8.2 Messages displayed in Event Viewer
The table below lists and describes the messages that can be displayed in Event Viewer.
Event ID |
Type |
Category#19 |
Description |
Notes |
---|---|---|---|---|
2 |
Error or Warning |
Log Error (107) Log Warning (109) Agent Error (113) Agent Warning (115) Server Warning (106) Client Error (101) Client Warning (103) |
|
Error and warning logs in the event of a system call error
|
3 |
Error |
Server Error (104) |
|
Error log in the event of a system call error |
4 |
Error or Warning |
Server Error (104) Server Warning (106) |
|
Error and warning logs in the event of a system call error during file transmission
|
5 |
Error |
Client Error (101) Log Error (107) Server Error (104) Agent Error (113) |
|
Error log in the event of a logical error |
6 |
Warning |
Client Warning (103) |
|
Error log in the event of a protocol error |
7 |
Error or Warning |
Client Error (101) Client Warning (103) |
|
Error log in the event of a system call error
|
8 |
Error |
Client Error (101) |
|
Error log in the event of a logical error |
9 |
Error |
Log Error (107) |
File system is full, so cannot output log. Delete unnecessary files. |
Error log when there was not enough disk space to write the log |
10 |
Warning |
Client Warning (103) Server Warning (106) |
File system is full, so cannot output trace. Delete unnecessary files. |
Warning log when there was not enough disk space to write the trace log |
11 |
Information |
Server Info (105) |
JP1/File Transmission Server/FTP Server service started. |
Information log when the server service started |
12 |
Information |
Server Info (105) |
JP1/File Transmission Server/FTP Server service terminated. |
Information log when the server service stopped |
14 |
Information |
Client Info (102) |
JP1/File Transmission Server/FTP Client service started. |
Information log when the client service started |
15 |
Information |
Client Info (102) |
JP1/File Transmission Server/FTP Client service terminated. |
Information log when the client service stopped |
17 |
Warning |
Client Warning (103) Server Warning (106) |
Log server forced to disconnect connection. |
Warning log when Log service forcibly terminated the connection |
18 |
Warning |
Server Warning (106) |
|
Warning log when the maximum number of connections was exceeded during server connection |
19 |
Information |
Log Info (108) |
JP1/File Transmission Server/FTP Log service started. |
Information log when the log service started |
20 |
Information |
Log Info (108) |
JP1/File Transmission Server/FTP Log service terminated. |
Information log when the log service stopped |
21 |
Error |
Client Error (101) Server Error (104) Log Error (107) Agent Error (113) |
Port number is not defined in the Services file.[service name for which a port number is not defined] |
Error log when the service started |
24 |
Information |
Server Info (105) |
|
Information log when transmission terminated normally |
25 |
Error |
Server Error (104) |
|
Error log when transmission terminated abnormally |
26 |
Information |
Client Info (102) |
|
Information log when transmission terminated normally |
27 |
Error |
Client Error (101) |
|
Information log when transmission terminated abnormally |
28 |
Information |
Agent Info (114) |
JP1/File Transmission Server/FTP Agent service started. |
Information log when the Operations-Manager Agent service started |
29 |
Information |
Agent Info (114) |
JP1/File Transmission Server/FTP Agent service terminated. |
Information log when the Operations-Manager Agent service ended |
30 |
Information |
Log Info (108) |
The existing log information file (history) is being copied. (FTSLOGSAVE)(#18)(Log information pointer) |
Information log when the log information file was copied |
31 |
Information |
Log Info (108) |
A new log information file (history) will now be created. (Log information pointer) |
Information log when a new log information file was created |
33 |
Information |
Server Info (105) |
|
Information log when transmission started |
34 |
Information |
Client Info (102) |
|
Information log when transmission started |
37 |
Warning |
Client Warning (103) Server Warning (106) |
|
Warning log when writing of a connection number or transmission number failed |
38 |
Error |
Client Error (101) |
|
Error log in the event of a logical error |
39 |
Information |
Log Info (108) |
The Log service and Client service were connected. |
Information log when the log service connected to client service |
40 |
Information |
Log Info (108) |
The Log service and Server service were connected. |
Information log when the log service connected to server service |
41 |
Information |
Log Info (108) |
The Log service and Client service were disconnected. |
Information log when the log service disconnected to client service |
42 |
Information |
Log Info (108) |
The Log service and Server service were disconnected. |
Information log when the log service disconnected to server service |
43 |
Error |
Client Error (101) |
|
Error log when the SSL communication error occurred |
45 |
Error |
Server Error (104) |
|
Error log when the SSL communication error occurred during file transmission |
46 |
Error |
Server Error (104) |
|
Error log when the SSL communication error occurred |
47 |
Warning |
Client Warning (103) Server Warning (106) |
File system is full, so cannot output log. Delete unnecessary files. |
Warning log when there was not enough disk space to write the log |
1001 |
Information Warning |
Backup Info (110) Backup Warning (111) |
Saved JP1/FTP settings. |
Information and warning logs when the ftssave command was used |
1002 |
Information or Warning |
Backup Info (110) Backup Warning (111) |
Recovered JP1/FTP settings. |
Error log when the ftsload command was used |
1003 |
Error |
Backup Error (112) |
Error occurred when saving JP1/FTP settings.#4 |
Error log when the ftssave command was used |
1004 |
Error |
Backup Error (112) |
Error occurred when recovering JP1/FTP settings.#4 |
Error log when the ftsload command was used |
1006 |
Error |
Backup Error (112) |
Incorrect parameter for ftssave command.#4 |
Error log when the ftssave command was used |
1007 |
Error |
Backup Error (112) |
Incorrect parameter for ftsload command.#4 |
Error log when the ftsload command was used |
- #1
-
Name of the function that contains the process resulting in the error
- #2
-
Location number in the function where the error was detected
- #3
-
Name of the function resulting in the error
- #4
-
Message indicating the nature of the error
- #5
-
Details of the error (applicable to server and client services)
- #6
-
Connection number managed by JP1/FTP
- #7
-
Name of the connected user (when the server is used)
- #8
-
IP address of the machine used by the connected user (when the server is used)
- #9
-
Transmission number managed by JP1/FTP
- #10
-
Name of the transmission file at the server (when the server is used)
- #11
-
Response message from the connection-target server
- #12
-
User name used for connection (when the client is used)
- #13
-
Host name or IP address of the connection target (when the client is used)
- #14
-
Send/receive type indicated as send (overwrite send), append (append send), or recv (receive)
- #15
-
Name of the transmission file at the client (when the client is used)
- #16
-
Name of the transmission file at the server (when the client is used)
- #17
-
Transmission card name (when the client is used)
- #18: One of the following:
-
1: The size of the log information has become smaller than the existing log information file.
2: The existing log information file has become smaller than the previous log information pointer.
3: The existing log information file is for an old version.
- #19
-
The number in parentheses is displayed.
Function name |
Error message |
Action |
---|---|---|
IMEventLoad |
The library was not found. (50) |
Install JP1/Base. |
IMEventOpenSender |
Cannot connect to the event service. (40) |
Start JP1/Base. |
Name of function resulting in error |
Function name |
Error message |
Action |
---|---|---|---|
-- |
IMEventLoad |
The library was not found. (50) |
Install JP1/Base. |
-- |
IMEventOpenSender |
Cannot connect to the event service. (40) |
Start JP1/Base. |
-- |
JpSeventOpen |
Cannot connect to the event server. (11) |
Check the status of the JP1/Base that is used as the event server. |
fts_ss_callproc |
SearchPath |
The system cannot find the file specified. (2) |
Check and, if necessary, revise Program to start when transmission ends normally (or Program to start when transmission ends abnormally) in the auto-start program settings. |
fts_ss_callproc |
CreateProcess |
Access is denied. (5) |
Check and, if necessary, revise Program to start when transmission ends normally (or Program to start when transmission ends abnormally) in the auto-start program settings. |
retrieve |
GetFileAttributes |
The system cannot find the file specified. (2) |
Check and, if necessary, revise the transmission file name at the server. |
store |
CreateFile |
Access is denied. (5) |
Check and, if necessary, revise the transmission file name at the server. |
- Legend:
-
--: There is no applicable function.
Name of function resulting in error |
Function name |
Error message |
Action |
---|---|---|---|
-- |
IMEventLoad |
The library was not found. (50) |
Install JP1/Base. |
-- |
IMEventOpenSender |
Cannot connect to the event service. (40) |
Start JP1/Base. |
-- |
gethostbyname |
Authoritative Answer Host not found. (11001) |
Check and, if necessary, revise the host name in the transmission information. |
fts_cs_callproc |
SearchPath |
The system cannot find the file specified. (2) |
Check and, if necessary, revise Program to start at normal end (or Program to start at abnormal end) in the transmission settings. |
fts_cs_callproc |
CreateProcess |
Access is denied. (5) |
Check and, if necessary, revise Program to start at normal end (or Program to start at abnormal end) in the transmission settings. |
sendrequest |
GetFileAttributes |
The system cannot find the file specified. (2) |
Check and, if necessary, revise the transmission file name at the client. |
fts_cs_recvrequest |
CreateFile |
Access is denied. (5) |
Check and, if necessary, revise the transmission file name at the client. |
- Legend:
-
--: There is no applicable function.