KNAN22249-E

Application of the IM configuration (system hierarchy) failed.

S:

Stops applying the IM configuration.

O:

Take one of the following actions depending on the detailed information.

• A communication with JP1/Base failed.

  Make sure that JP1/Base is running.

• JP1/Base is busy.

  Wait awhile, and then retry the operation.

• A timeout occurred.

  Check the following items:

  • Has an error occurred on a lower-level host?

  • If allocation of the definition takes too much time, the jbsrt_distrib command will time out. Revise the system configuration.

• Failed to read the IM configuration definition file.

  Check the following items:

  • Is the configuration definition file in the correct location?

  • Do you have write permission for the conf/route/ directory?

• A communication error occurred with JP1/Base.

  Check the following items:

  • Revise the common definition jp1hosts.

  • Make sure that the JP1/Base configuration ended normally.

  If these actions do not resolve the problem, collect data, and then contact a system administrator.

• The execution environment of JP1/Base is invalid.

  Check the following items:

  • Is the JP1/Base conf directory defined in the common definition?

  • Did the JP1/Base configuration end normally?

• An internal error occurred in JP1/Base during processing.

  Check the following items:

  • Is there sufficient memory?

  • Has Configuration Management been started?

  • Was JP1/Base restarted after JP1/IM was installed?

  • Do you have write and read permission for the conf/route/ directory?

• There is not the local host name in the IM configuration.

  Define a local host in the configuration definition file.

• Trap running for the removed Agentless host in the IM configuration.

  Check whether the remote monitoring host for which a log file trap was started has been deleted from the IM configuration.

• The IM configuration might have been changed.

  Update the information to the latest host information, and then retry the operation.