KNAK3480-E
An error occurred while processing was being performed for SSL communication. (maintenance information = maintenance-information)
An error occurred during processing for SSL communication between JP1/AJS3 - Web Console host and JP1/AJS3 - Manager. The probable causes are:
-
The communication encryption function is disabled at the connection destination JP1/AJS3 - Manager.
-
No root certificate is installed for the server certificate at the connection destination JP1/AJS3 - Manager.
-
The current time of the host on which an error occurred is earlier than the start time of the effective period specified in the server certificate.
-
The current time of the host on which an error occurred is later than the end time of the effective period specified in the server certificate.
-
A temporary communication error occurred.
-
Connection is restricted by JP1/AJS3 - Manager at the connection destination.
- (S)
-
Cancels processing.
- (O)
-
- If the communication encryption function is disabled at the connection destination JP1/AJS3 - Manager:
-
Enable the communication encryption function for JP1/AJS3 - Manager at the connection destination.
- If no root certificate is placed for the server certificate at the connection destination JP1/AJS3 - Manager:
-
Place a root certificate corresponding to the server certificate at the connection destination JP1/AJS3 - Manager.
- If the current time of the host on which an error occurred is earlier than the start time of the effective period specified in the server certificate:
-
Retry the operation after the start time of the effective period specified in the server certificate.
- If the current time of the host on which an error occurred is later than the end time of the effective period specified in the server certificate:
-
Replace the server certificate located on the connection destination host.
- A temporary communication error occurred:
-
Correct the cause of the error, and then retry the operation.
- If connection is restricted by JP1/AJS3 - Manager at the connection destination:
-
Add the IP address of the connecting JP1/AJS3 - Web Console host to the connection permission configuration file for the connection destination manager.