E.2 Operating permissions required for system monitoring using the Central Console
Operating permissions required for system monitoring using the Central Console differs depending on whether restrictions on viewing and operating business groups are enabled.
- Organization of this subsection
(1) Operating permissions required when restrictions on viewing and operating business groups are disabled
The following table lists and describes operating permissions required when restrictions on viewing and operating business groups are disabled.
Type of operation |
JP1 permission level |
|||||
---|---|---|---|---|---|---|
Category |
Operation |
Description |
Admin |
Operator |
User |
None |
System settings |
Set the system environment |
Set the JP1/IM - Manager environment in the following windows:
|
Y |
-- |
-- |
-- |
Define for changing the event severity |
Change the severity of JP1 events that satisfy conditions by using the following windows:
|
Y |
-- |
-- |
-- |
|
Define severe events |
Define severe events in the Severe Event Definitions window. |
Y |
-- |
-- |
-- |
|
Set an event receiver filter |
Set an event receiver filter in the following windows:
|
Y |
-- |
-- |
-- |
|
Set automated actions |
Set automated actions in the following windows:
|
Y |
-- |
-- |
-- |
|
Set event information mapping |
Set event information mapping in the following windows:
|
Y |
-- |
-- |
-- |
|
Set repeated event conditions |
Set repeated event conditions in the following windows:
|
Y |
-- |
-- |
-- |
|
Set display message change |
Set the display message change definition in the following windows:
|
Y |
-- |
-- |
-- |
|
System operations |
Change the response status of severe events |
Change the response status of JP1 events. |
Y |
Y |
-- |
Y |
Release a severe event |
Change a JP1 event displayed on the Severe Events page to a non-severe event. |
Y |
-- |
-- |
-- |
|
Clear status notification suppression |
Re-enable notification of automated action errors when the notification function is suppressed during delay monitoring or status monitoring. |
Y |
Y |
-- |
Y |
|
Cancel an automated action |
Request the cancellation of an automated action in Wait, Queue, or Running status (by clicking the Cancel Action button in the Action Log window, Action Log Details window, or List of Action Results window). |
Y |
Y |
-- |
Y |
|
Re-execute an automated action |
Re-execute an automated action in Error or Ended status (by clicking the Re-execute button in the Action Log window, Action Log Details window, or List of Action Results window). |
Y |
Y |
-- |
Y |
|
Execute commands |
Execute commands on managed hosts in the Execute Command window. |
Y |
Y |
-- |
Y |
|
Respond to response-waiting events |
Enter responses for response-waiting events in the Enter Response window. |
Y |
Y |
-- |
Y |
|
Release response-waiting events from the hold-and-accumulate state |
Release response-waiting events from the hold-and-accumulate state on the Response-Waiting Events page of the Event Console window. |
Y |
Y |
-- |
Y |
|
Restore monitoring of the accumulation of response-waiting events |
Restore the function that notifies the user when the number of accumulated response-waiting events exceeds the upper limit. |
Y |
-- |
-- |
-- |
|
Edit memo entries |
Set memo entries in the following window:
|
Y |
Y |
-- |
Y |
|
Viewing operations |
View JP1 events |
View JP1 events on the Monitor Events page and Severe Events page of the Event Console window. |
Y |
Y |
Y |
Y |
View JP1 event details in the Event Details window |
||||||
View related events in the Related Events window. |
||||||
View the results of automated actions |
View the results of automated actions in the following windows:
|
Y |
Y |
Y |
Y |
|
Search for events |
Search for events in the following windows and display the results on the Search Events page of the Event Console window:
|
Y |
Y |
Y |
Y |
|
Use a view filter |
Set conditions for the JP1 events displayed on the Monitor Events and Severe Events pages of the Event Console window. |
Y |
Y |
Y |
Y |
|
Switch between view filters. |
||||||
Display event guide information |
Check guide information in the Event Details window. |
Y |
Y |
Y |
Y |
|
Set the user environment |
Set the user environment |
Open the Preferences window and set the user environment. |
Y |
Y |
Y |
Y |
Start linked products |
Launch the GUI of another application |
Launch the application that reported a JP1 event, and view or manipulate information. |
Y |
Y |
Y |
Y |
Open the Tool Launcher window |
Use the Tool Launcher window to start linked products. |
Y |
Y |
Y |
Y |
|
Launch the Rule Operation viewer GUI |
Launch the Rule Log Details window of JP1/IM - Rule Operation from the Action Log window, Action Log Details window, or List of Action Results window. |
Y |
Y |
Y |
Y |
- Legend:
-
Admin: JP1_Console_Admin
Operator: JP1_Console_Operator
User: JP1_Console_User
Y: Can perform the operation.
--: Cannot perform the operation.
- Notes:
-
-
When a JP1 user is granted two or more JP1 permission levels, and a particular operation is permitted by one level but prohibited by another, the operation is permitted.
-
Menus and buttons for functions that are not permitted under the various permission levels are unavailable in the JP1/IM - View windows.
-
The assigned JP1 permission level is checked only when the JP1 user logs in. If the JP1 permission level is subsequently changed on the authentication server, the new permission level takes effect the next time the JP1 user logs in.
-
(2) Operating permissions required when restrictions on viewing and operating business groups are enabled
The following table lists and describes operating permissions required when restrictions on viewing and operating business groups are enabled.
Type of operation |
JP1 resource group |
||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
JP1_Console or * |
Other than JP1_Console |
Not specified |
|||||||||
JP1 permission level |
|||||||||||
Category |
Operation |
Description |
Admin |
Operator |
User |
None |
Admin |
Operator |
User |
None |
None |
System settings |
Set the system environment |
Set the JP1/IM - Manager environment in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
Define for changing the event severity |
Change the severity of JP1 events that satisfy conditions by using the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Define severe events |
Define severe events in the Severe Event Definitions window. |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Set an event receiver filter |
Set an event receiver filter in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Set automated actions |
Set automated actions in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Set event information mapping |
Set event information mapping in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Set repeated event conditions |
Set repeated event conditions in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Set display message change |
Set the display message change definition in the following windows:
|
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
System operations |
Change the response status of severe events |
Change the response status of JP1 events. |
Y |
Y |
-- |
-- |
Y |
Y |
-- |
-- |
-- |
Release a severe event |
Change a JP1 event displayed on the Severe Events page to a non-severe event. |
Y |
-- |
-- |
-- |
Y |
-- |
-- |
-- |
-- |
|
Clear status notification suppression |
Re-enable notification of automated action errors when the notification function is suppressed during delay monitoring or status monitoring. |
Y |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Cancel an automated action |
Request the cancellation of an automated action in Wait, Queue, or Running status (by clicking the Cancel Action button in the Action Log window, Action Log Details window, or List of Action Results window). |
Y |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Re-execute an automated action |
Re-execute an automated action in Error or Ended status (by clicking the Re-execute button in the Action Log window, Action Log Details window, or List of Action Results window). |
Y |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
-- |
|
Execute commands |
Execute commands on managed hosts in the Execute Command window. |
Y |
Y |
-- |
-- |
Y# |
Y# |
-- |
-- |
-- |
|
Respond to response-waiting events |
Enter responses for response-waiting events in the Enter Response window. |
Y |
Y |
-- |
-- |
Y |
Y |
-- |
-- |
-- |
|
Release response-waiting events from the hold-and-accumulate state |
Release response-waiting events from the hold-and-accumulate state on the Response-Waiting Events page of the Event Console window. |
Y |
Y |
-- |
-- |
Y |
Y |
-- |
-- |
-- |
|
Restore monitoring of the accumulation of response-waiting events |
Restore the function that notifies the user when the number of accumulated response-waiting events exceeds the upper limit. |
Y |
-- |
-- |
-- |
Y |
-- |
-- |
-- |
-- |
|
Edit memo entries |
Set memo entries in the following window:
|
Y |
Y |
-- |
-- |
Y |
Y |
-- |
-- |
-- |
|
Viewing operations |
View JP1 events |
View JP1 events on the Monitor Events page and Severe Events page of the Event Console window. |
Y |
Y |
Y |
-- |
Y# |
Y# |
Y# |
-- |
-- |
View JP1 event details in the Event Details window |
|||||||||||
View related events in the Related Events window. |
|||||||||||
View the results of automated actions |
View the results of automated actions in the following windows:
|
Y |
Y |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
|
Search for events |
Search for events in the following windows and display the results on the Search Events page of the Event Console window:
|
Y |
Y |
Y |
-- |
Y# |
Y# |
Y# |
-- |
-- |
|
Use a view filter |
Set conditions for the JP1 events displayed on the Monitor Events and Severe Events pages of the Event Console window. |
Y |
Y |
Y |
-- |
Y |
Y |
Y |
-- |
-- |
|
Switch between view filters. |
|||||||||||
Display event guide information |
Check guide information in the Event Details window. |
Y |
Y |
Y |
-- |
Y |
Y |
Y |
-- |
-- |
|
Set the user environment |
Set the user environment |
Open the Preferences window and set the user environment. |
Y |
Y |
Y |
-- |
Y |
Y |
Y |
-- |
-- |
Start linked products |
Launch the GUI of another application |
Launch the application that reported a JP1 event, and view or manipulate information. |
Y |
Y |
Y |
-- |
Y |
Y |
Y |
-- |
-- |
Open the Tool Launcher window |
Use the Tool Launcher window to start linked products. |
Y |
Y |
Y |
-- |
Y |
Y |
Y |
-- |
-- |
|
Launch the Rule Operation viewer GUI |
Launch the Rule Log Details window of JP1/IM - Rule Operation from the Action Log window, Action Log Details window, or List of Action Results window. |
Y |
Y |
Y |
-- |
-- |
-- |
-- |
-- |
-- |
- Legend:
-
Admin: JP1_Console_Admin
Operator: JP1_Console_Operator
User: JP1_Console_User
Y: Can perform the operation.
--: Cannot perform the operation.
- Notes:
-
The assigned JP1 permission level is checked only when the JP1 user logs in. If the JP1 permission level is subsequently changed on the authentication server, the new permission level takes effect the next time the JP1 user logs in.
- #:
-
Operations for the hosts in the business group, or JP1 events generated in the business group can be displayed.