jp1cohaverup
- Organization of this page
Function
This command upgrades a logical host environment that was set up for JP1/IM - Manager. Use this command after you have upgraded your JP1/IM - Manager in a logical host environment.
Format
jp1cohaverup -h logical-host-name
Execution permission
In Windows: Administrator permissions (if the Windows UAC feature is enabled, the command is executed from the administrator console)
In UNIX: Superuser permissions
Storage directory
- In Windows:
-
Console-path\bin\
- In UNIX:
-
/opt/jp1cons/bin/
Arguments
- -h logical-host-name
-
Specifies the name of the logical host to be upgraded. If this option is omitted, an error results.
Notes
-
You must terminate JP1/IM - Manager before you execute this command. An error results if this command is executed while JP1/IM - Manager is running.
-
Execute this command only on the primary host. Make sure that the shared disk is mounted when the command executes. Do not execute this command on the secondary host.
-
After you have executed this command, you must back up the common definition information from the primary host, copy the backup common definition information to the secondary host, and then use the jbssetcnf command to set the information.
-
If you have installed a corrected edition of the same version by overwriting, there is no need to execute this command.
Return values
0 |
Normal termination |
1 |
Abnormal termination |
Examples
Upgrade logical host host01:
jp1cohaverup -h host01
Example output
jp1cohaverup -h host01 KAVB9101-I The upgrading of the logical host environment will now start. KAVB9102-I The upgrading of the logical host environment has finished.