Used Swap Mbytes
- Organization of this page
Overview
The Used Swap Mbytes alarm monitors the memory usage status.
Main settings
|
Alarm properties in PFM - Web Console |
Setting |
|
|---|---|---|
|
Item |
Details |
|
|
Main Information |
Product |
RM Platform |
|
Alarm message |
Used swap is %CVS megabytes |
|
|
Enable alarm |
Selected |
|
|
Alarm notification |
Notify when the state changed |
|
|
Notification target |
State changes for the alarm |
|
|
Evaluate all data |
Do not specify. |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached |
Selected |
|
|
occurrence(s) during |
2 |
|
|
interval(s) |
3 |
|
|
Alarm Conditions |
Record |
System Summary (PI) |
|
Field |
Used Swap Mbytes |
|
|
Abnormal condition |
Used Swap Mbytes >= 1024#1 |
|
|
Warning condition |
Used Swap Mbytes >= 1024#2 |
|
|
Actions |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
- Legend:
-
--: The setting is always ignored.
- #1
-
A guideline for the value to be set is about 90% of the value set for Total Swap Mbytes.
- #2
-
Set the same value as for Total Mem Mbytes.
Alarm table
PFM RM Platform Template Alarms 10.00
Related reports
Reports/RM Platform/Troubleshooting/Real-Time/Pool Nonpaged Status
- Note
-
1024 is set as the value for this alarm for both abnormal and warning conditions. To use this alarm, change the values for abnormal and warning conditions as appropriate to the user's environment.