KAVV451-E

The probable causes are:

• The AJS service has not started at the connection destination.

• When the JP1/Base settings on the connection destination specified the IP binding method on the receiving side for physical hosts, connection was attempted using an IP address that was not bound to a physical host or any logical host.

• When the connection destination was UNIX, the ajsshmdel command is not executed when the configuration of JP1/AJS3 - Manager is changed at the connection destination. Alternatively, the ajsshmdel command was executed without stopping all the JP1/AJS3 services.

• When the connection destination was Windows, all the JP1/AJS3 services were not stopped when the configuration of JP1/AJS3 - Manager was changed at the connection destination.

(S)

Cancels processing.

(O)

Correct the cause of the error, and then retry.

If connection was attempted using an IP address that was not bound to a physical host or any logical host at the connection destination, use a bound IP address to attempt connection. Alternatively, define jp1hosts or jp1hosts2 information at the connection destination. For details on the definition of jp1hosts or jp1hosts2 information, see the JP1/Base User's Guide.

If the operation during the change of the JP1/AJS3 - Manager configuration at the connection destination caused the error, take action at the connection destination according to the following procedure:

1. Stop all the running JP1/AJS3 processes (services and commands).

   When the connection destination is Windows, go to step 3.

   When the connection destination is UNIX, go to step 2.

2. Execute the ajsshmdel command.

3. Restart JP1/AJS3.