21.8.2 Settings for linkage with a host that is not the container host machine
If a container in which JP1/AJS3 - Agent is installed needs to link with a host that is not the container host machine, make sure that the container and the host can communicate with each other (in both directions) via TCP/IP. For details about the procedure for specifying the required communication settings, see the JP1/Base User's Guide.
To use the port forwarding function, specify the communication settings so that not only the port numbers used by JP1/Base, but also the port numbers used by JP1/AJS3 - Agent, are forwarded. For details about the port numbers used by JP1/AJS3 - Agent, see A.1(2) JP1/AJS3 - Agent port numbers in the JP1/Automatic Job Management System 3 System Design (Configuration) Guide. In addition, if the port forwarding function is used to make communication settings, the following services cannot be started on container host machines because of conflicts in ports.
-
JP1/AJS3 Queueless Agent service
-
JP1/AJS3 Autonomous Agent Messenger service
-
JP1/AJS3 Check Agent service
For this reason, if you want to use queueless jobs, flexible jobs, and the definition pre-check function for both containers and container host machines, make communication settings by using a macvlan bridge.