1.1.1 Backup (in Windows)

This subsection explains how to back up JP1/IM configuration information.

If you change the JP1/IM configuration, make a backup. When you make a backup of JP1/IM, be sure to make a backup of JP1/Base at the same time. For details about how to back up the definition files that are configured by JP1/Base users, see the JP1/Base User's Guide.

Make a backup using a method of your choice, such as copying files. If at all possible, perform backup procedures while the JP1/IM services are not running. If you must make a backup while these services are running, note the following:

The definition files may be modified during execution in some cases. If a backup is made while a definition file is being modified, the backup file will be corrupted.

Immediately following the backup operation, compare the collected backup file with the original file to make sure their contents match.
When you make a backup, do not lock the target file. If you need to lock the file, first log out from all viewers that are connected, and then copy the target file to another file. After you have copied it, compare the copied file with the original file to make sure their contents match, and then back up the copied file.
When you restore the backed-up configuration information, the configuration is simply modified with the restored content, and the events that have already arrived at JP1/IM - Manager are not re-evaluated.

Of the files shown in the table below, back up all those that exist. If only some of the existing files are backed up, interaction with the remaining files might become inconsistent, preventing the system from operating correctly.

Also, if the system operates in a cluster configuration, back up each environment in the order of physical hosts, then logical hosts.

The table below shows the JP1/IM files to back up. For a logical host, replace Console-path in the table with shared-folder\JP1Cons, replace Scope-path with shared-folder\JP1Scope.

Table 1‒1: JP1/IM files to back up
Product name		File name	Description
Common to all products		Backup files created in 7.3.4 Copying the common definition information during new installation (for Windows) in the JP1/Integrated Management 2 - Manager Configuration Guide	Common definition information backup file^#1
JP1/IM - Manager		`user-selected-file-name`	Private key used by the communication encryption function File specified for the following common definition information: `JP1_DEFAULT\JP1BASE\SSL\PRIVATEKEYFILE\`^#2
			Server certificate used by the communication encryption function File specified for the following common definition information: `JP1_DEFAULT\JP1BASE\SSL\CERTIFICATEFILE`^#2
			Root certificate used by the communication encryption function File specified for the following common definition information: `JP1_DEFAULT\JP1BASE\SSL\CACERTIFICATEFILE`^#2
JP1/IM - Manager	Intelligent Integrated Management Base	`Manager-path\conf\imdd\imdd.properties`	Intelligent Integrated Management Base definition file
		`Manager-path\conf\imdd\systemnode.conf`	System node definition file
		`Manager-path\conf\imdd\category_name.conf`	Category name definition file for IM management nodes
		`Manager-path\conf\imdd\target_host.conf`	Target host definition file for configuration collection
		`Manager-path\conf\imdd\imdd_host_name.conf`	Host name definition file
		`Manager-path\conf\imdd\imdd_nodeLink_def.conf`	IM management node link definition file
		`Manager-path\conf\imdd\imdd_sso_mapping.properties`	Single sign-on mapping definition file
		`Manager-path\conf\imdd\plugin\jp1ajs\*.conf`	Plug-in definition file for JP1/AJS
		`Manager-path\conf\imdd\plugin\jp1pfm\*.conf`	Plug-in definition file for JP1/PFM
		`Manager-path\conf\imdd\user-created-plug-ins`	User-created plug-ins
		`Manager-path\public\custumUI\user-created-folders-for-custom-UIs`	Storage folder for custom UI files
		`Manager-path\conf\imdd\suggestion\template\en\imdd_suggestion_ajs_check_failed_agent_jobnet_en.conf`	English suggestion template files for JP1/AJS
		`Manager-path\conf\imdd\suggestion\template\en\imdd_suggestion_ajs_check_failed_agent_list_en.conf`	English suggestion template files for JP1/AJS
		`Manager-path\conf\imdd\suggestion\template\en\imdd_suggestion_pfm_cpu_event_en.conf`	English suggestion template files for JP1/PFM
		`Manager-path\conf\imdd\suggestion\template\en\imdd_suggestion_pfm_set_status_of_events_to_processed_en.conf`
		`Manager-path\conf\imdd\suggestion\template\en\imdd_suggestion_pfm_suspend_monitoring_en.conf`
		`Manager-path\conf\imdd\suggestion\template\ja\imdd_suggestion_ajs_check_failed_agent_jobnet_ja.conf`	Japanese suggestion template files for JP1/AJS
		`Manager-path\conf\imdd\suggestion\template\ja\imdd_suggestion_ajs_check_failed_agent_list_ja.conf`	Japanese suggestion template files for JP1/AJS
		`Manager-path\conf\imdd\suggestion\template\ja\imdd_suggestion_pfm_cpu_event_ja.conf`	Japanese suggestion template files for JP1/PFM
		`Manager-path\conf\imdd\suggestion\template\ja\imdd_suggestion_pfm_set_status_of_events_to_processed_ja.conf`
		`Manager-path\conf\imdd\suggestion\template\ja\imdd_suggestion_pfm_suspend_monitoring_ja.conf`
		`any-path\suggestion-definition-files`	Suggestion definition file
	Central Console	`Console-path\conf\jp1co_env.conf`	IM environment definition file
		`Console-path\conf\jp1co_param.conf`	IM parameter definition file
		`Console-path\conf\jp1co_param_V7.conf`	IM parameter definition file
		`Console-path\conf\jp1co_service.conf`	Extended startup process definition file
		`Console-path\conf\jp1co_system.conf`	IM server system environment settings file
		`Console-path\conf\action\actdef.conf`	Automated action definition file
		`Console-path\conf\console\actprofile\actprofile_JP1-user-name`	Action profile
		`Console-path\conf\console\actprofile\actprofile2_JP1-user-name`
		`Console-path\conf\console\actprofile\actprofile_0950_JP1-user-name`
		`Console-path\conf\console\attribute\*.conf`	Definition file for extended event attributes
		`Console-path\conf\console\attribute\extend\*.conf`	Definition file for extended event attributes (extended file)
		`Console-path\conf\console\filter\*.conf`	Filter definition file
		`Console-path\conf\console\filter\attr_list\common_exclude_filter_attr_list.conf`	Common-exclusion-conditions display item definition file
		`Console-path\conf\console\filter\auto_list\common_exclude_filter_auto_list.conf`	Common-exclusion-conditions auto-input definition file
		`Console-path\conf\console\mapping\mapping.conf`	Event information mapping definition file
		`Console-path\conf\console\monitor\*.conf`	Definition file for opening monitor windows
		`Console-path\conf\console\object_type\*`	Definition file for object types
		`Console-path\conf\console\profile\.system`	System profile
		`Console-path\conf\console\profile\defaultUser`	JP1/IM - View user profile (default)
		`Console-path\conf\console\profile\profile_JP1-user-name`	JP1/IM - View user profile
		`Console-path\conf\console\profile\systemColor.conf`	System color definition file
		`Console-path\default\console.conf`^#3	Communication environment definition file
		`Console-path\conf\console\correlation\view_cor.conf`	Settings file for the consolidated display of repeated events
		`Console-path\conf\console\correlation\view_cor_JP1-user-name.conf`	Settings file for the consolidated display of repeated events
		`Console-path\conf\console\rmtcmd\cmdbtn.conf`	Command button definition file
		`Console-path\conf\health\jcohc.conf`	Health check definition file
		`Console-path\conf\hostmap\user_hostmap.conf`	Event-source-host mapping definition file
		`Console-path\conf\action\actnotice.conf`	Automatic action notification definition file
		`Console-path\conf\processupdate\processupdate.conf`	Status event definition file
		`Console-path\conf\guide\jco_guide.txt`	Event guide information file
		`Console-path\conf\system\event_storm\*.conf`	Repeated event condition definition file
		`Console-path\conf\console\event_storm\attr_list\event_storm_attr_list.conf`	Display item definition file for repeated event condition
		`Console-path\conf\console\event_storm\auto_list\event_storm_auto_list.conf`	Auto-input definition file for repeated event condition
		`Console-path\conf\console\incident\incident.conf`	Definition file for manually registering incidents
		`Console-path\conf\console\incident\incident_info.conf`	Configuration file for incident inheritance information
		`user-selected-folder\user-selected-file-name`	Event guide message file
		All files under `Console-path\conf\evgen\`	Definition files for correlation event generation
		`user-selected-folder\file-name.conf`	Correlation event generation definition file
		`Console-path\conf\action\attr_list\attr_list.conf`	File that defines which items are displayed for event conditions
		`Console-path\conf\chsev\jcochsev.conf`	Severity changing definition file
		`Console-path\conf\chsev\attr_list\chsev_attr_list.conf`	Display item definition file for severity change definition
		`Console-path\conf\chsev\auto_list\chsev_auto_list.conf`	Automatic input definition file for severity change definition
`Console-path\conf\mail\jimmail.conf`		Email environment definition file
`Console-path\conf\chattr\jcochmsg.conf`		Display message change definition file
`Console-path\conf\chattr\attr_list\chmsg_attr_list.conf`		Display item definition file for a display message change definition
`Console-path\conf\chattr\auto_list\chmsg_auto_list.conf`		Automatic input definition file for a display message change definition
`Console-path\conf\console\performance\performance.conf`		Performance report display definition file
Central Scope	`Scope-path\conf\jcs_guide*.txt`	Guide information file
	`Scope-path\conf\jcs_hosts`	Host information file
	`Scope-path\conf\action_complete_on.conf`	Settings file for completed-action linkage function
	`Scope-path\conf\action_complete_off.conf`	Settings file for completed-action linkage function
	`user-selected-folder\user-selected-file-name`	Definition file for automatic delete mode of status change event
	`user-selected-folder\user-selected-file-name`	Definition file for monitoring object initialization mode
	`Scope-path\conf\auto_dbbackup_on.conf`	Backup recovery settings file for monitored object database
	`Scope-path\conf\auto_dbbackup_off.conf`	Backup recovery settings file for monitored object database
	`Scope-path\conf\evhist_warn_event_on.conf`	Settings file for the maximum number of status change events
	`Scope-path\conf\evhist_warn_event_off.conf`
	`user-selected-folder\user-selected-file-name`	Guide message file
	`user-selected-folder\user-selected-file-name`	Definition file for on memory mode of status change condition
IM Configuration Management	`Manager-path\conf\imcf\jp1cf_applyconfig.conf`	Apply-IM-configuration-method definition file
	`Manager-path\conf\imcf\jp1cf_treedefaultpolicy.csv`	Default monitoring policy definition file
	`Manager-path\conf\agtless\targets\wmi.ini`	Definition files regarding WMI authentication information
	`Manager-path\conf\agtless\targets\ssh.ini`	Definition files regarding SSH authentication information
JP1/IM - View		`View-path\conf\webdata\en\.html` `View-path\conf\webdata\ja\.html` `View-path\conf\webdata\zh\*.html`	Web page call definition file
		`View-path\conf\tuning.conf`	IM - View settings file
		`View-path\conf\ssl\nosslhost.conf`	Non-encryption communication host configuration file
		`View-path\default\view.conf.update`	Communication environment definition file
		`View-path\default\tree_view.conf.update`	Communication environment definition file
		`View-path\conf\sovtoolexec\en\!JP1_CS_APP0.conf` `View-path\conf\sovtoolexec\ja\!JP1_CS_APP0.conf` `View-path\conf\sovtoolexec\zh\!JP1_CS_APP0.conf`	Start program definition file
		`View-path\conf\sovtoolitem\en\!JP1_CS_FTOOL0.conf` `View-path\conf\sovtoolitem\ja\!JP1_CS_FTOOL0.conf` `View-path\conf\sovtoolitem\zh\!JP1_CS_FTOOL0.conf`	Toolbar definition file
		`View-path\conf\sovtoolitem\en\!JP1_CS_FTREE0.conf` `View-path\conf\sovtoolitem\ja\!JP1_CS_FTREE0.conf` `View-path\conf\sovtoolitem\zh\!JP1_CS_FTREE0.conf`	Icon operation definition file
		`View-path\conf\appexecute\en\.conf` `View-path\conf\appexecute\ja\.conf` `View-path\conf\appexecute\zh\*.conf`	Definition file for executing applications
		`View-path\conf\function\en\.conf` `View-path\conf\function\ja\.conf` `View-path\conf\function\zh\*.conf`	Definition file for the tool launcher
		`user-selected-folder\user-selected-file-name`	Configuration file for monitoring tree
		Files under `View-path\image\icon\`	Icon file
		Files under `View-path\image\visual\`	Visual icon file^#4
		Files under `View-path\image\map\`	Background-image-file-name
		`View-path\conf\jcfview\jcfview.conf`	Operation definition file for IM Configuration Management - View
		`View-path\conf\jrmview\jrmview.conf`	Operation definition file for Rule Operation - View^#5
		`View-path\default\jrmview_reg.conf`	Common definition settings file^#5
		`View-path\conf\sovsystem\en\system.conf`	System profile of the Central Scope viewer
		`View-path\conf\sovsystem\ja\system.conf`
		`View-path\conf\sovsystem\zh\system.conf`

#1: The common definition information backup file backs up the definition information of a logical host in a cluster system. This backup file is created during setup of the cluster system. This backup file backs up the definition information of JP1/IM as well as JP1/Base, JP1/AJS, and Version 06-02 and later of JP1/Power Monitor. For details, see 7.1.3(5) Setting common definition information in the JP1/Integrated Management 2 - Manager Configuration Guide.

#2: On a logical host, JP1_DEFAULT is the logical host name.

#3: This file exists only on a physical host.

#4: Files added by the user are backed up.

#5: This file is used by JP1/IM - View (the part linked to JP1/IM - Rule Operation).

To Page Top