Event Log (all)
- Organization of this page
Overview
The Event Log (all) alarm monitors all errors and warnings output to the event log. Note that you can use the collection data addition utility to specify the event logs as the target for data collection. For details about the settings required for using the collection data addition utility to collect event log data, see 6.3 Settings for collecting event log information.
- Note
-
This alarm terminates alarm evaluation when at least one abnormal or warning value is detected. Accordingly, not all collected data is evaluated. Because each log in the event log has specific information that is not related to previous evaluation, we recommend that all collected data be evaluated.
To evaluate all data, copy this alarm and create an alarm with Enable alarm, Always notify, and Evaluate all data selected in the PFM - Web Console alarm properties. Then use this alarm to perform monitoring.
Primary settings
PFM - Web Console alarm property |
Settings |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
Windows |
Alarm message |
%CVS1 %CVS2, %CVS3 (%CVS4), %CVS5 |
|
Enable alarm |
Selected |
|
Alarm notification |
Notify when the state changed |
|
Notification target |
State changes for the alarm |
|
Evaluate all data |
Do not specify. |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached. |
Selected |
|
occurrence(s) during |
1 |
|
interval(s) |
1 |
|
Alarm Conditions 1 |
Record |
Event Log (PD_ELOG) |
Field |
Log Name |
|
Abnormal condition |
Log Name <> dummy#1 |
|
Warning condition |
Log Name <> dummy#1 |
|
Alarm Conditions 2 |
Record |
Event Log (PD_ELOG) |
Field |
Event Type Name |
|
Abnormal condition |
Event Type Name = Error |
|
Warning condition |
Event Type Name = Warning |
|
Alarm Conditions 3 |
Record |
Event Log (PD_ELOG) |
Field |
Source Name |
|
Abnormal condition |
Source Name <> dummy#2 |
|
Warning condition |
Source Name <> dummy#2 |
|
Alarm Conditions 4 |
Record |
Event Log (PD_ELOG) |
Field |
Event ID |
|
Abnormal condition |
Event ID <> 0 |
|
Warning condition |
Event ID <> 0 |
|
Alarm Conditions 5 |
Record |
Event Log (PD_ELOG) |
Field |
Description |
|
Abnormal condition |
Description <> dummy#3 |
|
Warning condition |
Description <> dummy#3 |
|
Actions |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
- Legend:
-
--: Setting is always invalid.
- #1
-
Set the type of event log to be monitored. The value used in the table shows an example of setting a condition value satisfies the Log Name field.
- #2
-
Set the name of the source for which entries were generated. The value used in the table shows an example of setting a condition value that satisfies the Source Name field.
- #3
-
Set the description of the event log. The value used in the table shows an example of setting a condition value that satisfies the Description field.
Alarm table
PFM Windows Template Alarms [LOG] 09.00
Related reports
None