2.3.2 How to use the Hitachi Program Product Installer (for UNIX)
The Hitachi Program Product Installer is on the JP1/IM distribution medium. This subsection describes the following procedures:
-
How to start the Hitachi Program Product Installer
-
How to use the Hitachi Program Product Installer to install JP1/IM - Manager
-
How to use the Hitachi Program Product Installer to remove JP1/IM - Manager
-
How to use the Hitachi Program Product Installer to check the versions of currently installed Hitachi products
- User permissions for execution of the Hitachi Program Product Installer
-
-
To use the Hitachi Program Product Installer, you need root permissions. Either log on as root or use the su command to change the user to root.
-
- Organization of this subsection
(1) Starting the Hitachi Program Product Installer
To start the Hitachi Program Product Installer:
-
Insert the JP1/IM - Manager distribution medium in the drive.
-
Mount the distribution medium.
The mounting method depends on the OS, hardware, and environment in use. For details about the mounting method, see the OS documentation.
-
In Linux
/bin/mount -r -o mode=0544 /dev/cdrom /mnt/cdrom
Note that the underlined distribution medium file system mount directory name depends on the environment.
-
-
Start the Hitachi Program Product Installer.
The directory and file names on the distribution medium might differ depending on the machine environment. Use the ls command to check the directory and file names, and then use the displayed names.
-
In Linux
/mnt/cdrom/linux/setup /mnt/cdrom
Replace the underlined part with the actual distribution medium mount directory name.
- Important
-
During installation, do not start Hitachi Program Product Installer by executing /etc/hitachi_setup.
-
-
Unmount the distribution medium.
After you finish the installation, unmount the distribution medium. For details about how to unmount a distribution medium, see the OS documentation.
-
In Linux
/bin/umount /mnt/cdrom
Replace the underlined part with the actual distribution medium mount directory name.
-
(2) Installing JP1/IM - Manager
This subsection explains how to use the Hitachi Program Product Installer to install JP1/IM - Manager. When you start the Hitachi Program Product Installer, the initial window appears.
|
|
![[Figure]](GRAPHICS/CS100300.GIF)
In Select Procedure in the initial window, enter I to display a list of software programs that can be installed. Move the cursor to the software program that you want to install, and then press the space bar to select it. Entering I again installs JP1/IM - Manager. After installation is completed, enter Q to return to the initial window.
(3) Removing JP1/IM - Manager
Enter the following command to start the Hitachi Program Product Installer:
/etc/hitachi_setup
The Hitachi Program Product Installer's initial window is displayed. For details about the initial window, see Figure 2-3 Example of the Hitachi Program Product Installer's initial window.
In Select Procedure in the initial window, enter D to display a list of software programs that can be removed. Move the cursor to the software program that you want to remove, and then press the space bar to select it. Entering D again removes the software program. After the software program has been removed, enter Q to return to the initial window.
(4) Displaying version information
Execute the following command to start the Hitachi Program Product Installer:
/etc/hitachi_setup
The Hitachi Program Product Installer's initial window is displayed. For details about the initial window, see Figure 2-3 Example of the Hitachi Program Product Installer's initial window.
In Select Procedure in the initial window, enter L to display a list of Hitachi products that have been installed.