Host Network Status (PI_HNI)
- Organization of this page
Function
This record stores performance data on a physical server's physical NIC over a unit of time. This record is a multi-instance record.
In this record, you can collect performance data such as data send/receive speed. The data send/receive speed can be divided into data receive speed and data send speed. The figure below shows an example of data that can be collected in this record.
|
- Note:
-
-
Information cannot be collected if an attempt to connect to the monitored physical server fails.
-
For Hyper-V, specific symbols included in a network identifier are converted to other symbols when the network identifier is stored in the Net ID field. The conversion rules are as follows:
Before conversion
After conversion
/ and \
-
# and *
_
(
[
)
]
-
Default values and values that can be changed
Item |
Default value |
Can it be changed? |
---|---|---|
Collection Interval |
300 |
Yes |
Collection Offset |
0 |
Yes |
Log |
No |
Yes |
LOGIF |
Blank |
Yes |
Over 10 Sec Collection Time |
No |
No |
ODBC key field
PI_HNI_NET_ID
Lifetime
None
Record size
-
Fixed portion: 937 bytes
-
Variable portion: 397 bytes
Fields
PFM - View name (PFM - Manager name) |
Explanation |
Summary |
Grouping |
Format |
Delta |
When not collected |
Unsup-ported |
---|---|---|---|---|---|---|---|
Record Type (INPUT_RECORD_TYPE) |
The record name. This is always HNI. |
COPY |
COPY |
char (8) |
No |
-- |
Docker environment |
Record Time (RECORD_TIME) |
The time when the record was created. |
COPY |
COPY |
time_t |
No |
-- |
Docker environment |
Interval (INTERVAL) |
Interval during which the information is collected. [Units: seconds] |
COPY |
FIXED |
ulong |
No |
-- |
Docker environment |
VA DeviceID (VADEVICEID) |
The device ID of a monitored host. |
COPY |
COPY |
string(256) |
No |
-- |
Docker environment |
Net ID (NET_ID) |
Network ID. |
COPY |
FIXED |
string (257) |
No |
No |
Docker environment |
Sampling Time (SAMPLING_TIME) |
Sampling time. The time when the performance information is collected on the host machine. Displayed in the following format: yyyy-mm-ddThh:mm[±hh:mm]#1 |
COPY |
FIXED |
string (32) |
No |
Blank |
Docker environment |
Rate (RATE)#2 |
Speed of transmission to and from the network by the host machine. [Units: KBps] For logical partitioning feature, when the associated NIC is running in dedicated mode, the value is always set to -1 and cannot be obtained. |
HILO |
AVG |
double |
No |
VMware: 0 Hyper-V: 0 KVM: 0 logical partitioning feature: -1 Podman environment: 0 |
Docker environment |
Send Rate (SEND_RATE)#2 |
Speed of sending to the network by the host machine. [Units: KBps] For logical partitioning feature, when the associated NIC is running in dedicated mode, the value is always set to -1 and cannot be obtained. |
HILO |
AVG |
double |
No |
VMware: 0 Hyper-V: 0 KVM: 0 logical partitioning feature: -1 Podman environment: 0 |
Docker environment |
Recv Rate (RECV_RATE)#2 |
Speed of receiving from the network by the host machine. [Units: KBps] For logical partitioning feature, when the associated NIC is running in dedicated mode, the value is always set to -1 and cannot be obtained. |
HILO |
AVG |
double |
No |
VMware: 0 Hyper-V: 0 KVM: 0 logical partitioning feature: -1 Podman environment: 0 |
Docker environment |
- #1
-
The value used in [±hh:mm] varies depending on the time zone of the monitored host. For example, if the monitored virtual environment is operating according to JST, +09:00 is displayed. If the monitored virtual environment is operating according to UTC, Z is displayed.
- #2
-
For Hyper-V, KVM or Podman environment this field requires performance data to be collected at least twice.