3.2.2 Details of JP1 events
This section describes the details of JP1 events.
- Organization of this subsection
-
(1) Details of event ID: 0002010
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4400-E The run time of an action for an event exceeded the action delay monitoring time.(Event_ID=event-ID, SEQNO=serial-number-in-event-database, Execution Host=action-execution-host, Action Serial Number=action-serial-number) Delay monitoring notifications will not be sent until suppression of the function for sending notifications to the action delay monitor is canceled. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment variable file |
EXECENV |
Name of the environment variable file used during execution |
||
|
Action serial number |
ACTION_SEQNO |
Serial number of the action |
||
|
ID of the action triggering event |
SRC_EVENT_ID |
Event ID of the event that resulted in execution of the action |
||
|
Inserted time |
SEND_TIME |
Time the action execution request was sent |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(2) Details of event ID: 00002011
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4402-E An event status is abnormal.(event ID = event-ID, event serial number = serial-number-in-event-database, execution host = action-execution-host, action serial number = action-serial-number) Status monitoring notifications will not be sent until suppression of the function for sending notifications to the action status monitor is canceled |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action's status |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment variable file |
EXECENV |
Name of the environment variable file used during execution |
||
|
Action serial number |
ACTION_SEQNO |
Serial number of the action |
||
|
ID of the action triggering event |
SRC_EVENT_ID |
Event ID of the event that resulted in execution of the action |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(3) Details of event ID: 00002012
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8060-E An abnormality was detected in function-name. (host name = host-name, process name = process-name, process ID = process-ID) : maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/HEALTHCHECK |
||
|
Object type |
OBJECT_TYPE |
JCOHC |
||
|
Object name |
OBJECT_NAME |
Name of the function in which the error was detected |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Host |
HOST_NAME |
Host name |
|
|
Process name |
PROCESS_NAME |
Process name |
||
|
Process ID |
PROCESS_ID |
Process ID |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(4) Details of event ID: 00002013
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8062-E An abnormality was detected in function-name. (host name = host-name, process name = process-name) : maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/HEALTHCHECK |
||
|
Object type |
OBJECT_TYPE |
JCOHC |
||
|
Object name |
OBJECT_NAME |
Name of the function in which the error was detected |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Host |
HOST_NAME |
Host name |
|
|
Process name |
PROCESS_NAME |
Process name |
||
|
Process ID |
PROCESS_ID |
Process ID |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(5) Details of event ID: 00002014
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8061-I function-name has been recovered. (host name = host-name, process name = process-name, process ID = process-ID) : maintenance-information#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/HEALTHCHECK |
||
|
Object type |
OBJECT_TYPE |
JCOHC |
||
|
Object name |
OBJECT_NAME |
Name of the recovered function |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Host |
HOST_NAME |
Host name |
|
|
Process name |
PROCESS_NAME |
Process name |
||
|
Process ID |
PROCESS_ID |
Process ID |
||
- Legend:
-
--: None
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: If recovery of JP1/Base Event Service (jevservice) is detected, the following message is issued: KAVB8063-I function-name has been recovered. (host name = host-name, process name = process-name) : maintenance-information.
(6) Details of event ID: 00002015
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4401-I Suppression of the function for sending notifications to the action delay monitor was canceled. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(7) Details of event ID: 00002016
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4403-I Suppression of the function for sending notifications to the action status monitor was canceled. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(8) Details of event ID: 00002020
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4404-E Although the run time of an action exceeded the action delay monitoring time, an action delay notification event could not be sent because no action information exists in the action information file.(action serial number = action-serial-number) Delay monitoring notifications will not be sent until suppression of the function for sending notifications to the action delay monitor is canceled. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action serial number |
ACTION_SEQNO |
Serial number of the action |
|
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(9) Details of event ID: 00002021
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4405-E Although an action status is abnormal, an action state notification event could not be sent because no action information exists in the action information file. Status monitoring notifications will not be sent until suppression of the function for sending notifications to the action status monitor is canceled.: maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Serial number of the action |
|
|
Action status |
ACTION_STATUS |
Action's status |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(10) Details of event ID: 000020A0
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4054-E Automatic Action was terminated abnormally. (Hostname : host-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
TERMINATE |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(11) Details of event ID: 000020A1
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action started |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4050-I Automatic Action was started. : logical-host-name |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
START |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(12) Details of event ID: 000020A2
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4051-I Automatic Action was terminated. : logical-host-name |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
TERMINATE |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(13) Details of event ID: 000020A3
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4055-I The action definition file was read and the automatic action function status was changed to operating. The processing will be based on the definitions read from the subsequently received (arrival-time-of-most-recently-processed-event (YYYY/MM/DD hh:mm:ss)) events. (Definition=total-number-of-effective-definitions/total-number-of-definitions-in-file, SEQNO=serial-number-of-most-recently-processed-event)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: If the automated action has not received the event, -- is displayed for YYYY/MM/DD hh:mm:ss and for serial-number-of-last-event-processed.
(14) Details of event ID: 000020A4
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4056-I Automatic action was suspended. Automatic actions cannot be executed for the subsequently received (arrival-time-of-most-recently-processed-event (YYYY/MM/DD hh:mm:ss)) events. (SEQNO=serial-number-of-most-recently-processed-event)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
STANDBY |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: If the automated action has not received an event, -- is displayed for YYYY/MM/DD hh:mm:ss and for serial-number-of-last-event-processed.
(15) Details of event ID: 000020A5
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the erroneous automated action process was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4909-E An attempt to set locale information has failed. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Occurrence |
OCCURRENCE |
ERROR |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(16) Details of event ID: 000020A6
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Event Base Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the erroneous Event Base Service process was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4909-E An attempt to set locale information has failed. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
ERROR |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(17) Details of event ID: 000020E0
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4430-I Execution of the action for an event was requested.(Event_ID=event-ID, SEQNO=serial-number-in-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
Start time |
START_TIME |
Time the action execution request was completed |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status RUNNING |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(18) Details of event ID: 000020E1
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4431-I Execution of the action for an event ended normally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database, Return_code=termination-code) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action execution request was completed |
||
|
Termination code |
RESULT_CODE |
Action's termination code |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ENDED |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(19) Details of event ID: 000020E2
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4432-E Automatic action or command control of the action for an event ended abnormally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ERROR or FAIL |
||
|
Detailed abnormal termination information |
ERROR_INFO |
Message indicating the nature of the error |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
|
Cause of error |
EXECERR |
Maintenance information in the event of an error |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(20) Details of event ID: 000020E3
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4433-I Execution of the action for an action state notification event was requested.(Event_ID=event-ID, SEQNO=serial-number-in-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
Start time |
START_TIME |
Time the action execution request was completed |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status RUNNING |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(21) Details of event ID: 000020E4
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4434-I Execution of the action for an action state notification event ended normally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database, Return_code=termination-code) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action execution request was completed |
||
|
Termination code |
RESULT_CODE |
Action's termination code |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ENDED |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(22) Details of event ID: 000020E5
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4435-E Automatic action or command control of the action for an action state notification event ended abnormally.(EVENT_ID=event-ID, SEQNO=serial-number-in-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
Object ID |
OBJECT_ID |
Serial number of the event that caused the action |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
End time |
END_TIME |
Time the action terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ERROR or FAIL |
||
|
Detailed abnormal termination information |
ERROR_INFO |
Message indicating the nature of the error |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
|
Cause of error |
EXECERR |
Maintenance information in the event of an error |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(23) Details of event ID: 000020E6
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4436-W Although Execution of the action for an event was requested, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
User name |
USER_NAME |
JP1 user who executed the action |
||
|
Start time |
START_TIME |
Time the action execution request was completed |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status RUNNING |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
|
Environment-variable file name |
EXECENV |
Name of the environment variable file used during execution |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(24) Details of event ID: 000020E7
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4437-W Although Execution of the action for an event ended normally, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
End time |
END_TIME |
Time execution of the action ended |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ENDED |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(25) Details of event ID: 000020E8
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the automated action was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4438-E Although automatic action or command control of the action for an event ended abnormally, an action state notification event could not be sent because no action information exists in the action information file. : maintenance-information |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/JCAMAIN |
||
|
Object type |
OBJECT_TYPE |
ACTION |
||
|
Object name |
OBJECT_NAME |
JCAMAIN |
||
|
End time |
END_TIME |
Time the action terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Action execution host |
EXECHOST |
Name of the host executing the action |
|
|
Action status |
ACTION_STATUS |
Action status ERROR or FAIL |
||
|
Detailed abnormal termination information |
ERROR_INFO |
Message indicating the nature of the error |
||
|
Command |
EXECCMD |
Command whose execution was requested |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(26) Details of event ID: 00003F01
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time of an event that can be acquired |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB1513-W Cannot display some event(S). There were no events to obtain from the event buffer on the connecting host. All the events except the above will be displayed. To search for an event which was not displayed, specify the search conditions in the event search condition settings dialog as follows: (1) In "Search host", specify the name of the connecting host. (2) In "Registered timeframe", specify the times when the events before and after this event were registered. Check to see if the following conditions are met when this event appears frequently. (1) The "Interval" value that was set for "Automatic refresh" in the Preferences window is too long. (2) The "Num. of events to acquire at update" value that was set in the Preferences window is too small. (3) The "Event buffer" value for the Manager that was set in the System Environment Settings window is too small. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
EVENT |
||
|
Object name |
OBJECT_NAME |
\SYSTEM\ALL |
||
|
Occurrence |
OCCURRENCE |
LOST |
||
(27) Details of event ID: 00003F02
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time of an event that can be acquired |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB1540-W Cannot display some event(s). (page = page) There were no events to obtain from the event buffer on the connecting host. All the events except the above will be displayed. To search for an event which was not displayed, specify the search conditions in the event search condition settings dialog as follows: (1) In "Search host", specify the name of the connecting host. (2) In "Registered timeframe", specify the times when the events before and after this event were displayed. Check to see if the following conditions are met when this event appears frequently. (1) The "Interval" value that was set for "Automatic refresh" in the Preferences window is too long. (2) The "Num. of events to acquire at update" value that was set in the Preferences window is too small. (3) The "Event buffer" value for the Manager that was set in the System Environment Settings window is too small. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
EVENT |
||
|
Object name |
OBJECT_NAME |
\SYSTEM\ALL |
||
|
Occurrence |
OCCURRENCE |
LOST |
||
(28) Details of event ID: 00003F03
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB1516-W An error occurred in acquiring an event from the event service. Cannot recover the error after attempting the number of retries specified in the system profile. No more events will be displayed from now on due to this error. Please check if the event service is running or not. If not, recover the error by re-executing the manager after starting the event service. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service |
||
|
Occurrence |
OCCURRENCE |
DISCONNECT |
||
(29) Details of event ID: 00003F04
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB1527-E A condition that cannot be received by the search host is included. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service |
||
|
Occurrence |
OCCURRENCE |
PARAM_ERROR |
||
(30) Details of event ID: 00003F05
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB0246-E The filter condition exceeds the maximum length. (Maximum length:maximum-length) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service |
||
|
Occurrence |
OCCURRENCE |
OVER_LENGTH |
||
(31) Details of event ID: 00003F06
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB0248-E The settings for a regular expression is incorrect. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service or IM database |
||
|
Occurrence |
OCCURRENCE |
REGEXP_ERROR |
||
(32) Details of event ID: 00003F07
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB4764-W An error occurred in acquiring an event from the event service. Please check if the event service is running or not. If not, recover the error by starting the event service. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service |
||
|
Occurrence |
OCCURRENCE |
DISCONNECT |
||
(33) Details of event ID: 00003F08
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB0251-E The search cannot be performed for the specified condition because the search host's JP1/Base does not support the exclusion condition. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
Event Service |
||
|
Occurrence |
OCCURRENCE |
EXCLUDE_ERROR |
||
(34) Details of event ID: 00003F11
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of occurrence |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1577-I A status operation was performed. (user who performed the operation = JP1-user#2, event ID = event-ID, status before operation = status-before-operation#3, status after operation = status-after-operation#3) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
PROCESS |
||
|
User-specific or program-spe-cific information |
Serial number of the handled event |
PROCESSUPDATE_SEQNO |
Serial number of the JP1 event whose action's status was changed (decimal number) |
|
|
Source serial number of the handled event |
PROCESSUPDATE_ORIGINALSEQNO |
Source serial number of the JP1 event whose action's status was changed (decimal number) |
||
|
Event level of the handled event |
PROCESSUPDATE_SEVERITY |
Event level of the JP1 event whose action's status was changed (one of the following: Emergency, Alert, Critical, Error, Warning, Notice, Information, or Debug) |
||
|
Source event server name of the handled event |
PROCESSUPDATE_SOURCESERVER |
Name of the event-issuing server (server that issued the JP1 event whose action's status was changed) |
||
|
Message for the handled event |
PROCESSUPDATE_MESSAGE |
Message (for the JP1 event whose action's status was changed) |
||
|
Registration time of the handled event |
PROCESSUPDATE_TIME |
Time of registration (time the JP1 event whose action's status was changed was registered; displayed in the Event Details window in the format MM/DD hh:mm:ss) |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The value that is actually displayed for JP1-user depends on the status, as follows:
-
When the action status was changed from JP1/IM - View version 08-01 or later: JP1-user-who-changed-the-action-status
-
When the action status was changed from JP1/IM - View version 07-00 or earlier: -
-
When the action status was changed by the jcochstat command: jcochstat
-
When the action status was changed because there was a response to a response-waiting event: system
-
When the action status was changed because a response-waiting event was canceled: system
#3: status-before-action and status-after-action depend on the handling method, as shown below:
-
Processed: PROCESSED
-
Unprocessed: UNPROCESSED
-
Processing: PROCESSING
-
Held: HELD
-
Processed -> Deleted: PROCESSED+DELETE
-
Unprocessed -> Deleted: UNPROCESSED+DELETE
-
Processing -> Deleted: PROCESSING+DELETE
-
Held -> Deleted: HELD+DELETE
(35) Details of event ID: 00003F13
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of occurrence |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4014-I The event acquisition filter definition file was read. The read definitions will be used for processing from the next received event. (filter name = filter-name, last received event = arrival-time, serial number in event DB = serial-number) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(36) Details of the event ID specified in the SUCCESS_EVENT parameter in the correlation event generation definition file
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
IDBASE |
User-defined event ID (must be in the range from 0 to 1FFF and from 7FFF8000 to 7FFFFFFF) |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
User-defined message |
||
|
Extended attribute |
Common information |
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/GENERATE_EVENT |
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
SUCCESS |
||
|
User-specific or program-spe-cific information |
Relation Event serial number |
JP1_GENERATE_SOURCE_SEQNO |
Serial numbers of related events separated by the space (Δ), as shown below: serial-number-1Δserial-number-2Δ...Δserial-number-n (n: value from 1 to 100) |
|
|
Correlation event generation condition name |
JP1_GENERATE_NAME |
Name of the correlation event generation condition that resulted in approval |
||
Note: You can define as correlation event attributes additional attributes that are not listed in this table. For details, see Correlation event generation definition file in Chapter 2. Definition Files.
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(37) Details of the event ID specified in the FAIL_EVENT parameter in the correlation event generation definition file
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
IDBASE |
User-defined event ID (must be in the range from 0 to 1FFF and from 7FFF8000 to 7FFFFFFF) |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Extended attribute |
Common information |
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/GENERATE_EVENT |
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
FAIL |
||
|
User-specific or program-spe-cific information |
Relation Event serial number |
JP1_GENERATE_SOURCE_SEQNO |
Serial numbers of related events separated by the space (Δ), as shown below: serial-number-1Δserial-number-2Δ...Δserial-number-n (n: value from 1 to 100) |
|
|
Correlation event generation condition name |
JP1_GENERATE_NAME |
Name of the correlation event generation condition that resulted in failure |
||
Note: You can define as correlation event attributes additional attributes that are not listed in this table. For details, see Correlation event generation definition file in Chapter 2. Definition Files.
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(38) Details of event ID: 00003F15
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
3F15 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
Process ID of Automatic Action Service |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1669-I The severe event definition file has been read. Next, processing will be performed using the definition read from the acquired event. (Event acquired at the end:Arrival time = arrival-time-of-the-event-acquired-at-the-end, serial number in event DB = serial-number-in-event-database-of-the-event-acquired-at-the-end)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: If Event Base Service has not received the event, -- is displayed for arrival-time-of-last-event-acquired and for serial-number-of-last-event-acquired.
(39) Details of event ID: 00003F16
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
-1 |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time the error occurred |
||
|
Source user ID |
USERID |
0 |
||
|
Source group ID |
GROUPID |
0 |
||
|
Source user name |
USERNAME |
Blank |
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
0 |
||
|
Message |
MESSAGE |
KAVB1671-W An error occurred in acquiring an event from the integrated monitoring database. Cannot recover the error after attempting the number of retries specified in the system profile. No more events will be displayed from now on due to this error. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
IM Database |
||
|
Occurrence |
OCCURRENCE |
DISCONNECT |
||
(40) Details of event ID: 00003F17
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1150-I An additional common exclusion conditions group was registered. (common exclusion conditions group ID = common-exclusion-conditions-group-ID, common exclude conditions group name = common-exclude-conditions-group-name, registering user = user-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(41) Details of event ID: 00003F20
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the Event Generation Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2179-I The event acquisition filter definition file was read. The read definitions will be used for processing from the next received event. (filter name = filter-name, last received event = arrival-time, serial number in event DB = serial-number-in-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(42) Details of event ID: 00003F21
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the Event Generation Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2242-I The correlation event generation definition file has been read, and the definitions for the correlation event generation function have been updated. (file name = file-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(43) Details of event ID: 00003F22
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server was running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4712-W The event base service cannot use common exclusion condition groups (extended) because a regular expression used by JP1/Base is not extended. The event base service will start without any common exclusion condition groups (extended) being set. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
Notice |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(44) Details of event ID: 00003F23
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2502-W The correlation event issuing service cannot use common exclusion condition groups (extended) because the regular expressions used by JP1/Base are not extended. The correlation event issuing service will start without any common exclusion condition groups (extended) being set. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
Notice |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(45) Details of event ID: 00003F25
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the Event Generation Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2243-I The correlation event generation function has been restarted. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
START |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(46) Details of event ID: 00003F26
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the Event Generation Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2234-I The correlation event generation function has stopped. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
STOP |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(47) Details of event ID: 00003F28
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2322-W A JP1 event (event ID=event-ID, serial number in the event database=serial-number) could not be correlated because the number of correlated JP1 event pairs has reached the upper limit (20,000). |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
Note: JP1 event 00003F28 is output once when the number of JP1 event sets reaches the maximum value. After that, this event is not output again until the number of JP1 event sets drops down to 16,000 or fewer.
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(48) Details of event ID: 00003F31
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the Event Generation Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAJV2188-I An additional common exclusion conditions group was registered. (common exclusion conditions group ID = common-exclusion-conditions-group-ID, common exclude conditions group name = common-exclude-conditions-group-name, registering user = user-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EGS |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EGS |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(49) Details of event ID: 00003F41
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of occurrence |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB0551-E The number of accumulated response-waiting events on the manager exceeded the maximum (2000). |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(50) Details of event ID: 00003F42
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Serial number |
SEQNO |
Serial number |
|
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of occurrence |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1816-W A response-waiting event could not be displayed. To search for the event, specify the search conditions in the dialog box for setting the event search conditions as follows: (1) As the host to be searched for, specify the name of the connected host. (2) As the response-waiting event, specify the target event. (3) As the arrival timeframe, specify the times when the events before and after this event arrived. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
PROCESS |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(51) Details of event ID: 00003F51
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F51 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1841-I The events from deletion-target-start-date-and-time to deletion-target-end-date-and-time were deleted from the integrated monitoring database.#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Deletion start date |
DEL_STARTDAY |
Deletion start date, expressed as absolute time in seconds (displayed in the Event Details window in the format MM/DD hh:mm:ss) |
|
|
Deletion end date |
DEL_ENDDAY |
Deletion end date, expressed as absolute time in seconds (displayed in the Event Details window in the format MM/DD hh:mm:ss) |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The format of deletion-start-date and deletion-end-date is replaced in the KAVB1841-I message with YYYY/MM/DD hh:mm:ss.
(52) Details of event ID: 00003F52
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F52 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1842-W Events not output for preservation have exceeded the deletion warning level (deletion-warning-level%). |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(53) Details of event ID: 00003F53
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Source host |
SOURCESERVER |
Name of the event-issuing server |
|
|
Message |
MESSAGE |
KAVB1832-E An error occur while attempting to register an event into the integrated monitoring database. The system will retry registering the event. (detailed information = detailed-information) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
(54) Details of event ID: 00003F54
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Source host |
SOURCESERVER |
Name of the event-issuing server |
|
|
Message |
MESSAGE |
KAVB1833-I An error occur while attempting to register an event into the integrated monitoring database. However, after several retries, the event was registered into the database. The event base service is restarting event acquisition. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
(55) Details of event ID: 00003F56
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F56 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4673-I A repeated event condition was registered. (repeated event condition name = repeated-event-condition-name, registering user = user-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(56) Details of event ID: 00003F57
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F57 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4674-I The definition file for the repeated event condition was updated. Next, processing will be performed using the definition read from the received event. (arrival time of the last received event = arrival-time-of-the-last-received-event, serial number in the event database = serial-number-in-the-event-database) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(57) Details of event ID: 00003F58
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F58 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4676-I Suppression of repeated events that match the repeated event condition (repeated-event-condition-name) has started. (arrival time of the first suppressed event = arrival-time-of-the-first-suppressed-event, event database serial number of the first suppressed event = event-database-serial-number-of-the-first-suppressed-event) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Duplicate attribute value information 1 |
SAMEATTR1 |
Stores the first (listed at the top) attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If a duplicate attribute value condition is not specified, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
|
|
Duplicate attribute value information 2 |
SAMEATTR2 |
Stores the second attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there are fewer than two duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
|
Duplicate attribute value information 3 |
SAMEATTR3 |
Stores the third attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there are fewer than three duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(58) Details of event ID: 00003F59
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F59 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4677-I Suppression of repeated events that match the repeated event condition (repeated-event-condition-name) has ended. (arrival time of the suppressed event = arrival-time-of-the-first-suppressed-event(YYYY/MM/DD HH:MM:SS) - arrival-time-of-the-last-suppressed-event(YYYY/MM/DD HH:MM:SS), event database serial number of the suppressed event = event-database-serial-number-of-the-first-suppressed-event - event-database-serial-number-of-the-last-suppressed-event) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Duplicate attribute value information 1 |
SAMEATTR1 |
Stores the first (listed at the top) attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If a duplicate attribute value condition is not specified, a blank is stored. You can specify maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
|
|
Duplicate attribute value information 2 |
SAMEATTR2 |
Stores the second attribute name and its value as a duplicate attribute value conditions in attribute-name=attribute-value format. If there are fewer than two duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
|
Duplicate attribute value information 3 |
SAMEATTR3 |
Stores the third attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there are fewer than three duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(59) Details of event ID: 00003F60
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F60 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or the logical host where the event base server is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4678-I Suppression of repeated events that match the repeated event condition (repeated-event-condition-name) has terminated. (arrival time of the suppressed event = arrival-time-of-the-first-suppressed-event(YYYY/MM/DD HH:MM:SS) - arrival-time-of-the-last-suppressed-event(YYYY/MM/DD HH:MM:SS), event database serial number of the suppressed event = event-database-serial-number-of-the-first-suppressed-event - event-database-serial-number-of-the-last-suppressed-event) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Duplicate attribute value information 1 |
SAMEATTR1 |
Stores the first (listed at the top) attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If a duplicate attribute value condition is not specified, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
|
|
Duplicate attribute value information 2 |
SAMEATTR2 |
Stores the second attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there is only one duplicate attribute value condition, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
|
Duplicate attribute value information 3 |
SAMEATTR3 |
Stores the third attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there are fewer than three duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(60) Details of event ID: 00003F61
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F61 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4600-I The severity change definition has been read. Next, processing will be performed using the definition read from the received event. (arrival time of the last received event = arrival-time, serial number in the event database = serial-number-in-event-database)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The format of arrival-time is replaced in the KAVB4600-I message with YYYY/MM/DD hh:mm:ss. The time set in arrival-time is based on the time zone set in the machine where JP1/IM - Manager is running.
(61) Details of event ID: 00003F63
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F63 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where the Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4650-I An event-source-host mapping definition was read. Processing will be performed by the definition read from the next received event. (last received event: reception time = reception-time, event database serial number = event-database-serial-number)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The format of arrival-time is replaced in the KAVB4650-I message with YYYY/MM/DD hh:mm:ss. The time set in arrival-time is based on the time zone set in the machine where JP1/IM - Manager is running.
(62) Details of event ID: 00003F64
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F64 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65,535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or logical host where the Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8453-I The business group was updated. Processing will be performed from the next-received event. (last received event: reception time = reception-time, event database serial number = event-database-serial-number)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The format of arrival-time is replaced in the KAVB8453-I message with YYYY/MM/DD hh:mm:ss. The time set in arrival-time is based on the time zone set in the machine where JP1/IM - Manager is running.
(63) Details of event ID: 00003F65
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F65 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrived time |
||
|
Source user ID |
USERID |
-1 to 65,535# |
||
|
Source group ID |
GROUPID |
-1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the host or logical host where the Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4679-I Suppression of repeated events that match the repeated event condition (repeated-event-condition-name) will continue. (arrival time of the suppressed event = arrival-time-of-the-first-suppressed-event(YYYY/MM/DD HH:MM:SS) - arrival-time-of-the-last-suppressed-event(YYYY/MM/DD HH:MM:SS), event database serial number of the suppressed event = event-database-serial-number-of-the-first-suppressed-event - event-database-serial-number-of-the-last-suppressed-event) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Notice |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Duplicate attribute value information 1 |
SAMEATTR1 |
Stores the first (listed at the top) attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If a duplicate attribute value condition is not specified, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
|
|
Duplicate attribute value information 2 |
SAMEATTR2 |
Stores the second attribute name and its value as a duplicate attribute value conditions in attribute-name=attribute-value format. If there are fewer than two duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
|
Duplicate attribute value information 3 |
SAMEATTR3 |
Stores the third attribute name and its value as a duplicate attribute value condition in attribute-name=attribute-value format. If there are fewer than three duplicate attribute value conditions, a blank is stored. You can specify a maximum of 1,024 bytes for the attribute value. For a value larger than 1,024 bytes, split it, but do so without splitting a multi-byte character. |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(64) Details of event ID: 00003F68
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F68 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where the Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8454-W The business group could not be updated. (cause = cause) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(65) Details of event ID: 00003F69
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F69 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65,535# |
||
|
Source group ID |
GROUPID |
From -1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB8456-E The business group could not be updated. (cause = cause) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(66) Details of event ID: 00003F6A
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F6A |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4623-I The display message change definition has been read. Next, processing will be performed using the definition read from the received event. (arrival time of the last received event = arrival-time, serial number in the event database = event-database-serial-number)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#1: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
#2: The format of arrival-time is replaced in the KAVB4623-I message with YYYY/MM/DD hh:mm:ss. The time set in arrival-time is based on the time zone set in the machine where JP1/IM - Manager is running.
(67) Details of event ID: 00003F71
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F71 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
-1 to 65,535# |
||
|
Source group ID |
GROUPID |
-1 to 65,535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4802-I A severity change definition was registered. (severity change definition name = severity-change-definition-name, registering user = user-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(68) Details of event ID: 00003F76
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F76 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65535# |
||
|
Source group ID |
GROUPID |
From -1 to 65535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Base Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB4803-I A display message change definition was registered. (display message change definition name = display-message-change-definition-name, registering user = user-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVFLOW |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVFLOW |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(69) Details of event ID: 00003F77
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F77 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65535# |
||
|
Source group ID |
GROUPID |
From -1 to 65535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Console Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB5800-I The definition file for extended event attributes was read in to JP1/IM - Manager. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(70) Details of event ID: 00003F78
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F78 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65535# |
||
|
Source group ID |
GROUPID |
From -1 to 65535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Console Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB5804-E An attempt to read the definition file for extended event attributes failed because part of the definition file for extended event attributes could not be read. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(71) Details of event ID: 00003F7C
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00003F7C |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
From -1 to 65535# |
||
|
Source group ID |
GROUPID |
From -1 to 65535# |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
Blank |
||
|
Event-issuing server name |
SOURCESERVER |
Name of the server or logical host where Event Console Service is running |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB1981-I The definition file for opening monitor windows was applied to JP1/IM - Manager. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/EVENTCONSOLE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
EVTCON |
||
|
Occurrence |
OCCURRENCE |
RUN |
||
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(72) Details of event ID: 00003FB0
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
|
|
Message |
MESSAGE |
KAVB7900-I Status of monitoring-node-name is changed status from status. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/SCOPE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
IM_CS |
||
|
Occurrence |
OCCURRENCE |
STATUS_CHANGE |
||
|
User-specific or program-spe-cific information |
Monitoring node ID |
MON_NODE_ID |
ID of the monitoring node |
|
|
Monitoring node name |
MON_NODE_NAME |
Name of the monitoring node |
||
|
Monitoring node status#1 |
MON_NODE_STATUS |
StatusID of the monitoring node |
||
|
Information about the JP1 event resulting in the status change#2 |
attributes |
Attributes (the name of a basic attribute is prefixed with JCS_B_, and the name of an extended attribute is prefixed with JCS_E_) |
||
#1: For the monitoring node status (E.MON_NODE_STATUS), the status of the monitoring node that issued the JP1 event is stored in StatusID, expressed as a numeric value as shown below:
- Value of StatusID (monitoring node status):
-
Emergency: 800; Alert: 700; Critical: 600; Error: 500; Warning: 400; Normal: 300; Debug: 200; Initial: 100
For example, if a JP1 event is issued when the monitoring node status has changed to Emergency, its monitoring node status (E.MON_NODE_STATUS) would be 800.
#2: The item Information about the JP1 event resulting in the status change cannot be checked by JP1/IM - View. All information about the JP1 event resulting in the status change is stored in this item as sets of attribute-name-attribute-value. If 00003FB0 exceeds the maximum length for a JP1 event (10,000 bytes), JP1/IM stores as much JP1 event information as fits. If the number of extended attributes exceeds 100, JP1/IM stores as much JP1 event information as fits, but no more than 100 extended attributes. The attributes E.JCS_B_TIME (registration time of the JP1 event resulting in the status change) and E.JCS_B_ARRIVEDTIME (arrival time of the JP1 event resulting in the status change) are stored in this item in GMT in the format YYYY/MM/DD hh:mm:ss.
(73) Details of event ID: 00003FB1
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
|
|
Event ID |
-- |
00003FB1 |
||
|
Message |
MESSAGE |
KAVB7901-W The number of status change event for the monitored node monitoring-node-ID# has reached the threshold. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
WARNING |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/SCOPE |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
IM_CS |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-spe-cific information |
Monitoring node ID |
MON_NODE_ID |
ID of the monitoring node |
|
|
Number of status change events |
EVHIST_NUMBER |
Number of status change events |
||
- Legend:
-
--: None
#: Only one JP1 event with event ID 00003FB1 is issued even if a single JP1 event triggered more than 100 status change events from multiple monitoring objects. A maximum of 10 monitoring object IDs can be listed in monitoring-node-ID in the message, separated by the comma. If there are more than 10 monitoring object IDs, ... is displayed following the last listed ID.
(74) Details of event ID: 00003FC0
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC0 |
|
|
Message |
MESSAGE |
KNAN26102-E The remote log-file trap cannot start. (Code: code, Host name: host name, Monitoring-target-name: monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitoring stop time |
WATCH_STOP_TIME |
Time that log file monitoring stopped (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(75) Details of event ID: 00003FC1
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC1 |
|
|
Message |
MESSAGE |
KNAN26094-E The relevant log file could not be read after the specified number of retires, so monitoring will stop. (Code: code, Host name: host-name, Monitoring-target-name: monitoring-target-name, Log file name: Log file name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitoring stop time |
WATCH_STOP_TIME |
Time that log file monitoring stopped (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(76) Details of event ID: 00003FC2
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC2 |
|
|
Message |
MESSAGE |
KNAN26095-E The relevant log file can no longer be monitored. (Code: code, Host name: host-name, Monitoring-target-name: monitoring-target-name, Log file name: Log file name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Time an abnormality detected |
WATCH_CHECK_TIME |
Time that a log file error was detected (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(77) Details of event ID: 00003FC3
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC3 |
|
|
Message |
MESSAGE |
KNAN26057-E The remote log-file trap will stop due to error. (Code: code, Host name: host name, Monitoring-target-name: monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Time an abnormality detected |
WATCH_CHECK_TIME |
Time that a log file error was detected (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(78) Details of event ID: 00003FC5
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC5 |
|
|
Message |
MESSAGE |
KNAN26140-W The amount of data that a remote log file trap collected from the log file exceeded the limit. The log entries output from the last collection time to this collection time will not be output as JP1 events. (host name: host name, monitoring-target name: monitoring-target-name, log file name: Log file name, previous collection time: Last collection time(yyyy/MM/dd hh:mm:ss), this collection time: This collection time(yyyy/MM/dd hh:mm:ss)) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(79) Details of event ID: 00003FC6
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC6 |
|
|
Message |
MESSAGE |
KNAN26351-E All trapping of remote log files on monitored host "monitored-host-name" will now stop. (cause = cause) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
In Windows: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitoring stop time |
WATCH_STOP_TIME |
Time that log file monitoring stopped (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(80) Details of event ID: 00003FC7
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC7 |
|
|
Message |
MESSAGE |
KNAN26350-W The backup files for the monitored log files were not found. The log entries output to the backup files between the previous collection time and the current collection time will not be output as JP1 events. (host name = monitored-host-name, monitoring target = monitoring-target-name, log file name = monitored-log-file-name, previous collection time = yyyy/MM/dd hh:mm:ss, current collection time = yyyy/MM/dd hh:mm:ss, user = user, command line that was executed = command-line-executed) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(81) Details of event ID: 00003FC8
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC8 |
|
|
Message |
MESSAGE |
KNAN26352-W The backup files for the monitored log files were not found. The log entries output to the backup files between the previous collection time and the current collection time will not be output as JP1 events. (host name = monitored-host-name, monitoring target = monitoring-target-name, log file name = monitored-log-file-name, last collection time = yyyy/MM/dd hh:mm:ss, current collection time = yyyy/MM/dd hh:mm:ss, user = user) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: When the -p option of the jcfallogstart command is specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the log data output source program name specified by the -p option of the jevlogstart command. When the -p option of the jcfallogstart command is not specified: /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(82) Details of event ID: 00003FC9
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FC9 |
|
|
Message |
MESSAGE |
KNAN26353-E Trapping of remote event log files on monitored host "monitored-host-name" will now stop. (cause = cause) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitoring stop time |
WATCH_STOP_TIME |
Time that log file monitoring stopped (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(83) Details of event ID: 00003FD0
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD0 |
|
|
Message |
MESSAGE |
KNAN26107-E The remote event-log trap cannot start. (Code: code, Host name: host name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Error detection time |
ERROR_TIME |
Time that the error occurred (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
API where error occurred |
ERROR_FUNCTION |
Name of the Windows API where the error occurred |
||
|
Cause of error |
ERROR_CAUSE_ID |
Error cause code |
||
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(84) Details of event ID: 00003FD1
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD1 |
|
|
Message |
MESSAGE |
KNAN26028-E Monitoring will now stop because the event log could not be read after the specified number of retries. (Code: code, Host name: host name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Error detection time |
ERROR_TIME |
Time that the error occurred (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
API where error occurred |
ERROR_FUNCTION |
Name of the Windows API where the error occurred |
||
|
Cause of error |
ERROR_CAUSE_ID |
Error cause code |
||
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(85) Details of event ID: 00003FD2
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD2 |
|
|
Message |
MESSAGE |
KNAN26027-I The system will now retry reading the event log. (Code: code, Host name: host name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Error detection time |
ERROR_TIME |
Time that the error occurred (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
API where error occurred |
ERROR_FUNCTION |
Name of the Windows API where the error occurred |
||
|
Cause of error |
ERROR_CAUSE_ID |
Error cause code |
||
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(86) Details of event ID: 00003FD3
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD3 |
|
|
Message |
MESSAGE |
KNAN26002-E The remote event-log trap will now stop due to error. (Code: code, Host name: host name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Error detection time |
ERROR_TIME |
Time that the error occurred (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Cause of error |
ERROR_CAUSE_ID |
Error cause code |
||
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(87) Details of event ID: 00003FD4
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD4 |
|
|
Message |
MESSAGE |
KNAN26026-I An event log can now be monitored. (Host name: host name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Error detection time |
ERROR_TIME |
Time that the error occurred (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Error recovery time |
RECOVER_TIME |
Time that the program was recovered after the error (absolute time in seconds since UTC 1970-01-01 00:00:00) |
||
|
Cause of error |
ERROR_CAUSE_ID |
Error cause code |
||
|
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
||
- Legend:
-
--: None
(88) Details of event ID: 00003FD5
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD5 |
|
|
Message |
MESSAGE |
KNAN26142-W The amount of data that a remote event-log trap collected from the host exceeded the limit. The event-log entries output from the last collection time to this collection time will not be output as JP1 events. (host name = host name,previous collection time = Last collection time(yyyy/MM/dd hh:mm:ss),this collection time = This collection time(yyyy/MM/dd hh:mm:ss)) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(89) Details of event ID: 00003FD6
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD6 |
|
|
Message |
MESSAGE |
KNAN26339-W Failed to save the state of the remote log file trap when the log was collected. (host name = monitored-host-name, monitoring target = monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring target name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(90) Details of event ID: 00003FD7
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD7 |
|
|
Message |
MESSAGE |
KNAN26340-W Failed to save the state of the remote event log trap when the log was collected. (host name = monitored-host-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(91) Details of event ID: 00003FD8
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD8 |
|
|
Message |
MESSAGE |
KNAN26341-W Failed to restore the remote log file trap to its state when it was last terminated. (host name = monitored-host-name, monitoring target = monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring target name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(92) Details of event ID: 00003FD9
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FD9 |
|
|
Message |
MESSAGE |
KNAN26342-W Failed to restore the remote log file trap to its state when it was last terminated. (host name = monitored-host-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(93) Details of event ID: 00003FDA
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FDA |
|
|
Message |
MESSAGE |
KNAN26343-W The remote log file trap was not restored to its state when it was last terminated, because the trap was in a state where it could not be monitored. (details = detailed-information, host name = monitored-host-name, monitoring target = monitoring-target-name, log file name = log-file-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
In Windows: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring target name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(94) Details of event ID: 00003FDB
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FDB |
|
|
Message |
MESSAGE |
KNAN26345-I An error in the processing to save the state of the remote log file trap that occurred during log collection was resolved. (host name = monitored-host-name, monitoring target = monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
In Windows: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP/program-name, where program-name is the name of the program that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_NT_LOGTRAP In UNIX: (When the -p option of the jcfallogstart command is specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP/program-name, where program-name is the name of the program name that output the log data and that is specified for the -p option of the jevlogstart command (When the -p option of the jcfallogstart command is not specified) /HITACHI/JP1/IM/REMOTE_UX_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitoring target name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitoring target name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(95) Details of event ID: 00003FDC
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FDC |
|
|
Message |
MESSAGE |
KNAN26346-I An error in the processing to save the state of the remote event log trap that occurred during log collection was resolved. (host name = monitored-host-name, monitoring target = monitoring-target-name) |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/REMOTE_NTEVENT_LOGTRAP |
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Monitored host name |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Monitored host name |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
|
User-specific or program-specific information |
Monitored host name |
JP1_SOURCEHOST |
Monitored host name |
|
- Legend:
-
--: None
(96) Event ID: Value specified for the ACTDEF parameter of the remote monitoring log file trap definition file
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
The value specified for the ACTDEF parameter |
|
|
Message |
MESSAGE |
Data content of one line in a log file |
||
|
Event issuing time |
-- |
Time that the event was issued |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Severity specified by the ACTDEF parameter in the action definition file |
|
Product name |
PRODUCT_NAME |
In Windows:
In UNIX:
|
||
|
Object type |
OBJECT_TYPE |
LOGFILE |
||
|
Object name |
OBJECT_NAME |
Name of log file to be monitored |
||
|
Root object type |
ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Name of log file to be monitored |
||
|
User-specific or program-specific information |
Platform |
PLATFORM |
In Windows: NT In UNIX: UNIX |
|
|
PP name |
PPNAME |
/HITACHI/JP1/IM/REMOTE_MONITORING/LOGTRAP |
||
|
Host name |
JP1_SOURCEHOST |
Event source host name (Monitored host name) |
||
|
Monitoring ID |
E.JP1_TRAP_ID# |
ID number of a log file trap |
||
|
Monitoring name |
E.JP1_TRAP_NAME# |
Monitoring name |
||
- Legend:
-
--: None
#: An attribute that exists when the JP1/Base version of Manager is 10-50 or later.
(97) Details of event ID: 00003A71, or the event ID specified in the filter block of the remote-monitoring event log trap action-definition file
|
Attribute type |
Item |
Attribute name (WMI attribute name) |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
B.ID |
Event ID specified in the filter block of the remote-monitoring event log trap action-definition file. If no event ID is specified, the value is set to 00003A71. |
|
|
Message |
B.MESSAGE (Message or InsertionStrings) |
Event log message.#1 A maximum of 1,023 bytes. If the limit is exceeded, the excess bytes are discarded. |
||
|
Event issuing time |
-- |
Time that the event was issued |
||
|
Extended attribute |
Common information |
Event level |
E.SEVERITY (EventType) |
Registration is according to the event log type: Error: Error Warning: Warning Information: Information, details, and other types of information Notice: Successful audit, failed audit |
|
Event source product name |
E.PRODUCT_NAME (SourceName) |
/HITACHI/JP1/NTEVENT_LOGTRAP/source |
||
|
Object type |
E.OBJECT_TYPE E.ROOT_OBJECT_TYPE |
LOGFILE |
||
|
Object name |
E.OBJECT_NAME E.ROOT_OBJECT_NAME |
NTEVENTLOG |
||
|
User-specific or program-specific information |
Event log registration date and time |
E.A0 (TimeGenerated) |
time_t type (absolute time in seconds since UTC 1970-01-01 00:00:00) |
|
|
Computer name |
E.A1 (ComputerName) |
|
||
|
Type |
E.A2 (Logfile) |
Value indicating the event log type |
||
|
Type |
E.A3 (Type) |
Value corresponding to the event log level |
||
|
Category |
E.A4 (CategoryString or Category) |
Value for the event log task category |
||
|
Event ID |
E.A5 (EventCode) |
Value for the event log event ID |
||
|
User name |
E.A6 (User) |
Value for the event log user name |
||
|
Platform |
E.PLATFORM |
NT |
||
|
PP name |
E.PPNAME |
/HITACHI/JP1/IM/AGENTLESS/EVENTLOGTRAP |
||
|
Event source host name |
E.JP1_SOURCEHOST#2 |
Monitored host name |
||
|
Log file trap name |
E.JP1_TRAP_NAME |
Log file trap name specified in the remote-monitoring event log trap action-definition file. Not output if unspecified (attribute does not exist). |
||
- Legend:
-
--: None
#1: If the message DLL in which the description of an event log is coded is not set correctly, the inserted phrase or the detail code is enclosed in double-quotation marks (") to register it in a JP1 event message.
#2: An attribute that exists only when the common definition (ATTR_EVENT_LOGTRAP_SOURCEHOST) is 1.
(98) Details of event ID: 00003F90
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003F90 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
Process ID of jco_spmd |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB3737-E The component-name managed-process-name terminated abnormally. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/SPMD |
||
|
Object type |
OBJECT_TYPE |
SPMD |
||
|
Object name |
OBJECT_NAME |
Name of the process that terminated abnormally |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(99) Details of event ID: 00003F91
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003F91 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
Process ID of jco_spmd |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB3613-W A component-name timeout occurred in managed-process-name. Processing continues. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Warning |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/SPMD |
||
|
Object type |
OBJECT_TYPE |
SPMD |
||
|
Object name |
OBJECT_NAME |
Name of the process resulting in a start timeout |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(100) Details of event ID: 00003F92
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003F92 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
Process ID of jco_spmd |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
MESSAGE |
KAVB3616-I Restart of the component-name managed-process-name has finished. |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/SPMD |
||
|
Object type |
OBJECT_TYPE |
SPMD |
||
|
Object name |
OBJECT_NAME |
Name of the process that was restarted |
||
|
Occurrence |
OCCURRENCE |
NOTICE |
||
- Legend:
-
--: None
#: The substitute user ID and substitute group ID specified in the event server settings file of JP1/Base are set. If they are not specified, -1 is set.
(101) Details of event ID: 00006400
|
Attribute type |
Item |
Attribute name |
Description |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
ID |
00006400 |
|
|
Serial number |
SEQNO |
Serial number# |
||
|
Reason for registration |
REASON |
Value from 1 to 4# |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Registered time# |
||
|
Arrived time |
ARRIVEDTIME |
Arrival time# |
||
|
Source user ID |
USERID |
|
||
|
Source group ID |
GROUPID |
|
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Event-issuing server name# |
||
|
Target event server name |
DESTSERVER |
Target event server name# |
||
|
Source IP address |
EVIPADDR |
Event source IP address#
|
||
|
Destination IP address |
-- |
Event destination IP address# |
||
|
Source serial number |
SOURCESEQNO |
Source serial number# |
||
|
Code set |
-- |
Language code that JP1/IM - Manager is using# |
||
|
Message |
MESSAGE |
If the message was changed by the display message change function, the changed message is set. If the message was not changed, the message text of the original event is set. |
||
|
Detailed information |
-- |
Not set |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
If the event level of the original event was changed by the severity changing function, the changed event level is set. If the event level was not changed, the original event's event level is set. |
|
User name |
USER_NAME |
Original event's USER_NAME |
||
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/MO |
||
|
Object type |
OBJECT_TYPE |
Original event's OBJECT_TYPE |
||
|
Object name |
OBJECT_NAME |
Original event's OBJECT_NAME |
||
|
Root object type |
ROOT_OBJECT_TYPE |
Original event's ROOT_OBJECT_TYPE |
||
|
Root object name |
ROOT_OBJECT_NAME |
Original event's ROOT_OBJECT_NAME |
||
|
Object ID |
OBJECT_ID |
Original event's OBJECT_ID |
||
|
Occurrence |
OCCURRENCE |
Original event's OCCURRENCE |
||
|
Start time |
START_TIME |
Original event's START_TIME |
||
|
End time |
END_TIME |
Original event's END_TIME |
||
|
Return code |
RESULT_CODE |
Original event's RESULT_CODE |
||
|
Basic attribute of original event |
Serial number |
B_SEQNO |
Original event's serial number |
|
|
Event ID |
B_ID |
Original event's event ID. The format is basic-code:extended-code. The basic code and extended code are hexadecimal values of up to 8 digits with no leading zeros. |
||
|
Reason for registration |
B_REASON |
Original event's reason for registration |
||
|
Source process ID |
B_PID |
Original event's source process ID |
||
|
Registered time |
B_DATE |
Sets the date portion of the original event's registered date and time in the format YYYY/MM/DD. The result is a character string that has been converted to the server's time zone. |
||
|
B_TIME |
Sets the time portion of the original event's registered date and time in the format hh:mm:ss. The result is a character string that has been converted to the server's time zone. |
|||
|
Arrived time |
B_ARVDATE |
Sets the date portion of the original event's arrival date and time in the format YYYY/MM/DD. The result is a character string that has been converted to the server's time zone. |
||
|
B_ARVTIME |
Sets the time portion of the original event's arrival date and time in the format hh:mm:ss. The result is a character string that has been converted to the server's time zone. |
|||
|
Source user ID |
B_USRID |
Original event's source user ID |
||
|
Source group ID |
B_GRPID |
Original event's source group ID |
||
|
Source user name |
B_USR |
Original event's source user name |
||
|
Source group name |
B_GRP |
Original event's source group name |
||
|
Event-issuing server name |
B_HOST |
Original event's event-issuing server name |
||
|
Destination event server name |
B_DESTSERVER |
Original event's destination event server name |
||
|
Source IP address |
B_IPADDR |
Original event's source IP address |
||
|
Destination IP address |
B_DESTIPADDR |
Original event's destination IP address |
||
|
Sequence number by source |
B_SRCNO |
Original event's sequence number by source |
||
|
Code set |
B_CODESET |
Original event's code set |
||
|
Message |
B_MSG |
Original event's message |
||
|
Detailed information |
B_DETAIL |
Original event's detailed information
|
||
|
Extended attribute of original event: Common information |
Event level |
E_SEVERITY |
Original event's SEVERITY (if the event level was changed by the severity changing function, the changed event level is set) |
|
|
Product name |
E_PRODUCT_NAME |
Original event's PRODUCT_NAME |
||
|
Extended attribute of original event: Program-specific information |
Extended attribute of original event: Program-specific information |
E_* |
The original event's extended attribute program-specific information is set. These are items with E_ prefixed to the original event's attribute name. For example, if the original event's extended attribute name is PLATFORM and the content is NT, the event's attribute name after conversion will be E_PLATFORM, and the content will still be NT. However, if the original event's extended attribute name is 31 bytes long or greater, the E_ will be omitted from the converted event attribute name. |
|
|
JP1/IM - M program-specific information |
Event source information |
EVTSRC_INFO |
|
|
|
JP1/IM - MO version |
MO_VERSION |
1100 |
||
|
Event source name |
EVTSRC_NAME |
|
||
|
Target system name |
SYSTEM_NAME |
|
||
|
Extended attribute storage result |
ADDEXTATTR_RESULT |
The extended attributes' storage result is set. The sum of the following values is set as a two-byte hexadecimal value.
|
||
- Legend:
-
--: None
#: Set by JP1/Base.
Note: Original event refers to the event that JP1/IM - Manager acquired from JP1/Base.
(102) Details of event ID: 00003FE0
|
Attribute type |
Item |
Attribute name |
Attribute value |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FE0 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time of arrival |
||
|
Source user ID |
USERID |
From -1 to 65535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Name of the event-issuing server |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
-- |
KAJY22023-I The response action will now start. (suggestion ID : suggestion-ID, JP1 user name : JP1-user-name, IM management node : tree-SID, action information : action-information)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/DD |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
SUGGESTION |
||
|
Occurrence |
OCCURRENCE |
START |
||
|
User-specific or program-specific information |
Suggestion ID |
SUGGESTION_ID |
Suggestion ID of the response action |
|
|
Tree SID |
TREE_SID |
Tree SID of the response action#3 |
||
- Legend:
-
--: None
#1: The substitute user ID and substitute group ID specified in the event server settings file are set. If they are not specified, -1 is set.
#2: If the message exceeds 1,024 bytes, only the characters up to 1,023 bytes are set. If the 1,023rd byte happens to constitute part of a multi-byte character, the message is set with that multi-byte character and the subsequent characters discarded.
#3: If the total size of the extended attributes exceeds 10,000 bytes, the value of this attribute is truncated to make the total size 10,000 bytes, with the last three bytes converted to an ellipsis (...).
(103) Details of event ID: 00003FE1
|
Attribute type |
Item |
Attribute name |
Attribute value |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FE1 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time of arrival |
||
|
Source user ID |
USERID |
From -1 to 65535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Event-issuing server name |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
-- |
KAJY22024-I The response action has finished. (suggestion ID : suggestion-ID, JP1 user name : JP1-user-name, IM management node : tree-SID, action information : action-information)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Information |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/DD |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
SUGGESTION |
||
|
Occurrence |
OCCURRENCE |
END |
||
|
User-specific or program-specific information |
Suggestion ID |
SUGGESTION_ID |
Suggestion ID of the response action |
|
|
Tree SID |
TREE_SID |
Tree SID of the response action#3 |
||
- Legend:
-
--: None
#1: The substitute user ID and substitute group ID specified in the event server settings file are set. If they are not specified, -1 is set.
#2: If the message exceeds 1,024 bytes, only the characters up to 1,023 bytes are set. If the 1,023rd byte happens to constitute part of a multi-byte character, the message is set with that multi-byte character and the subsequent characters discarded.
#3: If the total size of the extended attributes exceeds 10,000 bytes, the value of this attribute is truncated to make the total size 10,000 bytes, with the last three bytes converted to an ellipsis (...).
(104) Details of event ID: 00003FE2
|
Attribute type |
Item |
Attribute name |
Attribute value |
|
|---|---|---|---|---|
|
Basic attribute |
Event ID |
-- |
00003FE2 |
|
|
Serial number |
SEQNO |
Serial number |
||
|
Source process ID |
PROCESSID |
0 |
||
|
Registered time |
TIME |
Time of registration |
||
|
Arrived time |
ARRIVEDTIME |
Time of arrival |
||
|
Source user ID |
USERID |
From -1 to 65535#1 |
||
|
Source group ID |
GROUPID |
From -1 to 65535#1 |
||
|
Source user name |
USERNAME |
|
||
|
Source group name |
GROUPNAME |
|
||
|
Event-issuing server name |
SOURCESERVER |
Event-issuing server name |
||
|
Source serial number |
SOURCESEQNO |
Source serial number |
||
|
Message |
-- |
KAJY22025-E Execution of the response action failed. (suggestion ID : suggestion-ID, JP1 user name : JP1-user-name, cause : cause, IM management node : tree-SID, action information : action-information)#2 |
||
|
Extended attribute |
Common information |
Event level |
SEVERITY |
Error |
|
Product name |
PRODUCT_NAME |
/HITACHI/JP1/IM/DD |
||
|
Object type |
OBJECT_TYPE |
SERVICE |
||
|
Object name |
OBJECT_NAME |
SUGGESTION |
||
|
Occurrence |
OCCURRENCE |
ERROR |
||
|
User-specific or program-specific information |
Suggestion ID |
SUGGESTION_ID |
Suggestion ID of the response action |
|
|
Tree SID |
TREE_SID |
Tree SID of the response action#3 |
||
- Legend:
-
--: None
#1: The substitute user ID and substitute group ID specified in the event server settings file are set. If they are not specified, -1 is set.
#2: If the message exceeds 1,024 bytes, only the characters up to 1,023 bytes are set. If the 1,023rd byte happens to constitute part of a multi-byte character, the message is set with that multi-byte character and the subsequent characters discarded.
#3: If the total size of the extended attributes exceeds 10,000 bytes, the value of this attribute is truncated to make the total size 10,000 bytes, with the last three bytes converted to an ellipsis (...).