Device Detail (PD_DEV)
- Organization of this page
Function
The Device Detail (PD_DEV) record stores the performance data that shows the state of the file system driver and kernel driver devices at a given point in time. This is a multi-instance record.
Default values and values that can be specified
|
Item |
Default value |
Modifiable |
|---|---|---|
|
Collection Interval |
60 |
Yes |
|
Collection Offset# |
0 |
Yes |
|
Log |
No |
Yes |
|
LOGIF |
Blank |
Yes |
|
Over 10 Sec Collection Time |
No |
No |
|
Realtime Report Data Collection Mode |
Reschedule |
Yes |
- #
-
A value between 0 and 32,767 seconds can be specified (a value within the range specified for Collection Interval). Use this item to distribute the collection load, because executing data collection all at once results in concentration of the processing workload. Note that the data collection duration to be recorded is the same as the Collection Interval, regardless of the value specified for Collection Offset.
ODBC key fields
-
PD_DEV_DEVICE_NAME
-
PD_DEV_DEVICE_TYPE
Lifetime
From the installation of device drivers until their uninstallation.
Record size
-
Fixed portion: 681 bytes
-
Variable portion: 2,392 bytes
Fields
|
PFM-View name (PFM - Manager name name) |
Description |
Smry |
Format |
Delta |
Not sprtd on |
Data source |
|---|---|---|---|---|---|---|
|
Active (ACTIVE) |
Indicates whether the device was active during data collection. The following values are valid: - YES - NO |
-- |
string (8) |
No |
-- |
-- |
|
Depend Group Name (DEPEND_GROUP_NAME) |
List of group names that must be loaded before devices are loaded. If there is no group name that must be loaded, this field is left blank. |
-- |
string (256) |
No |
-- |
-- |
|
Depend Service Name (DEPEND_SERVICE_NAME) |
List of service names that must be loaded before devices are loaded. If there is no service name that must be loaded, this field is left blank. |
-- |
string (256) |
No |
-- |
-- |
|
Device Name (DEVICE_NAME) |
Device name. Name used by the user interface program to identify a device. |
-- |
string (256) |
No |
-- |
-- |
|
Device Type (DEVICE_TYPE) |
One of the following two device driver service types: - FILE_SYSTEM_DRIVER: File system's device driver service - KERNEL_DRIVER: Kernel's device driver service |
-- |
string (36) |
No |
-- |
-- |
|
Error Control (ERROR_CONTROL) |
Severity of the error that occurred during device service startup. The following values are valid. - CRITICAL: If possible, the starting program records the error in an error log. If the startup procedure used the normal configuration that was previously used, the startup fails. In other cases, use the normal configuration that was previously used to restart the system. - IGNORE: The starting program records the error in an error log and continues the startup operation. - NORMAL: The starting program records the error in an error log, displays a message in a pop-up box, and continues the startup operation. - SEVERE: The starting program records the error in an error log. If the startup procedure used the normal configuration that was previously used, the startup operation continues. In other cases, use the normal configuration that was previously used to restart the system. |
-- |
string (16) |
No |
-- |
-- |
|
Group Name (GROUP_NAME) |
Group name in the group list that determines the loading order registered in the registry, to which this device belongs. If the device does not belong to any group, this field is left blank. |
-- |
string (256) |
No |
-- |
-- |
|
Image Path (IMAGE_PATH) |
Device image path name. If the device is not active, this field is left blank. If the image path name cannot be acquired because no information exists in the registry, this field is left blank. |
-- |
string (1,024) |
No |
-- |
-- |
|
Interval (INTERVAL) |
Always 0. |
-- |
ulong |
No |
-- |
-- |
|
Object Name (OBJECT_NAME) |
Object name used by the system to load device drivers. If the default object name created by the I/O system is to be used as the driver name, this field is left blank. |
-- |
string (256) |
No |
-- |
-- |
|
Record Time (RECORD_TIME) |
Time at which the record was created. |
-- |
time_t |
No |
-- |
-- |
|
Record Type (INPUT_RECORD_TYPE) |
Record name. Always DEV. |
-- |
char (8) |
No |
-- |
-- |
|
Start Constant (START_CONSTANT) |
The device's start value. The following values are available: - AUTO: The device automatically starts when the system starts. - BOOT: The device is started by the system loader. - DISABLED: Device service that cannot be started. - DEMAND: The device is started by SCM when a process calls the StartService facility (API). - SYSTEM: The device is started by the IoInitSystem facility (API). |
-- |
string (24) |
No |
-- |
-- |
|
Tag (TAG) |
Loading order within the group specified by the Group Name field if a tag sequential vector is specified in the field registry. If no device-related tag is specified, the value in this field is 0. |
-- |
long |
No |
-- |
-- |
- Legend:
-
Smry: Summary
Not sprtd on: Not supported on