4.12.1 Direct access URL

The table below shows query parameters specified in a direct access URL. Specify a URL-encoded value for each query parameter.

Table 4‒4: Query parameters for the direct access URL
No.	Query parameter	Required/optional	Description
1	`seqno`	Optional	Specifies the serial number.
2	`sid`	Optional	Specifies the tree SID of the node that will be displayed in the selected state. If this parameter is omitted, the system assumes that the tree SID of `All` `Systems` at the beginning of the tree is selected. When `seqno` is specified, the `sid` value corresponding to the serial number is obtained and overwritten regardless of whether the `sid` parameter is specified.
3	`dialog`	Optional	Specifies to show the Event detail dialog box when `detail` is specified. If this parameter is omitted, or if an invalid value is specified, the SID of a JP1 event is not obtained.
4	`tab`	Optional	Specifies the tab that will be displayed for direct access. You can specify one of the following values: `_HITACHIJP1PFMWC` It shows the Performance tab. `custom UI` `Id`^# It shows the Custom UI tab. For `Id`, specify the value designated for the `jp1.imdd.gui.settings.contentViews.<custom UI Id>` property of the custom UI display function. `suggestion` It shows the Suggestion tab. `job` It shows the Job flow tab. `relation` It shows the Related node tab. `trend` It shows the Trends tab. If this parameter is omitted, the tabs are shown according to the priorities of the tabs to be displayed. For details, see Table 4-5.
5	`view`	Optional	Specifies the format of the Operating status area in the Integrated Operation Viewer window to be displayed. You can specify one of the following formats: `sunburst`: Sunburst chart format `tree`: Tree chart format If the parameter is omitted, the system assumes `sunburst`.
6	`eou`	Required	URL terminal flag. Specify `1` at the end of a URL.

#: For details about the jp1.imdd.gui.settings.contentViews.<custom UI Id> property of the custom UI display function, see 6.2 Customization definition information of the Integrated Operation Viewer window in the manual JP1/Integrated Management 2 - Manager Command, Definition File and API Reference.

Table 4‒5: Priority of the tab to be displayed
Tab name	Priority
Performance	1
Custom UI^#	2
Suggestion	3
Job flow	4
Related node	5
Trends	6

#: The window shows as many tabs as the number of the Custom UI tabs defined by the user. Note that the Custom UI tabs are displayed in the order of the definition in the Intelligent Integrated Management Base definition file (imdd.properties). For details, see Intelligent Integrated Management Base definition file (imdd.properties) in Chapter 2. Definition Files in the manual JP1/Integrated Management 2 - Manager Command, Definition File and API Reference.

Important

If a serial number is changed due to a server replacement, a disk failure, or other reasons, the serial number might overlap in the integrated monitoring database of JP1/IM - Manager. If the serial number overlaps, the event information on the latest event is obtained by the seqno parameter. Thus, if the serial number retrieved from the information on an old incident is specified for the seqno parameter, an unwanted event might be obtained. If the serial number is changed, check that the details of the incident coincide with the ones of the event when specifying the parameter.
Because the serial number specified for the seqno parameter is redirected after the sid value corresponding to the serial number is obtained, it does not remain in the Web browser address bar. Therefore, take measures so that the serial number is retained at the calling source and the event information can be checked.

To Page Top