Disk Busy %
- Organization of this page
Overview
The Disk Busy % alarm monitors the disk busy rate (%). The monitored value is the percentage of time the disk was busy during read and write request processing.
This value might exceed 100 if processing for the device is executed continuously.
Main settings
|
Alarm properties in PFM - Web Console |
Setting |
|
|---|---|---|
|
Item |
Details |
|
|
Main Information |
Product |
RM Platform |
|
Alarm message |
Disk busy(%CVS1) is %CVS2% |
|
|
Enable alarm |
Selected |
|
|
Alarm notification |
Notify when the state changed |
|
|
Notification target |
State changes for the alarm |
|
|
Evaluate all data |
Do not specify. |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached |
Selected |
|
|
occurrence(s) during |
4 |
|
|
interval(s) |
5 |
|
|
Alarm Conditions |
Record |
Physical Disk Overview (PI_PDSK) |
|
Field |
|
|
|
Abnormal condition |
ID <> "_Total" AND (Busy % >= "90") |
|
|
Warning condition |
ID <> "_Total" AND (Busy % >= "80") |
|
|
Actions |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
- Legend:
-
--: The setting is always ignored.
Alarm table
PFM RM Platform Template Alarms 10.00
Related reports
Reports/RM Platform/Troubleshooting/Real-Time/Physical Disk Busy Status
- Note
-
To display a value in the message text, set a field in the alarm condition expression. For the Disk Busy % alarm, a condition value that always satisfies the ID field is specified.