3.18.1 How to specify
Use a text editor to define each function in the definition file (ftsipversion.conf) according to the definition method described below.
Specify one definition per line in this definition file. Use a space or tab as the delimiter between a definition name and the colon (:), and as the delimiter between the colon (:) and a value. A definition name can be preceded by spaces or tabs. Any characters following a hash mark (#) through a linefeed are treated as a comment.
Definition name |
Description |
Value |
---|---|---|
Server IPv4 |
Specifies whether the FTP server uses IPv4 when accepting a connection from the FTP client. |
[ON|OFF] <<ON>> |
Server IPv6 |
Specifies whether the FTP server uses IPv6 when accepting a connection from the FTP client. |
[ON|OFF] <<OFF>> |
Client IPv4 |
Specifies whether the FTP client uses IPv4 when connecting to the FTP server. |
[ON|OFF] <<ON>> |
Client IPv6 |
Specifies whether the FTP client uses IPv6 when connecting to the FTP server. |
[ON|OFF] <<OFF>> |
Client Priority |
Specifies the Internet protocol version preferred by the FTP client when connecting to the FTP server. This definition is used for selecting the Internet protocol version to connect with in the following cases:
|
[IPv4|IPv6] <<IPv4>> |
The attributes of this definition file are shown below.
Item name |
Setting |
---|---|
File name |
ftsipversion.conf |
Directory name |
/var/opt/jp1_fts/sys |
Owner |
Superuser |
Access permission |
Owner: rw Other: r |
The following figure shows an example of this definition file: