Hitachi

JP1 Version 12 JP1/Integrated Management 2 - Manager Configuration Guide


9.4.5 Checking whether the communication encryption function has been configured correctly

Use the procedure described below to check that the communication encryption function has been enabled or disabled. If there are multiple manager hosts, perform this procedure on each of the manager hosts.

  1. Check the integrated trace log of the manager host.

    • If you are verifying that the communication encryption function has been enabled, check that the KAVB8810-I message has been output to the integrated trace log.

    • If you are verifying that the communication encryption function has been disabled, check that the KAVB8811-I message has been output to the integrated trace log.

  2. Verify that you can connect to JP1/IM - Manager from the Web browser.

    If you are using the Intelligent Integrated Management Base, confirm that you can log in to the Intelligent Integrated Management Base.

    For details about the login procedure, see Chapter 4. JP1/IM - Manager Login and Logout in the JP1/Integrated Management 2 - Manager Administration Guide.

  3. Verify that you can connect from JP1/IM - View to JP1/IM - Manager.

    Verify that you can log in to Central Console.

    If you use Central Scope, verify that you can log in to Central Scope.

    If you use IM Configuration Management, verify that you can log into IM Configuration Management.

    For details about how to log in, see Chapter 4. JP1/IM - Manager Login and Logout in the JP1/Integrated Management 2 - Manager Administration Guide.

  4. Verify that commands can be executed and that command execution by automated actions is enabled.

    From JP1/IM - View's Execute Command window, execute a command on the manager host and verify that the KAVB2013-I message reporting the completion of execution is displayed in Log.

    Execute a command by automated action on the manager host and verify in the Action Log window or the List of Action Results window in JP1/IM - View that the executed action has terminated.

    For details about how to execute commands, see 8.1 Executing a command in the JP1/Integrated Management 2 - Manager Administration Guide.

    For details about how to execute commands by automated actions, see 5.5 Setting automated actions.

  5. Verify that Synchronize IM Configuration can be performed successfully.

    If you are using IM Configuration Management to manage base managers, execute Synchronize IM Configuration from the IM Configuration Management window and verify that remote monitoring configuration information can be collected.

    For details about how to execute Synchronize IM Configuration, see 3.2.5 Synchronizing the system hierarchy.