KAVU4224-E

The system failed to notify the status notification process of job execution control or of the client host of the job status. The probable causes are:

• Memory was insufficient. (reason-code = 0xe00a0002)

• The client host has stopped. (reason-code = 0xe00a0007)

• The status notification process has stopped. (reason-code = 0xe00a0007)

• For communication between the manager host and the agent host, an attempt was made to use address families that are not able to communicate with each other. (reason-code = 0xe00a0007)

  Example: Communication was attempted when the name resolution result for the manager host was an IPv4 address only and the name resolution result for the agent host on the manager host was an IPv6 address only.

• The client host name is invalid (reason-code = 0xe00a0008)

• The status notification process for the client host is starting or terminating. (reason-code = 0xe00a0009)

• The error was caused by the client host. (reason-code = 0xe00a000d)

• The communication protocol is not supported. (reason-code = 0xe00a000e)

(S)

Cancels the job status notification to the status notification process.

(O)

Use the integrated trace log to check whether a KAVUxxxx or KNACxxxx message was output before or after this message. If it was output, also see the explanation provided in that message.

If the reason code is 0xe00a000d, indicating that the error was caused by the client host, also check the integrated trace log for the client host. If no such messages were output, use the data collection tool to collect data, and then contact the system administrator. Data must be collected on both the manager host and the agent host.