Hitachi

JP1 Version 12 JP1/Automatic Job Management System 3 Troubleshooting

C.1 Log entries output by the scheduler services

The following table lists the types of logs output to the scheduler information log files of JP1/AJS3.

Table C‒1: Scheduler information log entries

Log entry type

Log entry name

Associated

message ID

Associated

JP1 event

Command name

Operation from JP1/AJS3 - View

Operation from JP1/AJS3 - Web Console (or API executed)

A001

Scheduler service started

KAVS0200-I

00004100

ajsstart

jajs_spmd

--

--

A002

Scheduler service terminated

KAVS0201-I

00004101

ajsstop

jajs_spmd_stop

--

--

A003

Scheduler service process terminated abnormally

KAVS0204-E

00004130

--

--

--

A007

JP1/AJS3 - View connection

KAVS0534-I

None

--

Connecting to a scheduler service

--

A008

JP1/AJS3 - View disconnection ended

KAVS0535-I

None

--

Disconnecting from a scheduler service

--

A011

Scheduler information logging started

KAVS0220-I

None

jajs_spmd

--

--

A012

Scheduler information logging terminated

KAVS0221-I

None

jajs_spmd_stop

--

--

A013

Authentication denied

KAVS1009-W

None

--

Connecting to a scheduler service

login

A016

Connection rejected by manager connection source restriction

KAVS8040-E

None

--

--

--

A017

JP1/AJS3 - Web Console connection

KAVS0570-I

None

--

--

Connecting to a scheduler service

A018

JP1/AJS3 - Web Console disconnection ended

KAVS0571-I

None

--

--

Disconnecting from a scheduler service

N001

Jobnet started

KAVS0260-I

00004102

--

--

--

N002

Jobnet ended normally

KAVS0261-I

00004103

--

--

--

N003

Jobnet ended abnormally

KAVS0262-E

00004104

--

--

--

N004

Jobnet ended with warning

KAVS0268-W

00004108

--

--

--

N005

Jobnet on hold

KAVS0270-I

00004120

--

--

--

N006

Jobnet shut down

KAVS0272-E

00004131

--

--

--

N007

KAVS0273-E

N008

Jobnet start delayed

KAVS0275-I

00004122

--

--

--

N009

Jobnet end delayed

KAVS0276-I

00004123

--

--

--

N010

Next schedule queuing

KAVS0277-I

00004124

--

--

--

N011

Jobnet start condition monitoring started

KAVS0240-I

00004140

--

--

--

N012

Jobnet start condition monitoring terminated

KAVS0241-I

00004141

--

--

--

N013

Jobnet skipped so not executed

KAVS0279-E

00004142

--

--

--

N014

All jobnet registrations canceled

KAVS0267-I

None

ajsstart -c

jajs_spmd -cold

--

--

N015

Start condition monitoring waiting to terminate

KAVS1420-I

00004145

--

--

--

N016

Waiting in accordance with the jobnet wait condition started

KAVS4950-I

00004146

--

--

--

N017

Jobnet wait condition in effect

KAVS4955-I

00004147

--

--

--

N018

Waiting in accordance with the jobnet wait condition endless

KAVS4957-E

00004148

--

--

--

J001

Job started

KAVS0263-I

00004105

--

--

--

J002

Job ended normally

KAVS0264-I

00004106

--

--

--

J003

Job ended abnormally

KAVS0265-E

00004107

--

--

--

J004

Job ended with warning

KAVS0269-W

00004109

--

--

--

J005

Job on hold

KAVS0271-I

00004121

--

--

--

J006

Job submission started

KAVS0278-I

00004125

--

--

--

J007

Event job execution request started

KAVS0242-I

00004126

--

--

--

J008

Job end delayed

KAVS0248-I

00004127

--

--

--

J009

Job queuing canceled

KAVS0266-I

0000410A

--

--

--

J010

Waiting in accordance with the job wait condition started

KAVS4951-I

0000414A

--

--

--

J011

Job wait condition in effect

KAVS4956-I

0000414B

--

--

--

J012

Waiting in accordance with the job wait condition endless

KAVS4971-E

0000414C

--

--

--

J013

Waiting for the automatic retry interval started

KAVS4675-I

00004155

--

--

--

J014

Automatic retry execution started

KAVS4676-I

00004156

--

--

--

J015

Error that disables retry execution occurred during automatic retry

KAVS4677-E

00004157

--

--

--

J016

Job submission by automatic retry started

KAVS4678-I

00004158

--

--

--

C001

Scheduler service operation environment temporarily changed

None

None

ajsalter

--

--

C002

Scheduler service stopped

None

None

ajsstop

--

--

C003

Scheduler service started

None

None

ajsstart

--

--

C101

Jobnet registered

None

None

ajsent

ry

Register for Execution, or

in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add

Register for execution

Register an execution schedule for a specified root jobnet

C102

Registered jobnet canceled

None

None

ajsleave

Cancel Registration used

Cancel registration

C103

Jobnet temporarily changed

None

None

ajsplan

Change Plan,

Change Hold Attribute,

Change Delay Monitor,

Change Priority, or

in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add

Change plan,

Change hold attribute,

Change delay monitor

Change the execution schedule for a specified jobnet

C104

Jobnet execution interrupted

None

None

ajsintrpt

Interrupt

Interrupt

C105

Jobnet rerun

None

None

ajsrerun

Rerun

Rerun

C106

Jobnet suspended/released from suspension

None

None

ajssuspend

Suspension

--

C107

Jobnet registration for execution information imported

None

None

ajsrgimport

--

--

C108

Jobnet registered by import of jobnet registration for execution information

None

None

ajsrgimport

--

--

C201

Jobnet/job forcibly ended

None

None

ajskill

Kill

Kill

C202

Job status changed

None

None

ajschgstat

Change Job Status

Change job status

C301

Unit definitions changed

None

None

ajschange

ajschgjob

ajschgnet

Changing a definition

Changing a definition

C302

Unit deleted

None

None

ajsdelete

Delete

--

C303

Unit restored

None

None

ajsrestore

Restore

--

C304

Unit created

None

None

ajsdefine

New

--

C305

Unit copied or moved

None

None

ajscopy

Paste

--

C306

Unit imported

None

None

ajsimport

--

--

C307

Jobnet released

None

None

ajsrelease -a

or

ajsrelease -c

Release Entry,

Release Cancel

--

C401

Calendar changed

None

None

ajscalendar

Changing a calendar

--

C502

Unit status displayed

None

None

ajsshow

--

--

C503

Unit definitions output

None

None

ajsprint

--

--

C504

Unit definitions backed up

None

None

ajsbackup

Backup

--

C506

Root jobnet schedule information output

None

None

ajsschedule

--

--

C507

Unit name output

None

None

ajsname

--

--

C508

Unit definitions exported

None

None

ajsexport

Package

--

C509

Unit status displayed (abnormal end)

None

None

ajsshow

--

--

C510

Unit definitions output (abnormal end)

None

None

ajsprint

--

--

C511

Unit definitions backed up (abnormal end)

None

None

ajsbackup

Backup

--

C512

Unit name output (abnormal end)

None

None

ajsname

--

--

C513

Jobnet registration for execution information exported

None

None

ajsrgexport

--

--

C514

Jobnet information output by export of jobnet registration for execution information

None

None

ajsrgexport

--

--

C515

Jobnet release information referenced

None

None

ajsrelease -i

--

--

C516

Calendar calculation

None

None

ajscalutil

--

--

I001

Command processing started

None

None

ajsalter

ajscalutil

ajsimport

ajsname

ajsprint

ajsschedule

ajsshow

ajsstart

ajsstop

--

--

ajsbackup

Backup

--

ajscalendar

Changing a calendar

--

ajschange

ajschgjob

ajschgnet

Changing a definition

Changing a definition

ajschgstat

Change Job Status

Change job status

ajscopy

Paste

--

ajsdefine

New

--

ajsdelete

Delete

--

ajsentry

Register for Execution, or

in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add

Register for execution

Register an execution schedule for a specified root jobnet

ajsexport

Package

--

ajsintrpt

Interrupt

Interrupt

ajskill

Kill

Kill

ajsleave

Cancel Registration

Cancel registration

ajsplan

Change Plan,

Change Hold Attribute,

Change Delay Monitor, or

Change Priority, or

in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add

Change plan,

Change hold attribute,

Change delay monitor

Change the execution schedul for a specified jobnet

ajsrelease

Release Entry,

Release Cancel, or

viewing release information (by selecting the jobnet related to the release in the list area)

--

ajsrerun

Rerun

Rerun

ajsrestore

Restore

--

ajsrgexport

--

--

ajsrgimport

--

--

ajssuspend

Suspension

--

I002

Command-to-scheduler service processing request started

None

None

ajschgstat

Change Job Status

Change job status

ajsentry

Register for Execution, or

in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add

Register for execution

Register an execution schedule for a specified root jobnet

ajsintrpt

Interrupt

Interrupt

ajskill

Kill

Kill

ajsleave

Cancel Registration

Cancel registration

ajsplan

Change Plan,

Change Hold Attribute,

Change Delay Monitor, or

Change Priority, or

in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add

Change plan,

Change hold attribute,

Change delay monitor

Change the execution schedule for a specified jobnet

ajsrerun

Rerun

Rerun

ajssuspend

Suspension

--
Legend:

--: Not applicable.

The formats and the items output are described below for each log entry. A Δ in the format of a log entry indicates a one-byte space.

Organization of this subsection

(1) Formats common to all log entries

The formats described below are common to all entries in the scheduler service logs.

You can select whether to include a process ID in the log information as follows.

Make the selection by using the jajs_config command to set the LOGHEADER or HOSTLOGHEADER environment setting parameter. If you do not want to include a process ID, specify none. If you want to include a process ID, specify PID.

For details about these environment setting parameters, see 20.4.2(67) LOGHEADER and 20.3.2(13) HOSTLOGHEADER in the JP1/Automatic Job Management System 3 Configuration Guide.

Table C‒2: Log entry formats with and without a process ID

Process ID setting

Log entry format

If you do not want to include a process ID, specify none in the LOGHEADER or HOSTLOGHEADER environment setting parameter.

log-numberΔdateΔtimeΔadditional-informationΔ

To include a process ID, specify PID in the LOGHEADER or HOSTLOGHEADER environment setting parameter.

log-numberΔdateΔtimeΔ[process-ID]Δadditional-informationΔ

The following table provides the details about each item in the formats.

Table C‒3: Format items common to the entries in the scheduler information logs

Item

Description

Length (bytes)

log-type

A log type (for example, A001) is output.

4

date

The date that the entry was output to the log.

The month and the day are delimited by either one or two one-byte space characters.

Examples:

- December 1: DecΔ Δ1 or DecΔ01#

- December 10: DecΔ10

If yes is specified in the AJSLOGOUTPUTYEAR or HOSTLOGOUTPUTYEAR environment setting parameter, the date is expressed in YYYY/MM/DD format.

Example:

December 7, 2009: 2009/12/07

6 or 11

time

The time that the entry was output to the log.

Hours, minutes, and seconds are delimited by one-byte colons (:). A single-digit is prefixed with 0.

Example:

Five minutes and 0 seconds after 11 p.m.: 23:05:00

8

[process-ID]

The process ID of a command or a scheduler service.

A process ID is included if PID is specified in the LOGHEADER or HOSTLOGHEADER environment setting parameter.

A process ID is not included if none is specified in the LOGHEADER or HOSTLOGHEADER environment setting parameter.

The value enclosed in square brackets is the process ID.

0 or 3 to 12

additional-information

Detailed log information.

The limit on length varies according to the log entry.
#

Whether the month and the day are separated by one space or two spaces depends on the character string generated by the ctime() function of the OS.

Cautionary notes

  • Each entry in the scheduler information log consists of one record and the length of one record is 2,048 bytes (includes two bytes for a linefeed). Therefore, if the length of the log information exceeds 2,048 bytes, only 2,048 bytes are output. The 2,049th subsequent bytes are not output.

  • When you perform an operation in JP1/AJS3 - View, multiple entries in the scheduler information log might be created for that one operation. For example, if you create a unit, the DEFINE (C304) and CHANGE (C301) log entries are output.

  • If you perform the operations described below in JP1/AJS3 - View, the CHANGE (C301) log entry is output.

    In this case, the difference between the previous definition and the new definition is not output to the log, and only spaces (Δ) are output.

    - You define a job by using a program other than JP1/AJS3 - View, you open the job in the Define Details dialog box, but change no settings, and then you click the OK button.

    - You open the Schedule Settings dialog box for a jobnet, but change no settings, and then you click the OK button.

  • If you perform the operations described below in JP1/AJS3 - Web Console, the CHANGE (C301) log entry is output.

    In this case, the difference between the previous definition and the new definition is not output to the log, and only spaces (Δ) are output.

    - You define a job by using a program other than JP1/AJS3 - Web Console, you open the job in the Define Details dialog box, but change no settings, and then you click the OK button.

To Page Top

(2) Formats of the Scheduler Service Started log entry

The following are the formats of the Scheduler Service Started log entry.

When no process ID is to be included in the log information:

A001ΔdateΔtimeΔKAVS0200-IΔscheduler-service-name

When a process ID is to be included in the log information:

A001ΔdateΔtimeΔ[process-ID]ΔKAVS0200-IΔscheduler-service-name

Example of a log entry:

A001 Dec 15 10:40:43 KAVS0200-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C‒4: Item specific to the Scheduler Service Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

To Page Top

(3) Formats of the Scheduler Service Terminated log entry

The following are the formats of the Scheduler Service Terminated log entry.

When no process ID is to be included in the log information:

A002ΔdateΔtimeΔKAVS0201-IΔscheduler-service-name

When a process ID is to be included in the log information:

A002ΔdateΔtimeΔ[process-ID]ΔKAVS0201-IΔscheduler-service-name

Example of a log entry:

A002 Dec 12 09:14:22 KAVS0201-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C‒5: Item specific to the Scheduler Service Terminated log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

To Page Top

(4) Formats of the Scheduler Service Process Terminated Abnormally log entry

The following are the formats of the Scheduler Service Process Terminated Abnormally log entry.

When no process ID is to be included in the log information:

A003ΔdateΔtimeΔKAVS0204-EΔscheduler-service-nameΔprocess-nameΔreturn-code

When a process ID is to be included in the log information:

A003ΔdateΔtimeΔ[process-ID]ΔKAVS0204-EΔscheduler-service-nameΔprocess-nameΔreturn-code

Example of a log entry:

A003 Dec 12 09:14:22 KAVS0204-E AJSROOT1 ajsschd 4

The following table describes the items that are specific to these formats.

Table C‒6: Items specific to the Scheduler Service Process Terminated Abnormally log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

process-name

One of the following is output:

- ajsflowd

- ajsschd

- ajslogd

1 to 30

return-code

A return code is recorded.

1 to 10

To Page Top

(5) Formats of the JP1/AJS3 - View Connection log entry

The following are the formats of a JP1/AJS3 - View Connection log entry.

When no process ID is to be included in the log information:

A007ΔdateΔtimeΔKAVS0534-IΔhost-nameΔ;CONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

When a process ID is to be included in the log information:

A007ΔdateΔtimeΔ[process-ID]ΔKAVS0534-IΔhost-nameΔ;CONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

Logging conditions:

A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:

  • You log in to JP1/AJS3 - Manager from JP1/AJS3 - View.

  • You select a scheduler service in the tree area in a JP1/AJS3 - View window.

  • JP1/AJS3 - View is automatically reconnected to JP1/AJS3 - Manager.

Example of a log entry:

A007 Aug 05 17:14:01 KAVS0534-I hostA ;CONNECT jp1admin [ADMIN] [10.210.38.11,JP1/AJS2-View] AJSROOT1

The following table describes the items that are specific to these formats.

Table C‒7: Items specific to the JP1/AJS3 - View Connection log entry (scheduler information log)

Item

Description

Length (bytes)

host-name

The host name of the host that was connected is output.

1 to 255

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host requested to perform the operation is output.

7 to 15

requesting-source-identification

The information for identifying the source requesting the operation is output. (JP1/AJS2-View)

13

scheduler-service-name

The name of the scheduler service connected from JP1/AJS3 - View is output.

1 to 30

To Page Top

(6) Formats of the JP1/AJS3 - View Disconnection log entry

The following are the formats of the JP1/AJS3 - View Disconnection log entry.

When no process ID is to be included in the log information:

A008ΔdateΔtimeΔKAVS0535-IΔhost-nameΔ;DISCONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

When a process ID is to be included in the log information:

A008ΔdateΔtimeΔ[process-ID]ΔKAVS0535-IΔhost-nameΔ;DISCONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

Logging conditions:

A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:

  • You exit JP1/AJS3 - View (log out from JP1/AJS3 - Manager).

  • You are unable to connect from JP1/AJS3 - View and the ajsmonsvr process terminates.

  • The length of time specified in the SESSIONTIMEOUT environment setting parameter has passed since communication with JP1/AJS3 - View was disconnected.

Example of a log entry:

A008 Dec 15 17:14:01 KAVS0535-I hostA ;DISCONNECT jp1admin [ADMIN] [10.210.38.11,JP1/AJS2-View] AJSROOT1

The following table describes the items that are specific to these formats.

Table C‒8: Items specific to the JP1/AJS3 - View Disconnection log entry (scheduler information log)

Item

Description

Length (bytes)

host-name

The host name of the host that was disconnected is output.

1 to 255

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The information for identifying the source requesting the operation is output.

7 to 15

requesting-source-identification

The name of the product used to perform the operation is output (JP1/AJS2-View).

13

scheduler-service-name

The name of the scheduler service that was disconnected is output.

1 to 30

To Page Top

(7) Formats of the Scheduler Information Logging Started log entry

The following are the formats of the Scheduler Information Logging Started log entry.

When no process ID is to be included in the log information:

A011ΔdateΔtimeΔKAVS0220-I

When a process ID is to be included in the log information:

A011ΔdateΔtimeΔ[process-ID]ΔKAVS0220-I

Logging conditions:

An entry is output to the log only if all is specified in the LOGDLOG and HLOGDLOG environment setting parameter.

Example of a log entry:

A011 Dec 15 10:51:18 KAVS0220-I

To Page Top

(8) Formats of the Scheduler Information Logging Terminated log entry

The following are the formats of the Scheduler Information Logging Terminated log entry.

When no process ID is to be included in the log information:

A012ΔdateΔtimeΔKAVS0221-I

When a process ID is to be included in the log information:

A012ΔdateΔtimeΔ[process-ID]ΔKAVS0221-I

Logging conditions:

An entry is output to the log only if all is specified in the LOGDLOG and HLOGDLOG environment setting parameter.

Example of a log entry:

A012 Dec 15 10:51:18 KAVS0221-I

To Page Top

(9) Formats of the Authentication (Login or User Mapping) Denied log entry

The following are the formats of the Authentication (Login or User Mapping) Denied log entry.

When no process ID is to be included in the log information:

A013ΔdateΔtimeΔKAVS1009-WΔrequesting-host-IP-addressΔuser-nameΔhost-name

When a process ID is to be included in the log information:

A013ΔdateΔtimeΔ[process-ID]ΔKAVS1009-WΔrequesting-host-IP-addressΔuser-nameΔhost-name

Logging conditions:

An entry is output to the log only if all is specified in the AUTHLOG environment setting parameter.

Logging for each host is output to the scheduler information log, and begins when user authentication or user mapping on JP1/Base fails during a connection with one of the following clients:

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

  • JP1/AJS3 - Manager (when a command is executed remotely or a remote jobnet is executed)

Example of a log entry:

A013 Dec 15 17:14:01 KAVS1009-W 10.210.38.11 jp1admin hostA

The following table describes the items that are specific to these formats.

Table C‒9: Items specific to an Authentication (Login or User Mapping) Denied log entry (scheduler information log)

Item

Description

Length (bytes)

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

7 to 15

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

host-name

The host name of the host that accepted the request is output.

1 to 255

To Page Top

(10) Formats of the Connection Rejected by Manager Connection Source Restriction log entry

The following are the formats of the Connection Rejected by Manager Connection Source Restriction log entry:

When no process ID is to be included in the log information:

A016ΔdateΔtimeΔKAVS8040-EΔrequesting-host-IP-addressΔuser-nameΔhost-name

When a process ID is to be included in the log information:

A016ΔdateΔtimeΔ[process-ID]ΔKAVS8040-EΔrequesting-host-IP-addressΔuser-nameΔhost-name

Logging conditions:

A log entry is output only if all is specified in the CONRESTRICTLOG environment setting parameter.

This log entry is output to the scheduler log for each host when a connection is rejected because restricting of connection sources is in effect for the manager.

Example of a log entry:

A016 Feb 28 17:14:01 KAVS8040-E 10.210.38.11 jp1admin hostA

The following table describes the items that are specific to these formats.

Table C‒10: Items specific to the Connection Rejected by Manager Connection Source Restriction log entry (scheduler information log)

Item

Description

Length (bytes)

requesting-host-IP-address

The IP address of the host that requested the operation is output.

3 to 39

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

host-name

The name of the host that received the request is output.

1 to 255

To Page Top

(11) Formats of the JP1/AJS3 - Web Console Connection log entry

The following are the formats of a JP1/AJS3 - Web Console Connection log entry.

When no process ID is to be included in the log information:

A017ΔdateΔtimeΔKAVS0570-IΔhost-nameΔ;CONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

When a process ID is to be included in the log information:

A017ΔdateΔtimeΔ[process-ID]ΔKAVS0570-IΔhost-nameΔ;CONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

Logging conditions:

A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:

  • You log in to JP1/AJS3 - Manager from the Web GUI of JP1/AJS3 - Web Console.

  • You select a scheduler service in the tree area in the Web GUI of JP1/AJS3 - Web Console.

  • JP1/AJS3 - Web Console is automatically reconnected to JP1/AJS3 - Manager.

  • You execute an API of the JP1/AJS3 - Web Console.

Example of a log entry:

A017 Aug 05 17:14:01 KAVS0570-I hostA ;CONNECT jp1admin [ADMIN] [10.210.38.11,JP1/AJS3-WEB] AJSROOT1

The following table describes the items that are specific to these formats.

Table C‒11: Items specific to the JP1/AJS3 - Web Console Connection log entry (scheduler information log)

Item

Description

Length (bytes)

host-name

The host name of the host that was connected is output.

1 to 255

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host requested to perform the operation is output.

3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. (JP1/AJS3-WEB)

11

scheduler-service-name

The name of the scheduler service connected from JP1/AJS3 - View is output.

1 to 30

To Page Top

(12) Formats of the JP1/AJS3 - Web Console Disconnection log entry

The following are the formats of the JP1/AJS3 - Web Console Disconnection log entry.

When no process ID is to be included in the log information:

A018ΔdateΔtimeΔKAVS0571-IΔhost-nameΔ;DISCONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

When a process ID is to be included in the log information:

A018ΔdateΔtimeΔ[process-ID]ΔKAVS0571-IΔhost-nameΔ;DISCONNECTΔuser-nameΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δscheduler-service-name

Logging conditions:

A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:

  • You exit JP1/AJS3 - Web Console (log out from JP1/AJS3 - Manager).

  • You are unable to connect from JP1/AJS3 - Web Console and the ajsmonsvr process terminates.

  • The length of time specified in the CDSESSIONTIMEOUT environment setting parameter has passed since communication with JP1/AJS3 - Web Console was disconnected.

  • A log entry is output if the ajscdinetd process stops during connection to JP1/AJS3 - Web Console.

Example of a log entry:

A018 Dec 15 17:14:01 KAVS0571-I hostA ;DISCONNECT jp1admin [ADMIN] [10.210.38.11,JP1/AJS3-WEB] AJSROOT1

The following table describes the items that are specific to these formats.

Table C‒12: Items specific to the JP1/AJS3 - Web Console Disconnection log entry (scheduler information log)

Item

Description

Length (bytes)

host-name

The host name of the host that was disconnected is output.

1 to 255

user-name

The name of the JP1 user who performed the operation is output.

0 to 20

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    a user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The information for identifying the source requesting the operation is output.

3 to 39

requesting-source-identification

The name of the product used to perform the operation is output (JP1/AJS3-WEB).

11

scheduler-service-name

The name of the scheduler service that was disconnected is output.

1 to 30

To Page Top

(13) Formats of the Jobnet Started log entry

The following are the formats of the Jobnet Started log entry.

When no process ID is to be included in the log information:

N001ΔdateΔtimeΔKAVS0260-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N001ΔdateΔtimeΔ[process-ID]ΔKAVS0260-IΔscheduler-service-name:jobnet-name:execution-ID #

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N001 Dec 15 17:14:01 KAVS0260-I AJSROOT1:/group/net1:@A100

The following table describes the items that are specific to these formats.

Table C‒13: Items specific to a Jobnet Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector that started is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector that started is output in @alphanumeric-character format.

1 to 10

To Page Top

(14) Formats of the Jobnet Ended Normally log entry

The following are the formats of the Jobnet Ended Normally log entry.

When no process ID is to be included in the log information:

N002ΔdateΔtimeΔKAVS0261-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N002ΔdateΔtimeΔ[process-ID]ΔKAVS0261-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N002 Dec 15 17:14:44 KAVS0261-I AJSROOT1:/group/net1:@A100

The following table describes the items that are specific to these formats.

Table C‒14: Items specific to the Jobnet Ended Normally log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector that ended is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector that ended is output in @alphanumeric-character format.

1 to 10

To Page Top

(15) Formats of the Jobnet Ended Abnormally log entry

The following are the formats of the Jobnet Ended Abnormally log entry.

When no process ID is to be included in the log information:

N003ΔdateΔtimeΔKAVS0262-EΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N003ΔdateΔtimeΔ[process-ID]ΔKAVS0262-EΔscheduler-service-name:jobnet-name:execution-ID #

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N003 Dec 01 14:05:46 KAVS0262-E AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C‒15: Items specific to the Jobnet Ended Abnormally log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector that ended abnormally is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector that ended abnormally is output in @alphanumeric-character format.

1 to 10

To Page Top

(16) Formats of the Jobnet Ended with Warning log entry

The following are the formats of the Jobnet Ended with Warning log entry.

When no process ID is to be included in the log information:

N004ΔdateΔtimeΔKAVS0268-WΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N004ΔdateΔtimeΔ[process-ID]ΔKAVS0268-WΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N004 Dec 01 14:05:46 KAVS0268-W AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C‒16: Items specific to the Jobnet Ended with Warning log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector that ended with a warning is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector that ended with a warning is output in @alphanumeric-character format.

1 to 10

To Page Top

(17) Formats of the Jobnet on Hold log entry

The following are the formats of the Jobnet on Hold log entry.

When no process ID is to be included in the log information:

N005ΔdateΔtimeΔKAVS0270-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N005ΔdateΔtimeΔ[process-ID]ΔKAVS0270-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N005 Dec 01 14:05:46 KAVS0270-I AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C‒17: Items specific to the Jobnet on Hold log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet on hold is output.

1 to 930

execution-ID

The execution ID of the jobnet on hold is output in @alphanumeric-character format.

1 to 10

To Page Top

(18) Formats of the Jobnet Shut Down log entry (N006)

The following are the formats of the Jobnet Shut Down log entry (N006).

When no process ID is to be included in the log information:

N006ΔdateΔtimeΔKAVS0272-EΔscheduler-service-name:jobnet-name:execution-ID#Δmaintenance-information

When a process ID is to be included in the log information:

N006ΔdateΔtimeΔ[process-ID]ΔKAVS0272-EΔscheduler-service-name:jobnet-name:execution-ID#Δmaintenance-information

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N006 Dec 15 09:31:39 KAVS0272-E AJSROOT1:/net1:@A100 082b4be5

The following table describes the items that are specific to these formats.

Table C‒18: Items specific to the Jobnet Shut Down log entry (N006) (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the shut-down jobnet is output.

1 to 930

execution-ID

The execution ID of the shut-down jobnet is output in @alphanumeric-character format.

1 to 10

maintenance-information

Maintenance information is output.

8

To Page Top

(19) Formats of the Jobnet Shut Down log entry (N007)

The following are the formats of the Jobnet Shut Down log entry (N007).

When no process ID is to be included in the log information:

N007ΔdateΔtimeΔKAVS0273-EΔscheduler-service-name:jobnet-name:execution-ID#Δmaintenance-information

When a process ID is to be included in the log information:

N007ΔdateΔtimeΔ[process-ID]ΔKAVS0273-EΔscheduler-service-name:jobnet-name:execution-ID#Δmaintenance-information

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N007 Dec 15 09:31:39 KAVS0273-E AJSROOT1:/net1:@A100 082b4be5

The following table describes the items that are specific to these formats.

Table C‒19: Items specific to the Jobnet Shut Down log entry (N007) (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the shut-down jobnet is output.

1 to 930

execution-ID

The execution ID of the shut-down jobnet is output in @alphanumeric-character format.

1 to 10

maintenance-information

Maintenance information is output.

8

To Page Top

(20) Formats of the Jobnet Start Delayed log entry

The following are the formats of the Jobnet Start Delayed log entry.

When no process ID is to be included in the log information:

N008ΔdateΔtimeΔKAVS0275-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N008ΔdateΔtimeΔ[process-ID]ΔKAVS0275-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N008 Dec 01 16:36:37 KAVS0275-I AJSROOT1:/group/net1:@A106

The following table describes the items that are specific to these formats.

Table C‒20: Items specific to the Jobnet Start Delayed log entry(scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet whose startup was delayed is output.

1 to 930

execution-ID

The execution ID of the jobnet whose startup was delayed is output in @alphanumeric-character format.

1 to 10

To Page Top

(21) Formats of the Jobnet End Delayed log entry

The following are the formats of the Jobnet End Delayed log entry.

When no process ID is to be included in the log information:

N009ΔdateΔtimeΔKAVS0276-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N009ΔdateΔtimeΔ[process-ID]ΔKAVS0276-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N009 Dec 01 16:36:37 KAVS0276-I AJSROOT1:/group/net1:@A106

The following table describes the items that are specific to these formats.

Table C‒21: Items specific to the Jobnet End Delayed log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet whose end was delayed is output.

1 to 930

execution-ID

The execution ID of the jobnet whose end was delayed is output in @alphanumeric-character format.

1 to 10

To Page Top

(22) Formats of the Next Schedule Queuing log entry

The following are the formats of the Next Schedule Queuing log entry.

When no process ID is to be included in the log information:

N010ΔdateΔtimeΔKAVS0277-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N010ΔdateΔtimeΔ[process-ID]ΔKAVS0277-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N010 Dec 01 16:39:37 KAVS0277-I AJSROOT1:/group/net1:@A108

The following table describes the items that are specific to these formats.

Table C‒22: Items specific to the Next Schedule Queuing log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The applicable jobnet name is output.

1 to 930

execution-ID

The applicable execution ID is output in @alphanumeric-character format.

1 to 10

To Page Top

(23) Formats of the Jobnet Start Condition Monitoring Started log entry

The following are the formats of the Jobnet Start Condition Monitoring Started log entry.

When no process ID is to be included in the log information:

N011ΔdateΔtimeΔKAVS0240-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N011ΔdateΔtimeΔ[process-ID]ΔKAVS0240-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N011 Dec 15 10:43:09 KAVS0240-I AJSROOT1:/group/net1:@A101

The following table describes the items that are specific to these formats.

Table C‒23: Items specific to the Jobnet Start Condition Monitoring Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet for which start condition monitoring started is output.

1 to 930

execution-ID

The execution ID of the jobnet for which start condition monitoring started is output in @alphanumeric-character format.

1 to 10

To Page Top

(24) Formats of the Jobnet Start Condition Monitoring Terminated log entry

The following are the formats of the Jobnet Start Condition Monitoring Terminated log entry.

When no process ID is to be included in the log information:

N012ΔdateΔtimeΔKAVS0241-IΔscheduler-service-name:jobnet-name:execution-ID#Δend-status

When a process ID is to be included in the log information:

N012ΔdateΔtimeΔ[process-ID]ΔKAVS0241-IΔscheduler-service-name:jobnet-name:execution-ID#Δend-status

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N012 Dec 01 16:36:38 KAVS0241-I AJSROOT1:/group/net1:@A101 u

The following table describes the items that are specific to these formats.

Table C‒24: Items specific to the Jobnet Start Condition Monitoring Terminated log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet for which start condition monitoring terminated is output.

1 to 930

execution-ID

The execution ID of the jobnet for which start condition monitoring terminated is output in @alphanumeric-character format.

1 to 10

end-status

One of the following is output:

u: Unmonitored + Ended

c: Monitor terminated

i: Interrupted monitoring

n: Monitor-end normal

1

To Page Top

(25) Formats of the Jobnet Skipped So Not Executed log entry

The following are the formats of the Jobnet Skipped So Not Executed log entry.

When no process ID is to be included in the log information:

N013ΔdateΔtimeΔKAVS0279-EΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N013ΔdateΔtimeΔ[process-ID]ΔKAVS0279-EΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N013 Dec 01 16:36:38 KAVS0279-E AJSROOT1:/group/net1:@A101

The following table describes the items that are specific to these formats.

Table C‒25: Items specific to the Jobnet Skipped So Not Executed log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of root jobnet name of the jobnet whose status became Skipped so not exe. is output.

1 to 930

execution-ID

The execution ID of the jobnet whose status became Skipped so not exe. is output in @alphanumeric-character format.

1 to 10

To Page Top

(26) Formats of the All Jobnet Registrations Canceled log entry

The following are the formats of the All Jobnet Registrations Canceled log entry.

When no process ID is to be included in the log information:

N014ΔdateΔtimeΔKAVS0267-IΔscheduler-service-name

When a process ID is to be included in the log information:

N014ΔdateΔtimeΔ[process-ID]ΔKAVS0267-IΔscheduler-service-name

Example of a log entry:

N014 Dec 01 16:36:38 KAVS0267-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C‒26: Item specific to the All Jobnet Registrations Canceled log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

To Page Top

(27) Formats of the Start Condition Monitoring Waiting to Terminate log entry

The following are the formats of the Start Condition Monitoring Waiting to Terminate log entry.

When no process ID is to be included in the log information:

N015ΔdateΔtimeΔKAVS1420-IΔscheduler-service-name:jobnet-name:execution-ID-of-new-generationΔexecution-ID-of-previous-generation

When a process ID is to be included in the log information:

N015ΔdateΔtimeΔ[process-ID]ΔKAVS1420-IΔscheduler-service-name:jobnet-name:execution-ID-of-new-generationΔexecution-ID-of-previous-generation

Example of a log entry:

N015 Dec 15 14:48:54 KAVS1420-I AJSROOT1:/group/net1:@A109 @A108

The following table describes the items that are specific to these formats.

Table C‒27: Items specific to the Start Condition Monitoring Waiting to Terminate log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The applicable jobnet name is output.

1 to 930

execution-ID-of-new-generation

The execution ID of the new generation is output in @alphanumeric-character format.

1 to 10

execution-ID-of-previous-generation

The execution ID of the previous generation is output in @alphanumeric-character format.

1 to 10

To Page Top

(28) Formats of the Waiting in Accordance with the Jobnet Wait Condition Started log entry

The following are the formats of the Waiting in Accordance with the Jobnet Wait Condition Started log entry.

When no process ID is to be included in the log information:

N016ΔdateΔtimeΔKAVS4950-IΔscheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:

N016ΔdateΔtimeΔ[process-ID]ΔKAVS4950-IΔscheduler-service-name:jobnet-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N016 Feb 28 17:48:54 KAVS4950-I AJSROOT1:/group/net1:@A100

The following table describes the items that are specific to these formats.

Table C‒28: Items specific to the Waiting in Accordance with the Jobnet Wait Condition Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector with the wait condition that started waiting is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector with the wait condition that started waiting is output in @alphanumeric-character format.

1 to 10

To Page Top

(29) Formats of the Jobnet Wait Condition in Effect log entry

The following are the formats of the Jobnet Wait Condition in Effect log entry.

When no process ID is to be included in the log information:

N017ΔdateΔtimeΔKAVS4955-IΔscheduler-service-name:jobnet-name:execution-ID#Δfactor-establishing-wait-condition

When a process ID is to be included in the log information:

N017ΔdateΔtimeΔ[process-ID]ΔKAVS4955-IΔscheduler-service-name:jobnet-name:execution-ID#Δfactor-establishing-wait-condition

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N017 Feb 26 18:48:54 KAVS4955-I AJSROOT1:/group/net1:@A101 2

The following table describes the items that are specific to these formats.

Table C‒29: Items specific to the Jobnet Wait Condition in Effect log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector with a wait condition that took effect is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector with a wait condition that took effect is output in @alphanumeric-character format.

1 to 10

factor-establishing-wait-condition

The value of the factor establishing the wait condition is output.

1 to 4

To Page Top

(30) Formats of the Waiting in Accordance with the Jobnet Wait Condition Endless log entry

The following are the formats of the Waiting in Accordance with the Jobnet Wait Condition Endless log entry.

When no process ID is to be included in the log information:

N018ΔdateΔtimeΔKAVS4957-EΔname-of-unit-whose-end-is-being-waited-for:execution-IDΔscheduler-service-name:jobnet-nameexecution-ID#Δwait-retention-reason

When a process ID is to be included in the log information:

N018ΔdateΔtimeΔ[process-ID]ΔKAVS4957-EΔname-of-unit-whose-end-is-being-waited-for:execution-IDΔscheduler-service-name:jobnet-name:execution-ID#Δwait-retention-reason

#

:execution-ID for scheduler-service-name:jobnet-name is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

N018 Feb 26 18:48:54 KAVS4957-E /a:@A200 AJSROOT1:/group/net1:@A101 1

The following table describes the items that are specific to these formats.

Table C‒30: Items specific to the Waiting in Accordance with the Jobnet Wait Condition Endless log entry (scheduler information log)

Item

Description

Length (bytes)

name-of-unit-whose-end-is-being-waited-for

The name of the unit whose end is being waited for, specified in the wait condition, is output.

If the wait method is set to OR, three asterisks (***) are output.

1 to 930

execution-ID-of-unit-whose-end-is-being-waited-for

The execution ID of the unit whose end is being waited for is output in @alphanumeric-character format.

If the execution ID of the unit whose end is being waited for cannot be obtained, three asterisks (***) are output.

1 to 10

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

jobnet-name

The name of the jobnet or jobnet connector with a wait condition that took effect is output.

1 to 930

execution-ID

The execution ID of the jobnet or jobnet connector with a wait condition that took effect is output in @alphanumeric-character format.

1 to 10

wait-retention-reason

The value for the factor indicating why waiting in accordance with the wait condition could not end is output.

1 to 4

To Page Top

(31) Formats of the Job Started log entry

The following are the formats of the Job Started log entry.

When no process ID is to be included in the log information:

J001ΔdateΔtimeΔKAVS0263-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name#Δjob-number#

When a process ID is to be included in the log information:

J001ΔdateΔtimeΔ[process-ID]ΔKAVS0263-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name #Δjob-number #

#

:execution-IDΔexecution-host-name Δjob-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J001 Dec 15 17:14:07 KAVS0263-I AJSROOT1:/group/net1/job1:@A100 hostA 1

The following table describes the items that are specific to these formats.

Table C‒31: Items specific to the Job Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that started is output.

1 to 930

execution-ID

The execution ID of the job that started is output in @alphanumeric-character format.

1 to 10

execution-host-name

The name of the execution host of the job that started is output.

1 to 255

job-number

The job number of the job that started is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is the machine ID and nnnnn is the job number).

1 to 10

To Page Top

(32) Formats of the Job Ended Normally log entry

The following are the formats of the Job Ended Normally log entry.

When no process ID is to be included in the log information:

J002ΔdateΔtimeΔKAVS0264-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name#Δreturn-value #Δjob-number#

When a process ID is to be included in the log information:

J002ΔdateΔtimeΔ[process-ID]ΔKAVS0264-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name #Δreturn-value#Δjob-number #

#

:execution-IDΔexecution-host-name Δreturn-valueΔjob-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J002 Dec 15 17:14:44 KAVS0264-I AJSROOT1:/group/net1/job1:@A100 hostA 0 1

The following table describes the items that are specific to these formats.

Table C‒32: Items specific to the Job Ended Normally log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that ended is output.

1 to 930

execution-ID

The execution ID of the job that ended is output in @alphanumeric-character format.

1 to 10

execution-host-name

The name of the execution host of the job that ended is output.

1 to 255

return-value

The return value of the job that ended is output as a decimal number.

1 to 10

job-number

The job number of the job that ended is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

1 to 10

To Page Top

(33) Formats of the Job Ended Abnormally log entry

The following are the formats of the Job Ended Abnormally log entry.

When no process ID is to be included in the log information:

J003ΔdateΔtimeΔKAVS0265-EΔscheduler-service-name:job-name:execution-ID#Δend-statusΔreturn-valueΔexecution-host-name#Δjob-number#

When a process ID is to be included in the log information:

J003ΔdateΔtimeΔ[process-ID]ΔKAVS0265-EΔscheduler-service-name:job-name:execution-ID#Δend-statusΔreturn-valueΔexecution-host-name #Δjob-number #

#

:execution-ID and Δexecution-host-name Δjob-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J003 Dec 01 14:05:45 KAVS0265-E AJSROOT1:/net1/nestnet1/job1:@A111 a 99 hostA 5

The following table describes the items that are specific to these formats.

Table C‒33: Items specific to the Job Ended Abnormally log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that ended abnormally is output.

1 to 930

execution-ID

The execution ID of the job that ended abnormally is output in @alphanumeric-character format.

1 to 10

end-status

One of the following is output:

- a: Ended abnormally

- f: Failed to start

- c: Killed

- ?: Unknown end status

1

return-value

The return value of the job that ended abnormally is output as a decimal number.

1 to 10

execution-host-name

The name of the execution host of the job that ended abnormally is output.

1 to 255

job-number

The job number of the job that ended abnormally is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

If the job could not be started because submission of the job failed, the job number is blank.

1 to 10

To Page Top

(34) Formats of the Job Ended with Warning log entry

The following are the formats of the Job Ended with Warning log entry.

When no process ID is to be included in the log information:

J004ΔdateΔtimeΔKAVS0269-WΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name#Δjob-number#

When a process ID is to be included in the log information:

J004ΔdateΔtimeΔ[process-ID]ΔKAVS0269-WΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name #Δjob-number #

#

:execution-ID and Δexecution-host-name Δjob-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J004 Dec 01 14:05:45 KAVS0269-W AJSROOT1:/net1/nestnet1/job1:@A111 99 hostA 5

The following table describes the items that are specific to these formats.

Table C‒34: Items specific to the Job Ended with Warning log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that ended with a warning is output.

1 to 930

execution-ID

The execution ID of the job that ended with a warning is output in @alphanumeric-character format.

1 to 10

return-value

The return value of the job that ended with a warning is output as a decimal number.

1 to 10

execution-host-name

The name of the execution host of the job that ended with a warning is output.

1 to 255

job-number

The job number of the job that ended with a warning is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

1 to 10

To Page Top

(35) Formats of the Job on Hold log entry

The following are the formats of the Job on Hold log entry.

When no process ID is to be included in the log information:

J005ΔdateΔtimeΔKAVS0271-IΔscheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:

J005ΔdateΔtimeΔ[process-ID]ΔKAVS0271-IΔscheduler-service-name:job-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J005 Dec 01 14:05:45 KAVS0271-I AJSROOT1:/net1/nestnet1/job1:@A111

The following table describes the items that are specific to these formats.

Table C‒35: Items specific to the Job on Hold log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job on hold is output.

1 to 930

execution-ID

The execution ID of the job on hold is output in @alphanumeric-character format.

1 to 10

To Page Top

(36) Formats of the Job Submission Started log entry

The following are the formats of the Job Submission Started log entry.

When no process ID is to be included in the log information:

J006ΔdateΔtimeΔKAVS0278-IΔscheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:

J006ΔdateΔtimeΔ[process-ID]ΔKAVS0278-IΔscheduler-service-name:job-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J006 Dec 15 17:14:01 KAVS0278-I AJSROOT1:/group/net1/job1:@A100

The following table describes the items that are specific to these formats.

Table C‒36: Items specific to the Job Submission Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the submitted job is output.

1 to 930

execution-ID

The execution ID of the submitted job is output in @alphanumeric-character format.

1 to 10

To Page Top

(37) Formats of the Event Job Execution Request Started log entry

The following are the formats of the Event Job Execution Request Started log entry.

When no process ID is to be included in the log information:

J007ΔdateΔtimeΔKAVS0242-IΔscheduler-service-name:event-job-name:execution-ID#

When a process ID is to be included in the log information:

J007ΔdateΔtimeΔ[process-ID]ΔKAVS0242-IΔscheduler-service-name: event-job-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J007 Dec 15 17:14:01 KAVS0242-I AJSROOT1:/group/net1/evjob1:@A100

The following table describes the items that are specific to these formats.

Table C‒37: Items specific to the Event Job Execution Request Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

event-job-name

The applicable event job name is output.

1 to 930

execution-ID

The execution ID of the event job is output in @alphanumeric-character format.

1 to 10

To Page Top

(38) Formats of the Job End Delayed log entry

The following are the formats of the Job End Delayed log entry.

When no process ID is to be included in the log information:

J008ΔdateΔtimeΔKAVS0248-IΔscheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:

J008ΔdateΔtimeΔ[process-ID]ΔKAVS0248-IΔscheduler-service-name: job-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J008 Dec 01 16:36:37 KAVS0248-I AJSROOT1:/group/net1/job1:@A106

The following table describes the items that are specific to these formats.

Table C‒38: Items specific to the Job End Delayed log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job whose end was delayed is output.

1 to 930

execution-ID

The execution ID of the job whose end was delayed is output in @alphanumeric-character format.

1 to 10

To Page Top

(39) Formats of the Job Queuing Canceled log entry

The following are the formats of the Job Queuing Canceled log entry.

When no process ID is to be included in the log information:

J009ΔdateΔtimeΔKAVS0266-IΔscheduler-service-name:job-name:execution-ID#Δjob-number#

When a process ID is to be included in the log information:

J009ΔdateΔtimeΔ[process-ID]ΔKAVS0266-IΔscheduler-service-name:job-name:execution-ID#Δjob-number #

#

:execution-IDΔjob-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J009 Dec 01 16:36:37 KAVS0266-I AJSROOT1:/group/net1/job1:@A100 1

The following table describes the items that are specific to these formats.

Table C‒39: Items specific to the Job Queuing Canceled log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that ended is output.

1 to 930

execution-ID

The execution ID of the job that ended is output in @alphanumeric-character format.

1 to 10

job-number

The job number of the job that ended is output as a decimal number.

1 to 10

To Page Top

(40) Formats of the Waiting in Accordance with the Job Wait Condition Started log entry

The following are the formats of the Waiting in Accordance with the Job Wait Condition Started log entry.

When no process ID is to be included in the log information:

J010ΔdateΔtimeΔKAVS4951-IΔscheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:

J010ΔdateΔtimeΔ[process-ID]ΔKAVS4951-IΔscheduler-service-name:job-name:execution-ID#

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J010 Mar 28 14:48:54 KAVS4951-I AJSROOT1:/group/net1/job1:@A111

The following table describes the items that are specific to these formats.

Table C‒40: Items specific to the Waiting in Accordance with the Job Wait Condition Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job with a wait condition that started waiting is output.

1 to 930

execution-ID

The execution ID of the job with a wait condition that started waiting is output in @alphanumeric-character format.

1 to 10

To Page Top

(41) Formats of the Job Wait Condition in Effect log entry

The following are the formats of the Job Wait Condition in Effect leg entry.

When no process ID is to be included in the log information:

ΔdateΔtimeΔKAVS4956-IΔscheduler-service-name:job-name:execution-ID#Δfactor-establishing-wait-condition

When a process ID is to be included in the log information:

J011ΔdateΔtimeΔ[process-ID]ΔKAVS4956-IΔscheduler-service-name:job-name:execution-ID#Δfactor-establishing-wait-condition

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J011 Mar 26 18:48:54 KAVS4956-I AJSROOT1:/group/net1/job1:@A111 2

The following table describes the items that are specific to these formats.

Table C‒41: Items specific to the Job Wait Condition in Effect log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job with a wait condition that took effect is output.

1 to 930

execution-ID

The execution ID of the job with a wait condition that took effect is output in @alphanumeric-character format.

1 to 10

factor-establishing-wait-condition

The value of the factor establishing the wait condition is output.

1 to 4

To Page Top

(42) Formats of the Waiting in Accordance with the Job Wait Condition Endless log entry

The following are the formats of the Waiting in Accordance with the Job Wait Condition Endless log entry.

When no process ID is to be included in the log information:

J012ΔdateΔtimeΔKAVS4971-EΔname-of-unit-whose-end-is-being-waited-for:execution-IDΔscheduler-service-name:job-name:execution-ID#Δwait-retention-reason

When a process ID is to be included in the log information:

J012ΔdateΔtimeΔ[process-ID]ΔKAVS4971-EΔname-of-unit-whose-end-is-being-waited-for:execution-IDΔscheduler-service-name:job-name:execution-ID#Δwait-retention-reason

#

:execution-ID for scheduler-service-name:job-name is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J012 Mar 26 18:48:54 KAVS4971-E /a:@A200 AJSROOT1:/group/net1/job1:@A111 2

The following table describes the items that are specific to these formats.

Table C‒42: Items specific to the Waiting in Accordance with the Job Wait Condition Endless log entry (scheduler information log)

Item

Description

Length (bytes)

name-of-unit-whose-end-is-being-waited-for

The name of the unit whose end is being waited for specified in the wait condition is output.

If the wait method is set to OR, three asterisks (***) are output.

1 to 930

execution-ID-of-unit-whose-end-is-being-waited-for

The execution ID of the unit whose end is being waited for is output in @alphanumeric-character format.

If the execution ID of the unit whose end is being waited for cannot be obtained, three asterisks (***) are output.

1 to 10

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job with a wait condition that took effect is output.

1 to 930

execution-ID

The execution ID of the job with a wait condition that took effect is output in @alphanumeric-character format.

1 to 10

wait-retention-reason

The value for the factor indicating why waiting in accordance with the wait condition could not end is output.

1 to 4

To Page Top

(43) Formats of the Waiting for Automatic Retry Interval Started log entry

The following are the formats of the Waiting for the Automatic Retry Interval Started log entry.

When no process ID is to be included in the log information:

J013ΔdateΔtimeΔKAVS4675-IΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name#Δjob-number#Δnumber-of-retry-executions

When a process ID is to be included in the log information:

J013ΔdateΔtimeΔ[process-ID]ΔKAVS4675-IΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name#Δjob-number#Δnumber-of-retry-executions

#

:execution-ID and Δexecution-host-name Δjob-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J013 Mar 03 14:05:45 KAVS4675-I AJSROOT1:/net1/nestnet1/job1:@A111 99 hostA 5 3

The following table describes the items that are specific to these formats.

Table C‒43: Items specific to the Waiting for the Automatic Retry Interval Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job that starts waiting for the retry interval is output.

1 to 930

execution-ID

The execution ID of the job that starts waiting for the retry interval is output in @alphanumeric-character format.

1 to 10

return-value

The return value of the job that starts waiting for the retry interval is output as a decimal number.

1 to 10

execution-host-name

The name of the execution host of the job that starts waiting for the retry interval is output.

1 to 255

job-number

The job number of the job that starts waiting for the retry interval is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

If the job could not be started because submission of the job failed, the job number is blank.

1 to 10

number-of-retry-executions

The number of retry executions for the job that starts waiting for the retry interval is output as a decimal number.

1 to 2

To Page Top

(44) Formats of the Automatic Retry Execution Started log entry

The following are the formats of the Automatic Retry Execution Started log entry.

When no process ID is to be included in the log information:

J014ΔdateΔtimeΔKAVS4676-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name#Δjob-number#Δnumber-of-retry-executions

When a process ID is to be included in the log information:

J014ΔdateΔtimeΔ[process-ID]ΔKAVS4676-IΔscheduler-service-name:job-name:execution-ID#Δexecution-host-name#Δjob-number#Δnumber-of-retry-executions

#

:execution-IDΔexecution-host-name Δjob-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J014 Feb 28 17:14:07 KAVS4676-I AJSROOT1:/group/net1/job1:@A100 hostA 1 3

The following table describes the items that are specific to these formats.

Table C‒44: Items specific to the Automatic Retry Execution Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job whose execution is started by automatic retry is output.

1 to 930

execution-ID

The execution ID of the job whose execution is started by automatic retry is output in @alphanumeric-character format.

1 to 10

execution-host-name

The name of the execution host of the job whose execution is started by automatic retry is output.

1 to 255

job-number

The job number of the job whose execution is started by automatic retry is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

1 to 10

number-of-retry-executions

The number of retry executions for the job whose execution is started by automatic retry is output as a decimal number.

1 to 2

To Page Top

(45) Formats of the Error That Disables Retry Execution Occurring During Automatic Retry log entry

The following are the formats of the Error That Disables Retry Execution Occurring During Automatic Retry log entry.

When no process ID is to be included in the log information:

J015ΔdateΔtimeΔKAVS4677-EΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name#Δjob-number#Δnumber-of-retry-executionsΔreason-code

When a process ID is to be included in the log information:

J015ΔdateΔtimeΔ[process-ID]ΔKAVS4677-EΔscheduler-service-name:job-name:execution-ID#Δreturn-valueΔexecution-host-name#Δjob-number#Δnumber-of-retry-executionsΔreason-code

#

:execution-ID and Δexecution-host-name Δjob-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J015 Mar 03 14:05:45 KAVS4677-E AJSROOT1:/net1/nestnet1/job1:@A111 99 hostA 5 3 FATALERR

The following table describes the items that are specific to these formats.

Table C‒45: Items specific to the Error That Disables Retry Execution Occurring During Automatic Retry log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job for which automatic retry ended due to an error that disables retry execution is output.

1 to 930

execution-ID

The execution ID of the job for which automatic retry ended due to an error that disables retry execution is output in @alphanumeric-character format.

1 to 10

return-value

The return value of the job for which automatic retry ended due to an error that disables retry execution is output as a decimal number.

1 to 10

execution-host-name

The name of the execution host of the job for which automatic retry ended due to an error that disables retry execution is output.

1 to 255

job-number

The job number of the job for which automatic retry ended due to an error that disables retry execution is output as a decimal number.

If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).

If the job could not be started because submission of the job failed, the job number is blank.

1 to 10

number-of-retry-executions

The number of retry executions for the job for which automatic retry ended due to an error that disables retry execution is output as a decimal number.

1 to 2

reason-code

The reason for ending automatic retry is output.

  • FATALERR

    The job ended in an end status that does not allow a retry.

  • ERRCODE

    The executable file or script file ended with a return code that is outside the scope of automatic retry.

  • RETRYNUM

    The number of retry executions reached the maximum number of retry executions.

7 or 8

To Page Top

(46) Formats of the Job Submission by Automatic Retry Started log entry

The following are the formats of the Job Submission by Automatic Retry Started log entry.

When no process ID is to be included in the log information:

J016ΔdateΔtimeΔKAVS4678-IΔscheduler-service-name:job-name:execution-ID#Δnumber-of-retry-executions

When a process ID is to be included in the log information:

J016ΔdateΔtimeΔ[process-ID]ΔKAVS4678-IΔscheduler-service-name:job-name:execution-ID#Δnumber-of-retry-executions

#

:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:

J016 Feb 28 17:14:01 KAVS4678-I AJSROOT1:/group/net1/job1:@A100 3

The following table describes the items that are specific to these formats.

Table C‒46: Items specific to the Job Submission by Automatic Retry Started log entry (scheduler information log)

Item

Description

Length (bytes)

scheduler-service-name

The applicable scheduler service name is output.

1 to 30

job-name

The name of the job submitted by automatic retry is output.

1 to 930

execution-ID

The execution ID of the job submitted by automatic retry is output in @alphanumeric-character format.

1 to 10

number-of-retry-executions

The number of retry executions for the job submitted by automatic retry is output as a decimal number.

1 to 2

To Page Top

(47) Formats of the Scheduler Service Operation Environment Temporarily Changed log entry

The following are the formats of the Scheduler Service Operation Environment Temporarily Changed log entry.

When no process ID is to be included in the log information:

C001ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;ALTERΔoption

When a process ID is to be included in the log information:

C001ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;ALTERΔoption

Logging conditions:

An entry is output to the log only if all or alter is specified in the OPELOG environment setting parameter.

Example of a log entry:

C001 Dec 15 09:51:41 jp1admin 0 JP1_DEFAULT ;ALTER -F AJSROOT1 -c COPY

The following table describes the items that are specific to these formats.

Table C‒47: Items specific to the Scheduler Service Operation Environment Temporarily Changed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsalter command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

option

The options specified in the executed ajsalter command are output.

1 or more

To Page Top

(48) Formats of the Scheduler Service Stopped log entry

The following are the formats of the Scheduler Service Stopped log entry.

When no process ID is to be included in the log information:

C002ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;STOPΔoption

When a process ID is to be included in the log information:

C002ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;STOPΔoption

Logging conditions:

An entry is output to the log only if all or stop is specified in the OPELOG environment setting parameter.

Example of a log entry:

C002 Dec 15 09:53:08 jp1admin 0 JP1_DEFAULT ;STOP -F AJSROOT1 -w -c

The following table describes the items that are specific to these formats.

Table C‒48: Items specific to the Scheduler Service Stopped log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsstop command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

option

The options specified in the executed ajsstop command are output.

1 or more

To Page Top

(49) Formats of the Scheduler Service Started log entry

The following are the formats of the Scheduler Service Started log entry.

When no process ID is to be included in the log information:

C003ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;STARTΔoption

When a process ID is to be included in the log information:

C003ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;STARTΔoption

Logging conditions:

An entry is output to the log only if all or start is specified in the OPELOG environment setting parameter.

Example of a log entry:

C003 Dec 07 19:26:59 jp1admin 0 JP1_DEFAULT ;START -F AJSROOT1 -w -o

The following table describes the items that are specific to these formats.

Table C‒49: Items specific to the Scheduler Service Started log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsstart command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

option

The options specified in the executed ajsstart command are output.

1 to 500

To Page Top

(50) Formats of the Jobnet Registered log entry

The following are the formats of the Jobnet Registered log entry.

When no process ID is to be included in the log information:

C101ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;ENTRYΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C101ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;ENTRYΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or entry is specified in the OPELOG environment setting parameter.

Example of a log entry:

C101 Dec 15 10:51:18 jp1admin KAVS0681-E JP1_DEFAULT ;ENTRY -F AJSROOT1 -s /group/net1

The following table describes the items that are specific to these formats.

Table C‒50: Items specific to the Jobnet Registered log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsentry command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsentry command are output.

If the yes is specified for the AJSLOGOUTPUTEXTEND environment setting parameter, the value of the -c option is output.

1 to 500

unit-name

The unit name specified in the executed ajsentry command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(51) Formats of the Registered Jobnet Canceled log entry

The following are the formats of the Registered Jobnet Canceled log entry.

When no process ID is to be included in the log information:

C102ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;LEAVEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C102ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;LEAVEΔ[user-type] #Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or leave is specified in the OPELOG environment setting parameter.

Example of a log entry:

C102 Dec 01 14:03:14 jp1admin 0 JP1_DEFAULT ;LEAVE -F AJSROOT1 -B all /net1

The following table describes the items that are specific to these formats.

Table C‒51: Items specific to the Registered Jobnet Canceled log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsleave command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsleave command are output.

1 to 500

unit-name

The unit name specified in the executed ajsleave command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(52) Formats of the Jobnet Temporarily Changed log entry

The following are the formats of the Jobnet Temporarily Changed log entry.

When no process ID is to be included in the log information:

C103ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;PLANΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C103ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;PLANΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or plan is specified in the OPELOG environment setting parameter.

Example of a log entry:

C103 Dec 15 09:55:10 jp1admin 0 JP1_DEFAULT ;PLAN -F AJSROOT1 -r -X auto /net1

The following table describes the items that are specific to these formats.

Table C‒52: Items specific to the Jobnet Temporarily Changed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsplan command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsplan command are output.

1 to 500

unit-name

The unit name specified in the executed ajsplan command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(53) Formats of the Jobnet Execution Interrupted log entry

The following are the formats of the Jobnet Execution Interrupted log entry.

When no process ID is to be included in the log information:

C104ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;INTRPTΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C104ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;INTRPTΔ[user-type] #Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or intrpt is specified in the OPELOG environment setting parameter.

Example of a log entry:

C104 Dec 15 09:56:36 jp1admin 0 JP1_DEFAULT ;INTRPT -F AJSROOT1 -X auto /net1

The following table describes the items that are specific to these formats.

Table C‒53: Items specific to the Jobnet Execution Interrupted log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsintrpt command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsintrpt command are output.

1 to 500

unit-name

The unit name specified in the executed ajsintrpt command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(54) Formats of the Jobnet Rerun log entry

The following are the formats of the Jobnet Rerun log entry.

When no process ID is to be included in the log information:

C105ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RERUNΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C105ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RERUNΔ[user-type] #Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or rerun is specified in the OPELOG environment setting parameter.

Example of a log entry:

C105 Dec 07 16:36:47 jp1admin KAVS0141-E JP1_DEFAULT ;RERUN -F AJSROOT1 -t -X no /group/net1:@A118

The following table describes the items that are specific to these formats.

Table C‒54: Items specific to the Jobnet Rerun log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrerun command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsrerun command are output.

1 to 500

unit-name

The unit name specified in the executed ajsrerun command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(55) Formats of the Jobnet Suspended/Released from Suspension log entry

The following are the formats of the Jobnet Suspended/Released from Suspension log entry.

When no process ID is to be included in the log information:

C106ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;SUSPENDΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C106ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;SUSPENDΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or suspend is specified in the OPELOG environment setting parameter.

Example of a log entry:

C106 Dec 07 16:36:14 jp1admin 0 JP1_DEFAULT ;SUSPEND -F AJSROOT1 -C -r /group/net1

The following table describes the items that are specific to these formats.

Table C‒55: Items specific to the Jobnet Suspended/Released from Suspension log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajssuspend command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajssuspend command are output.

1 to 500

unit-name

The unit name specified in the executed ajssuspend command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(56) Formats of the Jobnet Registration for Execution Information Imported log entry

The following are the formats of the Jobnet Registration for Execution Information Imported log entry.

When no process ID is to be included in the log information:

C107ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RGIMPΔ[user-type]#Δoption

When a process ID is to be included in the log information:

C107ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RGIMPΔ[user-type]#Δoption

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or rgimport is specified in the OPELOG environment setting parameter.

Example of a log entry:

C107 Dec 07 19:14:15 jp1admin KAVS0681-E JP1_DEFAULT ;RGIMP -F AJSROOT1 -i c:\temp\entry_info.txt

The following table describes the items that are specific to these formats.

Table C‒56: Items specific to the Jobnet Registration for Execution Information Imported log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrgimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsrgimport command are output.

1 to 500
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(57) Formats of the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry

The following are the formats of the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry.

When no process ID is to be included in the log information:

C108ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RGIMPΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C108ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RGIMPΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or rgimport is specified in the OPELOG environment setting parameter.

Example of a log entry:

C108 Dec 07 19:14:15 jp1admin KAVS4832-E JP1_DEFAULT ;RGIMP -F AJSROOT1 /group/net1

The following table describes the items that are specific to these formats.

Table C‒57: Items specific to the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrgimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options that are output are the ones specified in the ajsrgimport command when the command was used to register the jobnet.

1 to 500

unit-name

The root jobnet name that is output is name actually registered by using the ajsrgimport command.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(58) Formats of the Jobnet/Job Forcibly Ended log entry

The following are the formats of the Jobnet/Job Forcibly Ended log entry.

When no process ID is to be included in the log information:

C201ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;KILLΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C201ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;KILLΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or kill is specified in the OPELOG environment setting parameter.

Example of a log entry:

C201 Dec 07 19:14:15 jp1admin KAVS0129-E JP1_DEFAULT ;KILL -F AJSROOT1 -X no /group/net1:@A137

The following table describes the items that are specific to these formats.

Table C‒58: Items specific to the Jobnet/Job Forcibly Ended log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajskill command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajskill command are output.

1 to 500

unit-name

The unit name specified in the executed ajskill command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(59) Formats of the Job Status Changed log entry

The following are the formats of the Job Status Changed log entry.

When no process ID is to be included in the log information:

C202ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;CHGSTATΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C202ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;CHGSTATΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or chgst is specified in the OPELOG environment setting parameter.

Example of a log entry:

C202 Dec 15 09:58:13 jp1admin 0 JP1_DEFAULT ;CHGSTAT -F AJSROOT1 -t normal -X auto /net1/job

The following table describes the items that are specific to these formats.

Table C‒59: Items specific to the Job Status Changed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajschgstat command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajschgstat command are output.

1 to 500

unit-name

The unit name specified in the executed ajschgstat command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(60) Formats of the Unit Definitions Changed log entry

The following are the formats of the Unit Definitions Changed log entry.

When no process ID is to be included in the log information:

C301ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;CHANGEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C301ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;CHANGEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification]#ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]Δoption is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or change is specified in the OPELOG environment setting parameter.

Logging example for commands:
When Monthly Jobnet is specified as the comment and 10 is specified as the number of saved generations:

C301 Dec 07 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [CHANGE] -F AJSROOT1 -C "Monthly Jobnet" -l "10" /net

Logging examples for JP1/AJS3 - View:
When c:\user\pgm.exe is specified as the execution file name and 1 is specified as the execution priority:

C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] pr=1; sc="c:\user\pgm.exe"; AJSROOT1:/net/job

When the execution file name is blank and None (default) is specified as the execution priority:

C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] pr=; sc=; AJSROOT1:/net/job

When schedule rule 1 is copied to create schedule rule 2:

C301 Dec 07 13:59:30 jp1admin 0 JP1_DEFAULT ; CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] sd; st; cy; sh; shd; AJSROOT1:/net

For the parameters listed below, the difference between the new and previous definitions cannot be extracted because the number of parameters that can be specified and parameter lengths are variable. Accordingly, only the names of the applicable parameters are recorded in the log entry.

sd, st, sy, ey, ln, cy, sh, shd, wt, wc, cftd, el, ar, env, evwfr, jpoif, mladr, mlsbj, mltxt, mlatf, lftpd, lffnm, lfmks, hlsh, hleh

Note that if only the sequence of the parameters is changed (the definitions of the parameters do not change), the difference in the sequence is not output, although the Unit Definitions Changed log entry is still output to the file.

Logging examples for JP1/AJS3 - Web Console:
When c:\user\pgm.exe is specified as the execution file name and 1 is specified as the execution priority:

C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS3-WEB] [WEB] pr=1; sc="c:\user\pgm.exe"; AJSROOT1:/net/job

When the execution file name is blank and None (default) is specified as the execution priority:

C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS3-WEB] [WEB] pr=; sc=; AJSROOT1:/net/job

For the parameter listed below, the difference between the new and previous definitions cannot be extracted because the number of parameters that can be specified and parameter lengths are variable. Accordingly, only the names of the applicable a parameter are recorded in the log entry.

env

Note that if only the sequence of the parameters is changed (the definitions of the parameters do not change), the difference in the sequence is not output, although the Unit Definitions Changed log entry is still output to the file.

The following table describes the items that are specific to these formats.

Table C‒60: Items specific to the Unit Definitions Changed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajschange, ajschgjob, or ajschgnet command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajschange, ajschgnet, or ajschgjob command, or the changes made by a user from JP1/AJS3 - View or JP1/AJS3 - Web Console are output.

For 08-00 or earlier, command options are not output.

For 08-10 or later, command options or the changes made by the user from JP1/AJS3 - View are output if yes is specified in AJSLOGOUTPUTEXTEND.

In option, the type of the definition change operation and then the options of the applicable command or the changes made by the user from JP1/AJS3 - View are output.

The definition change operation types are as follows:

  • For ajschange: CHANGE

  • For ajschgnet: CHGNET

  • For ajschgjob: CHGJOB

  • For JP1/AJS3 - View: VIEW

  • For JP1/AJS3 - Web Console: WEB

1 to 510

unit-name

The unit name specified in the executed ajschange, ajschgnet, or ajschgjob command, or the name of the unit for which operations were performed from JP1/AJS3 - View or JP1/AJS3 - Web Console is output.

For the ajschange, ajschgnet, and ajschgjob commands, unit names do not include scheduler service names. However, if the target is a scheduler service, the indication in option is -f scheduler-service-name. For JP1/AJS3 - View or JP1/AJS3 - Web Console, unit names include scheduler service names.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) or the value of the parameter to be changed (the part that is not the parameter name and the subsequent one-byte equal sign (=)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options or parameters exceeds 500 bytes, only 500 bytes are output. Note that the 500-byte limit is exceeded before an option name or a parameter name is complete, that option or parameter is not output.

To Page Top

(61) Formats of the Unit Deleted log entry

The following are the formats of the Unit Deleted log entry.

When no process ID is to be included in the log information:

C302ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;DELETEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C302ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;DELETEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or delete is specified in the OPELOG environment setting parameter.

Example of a log entry:

C302 Dec 07 12:25:43 jp1admin 0 JP1_DEFAULT ;DELETE -F AJSROOT1 -S /group/net1

The following table describes the items that are specific to these formats.

Table C‒61: Items specific to the Unit Deleted log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsdelete command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsdelete command are output.

1 to 500

unit-name

The unit name specified in the executed ajsdelete command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(62) Formats of the Unit Restored log entry

The following are the formats of the Unit Restored log entry.

When no process ID is to be included in the log information:

C303ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RESTOREΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C303ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RESTOREΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or restore is specified in the OPELOG environment setting parameter.

Example of a log entry:

C303 Dec 07 10:00:22 jp1admin 0 JP1_DEFAULT ;RESTORE -F AJSROOT1 -e -n box

The following table describes the items that are specific to these formats.

Table C‒62: Items specific to the Unit Restored log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrestore command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsrestore command are output.

1 to 500

unit-name

The unit name specified in the executed ajsrestore command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(63) Formats of the Unit Created log entry

The following are the formats of the Unit Created log entry.

When no process ID is to be included in the log information:

C304ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;DEFINEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C304ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;DEFINEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or define is specified in the OPELOG environment setting parameter.

Example of a log entry:

C304 Dec 07 14:00:46 jp1admin 0 JP1_DEFAULT ;DEFINE -F AJSROOT1 /net1

The following table describes the items that are specific to these formats.

Table C‒63: Items specific to the Unit Created log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsdefine command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsdefine command are output only for an abnormal termination.

1 to 500

unit-name or definition file name

The unit name or the definition file name specified in the executed ajsdefine command is output.

The unit name is output for a normal termination.

The definition file name is output for an abnormal termination.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(64) Formats of the Unit Copied or Moved log entry

The following are the formats of the Unit Copied or Moved log entry.

When no process ID is to be included in the log information:

C305ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;COPYΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C305ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;COPYΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or copy is specified in the OPELOG environment setting parameter.

Example of a log entry:

C305 Dec 15 11:21:57 jp1admin 0 JP1_DEFAULT ;COPY -F AJSROOT1 -c -o /group/net1/job11 /group/net1/job1

The following table describes the items that are specific to these formats.

Table C‒64: Items specific to the Unit Copied or Moved log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajscopy command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajscopy command are output.

1 to 500

unit-name

The unit name specified in the executed ajscopy command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(65) Formats of the Unit Imported log entry

The following are the formats of the Unit Imported log entry.

When no process ID is to be included in the log information:

C306ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;IMPORTΔ[user-type]#Δoption

When a process ID is to be included in the log information:

C306ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;IMPORTΔ[user-type]#Δoption

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or import is specified in the OPELOG environment setting parameter.

Example of a log entry:

C306 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;IMPORT -i c:\temp\file AJSROOT1:/group/net

The following table describes the items that are specific to these formats.

Table C‒65: Items specific to the Unit Imported log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsimport command are output.

1 to 500
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(66) Formats of the Jobnet Released log entry

The following are the formats of the Jobnet Released log entry.

When no process ID is to be included in the log information:

C307ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RELEASEOPEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #Δoption

When a process ID is to be included in the log information:

C307ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RELEASEOPEΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #Δoption

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or release is specified in the OPELOG environment setting parameter.

Example of a log entry:

C307 Dec 15 13:28:49 jp1admin 0 JP1_DEFAULT ;RELEASEOPE -F AJSROOT1 -a /Production Environment/unit001 -rid 001 -rcm 2009/12/07 Release Definition -rdy 2009/12/07 -rti 20:00 -ru /Test Environment/Rel001

The following table describes the items that are specific to these formats.

Table C‒66: Items specific to the Jobnet Released log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrelease command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from JP1/AJS3 - View.

7 to 15

requesting-source-identification

The information for identifying the source requesting the operation is output. JP1/AJS2-View is displayed only when the operation was performed from JP1/AJS3 - View.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsrelease command are output.

1 to 500
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(67) Formats of the Calendar Changed log entry

The following are the formats of the Calendar Changed log entry.

When no process ID is to be included in the log information:

C401ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;CALENDARΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C401ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;CALENDARΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

  • An entry is output to the log only if all or calendar is specified in the OPELOG environment setting parameter.

  • If you used JP1/AJS3 - View to change a calendar when yes was specified in the AJSLOGOUTPUTEXTEND environment setting parameter, the changes are not output in the Command Processing Started log entry corresponding to the Calendar Changed log entry.

Example of a log entry:

C401 Dec 15 10:49:45 jp1admin 0 JP1_DEFAULT ;CALENDAR -F AJSROOT1 mo we /

The following table describes the items that are specific to these formats.

Table C‒67: Items specific to the Calendar Changed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajscalendar command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajscalendar command or the changes made by the user from JP1/AJS3 - View are output.

If no is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, one of the following values is output for option to indicate the type of change:

  • When a calendar is changed: mo

  • When a standard week value is changed: we

  • When a base date is changed: sd

  • When a base time is changed: st

If yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, the options specified in the executed ajscalendar command or the name of the definition parameter changed by the user from JP1/AJS3 - View is output for option.

The name of the definition parameter to be output is as follows when JP1/AJS3 - View is used to change the parameter:

  • When an open day is added or deleted: op

  • When a closed day is added or deleted: cl

  • When a base date is changed: sdd

  • When a base month for the calendar is changed: md

  • When a base time is changed: stt

1 to 500

unit-name

The unit name specified in the executed ajscalendar command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(68) Formats of the Unit Status Displayed log entry

The following are the formats of the Unit Status Displayed log entry.

When no process ID is to be included in the log information:

C502ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;SHOWΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C502ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;SHOWΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or show is specified in the REFLOG environment setting parameter.

Example of a log entry:

C502 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;SHOW -F AJSROOT1 -l -g 1 -X auto /group/*

The following table describes the items that are specific to these formats.

Table C‒68: Items specific to the Unit Status Displayed log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsshow command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always 0.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsshow command are output. Note that the value specified for the -f, -t, or -i option is always enclosed in double quotation marks ("").

1 to 500

unit-name

The unit name specified in the executed ajsshow command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(69) Formats of the Unit Definitions Output log entry

The following are the formats of the Unit Definitions Output log entry.

When no process ID is to be included in the log information:

C503ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;PRINTΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C503ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;PRINTΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or print is specified in the REFLOG environment setting parameter.

Example of a log entry:

C503 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;PRINT -F AJSROOT1 -a /group/*

The following table describes the items that are specific to these formats.

Table C‒69: Items specific to the Unit Definitions Output log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsprint command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always 0.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsprint command are output. Note that the value specified for the -f or -t option is always enclosed in double quotation marks ("").

1 to 500

unit-name

The unit name specified in the executed ajsprint command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(70) Formats of the Unit Definitions Backed Up log entry

The following are the formats of the Unit Definitions Backed Up log entry.

When no process ID is to be included in the log information:

C504ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;BACKUPΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

C504ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;BACKUPΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or backup is specified in the REFLOG environment setting parameter.

Example of a log entry:

C504 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;BACKUP -F AJSROOT1 -b c:\tmp\backup -e -a -n BOX /group

The following table describes the items that are specific to these formats.

Table C‒70: Items specific to the Unit Definitions Backed Up log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsbackup command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always 0.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the executed ajsbackup command are output.

1 to 500

unit-name

The unit name specified in the executed ajsbackup command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(71) Formats of the Root Jobnet Schedule Information Output log entry

The following are the formats of the Root Jobnet Schedule Information Output log entry.

When no process ID is to be included in the log information:

C506ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;SCHEDULEΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C506ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;SCHEDULEΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or schedule is specified in the REFLOG environment setting parameter.

Example of a log entry:

C506 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;SCHEDULE -F AJSROOT1 -b 2009/12/8 -e 2009/12/8 /group/net

The following table describes the items that are specific to these formats.

Table C‒71: Items specific to the Root Jobnet Schedule Information Output log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsschedule command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 to 5

option#

The options specified in the executed ajsschedule command are output.

1 to 500

unit-name

The root jobnet name specified in the executed ajsschedule command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(72) Formats of the Unit Name Output log entry

The following are the formats of the Unit Name Output log entry.

When no process ID is to be included in the log information:

C507ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;NAMEΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C507ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;NAMEΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or name is specified in the REFLOG environment setting parameter.

Example of a log entry:

C507 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;NAME -F AJSROOT1 /group/*

The following table describes the items that are specific to these formats.

Table C‒72: Items specific to the Unit Name Output log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsname command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always 0.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsname command are output.

1 to 500

unit-name

The unit name specified in the executed ajsname command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(73) Formats of the Unit Definitions Exported log entry

The following are the formats of the Unit Definitions Exported log entry.

When no process ID is to be included in the log information:

C508ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;EXPORTΔ[user-type]#Δoption

When a process ID is to be included in the log information:

C508ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;EXPORTΔ[user-type]#Δoption

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or export is specified in the REFLOG environment setting parameter.

Example of a log entry:

C508 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;EXPORT -o c:\temp\file AJSROOT1:/group/net

The following table describes the items that are specific to these formats.

Table C‒73: Items specific to the Unit Definitions Exported log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsexport command are output.

1 to 500
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(74) Formats of the Unit Status Displayed (Abnormal End) log entry

The following are the formats of the Unit Status Displayed (Abnormal End) log entry.

When no process ID is to be included in the log information:

C509ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;SHOWΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

When a process ID is to be included in the log information:

C509ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;SHOWΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

Logging conditions:

An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or show is specified in the REFLOG environment setting parameter.

Example of a log entry:

C509 Mar 05 12:18:06 [2688] jp1admin KAVS0161-I JP1_DEFAULT ;SHOW [ADMIN] -F AJSROOT1 -l -g 1 -X auto /net

The following table describes the items that are specific to these formats.

Table C‒74: Items specific to the Unit Status Displayed (Abnormal End) log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsshow command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output.

10

host-name

The name of the logical host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the ajsshow command are output. Note that the value specified for the -f, -t, or -i option is always enclosed in double quotation marks ("").

1 to 500

unit-name

The unit name specified in the ajsshow command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(75) Formats of the Unit Definitions Output (Abnormal End) log entry

The following are the formats of the Unit Definitions Output (Abnormal End) log entry.

When no process ID is to be included in the log information:

C510ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;PRINTΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

When a process ID is to be included in the log information:

C510ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;PRINTΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

Logging conditions:

An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment parameter, and all or print is specified in the REFLOG environment setting parameter.

Example of a log entry:

C510 Mar 05 12:20:56 [2552] jp1admin KAVS0161-I JP1_DEFAULT ;PRINT [ADMIN] -F AJSROOT1 -a /net

The following table describes the items that are specific to these formats.

Table C‒75: Items specific to the Unit Definitions Output (Abnormal End) log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsprint command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output.

10

host-name

The name of the logical host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the ajsprint command are output. Note that the value specified for the -f or -t option is always enclosed in double quotation marks ("").

1 to 500

unit-name

The unit name specified in the ajsprint command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(76) Formats of the Unit Definitions Backed Up (Abnormal End) log entry

The following are the formats of the Unit Definitions Backed Up (Abnormal End) log entry.

When no process ID is to be included in the log information:

C511ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;BACKUPΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

When a process ID is to be included in the log information:

C511ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;BACKUPΔ[user-type]Δ[requesting-host-IP-address,requesting-source-identification]ΔoptionΔunit-name

Logging conditions:

An entry is output to the log if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or backup is specified in the REFLOG environment setting parameter.

Example of a log entry:

C511 Mar 05 12:21:49 [1196] jp1admin KAVS0161-I JP1_DEFAULT ;BACKUP [ADMIN] -F AJSROOT1 -e -m -n box1 /net

The following table describes the items that are specific to these formats.

Table C‒76: Items specific to the Unit Definitions Backed Up (Abnormal End) log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsbackup command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output.

10

host-name

The name of the logical host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option#

The options specified in the ajsbackup command are output.

1 to 500

unit-name

The unit name specified in the ajsbackup command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(77) Formats of the Unit Name Output (Abnormal End) log entry

The following are the formats of the Unit Name Output (Abnormal End) log entry.

When no process ID is to be included in the log information:

C512ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;NAMEΔ[user-type]ΔoptionΔunit-name

When a process ID is to be included in the log information:

C512ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;NAMEΔ[user-type]ΔoptionΔunit-name

Logging conditions:

An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or name is specified in the REFLOG environment setting parameter.

Example of a log entry:

C512 Mar 05 12:22:13 [2540] jp1admin KAVS0161-I JP1_DEFAULT ;NAME [ADMIN] -F AJSROOT1 /net

The following table describes the items that are specific to these formats.

Table C‒77: Items specific to the Unit Name Output (Abnormal End) log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsname command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output.

10

host-name

The name of the logical host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the ajsname command are output.

1 to 500

unit-name

The unit name specified in the ajsname command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(78) Formats of the Jobnet Registration for Execution Information Exported log entry

The following are the formats of the Jobnet Registration for Execution Information Exported log entry.

When no process ID is to be included in the log information:

C513ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RGEXPΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C513ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RGEXPΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or rgexport is specified in the REFLOG environment setting parameter.

Example of a log entry:

C513 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RGEXP -F AJSROOT1 -e f /group/*

The following table describes the items that are specific to these formats.

Table C‒78: Items specific to the Jobnet Registration for Execution Information Exported log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrgexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsrgexport command are output.

1 to 500

unit-name

The unit name specified in the executed ajsrgexport command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(79) Formats of the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry

The following are the formats of the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry.

When no process ID is to be included in the log information:

C514ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RGEXPΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C514ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RGEXPΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or rgexport is specified in the REFLOG environment setting parameter.

Example of a log entry:

C514 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RGEXP -F AJSROOT1 -e f /group/rootnet1

The following table describes the items that are specific to these formats.

Table C‒79: Items specific to the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrgexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajsrgexport command are output.

1 to 500

unit-name

The jobnet name specified in the ajsrgexport command is output. The command exported the information about the jobnet registration for execution for the specified jobnet.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(80) Formats of the Jobnet Release Information Referenced log entry

The following are the formats of the Jobnet Release Information Referenced log entry.

When no process ID is to be included in the log information:

C515ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;RELEASEREFΔ[user-type]#ΔoptionΔunit-name

When a process ID is to be included in the log information:

C515ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;RELEASEREFΔ[user-type]#ΔoptionΔunit-name

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or release is specified in the REFLOG environment setting parameter.

Example of a log entry:

C515 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RELEASEREF -F AJSROOT1 -i /group/releasenet

The following table describes the items that are specific to these formats.

Table C‒80: Items specific to the Jobnet Release Information Referenced log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajsrelease command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the ajsrelease command are output. These options were specified when the command was used to output release information.

1 to 500

unit-name

The unit name specified in the executed ajsrelease command is output.

1 to 930
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 64 bytes, only 64 bytes are output.

If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

To Page Top

(81) Formats of the Calendar Calculation log entry

The following are the formats of the Calendar Calculation log entry.

When no process ID is to be included in the log information:

C516ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;CALUTILΔ[user-type]#Δoption

When a process ID is to be included in the log information:

C516ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;CALUTILΔ[user-type]#Δoption

#

Δ[user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:

An entry is output to the log only if all or calutil is specified in the REFLOG environment setting parameter.

Example of a log entry:

C516 Apr 15 15:32:49 jp1admin 0 JP1_DEFAULT ;CALUTIL -F AJSROOT1 -b 2016/5/1 -e 2016/5/31 -o -g /CAL/CAL1 -g /CAL/CAL2

The following table describes the items that are specific to these formats.

Table C‒81: Items specific to the Calendar Calculation log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the ajscalutil command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output.

1 or 10

host-name

The name of the host requested to perform the operation is output.

1 to 255

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

option#

The options specified in the executed ajscalutil command are output.

1 to 1110
#

If the value of an option (the part that is not the option name and the subsequent space (Δ)) exceeds 128 bytes, only 128 bytes are output.

To Page Top

(82) Formats of the Command Processing Started log entry

The following are the formats of the Command Processing Started log entry.

When no process ID is to be included in the log information:

I001ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;STARTΔcommand-nameΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

I001ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;STARTΔcommand-nameΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Example of a log entry:

I001 Dec 15 09:14:22 jp1admin - JP1_DEFAULT ;START ENTRY -F AJSROOT1 -n /group/net

The following table describes the items that are specific to these formats.

Table C‒82: Items specific to the Command Processing Started log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the applicable command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always a hyphen (-).

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

command-name

The applicable command name is output in upper-case alphabetic characters.

Example:

For the ajsentry command, the prefix (ajs) is removed and the remainder of the name is output in upper case (ENTRY).

7 to 11

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option

The options specified in the executed command are output.

1 to 500

unit-name

The unit name specified in the executed command is output.

1 to 930
Note

The Command Processing Started log entry might not be output if an incorrectly specified option value results in an error or a non-existing unit name is specified. The log entry also might not be output if, while JP1/AJS3 - View is being used, an error occurs before definitions are updated or the existing definitions are not changed.

To Page Top

(83) Formats of the Command-to-Scheduler Service Processing Request Started log entry

The following are the formats of the Command-to-Scheduler Service Processing Request Started log entry.

When no process ID is to be included in the log information:

I002ΔdateΔtimeΔuser-nameΔmessage-IDΔhost-nameΔ;REQUESTΔcommand-nameΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

When a process ID is to be included in the log information:

I002ΔdateΔtimeΔ[process-ID]Δuser-nameΔmessage-IDΔhost-nameΔ;REQUESTΔcommand-nameΔ[user-type]#Δ[requesting-host-IP-address,requesting-source-identification] #ΔoptionΔunit-name

#

Δ[user-type]Δ[requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Example of a log entry:

I002 Dec 15 09:14:22 jp1admin - JP1_DEFAULT ;REQUEST ENTRY -F AJSROOT1 -n /group/net

The following table describes the items that are specific to these formats.

Table C‒83: Items specific to the Command-to-Scheduler Service Processing Request Started log entry (scheduler information log)

Item

Description

Length (bytes)

user-name

The name of the JP1 user who executed the applicable command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output.

0 to 20

message-ID

Always a hyphen (-).

1

host-name

The name of the host requested to perform the operation is output.

1 to 255

command-name

The applicable command name is output in upper-case alphabetic characters.

Example:

For the ajsentry command, the prefix (ajs) is removed and the remainder of the name is recorded in upper case (ENTRY).

7 to 11

user-type

The type of the user (ADMIN or USER) who performed the operation is output.

  • ADMIN

    A user with administrator privileges or superuser privileges

  • USER

    A general user

4 or 5

requesting-host-IP-address

The IP address of the host used to perform the operation is output.

This item is output only when the operation was performed from one of the following programs or when the command was remotely executed.

  • JP1/AJS3 - View

  • JP1/AJS3 - Web Console

  • JP1/AJS3 - Definition Assistant

IPv4: 7 to 15

IPv6: 3 to 39

requesting-source-identification

The information for identifying the source requesting the operation is output. This item is output only when the operation was performed from JP1/AJS3 - View, JP1/AJS3 - Web Console or JP1/AJS3 - Definition Assistant, or when the command was remotely executed.

  • JP1/AJS2-View

    Indicates that the operation was performed from JP1/AJS3 - View.

  • JP1/AJS3-WEB

    Indicates that the operation was performed from JP1/AJS3 - Web Console.

  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)

    Indicates that the operation was performed from JP1/AJS3 - Definition Assistant.

  • REMOTE

    Indicates that the user remotely executed the command or that a remote jobnet executed the command.

If the length of the information exceeds 100 bytes, only 100 bytes are output.

1 to 100

option

The options specified in the executed command are output.

1 to 500

unit-name

The unit name specified in the executed command is output.

1 to 930
Note

The Command-to-Scheduler Service Processing Request Started log entry is not output if an error occurs before a processing request is issued to the scheduler service (for example, an incorrectly specified option value results in an error or a non-existing unit name is specified).

In the following cases, the log entry is output twice for a single execution of the command:

  • The -C option is specified in the ajssuspend command.

  • The -a or -c option is specified in the ajsrelease command.

To Page Top

Copyright (C) 2019, 2022, Hitachi, Ltd.

Copyright (C) 2019, 2022, Hitachi Solutions, Ltd.