Lists of commands
This section lists the names of the commands that can be used in JP1/IM and the permissions required to execute these commands. Note that the commands are described in alphabetical order from the next section.
- Organization of this page
-
-
Commands related to IM Configuration Management (remote monitoring configuration)
-
Commands related to the Intelligent Integrated Management Base
-
Commands related to changing the monitoring node status in Central Scope
-
Commands for migrating monitoring object database information in Central Scope
-
Commands for checking the contents of the JP1/IM - Manager definition file
-
Commands for checking the contents of the JP1/IM - View definition file
-
Command that counts the number of nodes managed by JP1/IM - Manager
Legend and notes for tables
Whether a command is supported in the Windows and UNIX environments is indicated in the tables by the following notations and notes:
- Legend:
-
Y: Supported
--: Not supported
- #1
-
In Windows, a superuser means a user with Administrator permissions.
- #2
-
This is a JP1/Base command (related to configuration definition and command execution) for the manager. For details about the command, see the chapter that describes commands in the JP1/Base User's Guide.
- #3
-
In Windows, Administrator permissions are required. (If the Windows UAC feature is enabled, the command must be executed from the administrator console.)
Commands related to startup, termination, and setup
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Sets up JP1/IM - Manager (Central Console) |
-- |
Y |
Superuser |
|
Sets up JP1/IM - Manager (Central Scope) |
-- |
Y |
Superuser |
|
Starts JP1/IM - Manager automatically |
-- |
Y |
Superuser |
|
Terminates JP1/IM - Manager automatically |
-- |
Y |
Superuser |
|
Displays the status of JP1/IM - Manager processes |
Y |
Y |
Superuser#1 |
|
Updates the status of JP1/IM - Manager processes |
Y |
Y |
Superuser#1 |
|
Specifies settings required for operation in a cluster system |
Y |
-- |
Superuser#1 |
|
Y |
-- |
Superuser#1 |
||
-- |
Y |
Superuser |
||
-- |
Y |
Superuser |
||
Starts JP1/IM - Manager in a cluster system |
-- |
Y |
Superuser |
|
Terminates JP1/IM - Manager in a cluster system |
-- |
Y |
Superuser |
|
Forcibly terminates JP1/IM - Manager in a cluster system |
-- |
Y |
Superuser |
|
Specifies dependencies between JP1/IM-Manager Service and the JP1/Base Event service |
Y |
-- |
Superuser#1 |
Commands related to IM databases
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Sets up the IM Configuration Management database for storing configuration information |
Y |
Y |
Superuser#1 |
|
Cancels setup of the IM Configuration Management database that stores configuration information |
Y |
Y |
Superuser#1 |
|
Sets up an integrated monitoring database for storing JP1 events |
Y |
Y |
Superuser#1 |
|
Cancels setup of the integrated monitoring database that stores JP1 events |
Y |
Y |
Superuser#1 |
|
Outputs to a CSV file JP1 event information registered in the integrated monitoring database |
Y |
Y |
Superuser#1 |
|
Backs up the IM database |
Y |
Y |
Superuser#1 |
|
Releases free area (free page area) in the IM Configuration Management database |
Y |
Y |
Superuser#1 |
|
Restores (recovers) a database from a backup that has been stored |
Y |
Y |
Superuser#1 |
|
Reorganizes fragmented free space in a database |
Y |
Y |
Superuser#1 |
|
Checks the operating status of the IM database (such as running or stopped) |
Y |
Y |
Superuser#1 |
|
Terminates the IM database |
Y |
Y |
Superuser#1 |
|
Updates the IM database |
Y |
Y |
Superuser#1 |
Commands related to IM Configuration Management
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Collects virtualization configuration information from HCSM, and outputs it to the virtualization configuration information file |
Y |
Y |
Superuser#1 |
|
Collects virtualization configuration information from KVM, and outputs it to the virtualization configuration information file |
Y |
Y |
Superuser#1 |
|
Collects virtualization configuration information from SCVMM, and outputs it to the virtualization configuration information file |
Y |
-- |
Superuser#1 |
|
Collects virtualization configuration information from vCenter, and outputs it to the virtualization configuration information file |
Y |
Y |
Superuser#1 |
|
Collects virtualization configuration information from Hitachi Compute Blade logical partitioning feature, and outputs it to the virtualization configuration information file |
Y |
Y |
Superuser#1 |
|
Acquires virtualization configuration information from VMware ESX and outputs it to a virtualization configuration information file |
Y |
Y |
Superuser#1 |
|
Outputs the hierarchical configuration (IM configuration) of a system managed by IM Configuration Management, host information, and definition information |
Y |
Y |
Superuser#1 |
|
Imports IM Configuration Management information |
Y |
Y |
Superuser#1 |
|
Creates from the host input information file and Central Scope export file a Central Scope import file that contains monitoring tree information for a virtualization configuration. Alternatively, creates from the business group information file, monitoring group information file, and Central Scope export file a Central Scope import file to which the monitoring tree information of a business group has been added |
Y |
Y |
Superuser#1 |
|
Uses a virtualization configuration information file to update a host input information file |
Y |
Y |
Superuser#1 |
|
Updates the virtualization configuration of the specified host |
Y |
Y |
Superuser#1 |
|
Sets up an operating environment for the IM Configuration Management processes of JP1/IM - Manager |
-- |
Y |
Superuser |
|
Sets up an environment for IM Configuration Management for cluster system operation |
-- |
Y |
Superuser |
|
Sets up an environment for IM Configuration Management for cluster system operation |
Y |
-- |
Superuser#1 |
Commands related to IM Configuration Management (remote monitoring configuration)
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Defines the profile of a remote monitoring event log trap on the specified monitored host |
Y |
-- |
Superuser#1 |
|
Reloads a remote monitoring event log trap action definition file |
Y |
-- |
Superuser#1 |
|
Starts a remote monitoring event log trap |
Y |
-- |
Superuser#1 |
|
Displays the operating status of a remote monitoring event log trap |
Y |
-- |
Superuser#1 |
|
Stops a remote monitoring event log trap |
Y |
-- |
Superuser#1 |
|
Adds or deletes the profile of a remote monitoring log file trap on the specified monitored host |
Y |
Y |
Superuser#1 |
|
Reloads the action definition file of a remote monitoring log file trap |
Y |
Y |
Superuser#1 |
|
Starts a remote monitoring log file trap |
Y |
Y |
Superuser#1 |
|
Displays the operating status of a remote monitoring log file trap |
Y |
Y |
Superuser#1 |
|
Stops a remote monitoring log file trap |
Y |
Y |
Superuser#1 |
Commands related to upgrading
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Converts an action definition file from version earlier than 11-50 to version 11-50 or later |
Y |
Y |
Superuser#1 |
|
Changes the location of the event acquisition filter from Event Console Service to Event Base Service (when the event acquisition filter is being used for compatibility) |
Y |
Y |
Superuser#1 |
|
Migrates JP1/Base command execution logs for version 7 or earlier to a command execution log file for version 8 |
jcocmdconv#2 |
Y |
Y |
Superuser#1 |
Upgrades a logical host environment that was set up using a previous version of JP1/IM - Manager or JP1/IM - Manager (Central Console) |
Y |
Y |
Superuser#1 |
|
Upgrades a physical host environment from a previous version of JP1/IM - Manager (Central Scope) |
Y |
-- |
Superuser#1 |
|
Upgrades a logical host environment that was set up using a previous version of JP1/IM - Manager (Central Scope) |
Y |
-- |
Superuser#1 |
|
Upgrades a physical host environment from a previous version of JP1/IM - Manager (Central Scope) |
-- |
Y |
Superuser |
|
Upgrades a logical host environment that was set up using a previous version of JP1/IM - Manager (Central Scope) |
-- |
Y |
Superuser |
Commands related to the Intelligent Integrated Management Base
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Collects the configuration information of the system managed by JP1/IM - Manager (Intelligent Integrated Management Base) and creates the IM management node-related files |
Y |
Y |
Superuser#1 |
|
Collects system configuration information from the products managed by the Intelligent Integrated Management server, and creates IM management node-related files that are used as input data for the jddupdatetree command |
Y |
Y |
Superuser#1 |
|
Sets a user ID and password that are used for JP1/IM - Manager (Intelligent Integrated Management Base) to be authenticated by linked products |
Y |
Y |
Superuser#1 |
|
Sets authentication information for the proxy server when REST APIs are executed from plug-ins that are provided by JP1/IM - Manager (Intelligent Integrated Management Base) |
Y |
Y |
Superuser#1 |
|
Loads user-defined suggestion definition files and applies them to JP1/IM - Manager (Intelligent Integrated Management Base). |
Y |
Y |
Superuser#1 |
|
Takes the Intelligent Integrated Management Base client information registered with the OpenID provider for OpenID authentication linkage, and sets it in JP1/IM - Manager (Intelligent Integrated Management Base). |
Y |
Y |
Superuser#1 |
|
Takes the mapping information defined in the single sign-on mapping definition file and applies it to JP1/IM - Manager (Intelligent Integrated Management Base). |
Y |
Y |
Superuser#1 |
Commands related to views
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Starts IM Configuration Management - View |
Y |
-- |
None |
|
Registers into or deletes from the Windows Start menu the menu item for starting IM Configuration Management - View |
Y |
-- |
Superuser#1 |
|
Opens JP1/IM - View's Login window or Monitoring Tree (Editing) window, or logs in to JP1/IM - Manager from the command line |
Y |
-- |
None |
Commands related to configuration definition
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Distributes configuration definition information to the lower hosts and enables the definition information |
jbsrt_distrib#2 |
Y |
Y |
Superuser#1 |
Collects configuration definition information from the lower hosts and updates the configuration definition |
jbsrt_sync#2 |
Y |
Y |
Superuser#1 |
Deletes the configuration definition information for the host that executed the command |
jbsrt_del#2 |
Y |
Y |
Superuser#1 |
Displays the existing configuration definition information |
jbsrt_get#2 |
Y |
Y |
Superuser#1 |
Commands related to events
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Changes the response status for severe events |
Y |
Y |
None#3 |
|
Sets up a JP1/IM - Manager system environment |
Y |
Y |
Superuser#1 |
Commands related to automated actions and command execution
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Checks the definitions of automated actions and merges multiple automated action definition files |
Y |
Y |
Superuser#1 |
|
Displays the result of automated action execution |
Y |
Y |
None#3 |
|
Displays to standard output the status of the Automatic Action Service that is running and the contents of the automated action definition file that is loaded. |
Y |
Y |
None#3 |
|
Reloads the automated action definitions, places the automated action function on standby, or enables or disables the automated action definition. |
Y |
Y |
Superuser#1 |
|
Cancels automated actions |
Y |
Y |
Superuser#1 |
|
Sets up a command execution environment |
jcocmddef#2 |
Y |
Y |
Superuser#1 |
Outputs logs of executed commands |
jcocmdlog#2 |
Y |
Y |
None |
Deletes commands that were executed from JP1/IM - View or executed by automated actions |
jcocmddel#2 |
Y |
Y |
Superuser#1 |
Checks the status of commands that were executed from JP1/IM - View or executed by automated actions |
jcocmdshow#2 |
Y |
Y |
Superuser#1 |
Commands related to the email notification function
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Sends email to the specified email address |
Y |
-- |
Superuser#1 |
|
Sets the password for POP before SMTP authentication or SMTP-AUTH authentication in the email environment definition file |
Y |
-- |
Superuser#1 |
Commands related to correlation event generation
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Changes correlation event generation definitions |
Y |
Y |
Superuser#1 |
|
Checks the contents of a correlation event generation definition file |
Y |
Y |
Superuser#1 |
|
Places the correlation event generation function in correlation running status |
Y |
Y |
Superuser#1 |
|
Displays the status of the correlation event generation function and the correlation event generation definitions that are being used currently |
Y |
Y |
None#3 |
|
Places the correlation event generation function in standby status |
Y |
Y |
Superuser#1 |
Commands used in the Central Scope environment setup
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Registers host information into the host information database |
Y |
Y |
Superuser#1 |
|
Acquires host information from the host information database |
Y |
Y |
Superuser#1 |
|
Creates or re-creates the monitoring object database |
Y |
Y |
Superuser#1 |
Commands related to filters
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Switches the event acquisition filter |
Y |
Y |
Superuser#1 |
|
Changes the operating mode of the common exclusion-conditions |
Y |
Y |
Superuser#1 |
Commands related to changing the monitoring node status in Central Scope
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Changes the status of monitoring nodes (monitoring objects or monitoring groups) |
Y |
Y |
Superuser#1 |
Commands for migrating monitoring object database information in Central Scope
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Acquires monitoring object database storage information from JP1/IM - Manager and outputs it locally to a file |
Y |
Y |
Superuser#1 |
|
Applies the information output to a file by the jcsdbexport command to the monitoring object database of JP1/IM - Manager |
Y |
Y |
Superuser#1 |
Commands used for troubleshooting
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Creates a Java thread dump of IM Configuration Management - View |
Y |
-- |
None |
|
Collects data in the event of a failure in JP1/IM - Manager or JP1/IM - View |
Y |
-- |
None#3 |
|
Collects data in the event of a failure in JP1/IM - Manager |
-- |
Y |
Superuser |
|
Collects data in the event of a failure in JP1/IM - View |
Y |
-- |
None#3 |
|
Outputs a thread dump in the event of a failure in JP1/IM - View |
Y |
-- |
None |
|
Outputs a thread dump and a core dump (UNIX only) in the event of a failure in JP1/IM - Manager |
Y |
Y |
Superuser#1 |
|
Tests the notification command that is defined in the health check definition file in JP1/IM - Manager |
Y |
Y |
Superuser#1 |
Commands for checking the contents of the JP1/IM - Manager definition file
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Y |
Y |
None#3 |
||
Y |
Y |
None#3 |
Commands for checking the contents of the JP1/IM - View definition file
Overview of function |
Command name |
Windows |
UNIX |
Required execution permission |
---|---|---|---|---|
Y |
N |
None |
||
Y |
N |
None |