Server Write Ops, NFS Server Write Ops/sec

Linux container environment

The following table describes the data collected by PFM - Agent for Platform running in a Linux container environment. For example, suppose that PD record data is to be collected in a container environment in which PFM - Agent for Platform is running. In this case, only data from the container environment is collected, as described in the table below (see the cell under the container environment column in the PD row). Similarly, if PI record data is to be collected in the same environment, data from both the host environment and all container environments is collected (see the cell under the container environment column in the PI row).

Table 2‒5: Data collected for each virtualized system (Linux container environment)
Record	Field	Host environment	Container environment
`PD`	All	Host environment and all container environments^#	Container environment
`PD_APP`	All	Host environment and all container environments^#	Container environment
`PD_APP2`	All	Host environment and all container environments^#	Container environment
`PD_APPD`	All	Host environment and all container environments^#	Container environment
`PD_APS`	All	Host environment and all container environments^#	Container environment
`PD_APSI`	All	Host environment and all container environments^#	Container environment
`PD_FSL`	All	Host environment	Container environment
`PD_FSR`	All	Host environment	Container environment
`PD_PDI`	All	Host environment and all container environments^#	Container environment
`PD_PDS`	All	Host environment and all container environments^#	Container environment
`PD_PGM`	All	Host environment and all container environments^#	Container environment
`PD_TERM`	All	Host environment and all container environments^#	Container environment
`PD_UPD`	All	Specified information	Specified information
`PD_UPDB`	All	Specified information	Specified information
`PD_USER`	All	Host environment and all container environments^#	Container environment
`PI`	`1-Minute Run Queue Avg`, `15-Minute Run Queue Avg`, `5-Minute Run Queue Avg`, `Active CPUs`, `Alloc Mem %`, `Alloc Mem Mbytes`, `Alloc Swap %`, `Alloc Swap Mbytes`, `Boot Time`, `Buffers Mem %`, `Buffers Mem Mbytes`, `Cache Mem %`, `Cache Mem Mbytes`, `Context Switches`, `Context Switches/sec`, `CPU %`, `Effective Free Mem %`, `Effective Free Mem Mbytes`, `Effective Used Mem %`, `Effective Used Mem Mbytes`, `Free Mem %`, `Free Mem Mbytes`, `Free Swap %`, `Free Swap Mbytes`, `Idle %`, `Interrupts`, `Interrupts/sec`, `Kernel CPU %`, `Pages In`, `Pages In/sec`, `Pages Out`, `Pages Out/sec`, `Swapped-In Pages`, `Swapped-In Pages/sec`, `Swapped-Out Pages`, `Swapped-Out Pages/sec`, `System Up Time`, `Total Idle Time`, `Total Kernel-Mode Time`, `Total Physical Mem Mbytes`, `Total Swap Mbytes`, `Total User-Mode Time`, `Total Wait Time`, `User CPU %`, `Wait %`	Host environment and all container environments	Host environment and all container environments
	`ICMP Pkts In`, `ICMP Pkts Out`, `ICMP6 Pkts In`, `ICMP6 Pkts Out`, `IP Pkts In`, `IP Pkts Out`, `IP6 Pkts In`, `IP6 Pkts Out`, `Processes`, `Processes Ended`, `Processes Started`, `TCP Pkts In`, `TCP Pkts Out`, `Total Pkts`, `Total Pkts In`, `Total Pkts Out`, `UDP Pkts In`, `UDP Pkts Out`, `Users`	Host environment and all container environments	Container environment
	`Interval`, `Record Time`	Host environment	Container environment
	`Record Type`	Fixed value	Fixed value
`PI_CPUP`	All	Host environment and all container environments	Host environment and all container environments
`PI_DEVD`	All	Host environment	Host environment
`PI_DEVS`	All	Host environment	Host environment
`PI_NIND`	All	Host environment	Container environment
`PI_NINS`	All	Host environment	Container environment
`PI_UPI`	All	Specified information	Specified information
`PI_UPIB`	All	Specified information	Specified information
`PI_WGRP`	All	Host environment and all container environments^#	Container environment
`PI_XUI1` to `PI_XUI5`	All	Specified information	Specified information
`PL_MESS`	All	--	--

Legend:: --: Not collected
#: If the ALL Container Collection for Process property is set to No, PFM - Agent for Platform does not collect data from container environments.

Organization of this subsection

(1) Identifying processes that have the same name in a virtualized system

(1) Identifying processes that have the same name in a virtualized system

In a virtualized system, a host might contain processes that have the same name. The following describes how to identify such processes in the virtualized system.

(a) Zone environment

If processes that have the same name exist in the global and non-global zones, check the value of the Virtual Env ID field to determine the zone from which the process information for the PD, PD_APP, PD_APP2, PD_APSI and PD_APS records was collected.

PD record

For process information obtained by the PD record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒6: When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created
ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global zone and all non-global zones	ID of each zone^#
`No`	Global zone	`0`

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.

Table 2‒7: When PFM - Agent for Platform is installed in a non-global zone in an environment in which zones have been created
ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID
`No`	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID

Reference note:: The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2‒8: When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created
ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global zone	`0`
`No`	Global zone	`0`

PD_APP record

For process information obtained by the PD_APP record, the following table describes the relationship between the property setting and the obtained information. Note that for the PD_APP record, you can set the ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT property to restrict the environment from which process information is to be collected.

Table 2‒9: When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global zone and all non-global zones	Blank
`Yes`	`0`	Global zone	`0`
`Yes`	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
`Yes`	ID of the nonexistent non-global zone	--	--
`No`	Blank	Global zone	Blank
`No`	`0`	Global zone	`0`
`No`	ID of the existing non-global zone	--	--
`No`	ID of the nonexistent non-global zone	--	--

Legend:: --: Neither collected nor displayed in a report. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Table 2‒10: When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
`Yes`	`0`	--	--
`Yes`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the non-global zone where PFM - Agent for Platform is installed
`Yes`	ID of the non-global zone where PFM - Agent for Platform is not installed	--	--
`No`	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
`No`	`0`	--	--
`No`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the non-global zone where PFM - Agent for Platform is installed
`No`	ID of the non-global zone where PFM - Agent for Platform is not installed	--	--

Legend:

--: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Reference note:

The following table describes the relationship between the property settings and obtained information in an environment in which no zones have been created.

Table 2‒11: When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global zone	Blank
`Yes`	`0`	Global zone	`0`
`Yes`	Value other than `0`	--	--
`No`	Blank	Global zone	Blank
`No`	`0`	Global zone	`0`
`No`	Value other than `0`	--	--

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

PD_APPD and PD_APP2 records

For process information obtained by the PD_APPD and PD_APP2 records, the following table describes the relationship between the property setting and the obtained information.

Table 2‒12: When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Global zone and all non-global zones	Blank
`Yes`	`0`	Global zone	`0`
`Yes`	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
`Yes`	ID of the nonexistent non-global zone	--	--
`No`	Blank	Global zone	Blank
`No`	`0`	Global zone	`0`
`No`	ID of the existing non-global zone	--	--
`No`	ID of nonexistent non-global zone	--	--

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

Table 2‒13: When PFM - Agent for Platform is installed in a non-global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
`Yes`	`0`	--	--
`Yes`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the specified non-global zone
`Yes`	ID of the non-global zone where PFM - Agent for Platform is not installed	--	--
`No`	Blank	Non-global zone where PFM - Agent for Platform is installed	Blank
`No`	`0`	--	--
`No`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	ID of the specified non-global zone
`No`	ID of the non-global zone where PFM - Agent for Platform is not installed	--	--

Legend:

--: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1

This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

#2

The PD_APPD record has no Virtual Env ID field.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2‒14: When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Global zone	Blank
`Yes`	`0`	Global zone	`0`
`Yes`	Value other than `0`	--	--
`No`	Blank	Global zone	Blank
`No`	`0`	Global zone	`0`
`No`	Value other than `0`	--	--

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

PD_APSI record

For process information obtained by the PD_APSI record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒15: When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global zone and all non-global zones	ID of that zone^#2
`Yes`	`0`	Global zone	`0`
`Yes`	ID of the existing non-global zone	Specified non-global zone environment	ID of the specified non-global zone
`Yes`	ID of the nonexistent non-global zone	--^#3	--
`No`	Blank	Global zone	`0`
`No`	`0`	Global zone	`0`
`No`	ID of the existing non-global zone	--^#3	--
`No`	ID of the nonexistent non-global zone	--^#3	--

Legend:: --: Not collected.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.
#3: Not displayed in a report.

Table 2‒16: When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
`Yes`	`0`	--^#2	--
`Yes`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
`Yes`	ID of the non-global zone where PFM - Agent for Platform is not installed	--^#2	--
`No`	Blank	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
`No`	`0`	--^#2	--
`No`	ID of the non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed	Non-global zone where PFM - Agent for Platform is installed
`No`	ID of the non-global zone where PFM - Agent for Platform is not installed	--^#2	--

Legend:

--: Not collected.

#1

#2

Not displayed in a report.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2‒17: When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created
Property settings		Obtained information
ALL ZONE Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global zone	`0`
`Yes`	`0`	Global zone	`0`
`Yes`	Value other than `0`	--^#2	--
`No`	Blank	Global zone	`0`
`No`	`0`	Global zone	`0`
`No`	Value other than `0`	--^#2	--

Legend:: --: Not collected.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: Not displayed in a report.

PD_APS record

For process information obtained by the PD_APS record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒18: When PFM - Agent for Platform is installed in the global zone in an environment in which zones have been created
ALL ZONE Collection for Process setting	Obtained information
ALL ZONE Collection for Process setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global zone and all non-global zones	ID of that zone^#
`No`	Global zone	`0`

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a non-global zone, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that non-global zone.

Table 2‒19: When PFM - Agent for Platform is installed in the non-global zone in an environment in which zones have been created
ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID
`No`	Non-global zone where PFM - Agent for Platform is installed	Non-global zone ID

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no zones have been created.

Table 2‒20: When PFM - Agent for Platform is installed in the global zone in an environment in which no zones have been created
ALL ZONE Collection for Process property setting	Obtained information
ALL ZONE Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global zone	`0`
`No`	Global zone	`0`

(b) WPAR environment

If processes that have the same name exist in the global environment and WPAR environment, check the value of the Virtual Env ID field to determine the environment from which the process information for the PD, PD_APP, PD_APP2, PD_APSI and PD_APS records was collected.

PD record

For process information obtained by the PD record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒21: When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created
ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global environment and all WPAR environments	ID of each WPAR^#
`No`	Global environment	`0`

#: When process information is collected from the global environment, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected from a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to that WPAR environment.

Table 2‒22: When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created
ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	System WPAR environment in which PFM - Agent for Platform is installed	`0`
`No`	System WPAR environment in which PFM - Agent for Platform is installed	`0`

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no system WPAR has been created.

Table 2‒23: When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created
ALL WPAR Collection for Process property setting	Obtained information
ALL WPAR Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global environment	`0`
`No`	Global environment	`0`

PD_APP record

Table 2‒24: When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global environment and all WPAR environments	Blank
`Yes`	`0`	Global environment	`0`
`Yes`	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
`Yes`	ID of the non-existing WPAR	--	--
`No`	Blank	Global environment	Blank
`No`	`0`	Global environment	`0`
`No`	ID of the existing WPAR	--	--
`No`	ID of the non-existing WPAR	--	--

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Table 2‒25: When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
`Yes`	`0`	System WPAR environment in which PFM - Agent for Platform is installed	`0`
`Yes`	Value other than `0`	--	--
`No`	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
`No`	`0`	System WPAR environment in which PFM - Agent for Platform is installed	`0`
`No`	Value other than `0`	--	--

Legend:

--: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

Reference note:

The following table describes the relationship between the property settings and obtained information in an environment in which no system WPAR has been created.

Table 2‒26: When PFM - Agent for Platform is installed in a global environment in an environment in which no system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	ADD AN APPLICATION MONITORING SETTING FOR VIRTUAL ENVIRONMENT	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global environment	Blank
`Yes`	`0`	Global environment	`0`
`Yes`	Value other than `0`	--	--
`No`	Blank	Global environment	Blank
`No`	`0`	Global environment	`0`
`No`	Value other than `0`	--	--

Legend:: --: Not collected. In the ProcessXX Count field, 0 is displayed (where XX is a number between 01 and 15).

PD_APPD and PD_APP2 records

For process information obtained by the PD_APPD and PD_APP2 records, the following table describes the relationship between the property setting and the obtained information.

Table 2‒27: When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Global environment and all WPAR environments	Blank
`Yes`	`0`	Global environment	`0`
`Yes`	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
`Yes`	ID of the non-existing WPAR	--	--
`No`	Blank	Global environment	Blank
`No`	`0`	Global environment	`0`
`No`	ID of the existing WPAR	--	--
`No`	ID of the non-existing WPAR	--	--

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

Table 2‒28: When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	System WPAR environment in which PFM - Agent for Platform is installed	Blank
`Yes`	`0`	System WPAR environment in which PFM - Agent for Platform is installed	`0`
`Yes`	Value other than `0`	--	--
`No`	Blank	System WPAR environment n which PFM - Agent for Platform is installed	Blank
`No`	`0`	System WPAR environment n which PFM - Agent for Platform is installed	`0`
`No`	Value other than `0`	--	--

Legend:

--: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.

#1

#2

The PD_APPD record has no Virtual Env ID field.

Reference note:

The following table describes the relationship between the property setting and obtained information in an environment in which no system WPAR has been created.

Table 2‒29: When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Global environment	Blank
`Yes`	`0`	Global environment	`0`
`Yes`	Value other than 0	--	--
`No`	Blank	Global environment	Blank
`No`	`0`	Global environment	`0`
`No`	Value other than 0	--	--

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

PD_APSI record

For process information obtained by the PD_APSI record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒30: When PFM - Agent for Platform is installed in the global environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global environment and all WPAR environments	ID of the specified WPAR^#2
`Yes`	`0`	Global environment	0
`Yes`	ID of the existing WPAR	Specified WPAR environment	ID of the specified WPAR
`Yes`	ID of the non-existing WPAR	--^#3	--
`No`	Blank	Global environment	`0`
`No`	`0`	Global environment	`0`
`No`	ID of the existing WPAR	--^#3	--
`No`	ID of the non-existing WPAR	--^#3	--

Legend:: --: Not collected.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected in a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to the WPAR environment.
#3: Not displayed in a report.

Table 2‒31: When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	System WPAR environment where PFM - Agent for Platform is installed	`0`
`Yes`	`0`	System WPAR environment where PFM - Agent for Platform is installed	`0`
`Yes`	Value other than `0`	--^#2	--
`No`	Blank	System WPAR environment where PFM - Agent for Platform is installed	`0`
`No`	`0`	System WPAR environment where PFM - Agent for Platform is installed	`0`
`No`	Value other than `0`	--^#2	--

Legend:

--: Not collected.

#1

#2

Not displayed in a report.

Reference note:

The following table describes the relationship between the property setting and the obtained information in an environment in which no system WPAR has been created.

Table 2‒32: When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created
Property settings		Obtained information
ALL WPAR Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Global environment	`0`
`Yes`	`0`	Global environment	`0`
`Yes`	Value other than `0`	--^#2	--
`No`	Blank	Global environment	`0`
`No`	`0`	Global environment	`0`
`No`	Value other than `0`	--^#2	--

Legend:: --: Not collected.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: Not displayed in a report.

PD_APS record

For process information obtained by the PD_APS record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒33: When PFM - Agent for Platform is installed in the global environment in an environment in which a System WPAR has been created
ALL WPAR Collection for Process setting	Obtained information
ALL WPAR Collection for Process setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global environment and all WPAR environments	ID of the specified WPAR^#
`No`	Global environment	`0`

#: When process information is collected from the global zone, the virtualized environment ID (value of the Virtual Env ID field) is 0. When process information is collected in a WPAR environment, the virtualized environment ID (value of the Virtual Env ID field) is the ID assigned to the WPAR environment.

Table 2‒34: When PFM - Agent for Platform is installed in a system WPAR environment in an environment in which a system WPAR has been created
ALL WPAR Collection for Process setting	Obtained information
ALL WPAR Collection for Process setting	Data is collected from:	Virtual Env ID field value
`Yes`	System WPAR environment where PFM - Agent for Platform is installed	`0`
`No`	System WPAR environment where PFM - Agent for Platform is installed	`0`

Reference note:

The following table describes the relationship between the property setting and the obtained information in an environment in which no system WPAR has been created.

Table 2‒35: When PFM - Agent for Platform is installed in the global environment in an environment in which no system WPAR has been created
ALL WPAR Collection for Process setting	Obtained information
ALL WPAR Collection for Process setting	Data is collected from:	Virtual Env ID field value
`Yes`	Global environment	`0`
`No`	Global environment	`0`

(c) Linux-container-based environment

If processes that have the same name exist in host environment and container environment, check the value of the Virtual Env ID field to determine the zone from which the process information for the PD, PD_APP2, PD_APSI and PD_APS records was collected.

PD record

For process information obtained by the PD record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒36: When PFM - Agent for Platform is installed in the host environment in an environment in which container environment have been created
ALL Container Collection for Process property setting	Obtained information
ALL Container Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Host environment and all container environments	The ID of each container^#
`No`	Host environment	`0`

#: Either 0 (in the case of the host environment) or the ID assigned to a container (in the case of the container environment) is stored as the ID of the virtualized environment (value of the Virtual Env ID field)

Table 2‒37: When PFM - Agent for Platform is installed in a container environment in an environment in which container environment have been created
ALL Container Collection for Process property setting	Obtained information
ALL Container Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Container environment in which PFM - Agent for Platform is installed	N/A

PD_APP record

With the PD_APP record, you cannot collect only information about processes running in a specific environment. If you want to collect only information about processes running in a specific environment, use the PD_APP2 record.

Note that when PFM - Agent for Platform is installed on the host environment, the range of data that can be collected for the PD_APP record will depend on the setting specified for the ALL Container Collection for Process property.

For process information obtained by the PD_APP record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒38: When PFM - Agent for Platform is installed in the host environment in an environment in which container environment have been created
Property settings	Obtained information
ALL Container Collection for Process	Data is collected from:
`Yes`	Host environment and all container environments
`No`	Host environment

PD_APPD and PD_APP2 records

For process information obtained by the PD_APPD and PD_APP2 records, the following table describes the relationship between the property setting and the obtained information.

Table 2‒39: When PFM - Agent for Platform is installed in the host environment in an environment in which container environment have been created
Property settings		Obtained information
ALL Container Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Host environment and all container environments	Blank
`Yes`	`0`	Host environment	`0`
`Yes`	The ID of an existing container	The specified container environment	The ID of the specified container
`Yes`	The ID of a non-existent container	--	--
`No`	Blank	Host environment	Blank
`No`	`0`	Host environment	`0`
`No`	The ID of an existing container	--	--
`No`	The ID of a non-existent container	--	--

Legend:: --: Not collected. For PD_APPD records, 0 is displayed in the Monitoring Count field.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

Table 2‒40: When PFM - Agent for Platform is installed in the container environment in an environment in which container environment have been created
Property settings		Obtained information
ALL Container Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value^#2
`Yes`	Blank	Container environment in which PFM - Agent for Platform is installed	N/A
`Yes`	`0`	Container environment in which PFM - Agent for Platform is installed	N/A
`Yes`	Value other than `0`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Blank	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	`0`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Value other than `0`	Container environment in which PFM - Agent for Platform is installed	N/A

#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: The PD_APPD record has no Virtual Env ID field.

PD_APSI record

For process information obtained by the PD_APSI record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒41: When PFM - Agent for Platform is installed in the host environment in an environment in which container environment have been created
Property settings		Obtained information
ALL Container Collection for Process	Virtual Environment ID^#1	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Host environment and all container environments	The ID of each container^#2
`Yes`	`0`	Host environment	`0`
`Yes`	The ID of an existing container	The specified container environment	The ID of the specified container
`Yes`	The ID of a non-existent container	--^#3	--
`No`	Blank	Host environment	`0`
`No`	`0`	Host environment	`0`
`No`	The ID of an existing container	--^#3	--
`No`	The ID of a non-existent container	--^#3	--

Legend:: --: Not collected.
#1: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.
#2: Either 0 (in the case of the host environment) or the ID assigned to a container (in the case of the container environment) is stored as the ID of the virtualized environment (value of the Virtual Env ID field)
#3: Not displayed in a report.

Table 2‒42: When PFM - Agent for Platform is installed in the container environment in an environment in which container environment have been created
Property settings		Obtained information
ALL Container Collection for Process	Virtual Environment ID^#	Data is collected from:	Virtual Env ID field value
`Yes`	Blank	Container environment in which PFM - Agent for Platform is installed	N/A
`Yes`	`0`	Container environment in which PFM - Agent for Platform is installed	N/A
`Yes`	Value other than `0`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Blank	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	`0`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Value other than `0`	Container environment in which PFM - Agent for Platform is installed	N/A

Legend:: --: Not collected.
#: This is a property displayed when host-name <UNIX> (Agent Collector service) is selected in the Services tree of PFM - Web Console, and then from the Advanced application monitoring - Application monitoring setting tree, an application is selected. This corresponds to the Virtual environment ID in the Process monitoring settings > Create a New Application Definition window or Process monitoring settings > Edit an Application Definition window of the PFM - Web Console's Agents tree.

PD_APS record

For process information obtained by the PD_APS record, the following table describes the relationship between the property setting and the obtained information.

Table 2‒43: When PFM - Agent for Platform is installed in the host environment in an environment in which container environment have been created
ALL Container Collection for Process property setting	Obtained information
ALL Container Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Host environment and all container environments	The ID of each container^#
`No`	Host environment	`0`

#: Either 0 (in the case of the host environment) or the ID assigned to a container (in the case of the container environment) is stored as the ID of the virtualized environment (value of the Virtual Env ID field)

Table 2‒44: When PFM - Agent for Platform is installed in the container environment in an environment in which container environment have been created
ALL Container Collection for Process property setting	Obtained information
ALL Container Collection for Process property setting	Data is collected from:	Virtual Env ID field value
`Yes`	Container environment in which PFM - Agent for Platform is installed	N/A
`No`	Container environment in which PFM - Agent for Platform is installed	N/A

To Page Top