1.2.6 Whether log file settings can be changed

System management log

Y

N

Y

Disk space

This setting can be changed by using the LOGSIZE environment setting parameter (for system management logs).

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

This setting can be changed by using the LOGFILENUM environment setting parameter.

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Scheduler log (existing per scheduler service)

Y

Y

N

Disk space

To change this setting, use the jajs_config command to set the LOGSIZE environment setting parameter.

For details about how to estimate the required disk space, see 3.4.1 Estimating the size of scheduler log files in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSLOGFILE1 and AJSLOGFILE2 environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Scheduler log (existing per host)

Y

Y

N

Disk space

To change this setting, use the jajs_config command to set the HOSTLOGSIZE environment setting parameter.

For details about how to estimate the required disk space, see 3.4.1 Estimating the size of scheduler log files in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the HOSTLOGFILE1 and HOSTLOGFILE2 environment setting parameter.

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

ajsinetd internal log

Y

N

N

Disk space

To change this setting, use the jajs_config command to set the AJSINETDLOGSIZE environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

ajscdinetd internal log

Y

N

N

Disk space

To change this setting, use the jajs_config command to set the AJSCDINETDLOGSIZE environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

ajsmonsvr internal log

Y

N

N

Disk space

To change this setting, use the jajs_config command to set the CDMONSVRLOGSIZE environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Common scheduler trace log

Y

Y

N

Disk space

To change this setting, use the ajstrsetsz command.

Output destination

The default output destination folder or directory is used even in a cluster configuration.

This setting can be changed by using the TRACELOGFILE environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Scheduler trace log of each scheduler service

Y

Y

N

Disk space

To change this setting, use the ajstrsetsz command.

Output destination

The default output destination folder or directory is used even in a cluster configuration.

This setting can be changed by using the TRACELOGDIVDIR environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Flow control subprocess internal log

Y

Y

N

Disk space

To change this setting, see 3.4.6 Estimating the size of log files output by a flow control subprocess in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for scheduler service).

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

performance log file

Y

Y

N

Disk space

To change this setting, use the jajs_config command to set the AJSREPORTSTOREDAYPERIOD environment setting parameter.

For details about how to estimate the required disk space, see 3.4.8 Estimating the size of performance log files in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSREPORTDIR environment setting parameter.

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Job execution manager log

In Windows:

Mgr_Path\log\schedule\scheduler-service-name\jpqmanexec{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}.log

In UNIX:

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqmanexec{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}.log

Y

Y

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for scheduler service).

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M

Job execution manager log

In Windows:

Mgr_Path\log\jpqmanexec{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}.log

In UNIX:

/var/opt/jp1ajs2/log/jpqmanexec{1|2|3|4|5|6|7|8|9|10|11|12|13|14|15}.log

Y

N

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M

Job execution status report log

Y

Y

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for scheduler service).

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M

Job execution agent log

Y

N

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Job execution client log

Job execution internal log

In Windows:

Mgr_Path\log\schedule\scheduler-service-name\jpqmanager\jpqman_{00|01|02|03}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqmanager\jpqmandb_{00|01|02|03}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqmanager\jpqmannjp_{00|01|02|03}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqmanager\jpqnjpdata_{00|01}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqnotify\jpqnotify_{00|01}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqnotify\jpqnotifynjp_{00|01}.log

Mgr_Path\log\schedule\scheduler-service-name\jpqnotify\jpqnjpdata_{00|01}.log

In UNIX:

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqmanager/jpqman_{00|01|02|03}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqmanager/jpqmandb_{00|01|02|03}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqmanager/jpqmannjp_{00|01|02|03}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqmanager/jpqnjpdata_{00|01}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqnotify/jpqnotify_{00|01}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqnotify/jpqnotifynjp_{00|01}.log

/var/opt/jp1ajs2/log/schedule\scheduler-service-name\jpqnotify/jpqnjpdata_{00|01}.log

Y

Y

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for scheduler service).

For details, see 20.4.2 Details of the environment setting parameters for scheduler services in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M

Job execution internal log

(A job execution internal log that stores the data that is not recorded in the preceding logs.)

Y

N

Y

Disk space

To change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Log file number

For details about how to change this setting, see 3.4.5 Estimating the size of the logs output by execution in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Job execution result log file

Y

Y

Y

Disk space, output destination, and log file number

For details about how to change these settings see 3.4.9 Estimating the size of job execution result log files and event job execution result log files in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Job execution history log file

Y

N

Y

Disk space

To change this setting, see G.2(3) Estimating the job execution history log file in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Log file number

This setting can be changed by using the JobHistoryLogFileCount environment setting parameter.

For details, see 20.5.2 Details of the environment setting parameters for the job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

A

Event/action control manager log

Y

Y

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

The method for changing this setting depends on the log type.^#1

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M

Event/action control agent log

Y

Y

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the WaitInfFileOutDir environment setting parameter (for agent processes).

For details, see 20.6.2 Details of the environment setting parameters for event/action control in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Event monitoring log

Y

Y

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the WaitInfFileOutDir environment setting parameter (for agent processes).

For details, see 20.6.2 Details of the environment setting parameters for event/action control in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Event search log

File monitoring log

Execution interval control log

Email sending job log (when Outlook not used)

Y

Y

N

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the WaitInfFileOutDir environment setting parameter (for agent processes).

For details, see 20.6.2 Details of the environment setting parameters for event/action control in the JP1/Automatic Job Management System 3 Configuration Guide.

W

M, A

Mail monitoring log (common)

Y

Y

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

The method for changing this setting depends on the log type.^#2

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W

M, A

Mail monitoring log

U

Mail monitoring log (when mail linkage is performed on the desktop)

Y

Y

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

Information is also output to a folder on the physical host in a cluster system. This setting can be changed by using the WaitInfFileOutDir environment setting parameter (for agent processes).

For details, see 20.6.2 Details of the environment setting parameters for event/action control in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W

M, A

Mail monitoring log (when mail linkage is performed in the service)

Mail delivery log

Y

N

Y

Disk space

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Log file number

For details about how to change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

U

M, A

Event/action common log

Y

N

N

Disk space

The default output destination folder or directory is used even in a cluster configuration.

To change this setting, see 3.4.3 Estimating the size of the log information output by event jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Event job execution result log file

Y

Y

Y

Disk space, output destination, and log file number

For details about how to change these settings, see 3.4.9 Estimating the size of job execution result log files and event job execution result log files in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

W, U

M, A

Queueless log

Y

Y

N

Disk space

To change this setting, use the jajs_config command to set the AJSQL_LOGSIZE environment setting parameter.

For details about how to estimate the required disk space, see 7.2.1(1) Estimating the size of the queueless log file in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

This setting can be changed by using the AJSQL_LOGFILE environment setting parameter.

For details, see 20.10.2 Details of the environment setting parameters for the queueless job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Queueless trace log

Y

Y

N

Disk space

The default output destination folder or directory is used even in a cluster configuration.

To change this setting, use the ajsqltrsetsz command.

Output destination

This setting can be changed by using the AJSQL_TRACELOGFILE environment setting parameter.

For details, see 20.10.2 Details of the environment setting parameters for the queueless job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Queueless job execution internal log

Y

Y

N

Disk space

To change this setting, use the ajsqlexecsetsz command.

For details about this command, see ajsqlexecsetsz in 4. Commands Used for Special Operation in the manual JP1/Automatic Job Management System 3 Command Reference.

For details about how to estimate the required disk space, see 7.2.1(3) Estimating the size of the internal execution logs for queueless jobs in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide.

Output destination

The method for changing this setting depends on the log type.^#

W, U

M, A

The status file used to store information about running queueless jobs

Y

Y

N

Disk space

To change this setting, see 20.10 Setting up the queueless job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

Output destination

This setting can be changed by using the AJSQL_STATFILE environment setting parameter.

For details, see 20.10.2 Details of the environment setting parameters for the queueless job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Definition check log

Y

Y

N

Disk space

The default output destination folder or directory is used even in a cluster configuration.

To change this setting, see 6.5.1 Setting up the JP1/AJS3 definition pre-check function in the JP1/Automatic Job Management System 3 Configuration Guide.

Output destination

For details about how to change this setting, see 6.5.1 Setting up the JP1/AJS3 definition pre-check function in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Definition check trace log

Y

Y

N

Disk space

The default output destination folder or directory is used even in a cluster configuration.

To change this setting, use the ajschktrsetsz command.

If you do not use the JP1/AJS3 Check Manager function or the JP1/AJS3 Check Agent function, no trace log file is created.

Output destination

For details about how to change this setting, see 6.5.1 Setting up the JP1/AJS3 definition pre-check function in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Agent management log

N

Y

N

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for system management).

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Communication control trace log

N

Y

N

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for system management).

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

U

M

Communication control log

ajsdbmgrd internal log

N

Y

N

Output destination

This setting can be changed by using the AJSLOGDIR environment setting parameter (for system management).

For details, see 20.3.2 Details of the environment setting parameters for the system management in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M

Flexible job execution requester log file

Y

N

N

Disk space

This setting can be changed by using the FXREQ_LOGSIZE environment setting parameter.

For details, see 20.9.2 Details of the environment setting parameters for the flexible-job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Flexible job execution host log file

Y

N

N

Disk space

This setting can be changed by using the FXEXEC_LOGSIZE environment setting parameter.

For details, see 20.9.2 Details of the environment setting parameters for the flexible-job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Broadcast agent

Y

N

N

Disk space

This setting can be changed by using the FXBCCTL_LOGSIZE environment setting parameter.

For details, see 20.9.2 Details of the environment setting parameters for the flexible-job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

Broadcast-execution destination agent log file

Broadcast agent log file

Y

N

N

Disk space

This setting can be changed by using the FXDSTR_LOGSIZE environment setting parameter.

For details, see 20.9.2 Details of the environment setting parameters for the flexible-job execution environment in the JP1/Automatic Job Management System 3 Configuration Guide.

W, U

M, A

jajs_killall.cluster command trace log

N

Y

N

Output destination

For details about how to change this setting, see 10.4.1 Script for forcibly stopping JP1/AJS3 (jajs_killall.cluster) in the JP1/Automatic Job Management System 3 Administration Guide.

U

M

JP1/AJS3 - View information log

Y

N

N

Disk space

To change this setting, change the Max. log file size setting in the Other tab of the Preferences dialog box in JP1/AJS3 - View.

W

V

Command log

Y

N

Y

Disk space

To change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 3.4.3(5)(e) COM_LOG_SIZE in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 3.4.3(5)(g) COM_LOG_NUM in the JP1/Automatic Job Management System 3 Configuration Guide.

W

W

Y

N

Y

Disk space

To change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 13.3.3(5)(d) COM_LOG_SIZE in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 13.3.3(5)(f) COM_LOG_NUM in the JP1/Automatic Job Management System 3 Configuration Guide.

U

W

Application server log

Y

N

Y

Disk space

To change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 3.4.3(5)(i) SERVER_LOG_SIZE in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 3.4.3(5)(k) SERVER_LOG_NUM in the JP1/Automatic Job Management System 3 Configuration Guide.

W

W

Y

N

Y

Disk space

To change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 13.3.3(5)(h) SERVER_LOG_SIZE in the JP1/Automatic Job Management System 3 Configuration Guide.

Log file number

For details about how to change this setting, see 4.6.1(1) Log sizes and the number of log files output by the Web Console server in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide, and 13.3.3(5)(j) SERVER_LOG_NUM in the JP1/Automatic Job Management System 3 Configuration Guide.

U

W