KFPS05120-W

The system is waiting for termination of the UAP or a utility.

aaaa: Unit ID for waiting for termination

bbb: Number of connected users who are waiting for termination

(S)

Continues processing. A new user cannot connect to the embedded database. Termination processing of the embedded database is delayed (15 minutes) until the UAP or utility processing terminates. When the UAP or utility processing terminates, the embedded database termination processing starts.

The system outputs detailed information about the user connected to the embedded database to the connected user information file (embedded-database-practical-directory/spool/cnctusrinf or embedded-database-practical-directory\spool\cnctusrinf). The system outputs the execution results of commands to the connected user details file (embedded-database-practical-directory/spool/cnctusrdtl or embedded-database-practical-directory\spool\cnctusrdtl).

If the UAP or utility stops before or after this message is output, the above information may not be included in the detail information for the user connected to the embedded database.

(O)

Check the connected user based on the connected user information file (embedded-database-practical-directory/spool/cnctusrinf or embedded-database-practical-directory\spool\cnctusrinf) and take action. If you cannot determine the connected user, use information output to the connected user details file (embedded-database-practical-directory/spool/cnctusrdtl or embedded-database-practical-directory\spool\cnctusrdtl) to check the connected user, and then take action.

The following shows an output example of the connected user information file.

Output example:

UNIT ID : M350(173420)
UID  PID    GID  SVID  TIME   PROGRAM
C-GRP  C-PID  C-IP
334  22118  300  fes1  173330 uap00
WS     22205  172.17.32.37

UNIT ID:

Indicates the unit ID and the time when the cnctusrinf file was created (hour, minute, and second).

UID:

Indicates the user ID of the user currently connected to the embedded database.

PID:

Indicates the process ID of the user currently connected to the embedded database.

GID:

Indicates the group ID of the user currently connected to the embedded database.

SVID:

Indicates the name of the server to which the user is connected.

Nothing might be displayed immediately after the server process of the embedded database has started.

TIME:

Indicates the time when the embedded database accepted the service request (hour, minute, and second). For a server to which the user is not connected, 999999 is displayed.

PROGRAM:

Indicates the connection process name.

• The name of a JP1/AJS3 command or process is output using 30 or fewer characters. If a command for the embedded database is executed, a name other than the name of the executed command may be displayed.

• ****** may be displayed immediately after the server process of the embedded database has started.

C-GRP:

Always blank.

C-PID:

Indicates the process ID of the client.

C-IP:

Indicates the IP address of the client.