KAVS3753-E

The operation cannot be performed because JP1/AJS3 has not completely stopped.

(S)

Cancels execution of the command.

(O)

The probable causes are as follows. Take the appropriate action depending on the cause.

• The JP1/AJS3 service has not stopped

  Use the jajs_spmd_status command to make sure that the JP1/AJS3 service has stopped, and then re-execute the command.

• The command was executed together with the jajs_spmd_status command

  An error might occur if you execute this command together with the jajs_spmd_status command. In this case, execute the command again.