9.4.2 Messages of the data transfer command
The list of messages of the data transfer command is as follows.
Message ID |
Message contents |
Explanation |
---|---|---|
DWCO1001_I |
Command start. |
Notify that the data transfer command has been started. |
DWCO1002_I |
Command finished. |
Notify that the data transfer command was finished. |
DWCO1031_I |
Ready to sending is started.(Command Line Arguments:{0}) |
Notify that the ready to sending is started. Command Line Arguments is outputted to {0} parameter. |
DWCO1032_I |
Ready to sending is ended. (Delivery ID:{0}) |
Notify that the ready to sending is ended. Delivery ID is outputted to {0} parameter. |
DWCO1036_I |
Sending a file to the server is started. (File/Folder path:{0}, File/Folder size:{1}Byte, Last modified time:{2}) |
Notify that the sending a file to the server is started. {0} : File/Folder path {1} : File/Folder size {2} : Last modified time |
DWCO1037_I |
Sending a file to the server is ended. (File ID:{0}, File/Folder size:{1}Byte, Last modified time:{2}) |
Notify that the sending a file to the server is ended. {0} : File ID {1} : File/Folder size {2} : Last modified time |
DWCO1041_I |
Sending files completed. |
Notify that sending files was completed. |
DWCO1042_I |
Calculation of the file digest was skipped. |
Notify that calculation of the file digest was skipped. |
DWCO1043_I |
Calculation of the file digest is started. (File/Folder path:{0}, File/Folder size:{1}Byte, Last modified time:{2}) |
Notify that the calculation of the file digest is started. {0} : File/Folder path {1} : File/Folder size {2} : Last modified time |
DWCO1044_I |
Calculation of the file digest is ended. (Digest:{0}, File/Folder size:{1}Byte, Last modified time:{2}) |
Notify that the calculation of the file digest is ended. {0} : Digest {1} : File/Folder size {2} : Last modified time |
DWCO1051_I |
Ready to receiving is started.(Command Line Arguments:{0}) |
Notify that the ready to receiving is started. Command Line Arguments is outputted to {0} parameter. |
DWCO1052_I |
Ready to receiving is ended. (Number of new file:{0}) |
Notify that the ready to receiving is ended. Number of new file is outputted to {0} parameter. |
DWCO1056_I |
Receiving a file from the server is started. (Delivery ID:{0}, File ID:{1}, File/Folder path:{2}, File/Folder size:{3}) |
Notify that the receiving a file from the server is started. {0} : Delivery ID {1} : File ID {2} : File/Folder path {3} : File/Folder size |
DWCO1057_I |
Receiving a file from the server is ended. (Delivery ID:{0}, File ID:{1}, File/Folder path:{2}, File/Folder size:{3}, Last modified time:{4}) |
Notify that the receiving a file from the server is ended. {0} : Delivery ID {1} : File ID {2} : File/Folder path {3} : File/Folder size {4} : Last modified time |
DWCO1059_I |
Moving a file is started. (Source path:{0}, Destination path:{1}, File/Folder size:{2}, Last modified time:{3}) |
Notify that the moving a file is started. {0} : Source path {1} : Destination path {2} : File/Folder size {3} : Last modified time |
DWCO1060_I |
Moving a file is ended. (Source path:{0}, Destination path:{1}, File/Folder size:{2}, Last modified time:{3}) |
Notify that the moving a file is ended. {0} : Source path {1} : Destination path {2} : File/Folder size {3} : Last modified time |
DWCO1061_I |
Received a file/folder. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}) |
Notify that the delivery was received. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name |
DWCO1062_I |
A file/folder was overwritten because a file/folder with the same name already exists. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}) |
Notify that the file/folder was overwritten because the same name file/folder was already existed in the output folder. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name |
DWCO1063_W |
Cannot receive a file/folder. It might be caused by the following reasons. The delivery expired. The number of times you download this file is limited. You exceeded your download limit. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}), Details:{3}) |
Cannot receive the delivery because of the following reasons.
Although the download of this delivery is skipped, the delivery is added to the Received List File. If you want to receive this delivery when this limitation is cancelled, refer to Delivery ID and receive the delivery by Web. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name {3} : Details |
DWCO1064_W |
The delivery contains only message. (Delivery ID:{0}) |
Although files are not downloaded because the delivery contains only message, the delivery is treated as finishing receiving. Delivery ID is outputted to {0} parameter. |
DWCO1065_W |
Cannot receive the delivery because it expired. (Delivery ID:{0}) |
Cannot receive the delivery because it expired. Although the download of this delivery is skipped, the delivery is added to the Received List File. Delivery ID is outputted to {0} parameter. |
DWCO1066_W |
Cannot receive the delivery because the sender was deleted or inactivated or there is no available delivery rule. (Delivery ID:{0}) |
Cannot receive the delivery because the sender was inactivated or deleted or there is no available delivery rule. Although the download of this delivery is skipped, the delivery is added to the Received List File. Delivery ID is outputted to {0} parameter. |
DWCO1067_W |
Cannot receive the delivery because the delivery was deleted just before you started downloading or the approver of the delivery was deleted. (Delivery ID:{0}) |
Cannot receive the delivery because the delivery was deleted just before you started downloading or the approver of the delivery was deleted. Although the download of this delivery is skipped, the delivery is added to the Received List File. Delivery ID is outputted to {0} parameter. |
DWCO1068_W |
Failed to verify the file/folder. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}) |
Failed to verify the file/folder which was downloaded. The downloaded file is deleted. (The file on the Server is not deleted.) The download of this delivery is skipped. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name |
DWCO1069_W |
Cannot receive a file/folder because the file/folder was deleted. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}) |
Cannot download because the file was deleted. Although the download of this delivery is skipped, the delivery is added to the Received List File. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name |
DWC01070_W |
Cannot receive the delivery because a file/folder with the same name already exists. (Delivery ID:{0}, File ID:{1}, File/Folder name:{2}) |
Notify that the download was skipped because the same name file/folder was already existed in the output folder. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : File/Folder name |
DWCO1071_I |
Verification of the file digest was skipped. |
Notify that verification of the file digest was skipped. |
DWCO1101_E |
An option [{0}] must be specified only once. |
Do not specify two or more same options. Two or more specified options are outputted to {0} parameter. |
DWCO1102_E |
Arguments must be a pair of an option key and its value. |
The option key only or value only was specified to argument of the date transfer command. Specify the pair of the option key and its value. |
DWCO1103_E |
Option [{0}] is invalid. |
Specify the valid option. The invalid option is outputted to {0} parameter. |
DWCO1104_E |
Please Specify option [{1}]. |
The indispensable option is not specified. Specify the indispensable option. The indispensable option is outputted to {1} parameter. |
DWCO1105_E |
Please specify option [{1}] within [{0}] characters. |
The number of characters of the value which is specified to the option is over the maximum number of characters of the option. |
DWCO1106_E |
The maximum number of email addresses you can specify to [-to|-cc|-bcc] is [{0}]. |
Specify the email address or group name within the maximum number of them. The maximum number of the email address which can be specified is outputted to {0} parameter. |
DWCO1107_E |
An email address must be between [{1}] and [{2}] characters. |
Check the number of characters of the email address. The following contents are outputted for each parameter. {1} : The minimum number of characters of the email address {2} : The maximum number of characters of the email address |
DWCO1108_E |
The number of files you can specify to [-file] must be between [{1}] and [{2}]. |
Check the number of specified files. The following contents are outputted for each parameter. {1} : The minimum number of files which can be specified to [-file] option {2} : The maximum number of files which can be specified to [-file] option |
DWCO1109_E |
The specified files/folders do not exist or cannot be read. (Path:{0}) |
Check the following condition.
The path of the specified file/folder is outputted to {0} parameter. |
DWCO1110_E |
Please specify an integer number between [{1}] to [{2}] for option [{3}]. |
Specify the integer number which is in the suitable range for the option. The following contents are outputted for each parameter. {1} : The minimum number of integer of the option which can be specified {2} : The maximum number of integer of the option which can be specified {3} : Option |
DWCO1112_E |
The settings of Command Property File is wrong. (Setting:{0}, Value:{1}) |
The setting of the Command Property File (property.xml) is wrong. Check the following setting.
Execute again after modifying the setting. The following contents are outputted for each parameter. {0} : The item name of the setting {1} : The value of the setting |
DWCO1113_E |
The selected files/folders do not exist or cannot be read. (Path:{0}) |
Check the following condition.
The path of the specified file/folder is outputted to {0} parameter. |
DWCO1114_E |
Failed to write to a received list. (Path:{0}) |
Check the command has the permission to write the specified Received List File. The path of the specified Received List File is outputted to {0} parameter. |
DWCO1115_E |
Failed to read a received list. (Path:{0}) |
Check the command has the permission to read the specified Received List File. The path of the specified Received List File is outputted to {0} parameter. |
DWCO1116_E |
Failed to create a received list. (Path:{0}) |
Check the command has the permission to write the path of the specified Received List File. The path of the specified Received List File is outputted to {0} parameter. |
DWCO1117_E |
Please specify option either [{0}] or [{1}]. |
Specify option either [-message] or [-messagefile]. The following contents are outputted for each parameter. {0} : The message ([-message] option) {1} : The message file ([-messagefile] option) |
DWC01118_E |
Cannot specify an unnecessary parameter.(parameter:{0}) |
Cannot appoint an unnecessary value. The unnecessary parameter is outputted to {0} parameter. |
DWCO1121_E |
Please specify message in a file within [{2}] characters. |
Specify the message in the file within 4096 characters. 4096 is outputted to {2} parameter. |
DWCO1122_E |
An open password must be between [{1}] and [{2}] characters. |
Check the number of characters of the open password. The following contents are outputted for each parameter. {1} : The minimum number of characters of the open password {2} : The maximum number of characters of the open password |
DWCO1123_E |
An open password must be between [{1}] and [{2}] characters and must contain two or more types of characters. |
Check the number of characters and the type of the open password. The following contents are outputted for each parameter. {1} : The minimum number of characters of the open password {2} : The maximum number of characters of the open password |
DWCO1124_E |
An open password includes restricted strings. |
The open password includes restricted strings. |
DWCO1130_E |
Please specify a name between [{0}] and [{1}] characters. |
Check the number of characters of the name. The following contents are outputted for each parameter. {0} : The minimum number of characters of the name {1} : The maximum number of characters of the name |
DWCO1131_E |
A name includes restricted strings. |
Specify the string which can be used for the name again. Cannot use the following symbol for the name. /\?*:|"<>@^ In addition, the name which consists of only blanks or only period (.) cannot be used. |
DWCO1132_E |
You can specify options[-toname|-ccname|-bccname] up to a number of email addresses specifies in [-to|-cc|-bcc]. |
The number of the name which is specified to [-toname|-ccname|-bccname] option is over the number of the email address or group name which is specified to [-to|-cc|-bcc] option. Specify the name whose number is within the number of the specified email address or group name. |
DWCO1133_E |
Please specify a between [{0}] and [{1}] characters. |
Check the number of characters of the division. The following contents are outputted for each parameter. {0} : The minimum number of characters of the division {1} : The maximum number of characters of the division |
DWCO1134_E |
You can specify options [-todivision|-ccdivision|-bccdivision] up to a number of email addresses specifies in [-to|-cc|-bcc]. |
The number of the division which is specified to [-todivision|-ccdivision|-bccdivision] option is over the number of the email address which is specified to [-to|-cc|-bcc] option. Specify the division whose number is within the number of the specified email address. |
DWCO1135_E |
A group name must be between [{0}] and [{1}] characters. |
Check the number of characters of the group name. The following contents are outputted for each parameter. {0} : The minimum number of characters of the group name {1} : The maximum number of characters of the group name |
DWCO1142_E |
Please specify a address type [TO|CC|BCC]. (Path:{0}, line:{1}, Value:{2}) |
The address type which was appointed in the destination file is not [TO|CC|BCC]. The following contents are outputted for each parameter. {0} : The destination file path {1} : Line {2} : The value specified as the address type |
DWCO1143_E |
Number of columns in the destination file is missing. (Path:{0}, line:{1}, Value:{2}) |
Number of columns of address which was appointed in the destination file is missing. The following contents are outputted for each parameter. {0} : The destination file path {1} : Line {2} : Number of columns |
DWCO1144_E |
An email address must be between [{0}] and [{1}] characters. (Path:{2}, line:{3}, Value:{4}) |
Check the number of characters of the email address which was appointed in the destination file. The following contents are outputted for each parameter. {0} : The minimum number of characters of the email address {1} : The maximum number of characters of the email address {2} : The destination file path {3} : Line {4} : The specified value |
DWCO1145_E |
A group name must be between [{0}] and [{1}] characters. (Path:{2}, line:{3}, Value:{4}) |
Check the number of characters of the group name which was appointed in the destination file. The following contents are outputted for each parameter. {0} : The minimum number of characters of the group name {1} : The maximum number of characters of the group name {2} : The destination file path {3} : Line {4} : The specified value |
DWCO1146_E |
Please specify a name between [{0}] and [{1}] characters. (Path:{2}, line:{3}, Value:{4}) |
Check the number of characters of the name which was appointed in the destination file. The following contents are outputted for each parameter. {0} : The minimum number of characters of the name {1} : The maximum number of characters of the name {2} : The destination file path {3} : Line {4} : The specified value |
DWCO1147_E |
A name includes restricted strings. (Path:{0}, line:{1}, Value:{2}) |
Specify the string which can be used for the name which was appointed in the destination file again. Cannot use the following symbol for the name. /\?*:|"<>@^ In addition, the name which consists of only blanks or only period (.) cannot be used. The following contents are outputted for each parameter. {0} : The destination file path {1} : Line {2} : The specified value |
DWCO1148_E |
Please specify a division between [{0}] and [{1}] characters. (Path:{2}, line:{3}, Value:{4}) |
Check the number of characters of the division which was appointed in the destination file. The following contents are outputted for each parameter. {0} : The minimum number of characters of the division {1} : The maximum number of characters of the division {2} : The destination file path {3} : Line {4} : The specified value |
DWCO1149_E |
The maximum number of email addresses/group names you can specify to [-destinationfile] is [{0}]. |
The address which was appointed in the destination file is over the maximum number of the address which can be specified. The maximum number of the address which can be specified is outputted to {0} parameter. |
DWCO1201_E |
User authentication failed. |
The user authentication for Data Highway - Server was failed. Check the User ID or Password which is defined in the Command Property File. |
DWCO1203_E |
Failed to delete log files which expires. |
The data transfer command cannot be executed because the password expires. Specify the new password. |
DWCO1207_E |
LDAP authentication system error occurred. |
An error occurred by the connection to a directory server by LDAP authentication system. |
DWCO1301_E |
Failed to receive a file/folder. A file/folder with the same name already exists in the destination folder and cannot be rewritten. (Delivery ID:{0}, File ID:{1}, Path:{2}) |
Cannot overwrite this file or folder because the same name file or folder is already existed in the specified destination folder. Check the file or folder. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : Path |
DWCO1302_E |
Failed to receive a file/folder. The saved file/folder in a temporary folder cannot be moved to the destination folder. (Delivery ID:{0}, File ID:{1}, Path:{2}) |
Cannot move the file which was saved in the temporary disk space to the specified destination folder. Check the permission of the destination folder to access. The file is saved in the temporary disk space, so move it to the destination folder. The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : Path |
DWCO1303_E |
Failed to receive a file/folder. (Delivery ID:{0}, File ID:{1}, Details:{2}) |
The following reasons are considered.
The following contents are outputted for each parameter. {0} : Delivery ID {1} : File ID {2} : Details of reason |
DWCO1304_E |
Failed to create a folder.(Path:{0}) |
Check the command has the permission to create the folder, and execute the command with the user who has the permission to create the folder. The file path is outputted to {0} parameter. |
DWCO1305_E |
Failed to create a folder because a file with the same name already exists in the destination folder.(Path:{0}) |
There is the file whose name is the same as the name of folder the command creates. Execute the command again after deleting the file. The folder path is outputted to {0} parameter. |
DWCO1401_E |
Failed to send files. (Details:{0}) |
Failed to send files. Refer to the Details reason, and improve the setting of Users, Groups and Delivery Rules. The Details reason is outputted to {0} parameter. |
DWCO1402_E |
Failed to get delivery rules. Please check the destinations. |
Failed to get the Delivery Rules which is applied all of the specified addresses. Improve the settings of the address. |
DWCO1403_E |
The capacity of selected files was over the limitation. (File path:{0}, File size:{1}Byte) |
Make the size of the sending file within the limitation of file size. The following contents are outputted for each parameter. {0} : File path of the sending file {1} : File size of the sending file |
DWCO1404_E |
The total size of specified files is over the maximum size of the delivery policy. (Total size of specified files:{0}, Maximum total size:{1}) |
Make the total size of the sending file within the limitation of total file size. The following contents are outputted for each parameter. {0} : Total size of the specified sending file {1} : Maximum total size |
DWCO1405_E |
The number of receivers is over the maximum number of the delivery policy. (Specified receivers:{0}, Maximum number of receivers:{1}) |
Make the number of the specified address within the maximum number of address. The following contents are outputted for each parameter. {0} : The number of the specified address {1} : Maximum number of address |
DWCO1406_E |
The number of files is over the maximum number of the delivery policy. (Specified files:{0}, Maximum number of files:{1}) |
Make the number of the specified sending file within the maximum number of files. The following contents are outputted for each parameter. {0} : The number of the specified sending file {1} : Maximum number of files |
DWCO1407_E |
Failed to send files. If the sender is a guest user, |
Check the execution parameter is correct. If the sender is a guest, check the Limit Number of Uses. |
DWCO1408_E |
The capacity of selected files was over the limitation.You can send each file up to 3.96 bytes when you use compress options. (File path:{0}, File size:{1}Byte) |
The capacity of selected files was over the limitation. When you use compress options, make each file size within 3.96 GB. The following contents are outputted for each parameter. {0} : File path {1} : File size |
DWCO1409_E |
Open password (-openpassword option) is needed to send to unregistered addresses. |
The open password ([-openpassword] option) is not specified. Execute the command again after specifying the open password ([-openpassword] option). |
DWCO1410_E |
The capacity of selected folder was over the limitation.You can send each folder up to 3.96 bytes. (Folder path:{0}, Folder size:{1}Byte) |
The capacity of selected folder was over the limitation. Make each folder size within 3.96 GB. The following contents are outputted for each parameter. {0} : Folder path {1} : Folder size |
DWCO1411_E |
A number of files and folders in a folder were over the limitation. You can send the number of files and folders in each folder up to {0}. (Folder path:{1}, Folder/File num:{2}). |
A number of files and folders in a folder were over the limitation. {0} : Maximum number of Folder/File {1} : Folder/File path {2} : Folder/File num |
DWCO1412_E |
The specified group does not exist or is not a group that can be sent.(Group name:{0}) |
Check the address group. The group name is outputted to {0} parameter. |
DWCO1501_I |
Log files which expires have been deleted. |
Notify that log files were deleted. |
DWCO1502_I |
Failed to delete log files which expires. |
Notify that the deletion of log files was failed. |
DWCO1705_E |
Failed to parse a XML.(Details:{0}) |
The format of the Server Parameter File is invalid. Improve the format of the file. Details reason is outputted to {0} parameter. |
DWCO1706_E |
Failed to generate a XML.(Details:{0}) |
Contact a system administrator. Details reason is outputted to {0} parameter. |
DWCO1803_E |
Failed to output information of deliveries to a XML file. (Path:{0}) |
Check the command has the permission to write the specified file. The path of XML file is outputted to {0} parameter. |
DWCO1901_E |
An unexpected error occurred. |
An unexpected error occurred. The server may be busy. Execute the command again later. If the same error occurs when you execute the command again and again, contact a technical support. And, the execution user may be deleted on executing the command. Contact a representation user or a group administrator. |
DWCO1902_E |
Unable to start the application because initialization of logs failed. |
The contents of the Log Setting File have errors. If you re-install this application, this error may be resolved. |
DWCO1903_E |
Unable to start the application because reading message files failed. |
The contents of the Setting File have errors. If you re-install this application, this error may be resolved. |
DWCO1904_E |
Unable to start the application because reading setting files failed. |
The contents of the Setting File have errors. If you re-install this application, this error may be resolved. |
DWCO1905_E |
Cannot use a temporary folder. (Path:{0}) |
The data transfer command uses the temporary folder. Check the command has the permission to write files in the temporary disk space which was described in the log. The path of the temporary folder is outputted to {0} parameter. |
DWCO1906_E |
An error occurred in connection with the server. (Details:{0}) |
Refer to the Details reason, and improve the network settings. The Details reason is outputted to {0} parameter. |
DWCO1907_E |
The server is busy. Please try again later. |
The server is busy and it returns the HTTP status code 503 (Service Unavailable). Execute the command again later. |
DWCO1908_E |
The session have been time-out. Please try again. |
The session has been timed-out. Login again. |
DWCO1909_E |
The server returned an error. (Details:{0}) |
Refer to the Details reason, and improve the setting of Users, Groups and Delivery Rules. The Details reason is outputted to {0} parameter. |
DWCO1911_E |
The operation of getting a lock for concurrent control timed out. |
The data transfer command has already been executed in the same PC. Since the data transfer command cannot be executed at the same time, execute it again after the executing data transfer command is finished. And, the command may have not the permission to write to temporary folders. Check the suitable temporary folder is specified. When the command is cooperated with JP1/DH - AJE, check the existence and writing permission of the folder which is specified at SendRecvTemp tag in the Environment Setting File (config.xml). |
DWCO1912_E |
The connection with the server for communication of a file/folder failed. The server is busy. Please try again later. |
Since the server is busy, the connection with the server for communication is failed. Execute the command again later. |
DWCO1913_E |
The server returned an error. Server does not support this command. |
The command or command option that the server does not support is used. Check support of the server. |
DWCO1999_E |
Unable to start the application. |
Failed in start of The data transfer command. Contact a system administrator. |
DWCO2201_W |
The file transfer was suspended by the server command. When the [-resumestatus] option is specified, it may be able to resume by a [RESUME] command. |
The command was suspended by the server command. When you resume the file transfer, execute the RESUME command. |
DWCO2202_E |
The file transfer was canceled by the server command. |
The command was canceled by the server command. Cannot resume the file transfer. When you want to send/receive files again, send/receive newly. |
DWCO2203_E |
The file transfer was canceled because the function of file transfer is invalid. |
Contact a system administrator, and request the permission to transfer files. |
DWCO2206_E |
Cannot specify [-resumestatus] option because the compress method is set to delivery policy. |
Specify "No compression" for Compress Level of Delivery Policy. |
DWCO2207_E |
Cannot specify [-resumestatus] option because of including folders. (Path:{0}) |
Remove any folder from the file to be sent, and specify the file again. The file path is outputted to {0} parameter. |
DWCO2221_E |
Failed to read a resuming status file. (Path:{0}) |
Check whether the resumption information file is existed and readable. The file path is outputted to {0} parameter. |
DWCO2222_E |
Failed to write a resuming status file. (Path:{0}) |
Check whether the resumption information file is existed and writable. In the case, the command may be unable to resume the sending/receiving. When the command cannot resume, send/receive newly. The file path is outputted to {0} parameter. |
DWCO2301_I |
Resuming sending files was completed. |
Resuming sending files was completed. |
DWCO2302_E |
Failed to resume sending. (Details:{0}) |
Correspond according to the Details reason. In the case, the command may be unable to resume the sending. When the command cannot resume the sending, send with the UPLOAD command newly. The Details reason is outputted to {0} parameter. |
DWCO2303_E |
Failed to resume sending because of changing the file. (Path:{0}) |
Cannot resume the sending because the file has been changed. When you want to send again, send with the UPLOAD command newly. The file path is outputted to {0} parameter. |
DWCO2304_E |
Failed to resume sending because the delivery is not exist. (Delivery ID:{0}) |
Cannot resume the sending because the delivery is not existed. Send with the UPLOAD command newly. The Delivery ID is outputted to {0} parameter. |
DWCO2305_E |
Failed to resume sending because the delivery is not send by command. (Delivery ID:{0}) |
Cannot resume the delivery which is not sent with the sending command. Send with the UPLOAD command newly. The Delivery ID is outputted to {0} parameter. |
DWCO2306_E |
Failed to resume sending.It may be that the delivery has been cancelled or the sending has already been completed. (Delivery ID:{0}) |
The sending has been canceled or completed. When you want to send again, send with the UPLOAD command newly. The Delivery ID is outputted to {0} parameter. |
DWCO2307_E |
Failed to resume sending. It may be that the delivery rule or the delivery policy is changed / deleted. |
Delivery Rules, Delivery Policy and Address User which were used at sending newly may be changed or deleted. Execute again after returning the setting of them. |
DWCO2308_E |
Failed to resume sending because the compress method is set to delivery policy. |
Specify "No compression" to Compress Level of Delivery Policy. |
DWCO2309_W |
Failed to resume sending because the previous sending process is ongoing. Please try again later. (Delivery ID:{0}) |
Cannot resume the sending because the previous sending process is ongoing on the server. Execute the command again later. The Delivery ID is outputted to {0} parameter. |
DWCO2310_E |
Failed to resume sending because the delivery was expired. (Delivery ID:{0}) |
Cannot resume the sending because the delivery was expired. When you want to send again, send with the UPLOAD command newly. The Delivery ID is outputted to {0} parameter. |
DWCO2321_I |
Resuming a receiving file was completed. |
Resuming a receiving file was completed. |
DWCO2322_E |
Failed to resume receiving. (Details:{0}) |
Correspond according to the Details reason. In the case, the command may be unable to resume the receiving. When the command cannot resume the sending, send with the UPLOAD command newly. The Details reason is outputted to {0} parameter. |
DWCO2401_E |
This operation is not permitted. Please check that a user is right. (Details:{0}) |
Execute again by a suitable user. The Details reason is outputted to {0} parameter. |