Committed Mbytes
- Organization of this page
Overview
The Committed Mbytes alarm monitors the amount of used virtual memory (MB). If the amount of used virtual memory continues to be at or above the threshold (the value of the Total Physical Mem Mbytes field of the PI record), the physical memory area might be insufficient.
Primary settings
PFM - Web Console alarm property |
Settings |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
Windows |
Alarm message |
Committed Mbytes = %CVS1 |
|
Enable alarm |
Selected |
|
Alarm notification |
Notify when the state changed |
|
Notification target |
State changes for the alarm |
|
Evaluate all data |
Do not specify. |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached. |
Selected |
|
occurrence(s) during |
2 |
|
interval(s) |
3 |
|
Alarm Conditions |
Record |
System Overview (PI) |
Field |
Committed Mbytes |
|
Abnormal condition |
Committed Mbytes >= 2046#1 |
|
Warning condition |
Committed Mbytes >= 1024#2 |
|
Actions |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
- Legend:
-
--: Setting is always invalid.
- #1
-
Depending on the environment, set a value around 90% of the value of the Commit Limit Mbytes field in the PI record.
- #2
-
Depending on the environment, set the value of the Total Physical Mem Mbytes field in the PI record.
Alarm table
PFM Windows Template Alarms [MEM] 09.00
Related reports
None